Are There 7K Trailer Axles The Same Width as a Ford F-250?
Updated 04/10/2024 | Published 04/09/2024
Products Featured in This Question
Question:
Can we get some 7k axles, same width as Ford f250?
asked by: John B
Expert Reply:
We are only going to have a 94" # 8327864 and 95" # 8327834 width for a 7,000lb axle beam. If you are wanting a solid axle beam like this the same width as your F-250 it would have to be special ordered from a local dealer. Otherwise we do offer the Timbren Axle-Less Trailer Suspension # TASR7KS01 which will allow you to customize the width of the axle based on the mounts. Each hub face will sit 6-1/4" from the frame rail it is mounted to. This system has its own suspension setup built in which may help make installation easier since it will take up a smaller foot print than adding hangers and leaf springs.
Product Page this Question was Asked From
Dexter Trailer Axle Beam with E-Z Lube Spindles - 94" Long - 7,000 lbs
- Trailer Axles
- Leaf Spring Suspension
- Standard Grade
- No Hubs
- 7000 lbs
- Spindles Only
- 79 Inch Spring Center
- 94 Inch Hub Face
- No Drop or Lift
- Dexter
more information >
Continue Researching
- Q&A: Recommended Replacement Straight Axle for a Carry-On Trailer
- Q&A: How Can I Determine The Weight Capacity Of A 6 Lug Axle
- Q&A: Bolt Pattern For Hubs on 7,000 lb, 94 Inch Long Axle
- Q&A: Can I Swap My Coleman Mach 10 for the Furrion Chill Cube RV 18,000 Btu?
- Q&A: How to Initially Adjust the Dexter Nev-R-Adjust Electric Trailer Brakes
- Q&A: Meaning of 8 on 6-1/2 Inch Bolt Pattern for Dexter Hub # 8-285-11
- Q&A: Determining the Correct Leaf Spring Length for Trailer
- Article: How to Measure a Trailer Axle
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Trailer Wiring Diagrams
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: Slipper Spring Trailer Suspension System Review
- Article: Double-Eye Trailer Suspension System Review
- Article: Most Popular Wheel Bearings