Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles - 7-Wire to 6-Wire Straight Cord
Item # RM-152-98146-7
Our Price: $193.08
Confirmed to Fit
2019 Nissan Versa
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (251)
- Q & A (0)
- Photos
2019 Nissan Versa - Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles - 7-Wire to 6-Wire Straight Cord
- Diode Kit
- Splices into Vehicle Wiring
- Tail Light Mount
- Universal
- Roadmaster
This complete kit includes everything you need to connect your RV's tail, brake, and turn signal lights to your towed car. Diodes prevent feedback and wire your car to operate as a combined system. Includes a 7-way to 6-way straight adapter cord.
Features:
- Complete wiring kit lets you connect your RV's tail, brake, and turn signal lights to your towed vehicle's lighting system
- Wires towed car as a combined lighting system so that brake and turn signals travel along same wire
- Diodes prevent electrical feedback and the damage it can cause to your car's electrical components
- 7-Wire to 6-wire adapter cord allows you to run power from your RV to your towed vehicle
- Straight cord is ideal for all-terrain tow bars and other tow bars that have channel guides
- 6-Way socket wires to harness and mounts on towed car with included bracket
- Sturdy, durable construction
- Powder-coated aluminum casings protect diodes from corrosion
- Electrical cord resists water, oil and chemicals
- Silicone-injected plugs prevent corrosion
- Kit includes:
- 4 Hy-Power diodes
- Wiring harness
- 7-Way to 6-way adapter cord
- 6-Way socket with mounting bracket
- Wire connectors
- Cable ties
- 1 Ring terminal
- 3' Long plastic loom
- Brake light relay (RM-88400 - sold separately) may be required if used with supplemental braking system
- Limited Lifetime Warranty
Specs:
- Maximum amperage: 85 amps
- Maximum voltage: 24 volts
- Adapter cord length: 6-1/2'
- Wire gauge: 16
- Wiring harness length: 30'
Note: For applications that have separate lighting, this kit will cause your brake lights to function as both brake and turn signal lights. A wiring converter (118158 - sold separately) and 2 additional diodes will be needed if you want to retain separate turn and brake signals.
Separate vs. Combined Lighting Systems
Some automobiles operate on a 3-wire system, wherein the brake signal and the turn signals travel along different wires to illuminate different lights. (Typically, these vehicles have amber turn signals.) This is referred to as a "separate lighting system". When you hook up for flat towing using this kit, your towed car's lighting system will operate in a combined fashion regardless of whether it typically has combined or separate lighting. This means that the brake and turn signals sent by your RV to your towed car will be carried on a single wire. As a result, your car's brake lights will do the flashing for the turn signals. Your vehicle will still function as designed when not hooked up to your RV.
Do You Need a Brake Light Relay?
Because this kit wires your vehicle as a combined system, a brake light relay (RM-88400 - sold separately) may be required if you use a supplemental braking system with your towing setup. A supplemental braking system depresses the brake pedal in your towed car every time you apply the brakes in your RV. So, if your towed car's brake lights illuminate when the brake pedal is pressed and the engine is off - as is the case when towing - then you need to install a relay to ensure that the lights on your towed car always act in accordance with the signals sent by your RV via the wiring harness. Without a relay, the brake signal from your towed car will override the turn signal sent by your RV when you slow down to make turns, creating a potential hazard.
RM-152 Roadmaster Universal Hy-Power Diode Wiring Kit
RM-98146-7 Roadmaster Wiring - Straight 6 to 7 - 78" Long
Installation Details
Customer Satisfaction Score:
96% were satisfied with this product
4% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- etrailer mistake
Customer Reviews
Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles - 7-Wire to 6-Wire Straight Cord - RM-152-98146-7
Average Customer Rating: 4.7 out of 5 stars (251 Customer Reviews)
This complete kit includes everything you need to connect your RV's tail, brake, and turn signal lights to your towed car. Diodes prevent feedback and wire your car to operate as a combined system. Includes a 7-way to 6-way straight adapter cord.by: Bill11/06/2023
The install on my Ford Maverick is clean and functional, so this is more of a customer service review... excellent customer service!
