View Cart
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"

Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"

Item # 76112

lowest price pledge

Retail:$258.90

Our Price: $169.60

You Save: $89.30
Trailer Hitch

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

This item qualifies for Free Shipping

Shipping Weight: 42 lbs

Quantity: 
In Stock, Ships Today
76112 - Concealed Cross Tube Draw-Tite Custom Fit Hitch
zoom in icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
Please enter a valid email address.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

pop out icon replay 360 icon
horizontal rotate icon

Product Images

In Use/Installed

Customer Photos


  • Draw-Tite
  • Class III
  • 2 Inch Hitch
  • 3500 lbs GTW
  • 525 lbs TW
  • Custom Fit Hitch
  • Concealed Cross Tube
  • 3500 lbs WD GTW
  • 525 lbs WD TW
Fully welded vehicle trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection. Lowest Prices for the best trailer hitch from Draw-Tite. Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" part number 76112 can be ordered online at etrailer.com or call 800-298-8924 for expert service.


  • All Info
  • Reviews (184)
  • Q & A (65)
  • Videos (9)
  • Photos
  • Why etrailer?

Draw-Tite Trailer Hitch - 76112

Fully welded vehicle trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection.


Features:

  • Custom-fit trailer hitch lets you tow a trailer or carry a bike rack or cargo carrier with your vehicle
  • Computer-aided, fully welded steel construction ensures strength and durability
  • Tested Tough - safety and reliability criteria exceed industry standards
  • Easy, bolt-on installation - no welding required
    • Complete hardware kit and installation instructions included
  • Lifetime technical support from the experts at etrailer.com
  • Black powder coat finish covers e-coat base for superior rust protection
  • Integrated mounting point lets you attach a bracket for a 4-way or 7-way plug (sold separately)
  • Sturdy, square-tube design
  • Ball mount, pin and clip sold separately


Specs:

  • Receiver opening: 2" x 2"
  • Rating: Class III
    • Maximum gross trailer weight: 3,500 lbs
      • Maximum GTW when used with weight distribution: 3,500 lbs
    • Maximum tongue weight: 525 lbs
      • Maximum TW when used with weight distribution: 525 lbs
  • Limited lifetime warranty


Draw-Tite Tested Tough

Draw-Tite Tested Tough

Draw-Tite's Tested Tough program provides testing standards far superior to those outlined by the Society of Automotive Engineers (SAE), the go-to source for engineering professionals.



Each Draw-Tite trailer hitch receiver undergoes extensive fatigue testing and static testing with the ball mount that is either supplied or recommended for use with that particular hitch, thus ensuring results that are applicable to real life use. Fatigue testing is also conducted on hitches rated for use with weight-distribution systems.


In addition, Draw-Tite performs static testing on a simulated automobile, as opposed to the rigid fixture used for SAE testing, resulting in a more true-to-life scenario.


etrailer.com Technical Support

At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.



76112 Draw-Tite Class 3 Trailer Hitch Receiver - Max-Frame



76112 Installation InstructionsInstallation Details 76112 Installation instructions

This Product Fits The Following Vehicles

2011 - 2020 Toyota Sienna



California residents: click here


Video of Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"


Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Trailer Hitch Installation - 2018 Toyota Sienna - Draw-Tite

Speaker 1: Today on this 2018 Toyota Sienna, we'll be having a look at, and showing you how to install the Draw Tite Class III trailer hitch receiver. Part number 76112. Here's what our hitch looks like installed. First thing you'll notice about this hitch, that sets this apart from other hitches out there, is that it's completely hidden behind our fascia here. The only part you'll see hanging down is the actual receiver itself. Some of our customers have even pointed out, because this hitch sits up higher than most, they have found it easier to pull into steel driveways without worrying about having to scrap the bottom of the hitch.On the side of our receiver, you'll find two holes.

The larger diameter one, closest to the front of the vehicle, that's your industry standard 5/8 inch diameter hitch pin hole to secure your hitch mounted accessories. You can pick up a pin and clip on our website, as part number PC3. This smaller hole closest to the rear, that's for our J-pin stabilization devise. And what that does, is take away the annoying shake, play, and rattle out of what's inserted in your receiver.We have one those available for you on our website as well, too. Welded on the bottom, area our rolled steel safety chain loops.

Now what's great about these safety chain loops, is that they're large enough to accept even a very large hook like this one without a problem. You can still easily clip it on, and clip it off. This hitch features a 525 pound max tongue weight rating, which is the amount of forcing down. And a 3,500 pound max gross trailer weight rating, which is the amount it can pull. It does support the use of distribution.

However, those numbers don't change.Now for a few measurements to better assist you in choosing any hitch mounted accessory you may need, such as a ball mount, a bike rack, or a cargo carrier. You're looking at about 12-1/2 inches from the ground to the top of the two inch receiver opening. And about four inches from the center of the hitch pin hole to the rear most part of the back bumper. Now that we've gone over some features, we'll show you how to get it installed.To begin our install, underneath our vehicle, we'll find an underbody panel that we need to remove. In order to remove this, we'll have five, 10 millimeter screws that run across the back that we need to remove first.

