1. Trailer Leaf Spring Suspension
  2. Universal Group
  3. Leaf Springs
  4. Springs
  5. Double Eye Springs
  6. 26 Inch Long
6-Leaf Double-Eye Spring for 4,500-lb Trailer Axles - 26" Long

6-Leaf Double-Eye Spring for 4,500-lb Trailer Axles - 26" Long

lowest price pledge
Our Price: $66.46
Trailer Leaf Spring Suspension
Orders above $99 qualify for Free Shipping
Shipping Weight: 16 lbs
Quantity: 
Universal Group Springs - SP-256275
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Need help with installation?
Locate installers near me
Double-eye leaf spring acts as part of a trailer's suspension system by providing an attachment point for a 4,500-lb axle. Spring flexes to resist shock and also ensures a smooth ride. Includes bushings with 9/16" inner diameter. Lowest Prices for the best trailer leaf spring suspension from Universal Group. 6-Leaf Double-Eye Spring for 4,500-lb Trailer Axles - 26" Long part number SP-256275 can be ordered online at etrailer.com or call 800-298-1624 for expert service.
  • All Info
  • Reviews (100)
  • Q & A (118)
  • Photos
  • Why etrailer?

Universal Group Trailer Leaf Spring Suspension

  • Leaf Springs
  • Springs
  • Double Eye Springs
  • 26 Inch Long
  • 4500 lbs
  • Universal Group

Double-eye leaf spring acts as part of a trailer's suspension system by providing an attachment point for a 4,500-lb axle. Spring flexes to resist shock and also ensures a smooth ride. Includes bushings with 9/16" inner diameter.


Features:

  • Leaf spring acts as part of your trailer's suspension system
    • Provides attachment point for your trailer's axle
  • Multiple leaves allow flexibility to absorb road shock
    • Allows for a smooth ride
    • Reduces wear and tear on trailer
    • Ensures level ride on bumpy and uneven surfaces
  • Sturdy steel construction
  • Nylon bushings included
  • Pre-mounted hangers or aftermarket hanger kit (sold separately) required for installation
    • Spring attaches to hanger mounted on trailer frame at one end
    • Other end connects to shackle straps suspended from hanger or equalizer


Specs:

  • Quantity: 1 leaf spring
  • Spring capacity: 2,250 lbs
  • Axle capacity: 4,500 lbs
  • Length from center of spring eye to center of spring eye: 26"
  • Spring width: 1-3/4"
  • Eye diameter with bushing: 9/16"
    • Eye diameter without bushing: 11/16"
  • Leaf thickness: 3/8"
  • Number of leaves: 6
  • Additional dimensions: see table


Double-Eye Spring

Part NumberABCD
SP-25627513"14"26"3-3/4"


Note: To ensure proper axle alignment and suspension performance, leaf springs should always be replaced in pairs.


Leaf springs are an integral part of your trailer suspension system. The leaf springs provide the attachment points for your trailer's axle, suspending it from the frame of your trailer. Each spring flexes to absorb road shock as you travel, allowing the axle to move somewhat independently of the rest of your trailer. This helps to reduce wear and tear on the trailer and also ensures a smooth ride.


Double-eye leaf springs attach to hangers that are welded onto your trailer. One end of this spring will attach directly to the hanger with a suspension bolt. The other end will attach to shackle straps that are suspended from a hanger. These straps allow the spring to move and pivot so that it can better compensate for uneven pavement. If you have a tandem- or triple-axle trailer, the shackle straps will be attached to the equalizer that connects multiple springs.


To mount this spring, you will need hangers, shackle straps, and suspension bolts. If you are simply replacing a spring, you may still have hangers welded onto your trailer. You should, however, replace your shackle straps because they are usually the first component to wear out. You may choose to replace old suspension bolts as well. It is recommended that you replace the other leaf spring in your setup at the same time. Because springs can sag and elongate as they wear, this new spring may not exactly match the old one, and the alignment of your trailer could be affected.


If you are fabricating a trailer, you will need to purchase a hanger kit for installation. To determine the type of hanger kit that you need, you must know the specific type of leaf spring that you have, as well as your axle capacity. Depending on the hanger kits used with them, springs can be configured to work for single-, tandem- or triple-axle applications. Hangers and other suspension components can also be purchased separately if there isn't a complete kit that works for your setup.