During the 4-day towing set-up install, the forecast was for freezing temps and my rig was not winterized. I called in mid panic and the motorhome was moved indoors.
A few months after using the tow set-up, a minor problem developed. I called and the CSR apologized and said, I can see how that might be frustrating, and a replacement cable (slightly longer) was sent free of charge.
by: Edward 05/16/2024
I also purchased brackets and receivers for the tow bar. Both were as advertised and are functioning very well. The staff were also very knowledgeable and helpful. Hard to find service of this kind in today’s world.
by: Phil 04/04/2024
The installation ins ructions and video were very helpful. The wiring kit worked perfectly.
by: Jason05/08/2023
Great kit. Easy to install. Connectors seem solid and wires are good.
by: Dean 10/18/2023
Roadmaster
The Roadmaster 4 diode wiring kit has worked great for a full towing season.
Easy installation, great instructions, and added safety while towing.
The wiring kit easily integrated into the other braking and towing system components.
Thanks e-trailer!
by: James02/24/2024
The installation took some time and the instructions need to be clarified.
by: Juan09/15/2021
2013 Subaru Forester
Works as expected. Connection feels solid enough. Have not had the opportunity to take it on a long trip yet.
One thing bit us in the butt, forcing us to cancel a trip at the last minute (when testing that our towed vehicle's turn signals, brake lights and supplemental brake system was working before driving off!): the left-turn signal prong in the male part of the connector (that plugs into the towed vehicle) was not opened enough, so no steady connection was being made because there was no contact between the prong and the walls of the female part. This had worked in a previous test. Picture included. Make sure to use a flathead screwdriver to open each prong up so full contact is made!
by: William 08/03/2023
This kit worked great. It was easy to install (etrailer offers installation videos if needed). I like this much better than a temporary set of lights on the towed vehicle. The cord and plug are also good quality.
by: Daniel05/02/2024
Easy install. Good directions. Works as described.
by: Steve05/27/2021
I chose the order by phone option. The website is well organized, but, I had gone too long without hearing another person. I have received several orders from etrailer after purchasing an RV last summer. I knew we would be Purchasing a Toad.
I don’t have any experience with towing another vehicle, so I had plenty of help in finding the right equipment for me.
The delivery times were all easily tracked and arrived in good condition. As md on time.
I had the simple tools required to install the base plate and hitch. The videos available on their site are clear and easy to understand.
I have had a great overall experience with etrailer.
by: Stephen B07/14/2023
I have not been disappointed with anything I have ordered from you.
This wiring kit should do the trick for my flat towing project.
I am sorry that I couldn’t get all of the pieces from you, the transmission pump and base plate was ordered from another company.
This is my fourth camper you are helping me keep maintained and improved.
2000 Cougar 5th wheel bunkhouse,2016 Sprinter 5th wheel front living room , 2021 Nexus 31t class C and a 2016 sprinter tow behind.
by: James04/10/2022
2019 GMC Acadia
Very straight forward install, easy to follow instructions. If you do this your self be prepared, the factory light wiring isn't very long or thick it was difficult to strip the wire back far enough to double it over to get a good connection. Upon completion of the wiring, I double checked all power at both plugs, it was all good, I installed the lights, brake and turnsignals worked great, I didn't have any running lights. About 3 min later they came on and stayed on. I don't believe this has any thing to do with the kit, this vehicle has all kinds of light sensors, darkness sensors, rain sensors.. etc. I believe it just too a min or 2 for the lights to actually come on.
by: Joe H08/31/2022
See my review on the Base Plate. The electric was a little wonky but my mechanic met with the manufacturer and was able to figure it out. That said, once it was resolved, it has worked flawlessly.
by: Janes01/10/2024
Easy instructions and works great!!!
by: James04/20/2022
Toyota Tacoma
I had a Toyota Tacoma that has separate blinker lights. Took a mechanic that was knowledgeable in electrical wiring. Followed the instructions and it worked perfect. Used it several times since
James J.