Then we'll have seven plastic push pin fasteners like these to remove. The way these work, just get it under the white section, with a flat head screwdriver, and pop it down, and then pull out the bigger black section. On the driver side, where it meets our mudflap, we'll have a single Phillips screw to remove. Then we'll have four plastic push pin fasteners, like this. The way these work, is you can stick a flat head screwdriver in there, twist it, and pull down on the panel, and it will release.Once we have all of our fasteners removed, we can simply grab the panel, and pull it away from the vehicle. Now here's a tech tip for you, normally this hitch requires the fascia to be removed. We found you don't need to do that in order to install it. These tabs here, we can simply pull these down, and fold them out of the way for the time being, to get room to install the hitch. You can also use a pair of pliers to make it a little bit easier for you.Now we need to lower our exhaust to get room to get the hitch in place. This exhaust hanger here, we'll just spray it with a little lubricant so it'll slide off easier. We have lubricant available on our website if you need some. Now we'll use a pry bar to pry it off the hangar. Now on each one of our frame rails, we'll have several pieces of tape covering up our weld nuts and a rubber plug that's in the middle. We need to remove all of these items. You can just scrap them off with a screwdriver.Okay, now, this is the hardware we're going to use to secure our hitch in place while the bolt, lock washer, and a flat washer. It's the same for every one of our attachment points. We're looking at the driver side right now. Passenger side's the same way. We'll have two weld nuts close together on the back, and then one closer to the front. Since these weld nuts we're covered up with tape, we shouldn't have to worry about cleaning out the threads at all. But we'll just verify by running our bolt in it by hand first, to make sure it goes in easily.Now if your bolt doesn't go in easily, we do have wire brushes available on our website. That's part number 814092. Just spray a little lubricant inside, and run the wire brush in and out to help clean up the threads. Now, with an extra set of hands, we'll raise our hitch in position, over our exhaust. And we'll pull back on our fascia, and lift it up. And we'll secure it with our hardware.Once we have one bolt started on each side, the hitch'll support itself. With all of our hardware now started, we use a 19 millimeter socket to tighten it down. Now we'll use the torque wrench and torque all of our hardware to the amount specified in the instructions. Alright, now we can push our exhaust back up, and reinstall the hangar. Now we'll bend our tabs back up.Alright, on our underbody panel, we marked out an area we need to cut out, so we have clearance around our hitch. The reason we're doing this, is so we can safely reinstall our underbody panel. That way, we can maintain the most aerodynamic qualities underneath the vehicle, which may help improve fuel economy. You can use a sharp utility knife to cut this, or rotatory tool. That's what I'm going to use.Alright, now we can reinstall our trimmed, underbody panel. And that completes our look at, and showing you how to install the Draw Tite Class III trailer hitch receiver, part number 76112, on this 2018 Toyota Sienna.


Customer Reviews

Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" - 76112

Average Customer Rating:  4.8 out of 5 stars   (184 Customer Reviews)

Fully welded vehicle trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection.

- 76112
by:
Roadmaster

Install was easy. Finish is great. Fits like a glove. BUT when I used it with a Roadmaster Quiet Hitch to help stabilize a 2" Hitch Adapter that had my bike rack attached to it - a chunk of the paint came off. Rusted and purely cosmetic but I was surprised how the paint just came off. 571023



- 76112
by:

Couldn't be any happier with the whole process, research, ordering and the delivery. Although my parts were not yet installed, they are waiting for me at home so when I get back from my winter vacation, I can entertain myself installing them. All the videos are absolute a great help and informative. Great place to do business with, one would hope there are more businesses like this. Congratulations guys!! 374096


Comments

Priceless. Best product for that use.

Jose K - 04/29/2018

37850

- 76112
by:

It’s Christmas, and I got just what I wanted! The box is in good shape and the hitch stays in it until after tomorrow’s big storm. Thanks 464585


Comments

I have not used it to pull a trailer, but then that is not why I got it. We have used it a few times to haul our bikes around, and it works well. I doubt there is a way to do it, but I wish rack could be just a little higher. The Sienna is just a low-slung car, though.

Gil B - 01/03/2019

48186

- 76112
by:
2016 Toyota Sienna

DrawTite 76112 is one which looks and works great! I purchased this because the only thing that is visible is the hitch and not the frame and it is a class III one, which means more tongue weight. I went on a 2.5 hour camping trip with 3 bikes with one of it having a baby carrier. It was pretty stable and did not have any issue at all. The bike rack was one of the swing type heaviest ones too. The total weight must have been around 130-150 pounds. No problems at all. I got this installed at a hitch shop simply because I did not have the time to spend on it and did not have a torque wrench but it looked easy though from the videos Shipping from etrailer was very fast. 423314


Comments

Product working just fine after an year. nicely hidden and the best ground clearance you can get on a Sienna.

Subhankar B - 08/21/2018

42595

- 76112
by:
2017 Toyota Sienna

Definitely prefer the Draw-Tite 76112 vs. the Curt C13105...at least so far for the following reasons: 1) 76112 is a lot cleaner look (just the receiver shows) and 2) doesn't hit when going down my driveway! Speaking from experience, I installed the Curt on my wife's 2011 Sienna when I purchased the van brand new in 2011. Bought a 2017 a couple of months ago (had to replace her 2011 due to an inattentive driver turning left in front of her; wife had the right of way). I needed a tow hitch for bikes and watercraft. I was dreading getting the Curt again and saw the Draw-Tite. Install difficulty (not bad at all) was probably about the same on both and followed the video. Didn't have to remove the bumper cover. I did the install solo using ramps, jackstands, and a floor jack. I also bought the Tenkosha and followed the video with routing outside the vehicle. I'm anal and ended up using a wire wrap loom to protect the wire from abrasion, heat, damage, etc. Let's see how it holds up. Last but not least...etrailer.com is the place to go for all your towing needs! 511219



- 76112
by:
2018 Toyota Sienna

instructions were quite a bit more complicated then they needed to be. I did not need to remove the bumper, I did not need to remove the exhaust. The hardest part was holding the hitch in place while I got the first bolt threaded. The bolts don't thread unless they are lined up perfectly. I used a few short pieces of 2x4 to help prop the hitch up during install. I didn't jack the car up which I think actually made the install easier because I didn't have to lift the hitch as far up. I also used the hitch box as a surface to crawl around on. All in all it was pretty straight forward and easy. I'll be doing the wiring in a couple days which looks less intimidating after watching the video on etrailers site. 574004



- 76112
by:
2015 Toyota Sienna

I love how this hitch turned out. Installation was a breeze. I had it on all by myself in 30 min with just the basic hand tools. The installation instructions tell you to lower the tail pipe, but I didn't have to. The tail pipe actually helped hold the hitch up on one side while I started the bolts on the other. The Hitch itself is made of quality materials, is heavy duty and well built. I would definitely recommend this hitch to anyone. I particularly like how just the receiver is visible beneath the van and the cross bar is completely hidden. 562430



- 76112
by:

Appreciated the helpful video explaining the different options for my van. Product was easier to install than I expected (did not have to loosen the exhaust), fit perfectly, and looks great! 412572



- 76112
by:
2018 Toyota Sienna

Relatively easy install thanks to your excellently produced YouTube video for this make and model of hitch and vehicle. I’m amazed you had a video for my exact project. I’m not very handy but got it done in 2 hours with the help of my 14 year old. On our backs in the garage. Thank you for excellent fast shipping and the videos. My hitch arrived one day before the guaranteed day. 567229



