Video Transcript for Comprehensive Review: Replacement Hitch Ball for Curt SecureLatch Pintle Hook

Today we're going to take a look at the replacement two inch hitch ball for the Curt secure latch pinto hook. Now this part will replace the hitch ball that's on your Curt secure latch combination pinto hitch with the hitch ball. This accepts two inch couplers. Also, it will accept the lunette ring with either a two and a half inch or three-inch inside diameter. As you can see, it does include the washer and the nut for installation. It does have a nice corrosion resistant zinc finish on both the ball and the hardware.When you go to install this, you'll drop it through, put your washer up, and then take your nut and go ahead and tighten that down to the factory torque specs.A few specs on this, the diameter of ball is two inches.

The weight capacity, which is stamped on the top, is 10,000 pounds and the shank diameter is going to be right at one and a quarter inches, and the shank length is right at three and a half inches.But that should do it for the review on the replacement two inch hitch ball for the Curt secure latch pinto hook.