Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
This item does not fit your vehicle
2017 Ram 2500
These items fit your vehicle
2017 Ram 2500
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.
Features:
Specs:
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
California residents: click here
Fits very nice on the Charger. It does set very low which we knew would happen but will work great for our bike rack for our Bike Patrol Officers.
The box was damaged and some of the contents were lost. minor scratches to the hitch part which personally is not a issue, only the missing assembling parts is an issue to me. The delivery was missing two washers and a a nut. due to the parts being easily replaceable the 4 starts, I would recommend placing all assembling parts securely to the hitch itself rather than loose in the box.
Fit and finish are very good. Working on a 7 year old dual exhaust Charger, it took me a little over two hours to get it done rolling around on the floor by myself. Most of that time was taking the exhaust apart and removing the exhaust fascia chrome things. Those didn't make it back on. Passenger side bolts not the easiest to get to, but the fishwire thing worked perfectly.
With my 2 sons installation went well. We've used the hitch up hold our bike rack as well as a small metal shelf top transport items such as ice chests and suit cases. I have to be careful over speed bumps or it will hit. This hitch has come in very handy.
Took about 2 hours to install the fish wire worked amazingly well. Had to remove rear bumper and do exhaust. Rebolting the rear hangers were tricky as the hitch does get in the way. Overall very happy with product. Shipping was very quick the box was damaged but the hitch was not. That is on the carrier such we'r sl know they don't handle packages with the greatest care.
Product looks great and is well built, paint scratched off due to box failing and end of part sticking out of box and scraped. Carrier damage I guess. Otherwise a great experience. Would order again.
Dan
8/3/2018
Things are great. The car can scrape the receiver sometimes but all else is great. Im probably one of the few that ran a lawn care company off a challenger.
Great looking hitch install went very easy. Only problem I had was one bolt holes had to be modified due to it being slightly off.
Walter
8/30/2020
Great product and has work without any problems.
Great product and instructions. Ordered and received the next day!!! I installed it in my driveway in 30 minuets. The video that is on YouTube by etrailer is spot on.
bolts up easy. Does what I need. Use it to haul my utility trailer. I like that this product is a direct fit. Comes with everything needed to mount up to the car.
Quick delivery easy install I had to get a extension for my car only car my bumper is so big.
The fit and finish was excellent... My only problems were in the installation on a 5 year old vehicle (2011 300 C)... The weld nuts were corroded, and on the passenger side, the limited access with the tail pipe in the way made it a chore to clean the threads enough to get the bolt to tighten properly... Also, there was no mention of the chrome exhaust tips that are cumbersome to remove and install with the tailpipes in place... Since you can get to the driver's side easier after removing that tailpipe, it would have been nice to know that it can be left in place until the tailpipe is removed. The passenger side is another story, it must com off to allow the pipe to come down enough to get the hitch slid in place... Other than those two things, the instructions were really good...
Mike T.
1/30/2018
I am happy with the product. It is a bit low and hits some speed bumps and curbs when backing into parking spaces... But it is robust and has served us well. We mostly use it for my wifes Hoveround mobility chair, so it has been good...
Absolutely solid.
Great product!
Michael W.
10/3/2021
Still working well with no issues. Great product.
Etrailer is the only place I get my trailer hitch
I got 4 so far and everyone was just as I ordered
All the instruction were were easy to follow
Russell
11/2/2019
It has been great Its the 3rd trailer hitch I bought from you .. thanks
Purchased for installation on 2016 Chrysler 300 V6. Instructions showed a flange on the exhaust system to permit removal of one of the (two) mufflers essential to mount the hitch. Unfortunately, the exhaust system on this particular car was fully-welded from the factory. There was no way to slide the hitch into position even with all exhaust system hangers removed to permit sag. I had to cut one of the mufflers off; then sleeve & clamp it back to original location. Ugh. Someone missed this feature. I wish the hitch had been 2-piece to permit mounting both "ears" into position then bolting the crossmember into place.