- 76112
by:
2017 Toyota Sienna

Product was delivered with damaged packaging (the hitch was sticking out of the box). Fortunately, the product is intact. The steel is so thick that it probably takes a bulldozer to damage it. I am not taking any star off for this but may be etrailer can improve their packaging if others are having the same problem also. It took me about 30 minutes to install on a 2017 Sienna SE. I did not have any helper so I just balance one side on my knee when screwing in the other side. No problem at all. I definitely would recommend this to other Toyota Sienna owner. 395484



- 76112
by:
2016 Toyota Sienna

I did it myself in 90 minutes on a 2016 Toyota Sienna. Here are some hints. 1) Get some plastic body panel removal tools, they will help you get the plastic pins off without breaking them. Pry off the large white part of the pin first. 2) I did not have to remove the rear bumper cover! Instead, I loosely put a bolt into one side of the hitch while letting the other side sit on the floor. Then I lifted the bumper gently over one bumper tab at a time. I used a milk crate to hold up the hitch while doing this. 3) There are two tabs sticking out of the fuel tank and in the way. Just bend them down during installation and bend back after. The video has this but the printed instructions do not. 4) Definitely spray some lube on the rubber isolator, it'll come of so easy with lube. 5) I marked the center of the plastic under cover before removing, just as instructions asked. After removing I cut a 6 inch straight line on the center line. After installing the hitch and reinstalling the cover, I then cut out the rest so that it would be a nice night fit around the hitch receiver. Tools I used: power screwdriver, body panel removal tool, socket set (deep or with extensions), very large screwdriver. ratchet with long handle, torque wrench or breaker bar or ratchet with very long handle, some lube for rubber isolator, razor. 545716



- 76112
by:
2017 Toyota Sienna

Very easy to install since no drilling. Video is very helpful. It took me about 40 minutes to install the hitch. Hitch looks clean and hidden on my 2017 Toyota Sienna XLE. 470770


Comments

Its been a year, the installed hitch still work great, no issue, and still new. The AirLift 1000 AL60732 was also installed right after hitch installation. Theyre right combination. I use the hitch at least once a week to carry bike rack and towing small trailer box. I had several Sienna owners came up to compliment and asked info where I got the hitch. I told them I got it from etrailer.com and installation is easy.

SN92703 - 01/28/2019

48973
Comments

Its been a year, the installed hitch still work great, no issue, and still new. The AirLift 1000 AL60732 was also installed right after hitch installation. Theyre right combination. I use the hitch at least once a week to carry bike rack and towing small trailer box. I had several Sienna owners came up to compliment and asked info where I got the hitch. I told them I got it from etrailer.com and installation is easy.

SN92703 - 01/28/2019

48974

- 76112
by:
2015 Toyota Sienna

Perfect fit! This hitch is hidden with little ground clearance interference. I had a second person help with holding the hitch. We did not remove the exhaust for access to the bolts on the passenger side. 378720



- 76112
by:
2016 Toyota Sienna

Installed on a 2016 AWD Sienna. The hitch looks good and nicely fits up out of the way unlike many other hitches. No loss of ground clearance and nothing sticking out of the back of the vehicle to bang my shins on. The only gripe I have is that the hitch itself came a little pigeon toed. When I was installing it, the hitch fairly tightly gripped what I think is the underneath of the trunk. This actually helped me get it up in there by myself since it gripped tight enough to hold itself up. The problem was that 1 of the 3 mounting holes on one side (driver side, hole closest to the front of the car) ended up slightly misaligned and I couldn't get the bolt in. I ended up threading the other 5 bolts to just a shy of "hand tight" and gave the receiver opening a couple gentle kicks to take up the slack provided by the bolts not being tight. Then I had to use a pry bar to push the hitch away from the trunk bottom so I could get the last bolt in. I had to use the bottom of the trunk for leverage and I thought I was going to push in a dent, but everything held and it ended up being fine. I tried a bunch of stuff to not have to do that and the whole thing was pretty nerve wracking at the time thinking I was going to cave in the trunk. Took off a star for that hassle and other than that fiasco it probably would have only taken an hour and 15 minutes to get the whole thing done. With the misalignment issue I ended up spending a little over 2 hours. Everything else was just like the etrailer installation video except my muffler was mounted slightly differently and I had 3 rubber isolators that needed to be detached. Something to watch out for: the installation video shows the installer bending down 2 of the underbody mounting tabs. I bent one of mine slightly too far and the bracket started to break away from the weld, so be careful (bent the 2nd one more delicately and it was fine). Overall I'm happy with the hitch and would buy it again since the finished product of a mostly hidden hitch is worth the install issues. 452067



- 76112
by:
2010 Toyota Sienna

Not sure why etrailer rates the install of this hitch as 9 out of 10. Other hitches require removal of the "appearance panel" and require even more trimming of that panel versus what you need to trim for this hitch. So much so that outright permanent removal could be considered. Following etrailer's lead, slightly bend back the two tabs that hold that panel, as shown in install video, and lift this Draw-Tite into place, torque the bolts, bend back the tabs to their rightful place.... done!! I chose this hitch because the bracing is completely hidden and looks the best on the Toyota Sienna. Sorry I have no pictures, I needed to keep moving along with both hitch install and wiring as I didn't want to be without a vehicle for too long. etrailers's shipping speed was crazy fast, had entire order (hitch, wiring harness, accessories) in TWO days!! Can't beat the prices either ;-) 489081



- 76112
by:
2016 Toyota Sienna

I had been reluctant to try an install on my own but the etrailer videos were fantastic and with a little help from a friend, this was a relatively easy install on my 2016 Sienna. Start to finish was probably 1.5 hrs. Like others, I was a little bummed to have to deal with a paint chip right out of the box (see photo) but after a quick prime and paint with a rust inhibitor, it was good to go. A couple of tools really helped speed things up--plastic fastener removal tool and exhaust hanger removal pliers. Short money and worth it. The rubber isolator is a pain to deal with (on and off) but the exhaust hanger removal pliers (along with WD 40) are the way to go. The hitch looks great and will get a work out on an upcoming 220 mile trip. I can't say enough about the etrailer videos--everything worked pretty much exactly as detailed in those videos. Lastly, I had to cut the plastic appearance panel a little deeper than the 5" noted in the instructions. I probably went 6 or 6.5" deep and 3.5" wide. It was pretty obvious when I tried to reinstall the panel how much deeper I had to cut. 547867



- 76112
by:
2015 Toyota Sienna

Love it...Love it... Thank you etrailer.. i love this product.. because of the way you provided the information and (the best part) the videos of it on how to, made my life so much easier knowing how it will look on my car and install it. Picture may have 1000 words but videos makes you pseudo experience it. 426082


Comments

love it this hitch to these day...i love that it hide comfortably behind the back bumper make it un-noticeable. Will continue to be customer of Etrailer in the future.

