See what our Experts say about this Optronics Trailer Lights

• What Reflector and Clearance Lights do I Need for My 6 x 12 Dump Trailer?
  Hello Kurt, I can definitely help you out with the right clearance and side markers for your 6 x 12 dump trailer. I attached an image to reference for the lights/reflectors, these are the DOT requirements: - Rear reflector (#4 on diagram) 2 of the # PE72ER - Rear-side marker light/reflector (#6a/6b) 2 of the # MCL32RB - Front Side marker light/reflector (#7a/7b) 2 of the # MCL32AB You will want to use at least 16 gauge wire and some butt connectors like # DW05744-10. Don't forget...
  view full answer...
• Installing LED Clearance Lights With 2 Wires
  Two-wire LED clearance lights such as the Red # MCL32RB or the Amber # MCL44AB have one wire for the power lead and one ground wire. The wire that was attached to your old clearance lights will be spliced to the power wire of your new lights. The black is power and white is ground for these lights. If you take a look at the video I have linked you can see how these lights are installed. I have also attached a couple of links to help articles on trailer wiring which you should find useful.
  view full answer...
• Recommended Red LED Clearance Light Replacement for a Trailer
  For whatever reason the red version of the Bargman LED Clearance or Side Marker Light # 47-59-002 has been discontinued but we do have the LED Trailer Clearance or Side Marker Light w/ Reflex Reflector # MCL32RB which has the exact same dimensions as the red version and will work great as a replacement.
  view full answer...
• Need Replacement Tail Light Lens For SAE P2 A 99 Light On Lazy Daze RV
  Hello Don, thanks for reaching out. Normally the SAE number isn't a reliable way to find the correct replacement as it is not a part number. I have seen this number come up before and we do have it in our records. It comes back as a 4" x 2" red clearance light from Bargman. Sadly, this light and lens are no longer available so our best option would be to replace the light entirely. For that, I recommend the following: - LED Trailer Clearance or Side Marker Light w/ Reflex Reflector...
  view full answer...
• Replacement Clearance Light Lens Options for Glo-Brite 122r
  Hey Stan, I did a little digging and it looks like the Glo-Brite 122 style red and yellow lights and lenses are no longer made or available. I found a few folks who ran into the same issue as you and had to replace their lights with new lights that were similar in design. The closest light we have to that old Glo-Brite model is the Optronics Clearance Lights # MCL32RB if you want LED or # MC32RB if you want incandescent. These lights are only about 1/4 of an inch taller than your original...
  view full answer...
• Looking For Replacement Light Lens For 2011 Puma Travel Trailer
  Hello Barbara, thanks for reaching out. I can point you in the right direction, but the SAE number is not actually a part number for the light, so there is no way to use this to know exactly what light you have. The SAE number just means the light is compliant with DOT/SAE regulations, and this number can be found on most any trailer light. The best way to determine what lens you need will be to either find the part number for your light, or to compare the size and shape of the light...
  view full answer...
• Replacement Light for Optronics Red Clearance Light 20327-02
  Optronics discontinued their light model 20327-02 some years back and we no longer have lens or base parts for it. You can instead use part # MC32RB for an incandescent light or part # MCL32RB for a high-efficiency LED type. Both have a white base.
  view full answer...
  
• Replacement LED Marker Lights for a 2009 Timberlodge Camper
  Thanks for providing the picture. It looks like your current marker light is around 3 3/4" long and 1 1/2"- 2" wide and has mounting holes 3" apart. While we don't have anything in those exact dimensions, we do have several that are slightly larger so when you replace yours you will be able to completely cover the space the old lights used to be. I am slightly concerned about the width of your current light and how it fits in the groves on the side of your camper. I am going to recommend...
  view full answer...
  