I am 68 years old and get around in a wheel chair...after jacking up my newly acquired 2013 Chrysler 300C SRT8, I single handily removed the stock exhaust system as I was replacing it with an aftermarket performance setup...now was the opportune time to install the trailer hitch receiver with nothing in the way...the instruction were spot on...everything was included...3 bolts and washers threaded right in...3 plates and bolts fished in, and then were tightened down with nut/washer assemblies...total job lying on a creeper using impact tools was 35 minutes by myself...now I am just waiting for the small trailer to arrive that will carry my 3-wheel scooter with a tongue weight of 18 lbs. instead of using a Harmar lift attached to the rear of my car and forcing the rear to sag big time...I am over joyed!!!
Product well made at fair price. Haul a 4x8 utility trailer for wood products. Only annoyance is how low the tow body sits. I hit the bottom of the hitch bar on some low driveways. It would be nice if the body was a little more streamline without sacrificing strength. My car is a 2015 Dodge Challenger Scatback which is low to begin with. Overall happy with the purchase and service.of the dealer. Would buy again unless a more streamline and or concealed item was available.
Thank you for the follow up on my purchase. Your customer care is outstanding! I would like to comment on the hitch for my 2014 Dodge Charger. It's well built and a huge plus, it's made in the USA. Something that should be noted is that the 2014 Chargers muffler system is a bit different than what is depicted in your installation video. The passengers side muffler can not be disconnected and removed. It can be released from the hangers to give room for the installation but not removed because it is welded to the drivers side exhaust about half way to the engine. This provides little room to work around muffler making it very difficult to tighten the bolts on the passengers side. However, I was able to complete the installation and the product looks, and works great.
The 2014 Charger trailer wiring harness couldn't be easier. It really is a plug and play. Thanks for the great products and service. Dan
Easy to install and excellent fit and finish to my Chrysler 300. I use it for airport runs and being able to tow a small luggage trailer is important, especially when clients wish to bring their golf clubs.
Jim P.
4/21/2016
Everything is working well. Im glad to have etrailer my primary source for my towing needs. Respectfully,
Excellent product. Well designed. Solid. Installation itself is somewhat difficult. Had it not been for Curt's excellent video I would still be under the car!!
Thos
8/25/2015
Drags on some driveways and speed bumps. I would not recommend for a Charger. The car is too low, though it pulls a trailer effortlessly.
Arrived very quickly to like 30 min to install looks great highly recomend .
Product is absolutely excellent, purchasing and delivery, five star! Materials, instructions and products to do the installation, absolutely the best. They even include fishing wires for the bolts and washers. I would recommend etrailer.com to everyone I know and don't know; they are absolutely "the whole package"; don't accept anything less! Sorry, I don't have any pictures of the installed product, but everybody says it looks great on our 2014 Chrysler 300.
Should be an inch or so tighter up to the rear bumper cover. Hitch gets very close to the road and drags very easy. If it fit tighter it would drag less.Box you shjipped in was TERRIBLE! When I got it, the hitch had blown holes in three places. Good thing the fastners and instructions were taped to the hitch
2016 Dodge Charger SXT. Great product. Direct bolt up with no drilling necessary. The install was painless. If your installing this in a state like New York the threads on the holes that are already on the car had a little build up of rust and dirt in them. Worth getting a tap to clean out the threads before install. Or even on if the wire brushes for plumbing. Overall totally worth the money. I purchased this so I don’t have to scratch my trunk with a bike rack and it will work perfectly. Definitely would recommend to anybody as long as you keep in mind I installed this on a 4 year old car. The older it is you may have to do more prep and cleaning before install.
Do you have a question about this Trailer Hitch?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
David
4/26/2022
After a year, hitch is holding up great. The parking garage at work is old and has steep ramps...I drag it on at least one going up and one going down every day. No noticeable damage yet. Does great with the bike rack and anything else I needed to do. And I took the time to plasti-dip those chrome exhaust things and reinstall them, whole package came out great.