PC L - 08/29/2018

42974

- 76112
by:
2015 Toyota Sienna

First I would like to say that shipping is unbelievably fast . Product is an excellent quality installed in no time fits perfectly .if you own Toyota sienna this is the one you want to have it is hidden underneath the bumper. 561521



- 76112
by:
2013 Toyota Sienna

When I started looking for hitches, one of the big things I wanted was to not see it. This hitch is up tight and is not seen. I put it on in 20 minutes with help from my 9 year old son. No need to remove the muffler, long extension works fine. No local parts store even came close to price. I ordered on Saturday and it arrived Wednesday. 2013 Toyota Sienna 510449



- 76112
by:
2011 Toyota Sienna

Vehicle: 2011 Toyota Sienna LE v-6. The video instructions were perfect. I watched the video twice and referenced it when I needed help. You will need two people to lift the hitch into place to get some bolts in on each side but only for about 5-10 minutes. The prep before and work after just takes one person. Finished in 1hour and 45 minutes taking my time and being patient. I have not placed my bike hitch rack on it yet but so far seems very sturdy and is nicely covered by my existing undercarriage cover. 435828


Comments

After one year, weve had a bicycle rack on it carrying 3-4 bicycles around a few times per month. Hitch works well and is holding up strong. Very happy with our purchase and would definitely buy again for our next vehicle.

Family B - 09/23/2018

43911

- 76112
by:
Ford Edge

Well built hitch, though arrived with the paint scratched off in several spots - a quick repaint and no worries. Mounting went without a hitch (sorry) - the hitch's 6 mounting holes lined up precisely with the frame weldnuts. I didn't remove the bumper cover so I had to yank a little bit on the bottom edge of the cover to get the hitch up into it's cavity. Two metal tabs used by the underpan cover have to be temporarily bent down for the hitch to clear and then bent upwards to their original orientation. Mounting took a little over an hour with a friend to help support the weight of the hitch (it's heavy). The hitch tucks nicely into the space provided by Toyota though the tailpipe wound up pressed against the side of the passenger-side hitch support plate - this is apparently a common issue so I plan to adjust the tailpipe hanger to resolve it when I get a chance. 545729



- 76112
by:
2015 Toyota Sienna

Este producto quedo excelente para mi sienna 2015 así como quería y fácil de instalar en 20 o 30 minutos todo listo perfecto translation: This product was excellent for my sienna 2015 as well as wanted and easy to install in 20 or 30 minutes everything ready perfect 482083



- 76112
by:
2018 Toyota Sienna

I'll have to admit that I was a bit nervous about installing this on our new Sienna. I ordered it and the package arrived very quickly. It was heavy was my first thought. Although I will never be pulling a very heavy trailer with the van it was nice to see that the construction was sturdy. I went ahead and drop the plastic shield from underneath the rear of the van and proceeded with my installation. The installation went very smooth I was able to get one bolt in one side and then I proceeded to get one bolt into the other side and snuggle them up. I did have to unhook the exhaust bracket but it was not a big deal. The rest of the bolts went in Fairly easily and then I proceeded with putting my plastic Shield back into place. You do have to cut the plastic shield in order to fit around the receiver hitch but it was extremely easy to do. Overall I get five stars to everything the shipping, the product, and the ease of installation 512598



- 76112
by:
2015 Toyota Sienna

Delivery came in 3 days after ordering from eTrailer. Installation on a 2015 Toyota Sienna took 2 hours. The eTrailer installation video was a huge help. It was probably a little trickier than normal for me because I didn't have the vehicle raised on anything, so clearance underneath was a bit tight. The hardest parts were 1. prying the exhaust isolator free, and 2. lifting the hitch up under the vehicle and getting the initial bolts hand-tightened (my wife helped with this to hold the hitch in place while I hand tightened the bolts). The hitch looks great once installed - with only the hitch receiver visible below the bumper. I'll use the hitch just for a bike rack, no towing, so did not have to do any installation for electrical connections. Very happy with this product, and the service + delivery from eTrailer! 394573



- 76112
by:

It went in without a hitch. No but seriously, the hitch fit perfect. The video took all the guess work out of he install. Great product and services offered by a great store. Thank you etrailer 378038


Comments

The receiver is still in perfect condition. The hardware still looks great and I’ve pulled pretty close to the 3500lb limit. Now to install some airbags.

Meric V - 05/08/2018

38327

Thanks for the follow up Meric. I have included a link to our fit guide that lists the air bag, as well as other suspension options for your 2011 Toyota Sienna.

-- Rachael H - 5/9/2018


- 76112
by:
2011 Toyota Sienna

I would definitely recommend etrailer.com to everybody. Very smooth transaction. There was a little quality issue with the first shipment, but they quickly shipped me a replacement unit and the return process was impressively simple and painless. Thanks again to Shery T. for her above and beyond customer service. I had technical difficulty sending email to state my complaints of the subquality item and i didn't know all they get is a blank email from me. And waited few days in frustration and no responds, i sent email again. This time Shery T. replied and asked if i needed help because all she got was just a blank email. I really appreciate her reaching out and took care if the problem. The hitch reciver turn out to be a perfect fit and looks really good. I am very happy with it. I don't normally write review after purchase, this is one of the few that i would take the time to share my experiences with everybody. Thank you. 432919



- 76112
by:
2017 Toyota Sienna

This is a perfect fit on a 2017 Toyota Sienna XLE AWD mini-van. I have never installed one of these before. The installation took me about 2-hours to complete. This would have been significantly easier (and faster) to install if I had someone to help me, but I did not. Doing the install myself, I drove the rear of the vehicle up onto ramps so that I had extra room to work. I used 4 jack-stands to help get the hitch assembly raised up into position. The hitch assembly is very heavy, so it is almost impossible to get it positioned correctly and bolted to the vehicle without two people or without 4 jack-stands or wood-blocks or something like that. This hitch model is far superior to the other options for this vehicle because this one fits up and behind the bumper, which makes nothing but the hitch receiver visible and also it does not adversely impact ground clearance. The other hitch options for this vehicle leave the entire hitch assembly exposed below the vehicle which not only looks bad, but it also lowers your ground clearance significantly. Note that there are two metal tabs with screws on them that must be bent down temporarily to get the hitch assembly up into the bumper area. They can be bent back into place once the hitch has been bolted on. I have attached a picture of these metal tabs. I did *not* have to remove the bumper to complete the installation. I chose to reinstall the plastic panel on the bottom of the vehicle after I installed the hitch. The plastic panel cuts easily and mounts back up just fine. You will need a torque wrench, 19mm socket, and some extensions to bolt the hitch on. Torque spec is [spec]. Removing the rear exhaust from the rubber hanger is a must. It comes off easily if you spray some WD40 into the rubber exhaust hanger, and this also helps when you try to slip it back on later. 338429


Comments

The hitch has worked great! No issues or complaints after a year of usingit with our 2018 Sienna.