UNA-256 Universal Group Double Eye Trailer Leaf Spring - 6 Leaf - 2,250-lb Capacity

Replaces PR626

Item # SP-256275






Customer Reviews

6-Leaf Double-Eye Spring for 4,500-lb Trailer Axles - 26" Long - SP-256275

Average Customer Rating:  4.8 out of 5 stars   (100 Customer Reviews)

Double-eye leaf spring acts as part of a trailer's suspension system by providing an attachment point for a 4,500-lb axle. Spring flexes to resist shock and also ensures a smooth ride. Includes bushings with 9/16" inner diameter.

- SP-256275
by:

Old springs rusted out and were cracked. New mounts were welded up and springs installed. They work great. Probably a little to heavy for my specific application.


Comments
Great product. Exactly what I needed to upgrade my trailer.
Alexander P - 03/28/2021


- SP-256275
by:

I ordered leaf springs and associated attachment hardware. I was quite amazed at how quickly the order was delivered even though the box weighed close to a hundred pounds. The order was complete and error free. The trailer was much improved by the installation and I look forward to using it. I have used etrailer.com in the past and it's my first internet stop for trailer parts.


Comments
No change. Still happy with the springs.Thanks
Jim J - 10/23/2015



- SP-256275
by:

I chose these leaf springs to aid in leveling my fifthwheel as my pin box could not be adjusted anymore to avoid contact with the bed side rails. Another reason, I was not seeking to increase load capacity as that would make the axel the weak point in the suspension. Given the state of repairs to our highways today, the 6 stack leaf springs will support each of the springs far better than the OEM 4 stack.



- SP-256275
by:

I actually ordered these for 65 Coronet Altered Wheelbase car for the front end using an A-100 straight axle. The short 13" dimension from the center bolt to the spring eye makes this perfect for my application. Mixing trailer with car spring attachments was a challenge but doable. Enclosed are pictures of how it was mocked up with a relocation of 12" forward from stock. I wasn't able to use the U bolts as they were a different dimension and diameter than the existing A-100 axle. Using the front bolts with the Zerk fitting will be an added advantage being greasable.



- SP-256275
by:

Replaced old tired springs. Extra leaf raised trailer slightly. Worked great. Bolted right up.


Comments
A+
Derek S - 04/26/2021


- SP-256275
by:

Order came in super fast and free shipping! Look forward to installing them this week on my trailer.



- SP-256275
by:

Best upgrade for the trailer hauling heavier load and wheels are running truer



- SP-256275
by:

Broke a spring on my bass boat the night before a tournament found these guys online ordered and the springs were here to the west coast in 4 days ! Great product, fast shipping and great customer service . They kept me up to date thru the whole process. Def would recommend.



- SP-256275
by:

I think they're better Springs in what I had I don't know if it'll ride rougher than the four-leaf that are in there but the four leaf in there are flat no Arch time will tell



- SP-256275
by:

Upgraded my 1961 Shasta to 6 leaf after a broken 5 leaf happened. All new and good for another 60 years! Thanks!



- SP-256275
by:

Received the springs yesterday. They look good. Quick shipping. Will install in couple of days, then time will tell how they hold up. Thank you.



- SP-256275
by:

Springs came in great an fast an even showed up a day early



- SP-256275
by:

Replaced an old 4 leaf set. Which worked out great trailer rides extra smooth



- SP-256275
by:

Would give a better review, but the description of the leaf spring pack did not include the thickness of the pack which made it very difficult to shop for a u-bolt kit.


Comments
Each leaf is 38 inch thick. This 6-leaf pack comes in around 2-14 inches thick.
-- Etrailer Expert Victoria B - 07/29/2020


- SP-256275
by:

Too long of a wait for the product. Customer service was excellent with follow up.



- SP-256275
by:

Prompt shipment and arrival. It was a few days before I installed one. The old ones which are probably original equipment ( it's a 1975 trailer) were a real pain to get off, but the new one was a perfect fit. I did the right side since it was broken, then took the trailer out and it worked fine. I am still getting the left side off, but I'm sure that the new one will be fine.


