Do Electric Trailer Brakes With Parking Brake for 6k Axle Work on 7k Axle
Updated 10/19/2020 | Published 10/16/2020 >
Products Featured in This Question
Question:
I want to setup a 7k axle with electric brakes and parking brake. This is for an axle swap on an M105. Parking brake is critical. I have already reviewed your response to the question Adding Brakes vs. Replacing Axle on M105 Trailerinch but it does not address the parking brake issue. From what I can find, the electric brake with parking brake for the 7k axle does not exist. Will the 6k electric brakes with parking brakes bolt on to the 7k axle? Would these be a better solution vs going with a 6k axle in terms of total strength, etc...? Assuming the above assembly is possible, is it less expensive to get the 7k axle beam and add the hubs and brakes, or is it less expensive to just buy a 7k complete axle assembly and swap in the 6k brake assemblies with parking brake Thanks!
asked by: Judah H
Expert Reply:
So long as you have a standard 5-bolt mounting flange on the axle such as the Brake Mounting Flange for 3" Round Axle # 4-44-1 you can use the 6,000 lb Dexter Electric Trailer Brake Kit with Parking Brakes # 23-112-113.
You will also need to have a 12" diameter x 2" wide drum for the brakes to fit in, and if you have those things, you can use these 6k brakes. You will also need the Mounting Bolts and Hardware for 12" Brake Assemblies # BRKH12.
As for the price, that really depends on the exact set up you get, but is likely less expensive to go with the parts separately, like the brakes with an axle such as # 8327864 and hub # 42866UC3-EZ.
Product Page this Question was Asked From
Brake Mounting Flange for 3" Round Axle
- Accessories and Parts
- Trailer Brakes
- Disc Brakes
- Electric Drum Brakes
- Hydraulic Drum Brakes
- Brake Mounting Flange
- 12 Inch
- 3 Inch Diameter Axle
- Redline
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Q&A: Replacement Idler Hub Options For A Dexter 8-135 Idler Hub
- Q&A: Looking For Brake Assemblies And Hubs For Dexter 4,400 lb EZ-Lube Axles
- Q&A: Does Trailer Hub of Same Weight Capacity but Different Bearing Have Different Offset
- Q&A: Replacement Hub/Drums And Electric Brakes for a 5200 lbs Axle
- Q&A: Adding Brakes to a Mobile Home Axle
- Q&A: What Brake Flange Works For A 3" Round Axle
- Article: Adding Electric Over Hydraulic Disc Brakes
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Parts Needed to Add Hydraulic Disc Brakes to a Trailer
- Article: Electric Trailer Brakes: How They Work & What to Buy
- Article: Most Popular Wheel Bearings
- Article: Parts Required to Add Electric Over Hydraulic Drum Brakes to a Trailer