Jonathan R - 02/06/2018

34341

- 76112
by:
2015 Toyota Sienna

I chose this hitch because of it's hidden profile which it does well (2015 Sienna). It was simple enough to install as most hitches are. Most will need some sort of mild prying or adjustment during installation! On this hitch you only need to cut a small area out of the lower shield where the receiver is (simple). For the muffler, shove it over by hand and block it over using a wooden block (2X4 etc.) this will allow you to access the bolts. The bolts are not nickel plated so it is wise to add corrosion to them. The hitch itself is well made and has a durable coating, it was shipped in a box and arrived without damage of any type. Very happy with my purchase! 455953



- 76112
by:
2012 Toyota Sienna

Installation went well on 2012 Toyota Sienna and very similar to your nice installation video. As I had to install it myself, I put the back end of the van up on ramps and used 16" tall cement foundation blocks to hold the hitch near position so that it was easy to position each side after that. I narrowed the plastic cutout in the bottom shield to 3.25" wide vs. 4" (on the video) for a cleaner look. All was well until I viewed the finish product from the rear end and noticed the 2" x 2" hitch channel was welded on crooked at the factory, so the Draw-Tite folks definitely need to inspect their weld fixtures to lock in alignment better. The angled hitch will definitely have an amplified look if I ever mount a flat hitch rack to it. 401815



- 76112
by:
2015 Subaru Outback Wagon

Hitch arrived quick and well packed, but it still had few paint chips on, which was a bit of a let down. Installation was easier than my other hitch instalations on a Subaru Outback. What took the longest was to actually take the underbody cover off since there is plenty of fastners holding it in place. I have a 2015 Sienna SE and I did NOT have to bent the two metal tabs that install video talks about. I simply had my wife gently pull the bumper cover away from the car (really, just an inch or so, it's very flexible) and I was easily able to slide the hitch in place. Then, just installed the bolts. Trimmed the underbody panel per the instructions and I was done. 543792



- 76112
by:
2013 Toyota Sienna

Everything Works Perfectly, Fast Shipping, Nice Deal. 362127



- 76112
by:
2019 Toyota Sienna

Installation of the hitch, wiring,rear bike rack, and new roof rack towers went well. I didn't set any speed records, but I was more concerned with doing no damage on a new 2019 Toyota Sienna AWD van. The hitch fit up well per instructions except that I was able to work around the exhaust without lowering it. Underbody panel and rear fascia did both need to be removed. Very happy with the end result. The new van is now set up to haul the bikes and canoes and move my log splitter. 668944



- 76112
by:

Easy to install but 2 problems. On the 2018 Sienna, the vehicle for some reason has very low ground clearance to begin with and hitch scrapes on a lot of inclined driveways. 2nd problem is that the tailpipe is so close to the hitch that everytime I make a right turn, the tail pipe rattles against the hitch. Super annoying. Fixed by putting a foam pad in between. otherwise awesome hitch. 664978



- 76112
by:

Pros: Align perfectly with frame hole, easy install, look like factory. Cons. Exhaust tail pipe hits against the hitch and a cause a loud rattle. I had to wrap the tail pipe to dampen the sound but The sound still makes its way into the cabin. 664504


Comments

The exhaust system at the rear of the car is attached to the vehicle using rubber isolators and easily bendable exhaust hangers. Because of this, the actual position of the exhaust system can vary from vehicle to vehicle. When the hitch is installed, its position is fixed and will not vary from vehicle to vehicle. The large tolerances in the exhaust system is what can allow the rattle to occur. In other words, its not the fault of the hitch or its design. Youll just need to create a bit more space between the hitch and the exhaust. This is a common occurrence that is easily remedied by slightly bending the exhaust hanger. Ill linked you to a help article that addresses how to easily fix the rattle.

-- Mike L - 07/02/2019

57378

- 76112
by:

Love the fact that this sturdy trailer hitch is completely hidden except the receiver. Fits like a glove except a bit too close to the exaust system, will knock together and rattle at times. But being the licence mechanic that I am, a dab of Ultra Grey silicone did the trick!! Great value for the money! 663109



- 76112
by:

Great product. Right fit. 662642



- 76112
by:

Worked great for me! 662166



- 76112
by:

Easy to install, perfect fit and very rugged looks great it’s completely hidden except for the square receiver 661064



- 76112
by:

Super easy to install. Took about 45 to complete the job 658858



- 76112
by:

Installed in a pretty short amount of time and quite easy. I do not claim to be a mechanic either. I like it because it is tucked up under the bumper and concealed. It really looks like it is from factory. 656881



- 76112
by:

Used this product on a trip from Kentucky to California last summer. It worked very well. 656170



- 76112
by:
Toyota Sienna

This is the best hitch for our Sienna. The receiver is higher than usual which means you're less likely to scratch it on the road getting into drive ways and such. Installation wasn't difficult but took time, especially if you want to wire it up. 655191



- 76112
by:
Toyota Sienna

This is exactly what we wanted for our Sienna SE. It fits perfectly under the trim and the only exposed part is the receiver box. 654124



- 76112
by:

Great product - easy bolt-up with no tweaks, filing, grinding (you know what I mean!) necessary whatsoever. Exact fit to the factory threaded holes - presumably welded-in nuts, inside the frame. Note: this was a new vehicle, so the threads in the frame were nice and clean, w/ no rust. If you buy a new vehicle, and ever want to mount a trailer hitch, buy it immediately (from etrailer, of course!) and install it. On our previous vehicle, the hardest part of the job was clearing the rust out of the threads on years-old vehicle. Oh, another plus - etrailer's installation videos are great. 653903



