To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.
Features:
Specs:
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
Average Customer Rating: 4.7 out of 5 stars (152 Customer Reviews)
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.This was an easy install (2015 Jeep Latitude). I did almost all the work by myself (65 years old). A few blocks of wood helped. The hardest part was running the hot wire to the battery and that little self-tapping ground screw. The screw fell out of the bit holder and drop down into the body. Luckily it fell through to the ground (I should have put a rag underneath to catch it). I didn't need jack stands but I did have a 2" ledge that I was able back onto and that gave me plenty of room underneath. I'm very pleased with the results.
Installed the etrailer hitch on our 2015 Jeep Cherokee Latitude in about 1.5 hours and am very satisfied. The delay wasn't anything to do with the thorough instructions and complete parts included, only to wait for a friend to come help lift the hitch into place. This is definitely a two person install due to the weight and tight quarters plus having the right sockets, torgue wrench and garage space. Would purchase from etrailer again without question. Fast Delivery, complete instructions and value will be remembered about this project. Thank you.
Lucia - 10/30/2018Order processed fast delivery was quick and installation was just as promised.
Extremely easy to install. Now I just need to figure out wiring so I can use for towing and not only bike rack
My installation was on a 2019 Cherokee Trailhawk 3.2. No difficult with minimal mechanical skills, and having a lift and a trans jack made it an easy one person job. In addition to the existing M14 bolts, I did need to "reverse fishwire" 1/2" bolts for the front attachment holes (see photo). Before lifting the hitch in position I recommend trial fitting the bolts to the hitch and file/Dremel if clearance is needed.
Trailhawk owners will loose a lot of "departure angle" ground clearance with this under-slung hitch - see photo.
Everything about this hitch receiver was wonderful. The communication from eTrailer, the instructional videos (spot on and VERY CLEAR),and the build quality of the receiver itself was really awesome. I am VERY happy with the purchase.
Had used etrailer.com before and had such a very nice experience, so when I recently bought a new Jeep and needed A new hitch receiver, I knew where to begin. After reading the reviews and watching videos, I decided on Curt 13171. Installation with the etrailer video and directions couldnt have been simpler. Took about 30 mins to get done. A concern I had was dropping the muffler down to get to the access holes and I was able to install it without doing that. Perfect fit, functional, looks great, and priced right. Very satisfied. I cant recommend etrailer and this receiver more highly. Thanks so much.
Everything was great, the online instructional videos were easy to follow. This is not only a 5 star item, but a 5 star company as well. Shipping was fast only took about 4days to get here. I will only buy my parts from etrailer for now on.
The product showed up in a box that was nearly destroyed. Which was understandable because the trailer hitch bracket is heavy and oddly shaped. However when trying to install it onto the frame it didn't fit. After measuring the hole spacing it was off by about 1/2" center to center. It required us to bend the bracket back to shape (it must have been dropped or ran over during shipping). Once the bracket was fixed it went on fairly easily, just like it was designed to fit!
Thomas M - 11/30/2021I have purchased several hitches from this company now and have always been very pleased with the quality of their products. The additional installation instructions and customer support is outstanding as well. Will be ordering another hitch for my son soon...
Good quality hitch and harness. Very helpful videos supplied by etrailer and easy for this retiree (age 71) to install.
Haven’t field tested yet, but the installation was a breeze with some minor help from my wife for her small hands. Installation videos were spot on. Ordered because I found a lady stuck in a ditch and didn’t have one single hitch point on my 2019 Cherokee. Fit test with an 8 1/2 ton shackle. Pin slides right into the hook points.
installed the hitch without a hitch Installed with no problem Took about one hour
Very happy with the hitch. Took me longer to install than the estimated time (2 hours) but I am 65 and so is my helper (wife). The directions were perfect. I purchased this so I can put a bike rack on my jeep.
I weighed all the options about buying a hitch for a new model car online, and decided to buy from etrailer since I read reviews about the great customer service. There was an issue with my shipment and, in fact, the customer service was outstanding and they worked with me on a quick resolution. The hitch was installed on a 2017 Jeep Cherokee and it looks great! I was concerned that since it is not a hidden hitch it would detract from the car, but you can barely notice it. It took about two hours to unpack, read the instructions and install it. We had two people but we used a hydraulic floor jack to lift and keep in place, so it could have easily been a one person job. The instructions were very clear. Had a little trouble with torching the last bolt because of the limited room available. Buying and installing ourselves saved us hundreds of dollars. We are using it for a bike rack and a flatbed trailer. I noticed that the wrap had worn off during transit on all the edges, so maybe covering those edges with cardboard before wrapping would prevent that.
This product came 1.5" short & would not fit my vehicle. I had to take it to a shop who almost didn't do it because it could destroy the weld & warranty. I understand a slight bend from shipping, but it was excessive. They customer service from Rodney was mediocre.. Jesse was great in assisting me with finding the right one for me. I just wasn't expecting the extra work.
Sierra K - 11/29/2021Installed by myself..used floor jack..wife helped balance it with pipe in receiver...had to remove stabilizer bars to get muffler in..easy enough..awesome product
The Curt trailer is easy to install for someone who is handy.
The installation does not involve any cutting of the bumper fascia
which is great since my Jeep Cherokee is a leased vehicle.
I needed this hitch for my mountain bike rack and my Jeep gets me to those back mountain trails. Ride on!
Quick delivery. Easy instructions.Great fit. No problems.
Two 72 year old guys installed your hitch. We've learned to use our heads as our brawn is waining. My buddy has a lift, so we lifted the Jeep. We placed the hitch on a transmission jack after fishing the bolts in place. Fed the wires into the correct hitch mounting holes and lifted the hitch into place. Less than an hour and it was beer thirty.
Got home and attached my bike rack....all is well.
Thanks for a great product.
I'm very happy with this hitch and the service provided by etrailer. The fit was perfect to make the install easy. Thanks!
We use this trailer hitch for connecting a bike rack and it works just as expected. No issues at all, definitely worth a recommendation. Installation was comparably easy, it is however a two man job and you need a good, sturdy torque wrench...no different than on any other trailer hitch.
Thomas K - 04/21/2019Excellent product. The company was easy to work with.
This trailer hitch was amazing and it fit perfectly.
Installed in about 30-45min. Just used regular floor jack on one side to give a little room to slide under. A swivel on the torque wrench may help depending on the style. The rear most bolt was a challenge to get torqued, may have been due to not having the jeep on a lift.
Every thing worked out great
Do you have a question about this Trailer Hitch?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.