Replace 1 worn or damaged backing plate on your single-axle trailer fender (HP36VR). Backing easily blocks water and road debris from hitting the side of your trailer. 18-Gauge steel is durable.
Features:
Specs:
Note: Backing plates are not to be used for mounting your fender.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello, everybody. This is Jeff at etrailer.com. Today, we're gonna take a look at this precut steel backing plate for single axle trailer fender. Now, this backing plate will protect the side of your single axle trailer from any water or road debris by using this fender backing plate on the fender. You can see it as precut to fit and easily weld onto your single axle fender. And this one is specifically designed to fit a single axle trailer fender that has a 90 degree back lip on the fender.
Meaning it'll give us, the fender will have the back lip that goes mounts onto the trailer will have a 90 degree lip on it. And that edge will give you an area to where you could weld this backing plate to it. Now, we do sell the fender separately on our website that this part will fit on. It's part number HP56VR. And it's usually listed on this product page as a related product.
Now, this will also fit other fenders that have a length of 32 inches and a height of 15 inches. As I mentioned, it's a weld-on installation. It is an 18 gauge steel construction. It is made in the USA. It is for a quantity of one backing plate.
And the last thing I wanna do is just give you the measurements on this backing plate itself. So, if we do the length. The length from one end to the other is right at 31 inches. And if we do the height. Overall height.
The very middle at the tallest point is gonna be right at 12 inches tall. But that should do it for the review on this precut steel backing plate for a single axle trailer fender..
Average Customer Rating: 4.9 out of 5 stars (14 Customer Reviews)
Replace 1 worn or damaged backing plate on your single-axle trailer fender (HP36VR). Backing easily blocks water and road debris from hitting the side of your trailer. 18-Gauge steel is durable.The perfect store for trailer parts. Excellent service and prompt delivery.
Came as advertised, welded up nicely.
Arrived on time. Will try and install later.
shipped quickly.
Great fit thanks
The product seems to be made very well. I like it because it is already shaped to my fender. I am replacing one that is missing. Keeps water and debri off of the boat.
Good quality thanks
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.