- 76112
by:
Toyota Sienna

I have had this hitch mounted on a Sienna for a year now. The installation was simple enough to do by myself and matched perfectly to the mounting points under the vehicle. The only issue I can report is that it touched the tail pipe, which caused a rattling noise when the vehicle was running. So I bent the tail pipe a little, problem solved. This hitch looks great because the cross bars sit high enough that they are not visible, which is the reason I settled on this particular one. Great product. Definitely recommend it. 653233



- 76112
by:

A year later and the hitch is still like new. No rust and performs really well. I am soooo glad I went with the drawtite hidden design. It's just so much out of the way compared to standard hitches. 652130



- 76112
by:

Installation worked perfectly. All aligned well and the video helped immensely to cover a few details. Only issue is paint and after one year several rust spots are appearing despite normally having the vehicle in the garage. All in all, it was a very good product. 650178



- 76112
by:

My 3rd hutch from etrailer, and as usual fast delivery, easy installation with help of videos, and overall great product. HOWEVER, on this hitch there is literally 1/4” clearance between hitch side frame and tailpipe, leading to an annoying rattle/vibration every time I start the car and accelerate from a stop. Everything was installed perfectly as there’s really no option, the exhaust goes right back where it was. It would be nice to know if anyone else has had this issue, the car is only a year old. Have reached out to tech support, but no response which is disappointing. If they actually get back to me with a fix I will certainly upgrade my rating. 642723


Comments

The exhaust system at the rear of the car is attached to the vehicle using rubber isolators and easily bendable exhaust hangers. Because of this, the actual position of the exhaust system can vary a bit from vehicle to vehicle. When the hitch is installed, its position will not vary from vehicle to vehicle. The large tolerances in the exhaust system is what can allow the rattle to occur. In other words, its not the fault of the hitch or its design. Youll just need to create a bit more space between the hitch and the exhaust. The good news is that his is a common occurrence that is easily remedied by slightly bending the exhaust hanger. Ive linked you to a help article that addresses how to easily fix the rattle.

-- Mike L - 05/18/2019

55407

- 76112
by:
2016 Toyota Sienna

Product fits great and looks good installed. Install was kind of tricky with limited access under Toyota Sienna but with a u-joint socket you don’t have to remove the exhaust/muffler. The install was a little tricky due only to my vehicle, the product itself is great! 637566



- 76112
by:
2015 Toyota Sienna

Just bought 2015 Toyota Sienna LE and purchased hitch and wiring from etrailer.com It came in on time and installed them both in an afternoon. For having "a powder coat finish" the paint does chip quite easily. Draw-Tite should research better finishes. It does look good an conceal well under the minivan so I'm happy with it. The mounting tab welded on the hitch for the connector mounting bracket is a really nice touch. I use the 7-pole connector as it's much more reliable over the years that a flat-4 connector. 636466


87
228
Show More Reviews

Ask the Experts about this Draw-Tite Trailer Hitch
Do you have a question about this Trailer Hitch?


  • Recommended Trailer Hitch for 2019 Toyota Sienna for Ground Clearance
  • The trailer hitch I recommend for your 2019 Toyota Sienna is the Draw-Tite Trailer Hitch # 76112 because if you plan on towing, this hitch is rated for weight distribution and the similar hitches are not. When we test fit the Draw-Tite Hitch # 76112, Curt Hitch # C13343, etrailer.com Hitch # E98853 and EcoHitch # 306-X7255 on a 2019 Toyota Sienna we found that each of them have 13 inches of ground clearance, and with the exception of the EcoHitch, have a 525 lb tongue weight capacity...
    view full answer...

  • Best Trailer Hitch for a 2016 Toyota Sienna
  • Actually the Draw-Tite # 76112, Curt # C13343, etrailer # e98853, and EcoHitch # 306-X7255 all install so that only the receiver is showing. A lot of people like this look instead of having a thick piece of steel underneath their vehicle as well. You are correct in choosing a Class III trailer hitch with a 2" receiver over a Class II trailer hitch with a 1-1/4" receiver. The reason being that they are stronger and they are compatible with many more accessories. For your application I...
    view full answer...

  • Why Does Draw Tite Hitch # 76112 Have Longer Install Time Than Other Hitches
  • The reason the part # 76112 takes longer to install than the other hitches that fit your 2017 Toyota Sienna is that it installs higher than the other hitches and only has a visible hitch opening where the other hitches hang down further below. I attached two pictures. The one that shows the underside of the rear of the vehicle is the # 76112 and the other is the # 75237. So long story short, the # 76112 gives you a hidden look that is much more desired and also has the hitch a bit...
    view full answer...

  • Which Trailer Hitch for a 2012 Toyota Sienna Has the Most Ground Clearance
  • I do have ground clearance measurements for the etrailer.com Trailer Hitch Receiver part # E98853, the Draw-Tite Max-Frame Trailer Hitch Receiver part # 76112, and the Curt Trailer Hitch Receiver part # C13343 but we have not had a chance to install all of these on a 2012 Toyota Sienna yet. Also, the ground clearance measurement we take will likely be different that what you have even with the same year as the tire size and cargo in the vehicle will all play a factor into ground clearance. When...
    view full answer...

  • Difference of Class III Trailer Hitches for 2018 Toyota Sienna
  • There are a number of Class III trailer hitches designed to fit the 2018 Toyota Sienna. In my opinion you can break them up into two groups that distinguish the biggest difference: those with a visible cross tube and those with a concealed cross tube. I prefer the crosstube to be hidden behind the rear bumper, like with the Draw-Tite # 76112, Curt # C13343, and EcoHitch # 306-X7255. This is shown in the picture of the gold Sienna. To me this is a very clean look and appears more like...
    view full answer...

  • Weight Distributing Hitch Recommendation for 2014 Toyota Sienna Towing Pop Up
  • A weight distribution system will help with the sag you have at the rear of your 2014 Toyota Sienna when towing. As long as you have a hitch installed on your vehicle like the Draw Tite part # 76112 which is rated for WD use you'd be set. Since you have minimal ground clearance you'll want to go with a trunnion bar weight distribution system since they have superior ground clearance over the round bar setups. For that the Fastway e2 kit part # FA92-00-0450 would be a great option as...
    view full answer...

  • Differences of Curt and Draw-Tite Trailer Hitches for 2018 Toyota Sienna
  • There are a number of similarities between the Draw-Tite # 75237 and the Curt # C13105. They both install onto your 2018 Toyota Sienna in the same way and have a similar look to them. Their capacities are different, with the Draw-Tite being higher, but the Curt is also rated more than you're van so that really isn't a factor. I went out to the warehouse and took a couple measurements to compare the two. The Draw-Tite will sit a little higher off the ground by about an inch but they'll...
    view full answer...