Comments
Everything is still working fine.
Larry E - 12/09/2017



- SP-256275
by:

Again look like they are correct springs. All measurements proper but will have to wait until May to install them due to trailer in storage



- SP-256275
by:

Same review as on other parts that came together: I ordered several things from Etrailer, all of which were great quality. There was a problem though...I did order online and reversed house number by accident and order didn’t arrive as anticipated. That said, even though shipping was my goof, Etrailer (Natalie and George) contacted the shipper, ran it down, corrected my error, and I got my items the same day. Wow, talk about exceptional customer service. Etrailer gets 5/5 stars from me. Could not ask for better service, and my parts...trailer springs too, were excellent. Thanks!!!! Chuck



- SP-256275
by:

First, I want to thank Adam R. for his help in the selection of the right spring. It installed perfectly within 4 to 6 hours. Everything matched up without any trouble. The biggest problem was getting the old spring off. It took 4 to 5 days. The spring was delivered ahead of the designated delivery date. This is the second item I have order from E Trailer and I have had great results on both items.


Comments
Just fine
Donald K - 07/07/2015



- SP-256275
by:

Good springs



- SP-256275
by:

Price was good, quality is good, customer service was helpful, delivery was fast. Just like every other time I've ordered from etrailer. The only reason I didn't give 5 stars is because the packaging could've been better. The springs were coming through the side of the box.



- SP-256275
by:

The springs arrived quickly and are the proper fit. The packing materials were insufficient, however. By the time the springs arrived they were bursting out of the box. Another day of handling and they would have been damaged. They were slightly abraded, but they are trailer springs, so it's no big deal. Springs: Excellent Packing: Poor



- SP-256275
by:

i was very happy with the service, my leaf springs come sooner than promised, i will definitely use etrailer for all my trailer parts in the future



- SP-256275
by:

Couldn't figure out how I was going to fix an old trailer we've had for years and someone told me about etrailer.com , got everything I needed to put a complete new suspension under it , everything was a perfect fit and worked out great . Would and do recommend them .



- SP-256275
by:

Works great. I mounted these on a 16' flat bed trailer. I use the trailer to haul my truck camper and ATV. Glad i didnt go any stiffer.


