Fulton F2 Swing-Up Jack w/ Pivoting Footplate - 4"-5" Frames, Sidewind, Bolt On - 2,000 lb

See what our Experts say about this Fulton Trailer Jack

• Can Dual Wheels On Fulton F2 Jack Be Replaced With The Swivel Foot Plate?
  I currently only see the foot plate offered with the Fulton F2 Swing-Up Jack # F1413230134 and not offered as a replacement part. We do have the Replacement Wheel # F500138 for the dual wheel style Jack # F1413020134
  view full answer...
• Recommended Fulton Trailer Jacks With Footplate
  We sure do have what you are looking for. We offer 4 Fulton Swing-Up Jacks with pivoting footplates. The difference is either in the mounting preference or the size of the trailer frame. For a weld-on installation, I recommend part # F1413200334. This will fit up to 5 inch frames, has 2,000 lbs static capacity, and features a 7 inch diameter footplate. We also have a bolt-on jack that will work with either 4 or 5 inch frames, and has all the same features. That is part # F1413230134....
  view full answer...
• Mounting Bolt Hole Pattern on Fulton F2 Swing-Up Jack w/ Pivoting Footplate # F1413230134
  The bolt hole pattern, center on center, of the Fulton F2 Swing-Up Jack w/ Pivoting Footplate # F1413230134 is 4-1/2 inches for the shorter ones and 5-1/2 inches for the longer ones. Since the jack can be oriented 2 different ways you will be able to turn it to fit your application. Since your shorter distance is 3-1/2 inches you will need to drill holes to use this jack as this is the closest option that we currently have to the bolt hole pattern that you have.
  view full answer...
  
• Sidewind Swivel Jack Recommendation for a 2014 StarCraft Camper Trailer with 700 lb Tongue Weight
  I think your best option is going to be the Fulton F2 Swing-Up Jack with Footplate, # F1413230134. Like the other Fulton F2 jacks, it does have a higher price point, but it is one of the highest quality jacks on the market. Also, it is the only bolt-on swivel jack with a sidewind crank handle and a foot plate that we offer at this time. This jack was designed to fit 3 inch wide trailer frames, so you will want to use a 1 inch spacer to take up the gap for the u-bolts. The mounting plate...
  view full answer...
• Ground Clearance Using Fulton F2 Swivel Trailer Jack with Pivoting Footplate
  The Fulton F2 trailer jack # F1413230134 can get pretty low. I went out to the warehouse and pulled one of these jacks to measure it. The mounting bracket is adjustable so with it in the lowest position from the bottom of the foot to the bottom of the u-bolt hole using the small u-bolt measures 3-7/8 inches. With the bracket all the way up it is 17 inches. If using the larger u-bolt is measures 3-1/8 inches from bottom of foot to bottom of lower mounting hole. And In the highest position...
  view full answer...
  
• Fulton Replacement F2 Swivel Jack with Footplate Compatibility with 3-1/2 by 4-1/2 Inch Plate
  The Fulton F2 Swing-Up Jack w/ Pivoting Footplate # F1413230134 has bolt hole dimensions that are 5-1/2 by 4-1/2 inches. You would need to remove the swivel plate from each jack and swap them to make both jacks compatible with your desires. This is easily done just removing the swivel bolt nut.
  view full answer...
  
• Replacement Trailer Jack for 2003 Coachmen Clipper Sport 106
  It looks like from the photos I was able to find, the 2003 Coachmen Clipper Sport 106 will take a standard A-frame trailer jack. For that reason you can use something like the Buyers Products A-Frame Jack w/ Support Foot - 15" Travel - 2,000 lbs # 3370091260, which will work with trailers that have a tongue weight of up to 2000-lbs-so it's well rated for your trailer. With that said, if you've got a battery to connect to I recommend an electric A-frame trailer jack like the Stromberg Carlson...
  view full answer...
• Retracted Length of Fulton F2 Swing-Up Jack # F1413230134
  I went out to our warehouse to take a look at the Fulton F2 Swing-Up Jack # F1413230134 referenced in your question. With the jack fully retracted, I measured a distance of right at 25 inches from the bottom of the footplate to the top of the jack. This swivel jack features a a static capacity of 2,000 pounds and a lift height of 10 inches. I have attached a short video demonstration on this jack that you can also check out.
  view full answer...
  