  • Trailer Hitch Recommendation for 2019 Toyota Sienna for Towing Pop Up
  • You'll need just a few things to tow a trailer with your 2019 Toyota Sienna but let's first start with a hitch. For that I recommend the Draw Tite part # 76112 because it has a 2 inch opening which means it has plenty of towing capacity, has a concealed crosstube which means it's mostly concealed, and because it has a great price. I attached a picture of what the hitch looks like installed as well as a link to an install video for the hitch for you to check out as well. A ball is not included...
    view full answer...

  • Comparing the etrailer.com E98853 and Draw-Tite 76112 Trailer Hitches for a 2019 Toyota Sienna
  • The etrailer.com Trailer Hitch Receiver part # E98853 and the Draw-Tite Max-Frame Trailer Hitch Receiver part # 76112 are both great options for your 2019 Toyota Sienna XLE. They both have a hidden design, install in the same fashion, and are similar priced. In regards to ground and bumper clearance they are identical at 13" from the ground to the top inside edge of receiver tube and 4" from hitch pin hole to outer edge of the bumper. They also have the same weight capacity. Therefore,...
    view full answer...

  • Trailer Hitch and Wiring for a 2018 Toyota Sienna with All-Wheel Drive
  • Yes, Draw-Tite trailer hitch # 76112 will fit your all-wheel drive 2018 Toyota Sienna. I have included a link to a video showing an example installation for you. If you plan on doing some towing I recommend etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch ball, 2 inch ball, hitch pin with clip, and a storage bag. If the ball mount kit does not have the...
    view full answer...

  • Recommended Trailer Hitch for Best Ground Clearance on 2017 Toyota Sienna
  • Because of the way it mounts to the vehicle frame, the Draw-Tite Class III Max-Frame Trailer Hitch Receiver # 76112 is actually going to have the best ground clearance when compared to the other trailer hitches confirmed to fit your 2017 Toyota Sienna, including the 1-1/4 inch options. That is because this particular hitch installs higher than the alternatives to provide a hidden look with the cross tube, and this in turn will offer better ground clearance. I have attached a demonstration...
    view full answer...

  • Does Draw-Tite Hitch 76112 Include All Parts to Complete Installation on 2017 Toyota Sienna SE
  • The majority of trailer hitches we sell, including the 2-inch Draw-Tite Max-Frame hitch # 76112, come complete with all required mounting hardware and detailed installation instructions. Those instructions, which are linked for you, include a listing of the tools needed. I also linked for you an installation video showing this hitch installed on your exact same 2017 Sienna. You only need a wiring harness if you intend to tow a trailer that has lights, or if you want to use any other...
    view full answer...

  • Is the Ultra-Fab Steel Roller # UF48-979020 Compatible with a Hitch Receiver for a 2011 Sienna XLE
  • Although the Curt # C13105 and # C13343 as well as the Draw-Tite # 76112 are confirmed fits for your 2011 Toyota Sienna XLE, they are not compatible with the Ultra-Fab Steel Roller # UF48-979020 due to the safety chain loops. Out of the trailer hitch receivers that you referenced I recommend installing the Curt Trailer Hitch Receiver # C13343 because it installs up and under your rear trim. The only part of it that is visible is the actual hitch receiver opening and safety chain loops....
    view full answer...

  • Towing Capacity of 2017 Toyota Sienna LE with Tow Package
  • There are a few ways you can determine all of the specific equipment on any given vehicle, including "tow package" components. One is by having a local dealership run the vehicle's VIN which will show all of the factory-installed components. I checked Toyota's online data for the 2017 Sienna and in the specifications section there is a listing of all 8 of the versions of this van, the L, LE, SE, SE Premium, XLE, XLE Premium and the Limited and Limited Premium. This information indicates...
    view full answer...

  • Will There be any Issues if Accidently Over Torque Hitch Mounting Bolts
  • Over torqueing the mounting bolts on your Draw-Tite Trailer Hitch Receiver, # 76112, may stress the mounting bolts to the limits and could cause a failure of the hitch. I recommend replacing the mounting bolts with # RHK. The # RHK is a replacement hardware kit for your hitch. At the product page of this part it will ask you to input your trailer hitch number and the hitch manufacturer. Once reinstalled, make sure to torque to the recommended specs that are listed in the hitch installation...
    view full answer...

  • Hitch Recommendation for 2014 Toyota Sienna
  • For a trailer hitch confirmed to fit your 2014 Toyota Sienna with a concealed crosstube the hitch I would recommend is the Draw Tite part # 76112. This hitch costs a bit less and if you were to ever want to carry a bike rack this hitch would not require you to use a stabilizer strap like the Curt requires. I attached an install video for this hitch for you to check out as well. For trailer wiring I do recommend the Tekonsha kit # 118498 as this brand is the most reliable option we carry....
    view full answer...

  • Will Draw-Tite Class III Trailer Hitch Receiver Fit on All Models of 2016 Toyota Sienna
  • The Draw-Tite Max-Frame Trailer Hitch Receiver # 76112 is a Class III hitch that is a confirmed fit for all 2016 Toyota Sienna models. If you plan to tow with your van the Tekonsha Wiring Harness # 118498 will provide a 4-way connector for you. This harness plugs into connectors behind both tail lights and doesn't require any wire cutting. I've attached a link to our selection of ball mounts for you. The Curt Class III # C45067 is a great option that gives you either 2-1/2 inches...
    view full answer...

  • Recommended Trailer Hitch for 2018 Toyota Sienna to Tow Boat Trailer
  • You are certainly correct that there are quite a few trailer hitches available that are confirmed to fit your 2018 Toyota Sienna. In addition to the manufacturer, these hitches primarily differ in their weight capacities and how they actually mount to the vehicle. For your application I recommend the Draw-Tite Max-Frame Trailer Hitch Receiver # 76112 for a couple of reasons. The biggest appeal of this particular hitch is that it features a hidden design where only the receiver will...
    view full answer...

