Leaf Spring Replacement for 3,600 lb Boat that is 26 inches Long
Published 12/22/2020
Products Featured in This Question
Question:
I have a tandem ez loader boat trailer possibly 1988. From the spindles, bearings, brakes, I assume it has 3500# axles. The springs are 26 inches exactly from bolt center to bolt center. They have a slip U on one end. 1.75 inches wide and 3 leaves. Im assuming these springs are what I should order, but I am concerned that 4300# springs might be too much? Am I going to end up with a very stiff ride? The trailer is about 900#. The boat with fuel and such is going to be around 3600#.
asked by: Jamil Z
Helpful Expert Reply:
The best leaf spring for your application is the item # e27SR which matches the 26 inch length you need and has a 4,500 lb capacity. This would have just enough extra capacity that won't fail but also would still flex enough to cushion the ride quality.
Product Page this Question was Asked From
6-Leaf Double-Eye Spring for 4,500-lb Trailer Axles - 26" Long
- Trailer Leaf Springs
- Double Eye Springs
- 9/16 Inch Eye
- Nylon Bushings
- 4500 lbs
- 1-3/4 Inch Wide
- 6 Leaf
- 26 Inch Long
- Standard Grade
- etrailer
more information >
Continue Researching
- Video: etrailer Rust-Resistant 4-Leaf Slipper Spring for 4,300-lb Trailer Axles Review
- Q&A: Determining If Open Eyed Slipper Leaf Spring Is Needing Replaced
- Q&A: Is Bushing Required on Open Eye End of Slipper Spring
- Q&A: Installation of Slipper Spring with Open Eye End
- Shop: 4-Leaf Slipper Spring w/ Open Eye End for 4,300-lb Trailer Axles - 26-1/4" Long
- Shop: etrailer Rust-Resistant 4-Leaf Slipper Spring for 4,300-lb Trailer Axles - 26-1/4" - Dacromet
- Shop: Spring-Eye Bolt with Locknut for Slipper Springs - 3-1/2" Long
- Shop: CE Smith U-Bolt Kit for Mounting 2" Square Trailer Axles - 4-1/2" Long U-Bolts - Zinc
- Shop: Dexter Double-Eye Leaf Spring - 26" Long - 1,875 lb Capacity
- Shop: 4-Leaf Double-Eye Spring for 4,000-lb Trailer Axles - 26" Long
- Shop: 6-Leaf Double-Eye Spring for 4,500-lb Trailer Axles - 26" Long
- Video: Review of EMCO Trailer Leaf Springs - 4 Leaf Slipper Spring With Open Eye 4300 lbs Axle - EM98AJ
- Video: Nylon Bushing: The Breakdown
- Q&A: Recommended Replacement 26-1/4" Slipper Spring
- Q&A: Replacing Slipper Springs on 1990 EZ Loader Boat Trailer With 3500 Axle
- Q&A: Is It Normal For Open Eye Spring To Hit Frame Of Trailer When Loaded?
- Search Results: 4 leaf slipper spring
- Q&A: Correct Bushing and Bolt for 4-Leaf Slipper Spring # e33SR
- Search Results: trailer hitch
- Article: Trailer Wiring Diagrams
- Video: A Look at the Power Mountain Tallboy 6 Ton Off-Road Bottle Jack with a Military Cargo Trailer
- Shop: Trailer Hitch
- Shop: Trailer Wiring
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: trailer tires and wheels
- Video: Measuring To Choose The Right Trailer Axle
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Shop: Suspension Enhancement
- Search Results: trailer jack
- Search Results: trailer leaf springs
on Trailer Leaf Springs
Jamil Z.
12/22/2020
I have a tandem ez loader boat trailer possibly 1988. From the spindles, bearings, brakes, I assume it has 3500# axles. The springs are 26 inches exactly from bolt center to bolt center. They have a slip U on one end. 1.75 inches wide and 3 leaves. Im assuming these springs are what I should order, but I am concerned that 4300# springs might be too much? Am I going to end up with a very stiff ride? The trailer is about 900#. The boat with fuel and such is going to be around 3600#.