• Replacing The Light And/Or Lens On A Bargman 34-59-010 LED Light
  I do have an option for you but unfortunately the Bargman lens 34-59-010 you are looking for is no longer available. The lights themselves are also not available. I can offer you a virtually identical light in the Optronics # MCL32RB. This is a 4" long x 2" tall x 1' deep red LED clearance or side marker light, and will be virtually identical to your Bargman LED lights.
  view full answer...
• Red Lens Replacement Sae-a-p2-dot-14 For A 2018 Keystone Camper
  The Replacement Amber Lens for MC32AB Trailer Lights # A32AB is a direct replacement for the Sae-a-p2-dot-14 that measures 4" L x 2" W x 1/2" H. A red lens replacement with the same dimensions is the LED Trailer Clearance or Side Marker Light w/ Reflex Reflector # MCL32RB. Included are video resources with more information from here.
  view full answer...
• LED Replacement Trailer Lights for Optronics 20327-02
  We have exactly what you need directly from Optronics. You can get them with either a white base or a black base depending on what you need to match your trailer. White Base Red - # MCL32RB Amber - # MCL32ATB Black Base Red - # MCL32RBB Amber - # MCL32ABB Attached are some review videos for you to check out.
  view full answer...
• Replacement Lens for Red Clearance Light on 2017 Forest River R-Pod Travel Trailer
  The LED Trailer Clearance or Side Marker Light w/ Reflex Reflector - 3 Diodes - White Base - Red Lens # MCL32RB does have just the lens available as part # A32RB. If that is your light, you will be able to just swap the lens. I've linked the page to all our options to assist if you have a different size or style light.
  view full answer...
• Replacement Marker Light Lens For A 2015 Jayco Jay Flight 195RB SLX
  The light you are describing sounds very much like the Optronics # MCL32RB. It fits all of your parameters at a 4" long and 2" wide gently curved rectangle with rounded corners. If you are in need of just the lens we have that as part # A32RB. We do not have a way to know exactly what brand or model of light you have based off of the year make and model of camper, but it sounds like this is what you have. Are there any numbers on the base of the light that you can see? A lot of times...
  view full answer...
• Looking For Clearance Light To Replace Bargman 59 SAE A P2 83
  Hello Robert. I was able to cross reference the part number you provided to the Bargman #59 Series clearance lights. These lights have unfortunately been discontinued, so a direct replacement is not available. We do have a light that is virtually identical, the Optronics LED Trailer Clearance or Side Marker Light # MCL32RB for red and # MCL32AB for amber. This light is 4" long x 2" tall x 1" deep so identical in size to your old Bargman lights.
  view full answer...
• Replacement Clearance Lights Options For a 1991 Newmar American Star 25RK 5TH Wheel RV Camper
  Yes, we do have these lights available in both incandescent or LED. The lights will all have a white base and the lights have an overall size of 4" long by 2" wide and 1" deep. Incandescent Red Lens # MC32RB LED Amber Lens # MCL32AB LED Red Lens # MCL32RB Amber Replacement Lens # A32AB Red Replacement Lens # A32RB I recommend getting a couple spare lenses in the event one of them becomes damaged while driving.
  view full answer...
• Replacing Existing Clearance Lights on a Lancer Camper with Yellow and Green Wiring
  Trailer clearance lights have one wire for the power and one wire for the ground. You'll need to test your trailer light wiring with a Digital Multimeter to determine which color controls which function. There are no standard guidelines for trailer wiring so I can not tell you which wire does what. I recommend item # PT89ZR this multimeter will allow you to safely troubleshoot a variety of electrical circuits and help you to identify which wire is for power and ground. I recommend the...
  view full answer...
• Does the Clearance Light # MCL32AB and the # MCL32RB Have Gaskets
  The part # MCL32AB and the # MCL32RB do not come with gaskets. But you could use sealant like part # 0160297 to make one if you needed.
  view full answer...
• Replacement Red Clearance Light for 2012 Keystone Fuzion 5th Wheel Toy Hauler
  I reviewed photos of your 2012 Keystone Fuzion 5th Wheel toy hauler (one is linked) and based on those it looks like the red side light you need is Optronics Trailer Clearance or Side Marker LED Light # MCL32RB which measures 4 x 2 x 1-inch and which mounts on 3-inch centers. Other similar lights include LED model # MCL31RB and incandescent model # MC32RB. Trailer makers do not maintain specs for smaller items like lights so just check your overall light size and mounting hole spacing...
  view full answer...
  
• How To Identify Trailer Marker Clearance Lamp to Find Correct Replacement
  Are you speaking of a clearance/marker light? If so, the numbers you provided state that the lamp's lens is compliant with certain DOT regualations, but isn't necessarily an identifier that would help in finding a correct replacement. I'd recommend checking the lamp housing itself, and examine it closely for a part number. If I can get the actual part number of the lamp itself, or a photo with dimensions I can recommend a replacement lens or lamp if a lens isn't available. The # MCL32RB...
  view full answer...
  
• Clearance and Side Marker Lights That Are Made In The USA
  The Optronics Red LED Trailer Clearance or Side Marker Light # MCL32RB will come from their factory in Taiwan. If you are looking for clearance lights that are made in the USA I recommend the Peterson Double Bullseye Clearance and Side Marker Trailer Light in Red # 425800 or Amber # 425600. These have the same 4" long by 2" wide footprint but use bulbs rather than LED's. The bulbs can be swapped for LED's # DI88VR if you prefer the lower power draw and longer life of LED lights.
  view full answer...
• Replacement Clearance Light for Escape Trailer
  Thanks for the photos and it looks like you have found exactly what you need with the LED Trailer Clearance or Side Marker Light # MCL32RB. This light measures 2 inches tall (and 4 inches long), which is what it looks like yours measures, and it has mounting holes that are 3 inches apart on center, which I'm guessing is what you got when you measured that. This light will work well as a replacement for you. I've added a link to a video review as well.
  view full answer...
  
• Availability of Gasket for Marker Lights on Motorhome
  There is not specific gasket made for either the # 47-59-001 or the # MCL32RB trailer clearance lights but I do have a solution for you. I've attached an installation video that shows our installer using the TremPro Silicone Sealant # 0160297. This will create a waterproof seal or gasket for your new lights. The gasket that may work for you, but is designed for the MC series lights is # A32GB. This gasket was designed to fit 4 inch by 2 inch lights. I have linked the above mentioned...
  view full answer...
• Looking for Replacement Lens for Fruehauf # LCE-8750 Clearance Lamp
  We don't offer a replacement lens for a Fruehauf LCE-8750, but we do offer a equivalent lamp from Optronics, part # MCL32RB for the LED version or # MC32RB for the incandescent. We do offer a replacement lens for the incandescent version, which is part # A32RB. I can state with certainty that the replacement lens will fit the Optronics lamp, but since they're different manufacturers, I can't guarantee that the replacement lens will fit your existing LCE-8750 lamp. You can gamble that...
  view full answer...
• What are Small Lights on Trailer that Are Found on Sides and Corners of Trailer
  Those are called clearance lights. They come on when the headlights/running lights are engaged and give the trailer a bit more visibility when the lighting is low. I attached a link to a page that has all of our clearance lights plus an article that covers trailer lighting requirements based on size.
  view full answer...

Do you have a question about this Trailer Light?