  • Parts Needed To Tow a Pop-Up Camper with Brakes Using a 2015 Toyota Sienna
  • The list of parts you will need to tow a pop-up camper with your 2015 Toyota Sienna are as follows, trailer hitch, 4-way trailer wiring harness, 4 to 7-way trailer wiring harness, brake controller, and a ball mount/hitch ball. For a trailer hitch, I recommend the Draw-Tite Max-Frame Trailer Hitch Receiver part # 76112 because it has a hidden cross tube (see photo) and it can be used with weight distribution. This is the only trailer hitch available for your Sienna with these two features....
    view full answer...

  • Determining If 2018 Toyota Sienna XLE has Factory Tow Package and Recommended Trailer Hitch
  • Based on my research it looks like the factory towing package for the 2018 Toyota Sienna consists of an engine oil cooler along with a heavy-duty radiator and fan. The factory towing package is standard for the XLE model like what you have. With the tow package the Sienna XLE has a towing capacity of 3,500 pounds. In order to tow a trailer you will first need a trailer hitch. For this I recommend the etrailer.com Class III Hitch # e98837. This custom hitch is confirmed to fit your vehicle...
    view full answer...

  • Recommended Items To Make 2018 Toyota Sienna Tow Ready
  • Yes, if you are going with the Draw-Tite Max-Frame Trailer Hitch Receiver # 76112, add a transmission cooling is always a plus to preserve the life of your vehicle. I recommend the Derale Series 8000 Plate-Fin Transmission Cooler Kit # D13502. This is one of the more popular cooling systems available, the radiator-style, plate-and-fin heat exchanger provides increased surface area so that fluids can spread out along the finned chambers to cool faster. The overall dimensions are 11" wide...
    view full answer...

  • Trailer Hitch for a 2018 Toyota Sienna with Rear Camera and Backup Sensors
  • EcoHitch does not have a statement on if hitch # 306-X7255 excludes any version of the 2018 Toyota Sienna or not. But the similar Draw-Tite hitch # 76112 is shown to fit all styles of the 2018 Toyota Sienna. Since both hitches install in basically the same way you could come to the conclusion that the EcoHitch also fits all styles of the 2018 Sienna and that would include models with the rear backup camera and sensors. The dealer is probably talking more about the sensors detecting a...
    view full answer...

  • Can Trailer Be Towed With 2016 Toyota Sienna AWD
  • In my research I found the owner's manual does not recommend towing with your 2016 Sienna if it does not have a towing package. If you have the towing package the trailer hitch I recommend for you is the Draw-Tite # 76112. This is a Class lll hitch and it has a 2 inch receiver opening. Since you plan on doing some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise...
    view full answer...

  • Brake Controller and Wiring Recommendation for 2014 Toyota Sienna
  • You will need to start with a 4-way (if you do not have one) on your 2014 Toyota Sienna. For that you would want the # 118498 which is a confirmed fit. From there you would need to convert the 4-way to a 7-way so that you can install the brake controller. For that you will want the Brake Controller Install Kit and 7-Way Adapter part # ETBC7. I attached installation instructions and an install video for this product as well. For a brake controller I would recommend the Prodigy P2 Brake...
    view full answer...

  • Trailer Hitch Recommendation for 2017 Toyota Sienna
  • Since all of the trailer hitches for your 2017 Toyota Sienna require some underbody trimming, and for a few more reasons that I'll get into, the best option is the Draw Tite trailer hitch part # 76112. This is a 2 inch hitch which is the most popular size and has the most capacity, it has a concealed crosstube so it will be less visible than most, and would not require a stabilizer strap like the Curt hitch would if you ever carried a bike rack. I attached an install video for more info...
    view full answer...

  • Recommended Trailer Towing Package for 2016 Toyota Sienna
  • Your 2016 Toyota Sienna is between 4,375 and 4,705 lbs curb weight. Your owners manual states the gross trailer weight must never exceed 3,500 lbs and if over 2,000 lbs a sway control device is needed. It also states a trailer over 3,000 lbs should be a dual axle trailer. Finally it states any trailer over 1,000 lbs should have a trailer braking system. So for your 1,800 lb trailer, I recommend the brake controller wiring kit # ETBC7L along with the Curt Echo brake controller #...
    view full answer...

  • Will the Draw-Tite # 76112 2015 Fit Bumper on a Toyota Sienna LE Sport Edition
  • The Draw-Tite Max-Frame Trailer Hitch Receiver # 76112 is confirmed to fit all models of the 2015 Toyota Sienna including your LE Sport Edition. If you check out the picture I attached you can see that a customer was able to install it on their Sienna SE without a bumper clearance issue. Let me know what you will be using the trailer hitch for and I can make additional recommendations if necessary.
    view full answer...

  • Best Trailer Hitch Receiver and Other Parts To Tow a Trailer with a 2016 Toyota Sienna Limited
  • The best trailer hitch receiver for your 2016 Toyota Sienna Limited is the Draw-Tite # 76112. This is my top choice because once it's installed on the van all you see is the receiver opening and safety chain loops. The cross tube is hidden under the van. If you're going to be towing a trailer you'll also need a wiring harness. The Tekonsha # 118648 will provide you with a 4-way trailer connector at the rear of the van. It plugs into connectors behind both tail lights and also has...
    view full answer...

  • Recommended Trailer Hitch for Towing with a 2017 Toyota Sienna
  • Since you're looking for a trailer hitch that is more concealed I recommend using the Draw-Tite Max-Frame Trailer Hitch Receiver # 76112 for your 2017 Toyota Sienna. Not only does this have a concealed crosstube but it also has the receiver that sits farthest back as the hitch pin hole is 4" from the edge of the bumper when compare to other hidden hitch styles. This also features a mounting bracket for your wiring so that you can keep it located right there at the bumper. For trailer...
    view full answer...


Do you have a question about this Trailer Hitch?




  • Why etrailer.com?

    At etrailer.com we guarantee:

  • Highest quality trailer hitch for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer hitch information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Satisfaction Guarantee
    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Edited by:
Lindsey S
Expert Research:
Michael H
Expert Research:
Jameson C
Video Edited:
Joshua S
Video Edited:
Jacob T
Expert Research:
Adam R
Video Edited:
Kathleen M
Video by:
Dustin K
Expert Research:
Jeffrey L
Test Fit:
Randy B
Video Edited:
Chris R
Updated by:
Sarah W
Written by:
Alexander C
Test Fit:
Brent H
Photos by:
Jeffrey L
Test Fit:
Robert C
Updated by:
Hannah L
Test Fit:
David F
Test Fit:
Ryan G

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!

Call 800-298-8924