28
103
Show More Reviews

Ask the Experts about this Universal Group Trailer Leaf Spring Suspension

  • Recommended Replacement Suspension for 6K Tandem Axles
    Thanks for the measurements. I recommend using the 6-Leaf Double-Eye Spring for 6,000-lb Trailer Axles - 26" Long # SP-053275. Then use the Dexter Heavy-Duty Suspension Kit for Tandem-Axle Trailers - 1-3/4" Wide Double-Eye Springs # K71-448-00. This is a heavier duty assembly with wet bolts for easy lubrication and heavy-duty shackle straps.
    view full answer...
    Image 1 for
  • Replacement Leaf Springs for a 4400-LB Axle on a 2016 Grand Design Refrlection
    For your 2016 Grand Design Reflection 29RS, we have two possibilities for replacement springs that work for 4400-lb axles. You need to measure from the center of one eye of the leaf spring to the center of the other to get the proper length. However, since yours are flat, they have stretched quite a bit. So, an accurate measurement will be difficult. More than likely, you will need the 26"-long 6-Leaf Double-Eye Spring for 4,500-lb Trailer Axles, part # SP-256275. I've linked to a video...
    view full answer...
  • Can Heavier Leaf Springs Be Substituted to Offset Weight of Multiple 5th Wheel Slide-Outs
    Your concern with uneven tire wear and suspension sag from the weight of your toy hauler's 4 slide-outs can be addressed by installing stiffer springs on that one side of the trailer. I confirmed with my technical contact at Grand Design that this is permissible and that other owners have done the same. You will want to select springs of the appropriate eye-to-eye length to match your OEM springs and of a weight rating that is not too much higher than the OEM springs. My contact recommended...
    view full answer...
  • Installation of Hanger Brackets and Springs for Tandem Trailer Axles
    It is not uncommon for the trailer hangers on a tandem axle trailer to be all the same size or for there to be different sizes that can be 1-1/2 to 2 inches different in height when you compare the center hanger to the front and rear. For example, the Tandem-Axle Trailer Hanger Kit for Double-Eye Springs - 2-1/2" Front/Rear, 4-1/2" Center # APT8 has that 2 inch difference in size. I've attached an article on suspension to help further as well. You will want to make sure you position...
    view full answer...
    Image 1 for
  • What Causes Trailer Leaf Springs To Break Continuously
    Yes, leaf springs must be replaced in pairs which is why one side left go and then the other shortly after. In regards to the stent you get on a full set of leaf springs, there are really a ton of variables present here so it is hard to predict. However, if you are a full-timer then odds are your trailer is going to be subjected to harder conditions and most likely more weight than the average trailer therefore your suspension components will wear faster. I have attached our leaf spring...
    view full answer...
  • Leaf Springs for 1964 Aristocrat Lo-Liner 13 Single Axle Travel Trailer
    Your Aristocrat's axle may have a sticker or tag indicating its weight capacity, or you can use the Lo-Liner 13's listed dry weight of 1300-lbs as a guide. This dry weight suggests it has a 2K axle which would use 26-inch 4-leaf springs # SP-124275. Your best bet for selecting new leaf springs for your vintage Aristocrat is to remove one completely so you can measure its eye-to-eye length without it being under load. You're right that springs do stretch over time and your spring that...
    view full answer...
  • Locating Replacement Leaf Springs for 2002 Keystone Sprinter 275BHS
    I can absolutely help with determining the right replacement leaf springs for your Keystone Sprinter, however trailer manufacturer's unfortunately don't typically make this kind of information available so I can't track down the specific model you need without some measurements. In order to obtain the right size leaf springs you will need to measure the length of the existing set. With the trailer jacked up (so that there isn't any weight on the leaf spring stack) measure the length...
    view full answer...
  • Recommended 4,400 Pound Leaf Springs and Hanger Kit for Home Built Trailer
    The Universal 6-Leaf Double-Eye Spring # SP-256275 that you referenced is a great option for the 4,400 pound axles you will be putting on your trailer. These measure 26 inches long from the center of the spring eye to the center of the other spring eye. You will just need a quantity of 4 for your tandem axle setup. Then for a kit that includes the needed equalizers, hangers, shackle straps, bolts, and locknuts, you can use the etrailer.com Tandem-Axle Trailer Hanger Kit # APT5. This...
    view full answer...
  • Availability of 4 Leaf Springs that are 26 Inches Long
    We offer a range of leaf springs, both double-eye and slipper types, in several lengths near your 26-inch measurement. I have linked you to our main page for trailer springs. When you click on the product link you will see all 4 leaf springs near 26 inches. You can click on the type you need, double-eye or slipper, and the filters will let you select parts by axle weight rating (if known). Often springs will become elongated after many years of wear so your correct replacements may...
    view full answer...
  • Replacement Leaf Springs for 16 Foot American Hauler Nighthawk