• Recommended Swivel Bolt-On Trailer Jack for Pop Up Camper
  I recommend taking a look at the Fulton F2 Swing-Up Jack # F1413230134 for your pop up trailer. This is a really nice, heavy-duty jack that features a static capacity of 2,000 pounds. It includes an articulating footplate that provides superior stability (even on unlevel ground), a swivel system for easy lifting and transport, and a maintenance-free construction with its lubricated, 1-piece gearbox. It has a lift height of 10 inches and will fit 4 inch and 5 inch trailer frames. The bolt-on...
  view full answer...
• Can Fulton F2 Trailer Jack that Attaches with U-Bolts Attach to Trailer Frame that is 5x2 inches
  The Fulton F2 Swing-Up Jack w/ Pivoting Footplate # F1413230134 that you referenced will fit your trailer frame that measures 5 inches tall and 2 inches wide. Since your frame is a bit narrower what you'll need to do is use a metal spacer between the frame of the trailer and the u-bolts to take up the additional space.
  view full answer...
• Can Wheels Be Easily Removed From Fulton F2 Swing-Up Trailer Jack # F1413040134
  The wheel on the Fulton F2 Swing-Up Trailer Jack # F1413040134 are not really designed for easy removal. In your specific application a better option is the Fulton F2 Swing-Up Jack w/ Pivoting Footplate # F1413230134.
  view full answer...
• What is the Retracted Height of Fulton F2 Marine Trailer Jack F1413230134
  I spoke with my contact at Fulton, and the retracted height of the # F1413230134 jack from bottom of foot to center of mounting plate would be 5-3/8 inches when the bracket is at the lowest setting. When the bracket is slid to the highest setting, the distance would be 18-11/16 inches. The mounting bracket has 13 inches of adjustability, which will give you some flexibility to match the height of the jack to your particular trailer frame.
  view full answer...
• Is There a Fulton F2 Trailer Jack that Has a Foot Plate instead of Wheel Casters
  Yes we have the Fulton F2 jack part # F1413230134 that can fit your frame dimensions and instead of having a wheel setup on the bottom has a swiveling foot plate.
  view full answer...
• Replacement Trailer Jack to Replace 2,000 Pound Fulton Jack
  The Fulton jack we carry that's closest to your current one is The Fulton F2 # F1413230134. It has a static capacity of 2,000 pounds and 10 inches of lift height. It's a bolt-on jack that fits 4 and 5 inch trailer frames. I've linked a review video fo you to take a look at.
  view full answer...
• Recommended Bolt On Side Winding Jack With A Footplate
  The closest option we have is the Fulton F2 Swing-Up Jack w/ Pivoting Footplate - 4"-5" Frames, Sidewind, Bolt On - 2,000 lb # F1413230134 which has a bolt on mount that fits 4" to 5" frames, and has a foot plate like you were wanting. This option has the same 2000lb capacity as the # DL22686 you were looking at without needing to weld anything. I included a video of the # F1413230134 for you to take a look at.
  view full answer...
• Bolt-on Swivel Trailer Jack Recommendation
  It sounds like you only want to use the mounting bracket from the Trailer Valet # STC-V211. But there are swivel jacks that you could use that would not require having to buy two jacks such as # PSEJ10000101 or # F1413230134. I have included a link to the jacks I think would be a better option.
  view full answer...
• 2,000 lb Rated Trailer Jack that Bolts on To Side of Trailer Frame that Swivels and Has Sidewind
  We have the Jack part # F1413230134 which matches your criteria. It's a swivel side-mount trailer jack that bolts on, has a 2k capacity and a sidewind handle. Other option is the Bulldog part # BD154102 which costs a bit less.
  view full answer...
• Can The Wheels On Fulton F2 Dual Wheel Jack Be Replaced With A Footplate?
  Hello Adam, thanks for reaching out. It is possible to replace the broken wheel on your Fulton F2 dual wheel jack with part # F500138, but I am sorry to say there is not a foot plate that will work with this jack. Fulton does make a version of the F2 jack that comes with a footplate, part # F1413230134, but the footplate is not available separately. You will need to either replace the wheels on your current jack or get a whole new jack with a foot plate.
  view full answer...
• Will Bulldog Jack BD150152 Fit 2" Jack Support Mount on Trailer
  I can help you with choosing a side frame mount jack for your trailer. The Bulldog Round Jack Sidewind - 15" Lift - 2,000 lbs part # BD150152 has an outer tube diameter of 2-1/4" so it does not fit the jack mount of your trailer. We currently do not carry a 2" outer tube jack that will fit your application. You may need to remove the existing mount and use Fulton F2 Swing-Up Jack w/ Pivoting Footplate part # F1413230134 which bolts to the trailer frame as long as it's 4" or 5". I have...
  view full answer...
  
