Curt Trailer Hitch Receiver - Multi Fit - Class II - 1-1/4"

Curt Trailer Hitch Receiver - Multi Fit - Class II - 1-1/4"

Item # C12923

lowest price pledge

Retail:$217.21

Our Price: $135.16

You Save: $82.05
Trailer Hitch

This item qualifies for Free Shipping

Shipping Weight: 33 lbs

Quantity: 
In Stock, Ships Today
Curt Custom Fit Hitch - C12923
zoom in icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
Please enter a valid email address.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

pop out icon replay 360 icon
horizontal rotate icon

Product Images


  • Curt
  • Class II
  • 1-1/4 Inch Hitch
  • 3500 lbs GTW
  • 350 lbs TW
  • Custom Fit Hitch
  • Concealed Cross Tube
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Semi-custom hitch is designed to fit several makes and models. Gloss powder coated steel construction. Lowest Prices for the best trailer hitch from Curt. Curt Trailer Hitch Receiver - Multi Fit - Class II - 1-1/4" part number C12923 can be ordered online at etrailer.com or call 800-298-8924 for expert service.


  • All Info
  • Q & A (4)
  • Photos
  • Why etrailer?

Curt Trailer Hitch - C12923

This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Semi-custom hitch is designed to fit several makes and models. Gloss powder coated steel construction.


Features:

  • Trailer hitch lets you tow a trailer or carry a bike rack or cargo carrier with your vehicle
  • Semi-custom hitch is designed specifically for installation on several different makes and models
  • Precision, robotic welding maximizes strength and improves fit
  • Bolt-on installation - no welding required
    • Complete hardware kit and installation instructions included
  • Lifetime technical support from the experts at etrailer.com
  • Gloss black powder coat finish over protective base coat offers superior rust resistance
  • Sturdy, square-tube design
  • Ball mount, pin and clip sold separately
  • Made in the USA


Specs:

  • Receiver opening: 1-1/4" x 1-1/4"
  • Rating: Class II
    • Maximum gross trailer weight: 3,500 lbs
    • Maximum tongue weight: 350 lbs
  • Limited lifetime warranty



etrailer.com Technical Support

At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.



12923 Curt Class 2 Trailer Hitch Receiver



C12923 Installation InstructionsInstallation Details C12923 Installation instructions



0
0

Ask the Experts about this Curt Trailer Hitch


  • Mounting Hole Spacing on Curt Trailer Hitch Receiver # C12923
  • The mounting holes on the Curt Trailer Hitch Receiver # C12923 are spaced apart exactly 4.4 inches front to back, on center. Horizontally left to right the mounting holes can be spaced apart as short as 31-1/2 inches to as long as 41-1/2 inches depending on how you adjust the crosstube. This Class II hitch features a towing weight capacity of 3,500 pounds and a tongue weight limit of 350 pounds. I have attached the written installation instructions that you can check out as well.
    view full answer...

  • Trailer Hitch Recommendation to Fit Travel Trailer for Carrying a Bike Rack
  • The width of a travel trailer frame is going to be wider than what the hitch you referenced would fit most likely. Instead Curt has hitches designed exactly for your application like the part # 13703 which fit frame widths between 22 and 72 inches apart on center. This also gives you a 2 inch opening instead which more bike racks are designed to fit.
    view full answer...

  • Trailer Hitch for 28 Foot Long Kola Trailer
  • It sounds like you are wanting to install a trailer hitch on the rear of your trailer and if that is the case I do have an option for you but the Curt Trailer Hitch Receiver part # C12923 will not work because the mounting flanges most likely won't line up with your trailer frame. Therefore, you will want to use an adjustable trailer hitch, the Adjustable Width Trailer Hitch Receiver part # 13703 which can accommodate trailer frames up to 72" wide. The side brackets included with this hitch...
    view full answer...

  • What Does Curt Trailer Hitch # C12923 Weigh
  • The Curt hitch part # C12923 weighs 33 lbs total and has a capacity of 3,500 lbs trailer weight and 350 lb tongue weight.
    view full answer...





  • Why etrailer.com?

    At etrailer.com we guarantee:

  • Highest quality trailer hitch for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer hitch information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Satisfaction Guarantee
    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Expert Research:
Jameson C
Photos by:
Jeffrey L
Updated by:
Kristina F
Updated by:
Isabelle B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.