    To replace your trailer leaf springs, the best way to get an accurate measurement is to jack the trailer and measure the springs while the axle(s) are hanging. This is done because over time, the leaf springs can flatten. To get the proper length measurement, measure the center eye to center eye distance, see provided diagram. Assuming your trailer is a single axle, given its GVW of 7000 lbs, you'll need 3500 lb springs. I'll link you to our selection of 3500 lb leaf springs. Increasing...
    view full answer...
    Image 1 for
  • Recommended Leaf Springs for 4,400 lb Axle Based on Axle Position and Hanger Locations
    The typical springs for the AL-KO 4,400 axles are one of two lengths. If you have the 25-1/4 inch length, then you will want the 4-Leaf Double-Eye Spring for 5,000-lb Trailer Axles # SP-218275, but if you have the 26 inch springs, you will want the 6-Leaf Double-Eye Spring for 4,500-lb Trailer Axles # SP-256275. The width will be the same so you will want to determine the length based on the position of the axle using dimension A and D in the attached photos and the axle position based...
    view full answer...
    Image 1 for Image 2 for
  • Replacement Leaf Springs for 3500-lb Trailer Axles on H&H Tilt Trailer
    We carry both double-eye leaf springs and slipper-type leaf springs and the linked page displays the double-eye springs we have for 3500-lb axles. These range in length, measured from eye to eye, from 23-1/8-inches to 27-inches long. For example, part # SP-212275 measures 25-1/8-inches from eye to eye. When you measure your spring you'll want to do so with it removed from the trailer suspension so that you get the most accurate measurement, without any tension on the spring. Also note...
    view full answer...
  • Hanger Spacing Dimensions for Installing E5115 Slipper Springs on Tandem Axle Trailer
    I was able to find more info on your slipper spring. Looks like you have a Dexter 5115 slipper spring that is 27-1/2 inches long and has a 4k capacity. I attached a picture that has all of the hanger spacing dimensions needed when installing this spring with a hanger kit that uses 12 inch equalizers. The hanger kit you most likely have is the part # APT6SE.
    view full answer...
    Image 1 for
  • Measuring Leaf Springs on Trailer to Pick Out Replacements
    To measure leaf springs you want to measure the distance from bolt eye to bolt eye with no load on them. Then when you go to pick out new ones you will go with ones that match the axle capacity and are also roughly 1/4 inch shorter than what you measured since springs tend to stretch over time.
    view full answer...
  • Leaf Spring Recommendation for 4,400 lb Trailer Axle
    The best matching leaf springs we offer for a 4,400 lb axle is going to be the # SP-256275 which is for 4,500 lb axles and has the very common spring length of 26 inches.
    view full answer...
  • Replacing 4-Leaf Double-Eye Leaf Springs with 26 Length for 4,400 Pound Axle
    The only double-eye spring set we have available that matches the length of your existing springs and your axle capacity is the 6-Leaf # SP-256275. This particular double-eye spring features a length of right at 26" from the center of one eye to the other and is designed for 4,500 pound axles. Since this is a 6-leaf stack though you would need to replace the other springs on your boat trailer to match so the height isn't thrown off. If the leaf springs are as old as the trailer it might...
    view full answer...
  • Replacement Leaf Spring for a 1996 Car Trailer that has 26 inch Long Springs
    Dimensionally the leaf spring part # SP-256275 would fit and work well for you. You will also need to be sure that it's 4,500 lb axle capacity is the correct rating for you trailer. I attached an install video for this spring for you to check out as well. If you need a different capacity I attached a link to a page that has all of the other springs we offer that would fit.
    view full answer...
  • How to Measure a Trailer Leaf Spring
    To measure for the correct leaf spring length, you should jack up the trailer so that the axle hangs free, then measure straight across from the center of one eye to the center of the other eye. Because springs tend to flatten out as they wear, this the best way to get an accurate measurement. Each of our product pages for the leaf springs shows a diagram showing the width and height of the spring. If you click the provided links, you can see the double eye leaf springs we offer as...
    view full answer...
  • Replacement Leaf Spring Options for 3,500 Pound Trailer Axles
    To determine the correct replacement spring you will need to go by the measurements of the existing springs. This is best done with the weight off of the spring you are measuring either by removing it or by jacking up one side of the trailer. We have replacements that are rated for 3,500 pound axles. All of the springs on the trailer should be replaced at the same time so that the trailer doesn't have some good springs and some worn out ones. That could lead to poor ride quality and...
    view full answer...
  • Will Shackle Straps Help Improve Trailer Ride
    Yes, using shackle straps will help improve the ride of your trailer, though not as much as getting the properly rated leaf springs, which you are already doing. Shackle straps will help because they are the link between your springs and what I assume is the hanger on a single axle boat trailer, and will allow a bit of movement in the system, helping minimize the rigidity in your trailer's ride. For a single axle trailer, shackle straps are generally 3-1/8" long (measured from center...
    view full answer...
    Image 1 for