• Is the Mounting Pattern on the 1,600 and 2,000 Pound Fulton F2 Swing-Up Jacks the Same
  Yes, the Fulton F2 Swing-Up trailer jack (2,000 pound) # F1413200334 will have the same 3.44 inches by 4.44 inches center to center bolt hole measurements as the Fulton F2 Swing-Up trailer jack (1,600 pound) # F1413130334. I also called our representative at Fulton to confirm. We also have a bolt-on jack that will work with either 4 or 5 inch frames, and has all the same features. That is # F1413230134. I included a short video review and helpful article for you too.
  view full answer...
• Swivel Jack with Footplate for Trailer Frame that Measures 4-Inches Wide
  The Fulton F2 trailer swivel jack # F1413230134 that you referenced is an excellent choice for your trailer frame that measures 3-inches wide and 4-inches tall. This jack features a pivoting foot plate with ball-and-socket connection for sure footing on uneven surfaces and it includes all required u-bolts and mounting hardware. A product review video is linked for reference.
  view full answer...
• Heavy-Duty Trailer Jack Recommendation
  Typically the tongue weight and the height needed to clear the towing vehicle coupler are the considering factors for choosing an appropriate trailer jack. It is recommended to choose the jack has a higher capacity than the tongue weight of your trailer. The jack should provide enough lift to clear the vehicle coupler when in a level position by 4 inches. If your gross trailer weight is 4,700 pounds then the tongue weight of that would be estimated at approximately 10 to 15 percent which...
  view full answer...
  
• How To Bolt-On Bulldog Round, Bolt-Thru 2K Swivel Jack
  The Bulldog Round, Bolt-Thru Swivel Jack part # BD154102 can be bolted to a trailer frame when using the Replacement Bolt-On Mounting Kit part # F500349 and Replacement Mounting Hardware part # F500286. There's also an option of the Fulton F2 Swing-Up Jack part # F1413230134 which doesn't have as many parts.
  view full answer...
• Swivel Jack with Wheel for a Boat Trailer with Swing-Away Tongue
  To pick out the best jack for your application you will definitely want to find out what the Tongue Weight (TW) of your trailer is when your boat is loaded on it. You can find this using a tongue weight scale like # e99044 or the method of using a bathroom scale which you can check out in the attached article on TW. We do have a Swing-Up option for a jack that has a wheel. The Fulton F2 # F1413040134 uses a bolt-on installation like your current jack and has a TW rating of 1,600 lbs. To...
  view full answer...
  

Do you have a question about this Trailer Jack?