  • How to Determine Correct Shackle Strap Length with 2 Different Shackle Straps on Trailer
    Did the previous owner swap out the shackle straps so that one leaf spring has 4" long straps and the other leaf spring has 2-1/2" long straps or are the varying strap lengths on just one leaf spring? If they are both on one leaf spring then you can simply look at the leaf spring on the other side of your trailer to determine the correct length. If the varying lengths are on 2 separate leaf springs then you will simply need to determine which one would allow your leaf spring to sit slightly...
    view full answer...
    Image 1 for
  • Trailer Bottoming Out and Flatten Double Eye Leaf Springs
    The amount of leaves does not necessary indicate capacity so it is possible that the springs you are using are under rated for the trailer. There could also be other suspension components that will need to be replaced. Check for signs of obvious damage such as cracked or broken parts or egg-shaped holes. If you have two 3,800 pound axles and the trailer weighs 8,000 pounds then the trailer is overloaded by 400 pounds and that is likely causing the problem. Going to higher capacity springs...
    view full answer...
  • What are the Proper Components Needed to Install the Leaf springs On a Trailer
    Building a single axle trailer you will need the following items to install leaf springs. I have listed the part numbers for the PR626 Springs next to the items needed. 2 Springs - # SP-256275 2 Front Hangers - # 115917, 1-1/2 inch tall or # 28-5, 3-1/4 inches tall 2 Rear Hangers - # 30-20, with 1-1/2 inch or # 93003-3x, with 3-1/4 inch 4 Shackle Straps - # TRSL313 6 Shackle Bolts and Nuts - # 166081 These components are available in the following Kits. Single Axle Trailer...
    view full answer...
    Image 1 for
  • Troubleshooting Trailer Suspension to Reduce Porpoising
    It sounds like you have done everything possible on the tow vehicle side to reduce the up-and-down porpoising you noted, so I suggest checking out the trailer's suspension. Leaf springs do wear out and lose their weight-carrying capacity and this can lead to more motion from the overall system than with new springs. Also items like shackle straps can wear, their round holes becoming enlarged and/or egg-shaped. If many components in a trailer suspension are worn you can end up with excessive...
    view full answer...
  • Shifting Trailer Axle Back Into Place After Hitting Curb
    If you are certain that nothing else on the axle or suspension was damaged then shifting the axle back is really just a matter of jacking the trailer up, disassembling the U-bolt and plate assembly, and shifting the axle back into place. For this to have happened the axle would have had to have popped off of the spring seat, so it will need to be put back into place. It's also possible that the bolt holding it to the spring seat was broken so you will need to check this. With all this...
    view full answer...
  • Replacement Trailer Leaf Springs for Tandem Axle Travel Trailer
    It is not uncommon for a leaf spring to become elongated after years of use. One spring size we offer, 20-1/4-inches from eye center to eye center, may after years of use indeed measure slightly longer. There is certainly a chance that when new your springs were this size. The link provided will show you the two double-eye leaf springs we offer in this size and both are rated for use with 2000-lb axles, part # SP-169275. These are 3-leaf types but they can be used in your application...
    view full answer...
  • Why Do Trailer Suspension Hangers Have Holes in the Top if they have to be Welded On
    The holes in the top of a trailer suspension hanger, such as # 115917, are there if the installer wants to do a button weld instead of welding around the outside of the hanger. Button welds are difficult to do just right but they would fill up the hole(s) with the welded metal to secure the hanger to the surface.
    view full answer...
  • Recommended U-Bolts for Weekend Warrior LE-3305 Axle Flip Project
    To convert your axle for a top mounted leaf spring I would recommend replacing the U bolts, nuts and tie plates, so your best bet would be to go with a U bolt kit. For a 2-3/8" round axle use # APUBR-1 For a 3" round axle use # APUBR-9 You don't want to actually turn the axle over, because it would have your wheel camber going the wrong way.
    view full answer...
    Image 1 for
  • Can Front and Rear Trailer Suspension Hangers be the Same Height with Off-Level Leaf Springs
    Front and rear suspension hangers are not often the same height like this but they can be. If you have the hanger spacing right then what will happen is the center of the spring will be offset a little between the two hangers to compensate some for the height difference from the hangers/shackle straps. The rear hanger will actually be closer to the front hanger than the rear spring eye so the shackles will be at an angle like in the drawing I have included. If this still does not get...
    view full answer...
    Image 1 for

Do you have a question about this Trailer Leaf Spring Suspension?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality trailer leaf spring suspension for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer leaf spring suspension information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Jeff D
Installed by:
Jeff D
Employee Alexander C
Written by:
Alexander C

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 800-298-1624