4/21/2023
Great. Been on several trips. No problem
by: Wayne05/17/2023
All running and signal lights work great. But no license plate light illumination.
Jenny N.
5/23/2023
You are correct in that the tow bar wiring harness part # RM-152-98146-7 will not illuminate the license plate light as the diodes are meant to keep the signals from backfeeding into your vehicle wiring. We have checked into this and having the license plate light is not mandatory when flat towing.
by: Bruce 10/04/2023
Easy to install. Would prefer a different method for securing the diodes. I used zip ties of good quality from Ty-Rap instead of the box store cheap imitations.
by: Tom F09/10/2023
2020 Jeep Wrangler
Very straightforward. I followed along to one of the videos on etrailer's site and it went very easy for me thank you etrailer!
by: Richard 02/23/2024
Works great.
by: Don 04/13/2023
Honda
Kit worked well. On 2012 Honda CRV I was able to run the wire to the rear under interior panels then install diodes inside each quarter panels eliminating any wiring or component connections exposed to the weather.
by: Beemerjohn12/27/2023
Wiring was about 8 feet short to complete the task.
by: Boyd10/03/2022
2003 Jeep TJ
1 star is simply for the fact that the straight cord is too short. Bought to use with a road master tow bar. Since I needed a drop hitch to line the tow bat up with the toad I needed about a foot more cable. Tried to make do with the one supplied. I ended up having to spend an hour in the parking lot of an rv store wiring up a new one on my first trip. You would think for [local stores] you have to pay for this they could spring for a little extra wite.
Katrina B.
10/17/2022
That is unfortunate that there was not enough wire for your application. We do carry 16 gauge bonded 4 wire, part # 16-4B-1, by the foot. You can always contact our customer service department for them to assist you in getting this wire ordered.
by: Edwin01/27/2023
It was the installation that was a issue, it works great now that I finally got it installed correctly. Had to go through 3 companies before it worked. It cost me 3 times as much, I went to a recommended installer from your site, and they hook it up but didn’t used the diodes that were provided. I took it back, and asked them to install the diodes.(the company “Fatal LLC”) charged me [XX] I kept getting feedback when the emergency lights were used, they say it’s normal for that to do that. I didn’t believe it, so I-took it to camping world, they rewired it and used a different diode don’t asked me why, but it-still didn’t work they said it would eventually work itself out, It didn’t, so I had still have the problem with the feedback when using the emergency flashers. I guess I’ll live with it. It works I guess….
by: Matt09/03/2022
I ordered base plates and the wire harness, the wire harness would not allow for brake, running, and turn signal lights, I had to omit one, the turn signals. The base plates where difficult, requires removing the front of the car. the video did not state the distance front to rear, I was a half inch to far forward and the fog light would not fit.
Jenny N.
9/20/2022
You mentioned that the harness would not allow for the brake, running and turn signal lights. For vehicles that have separate turn and brake lights, this kit will cause your brake lights to function as both brake and turn signal lights. This is perfectly fine. If you want to have both separate turn and brake signals, then you will need part # 118158 and part # RM-792 to do so.
by: Neal 04/08/2023
2023 Jeep Wrangler
Have not installed yet (DUO Brake system and wiring) from what I have seen I am impressed with all parts delivered.
tow bar Plate is more than substantial and the Tow bar is amazing.
25
251
Show More Reviews
See what our Experts say about this Roadmaster Tow Bar Wiring
- Complete Flat Towing Setup For A 2013 Jeep WranglerFor your 2013 Jeep Wrangler with a standard factory bumper, you can use the etrailer Invisible Base Plate Kit # e98949 for a baseplate, and the etrailer SD Non-Binding Tow Bar # e34ZR for a tow bar. This tow bar is compatible with the baseplate mentioned above, and has plenty of capacity to handle your jeep at 6,000-lbs. Additionally, if you're interested in a complete towing setup, you're also going to need: -A set of wiring, like the Roadmaster 4-Diode Universal Wiring Kit for Towed...
view full answer... - Parts Needed to Flat Tow 2019 Ford ExpeditionI have been reviewing the base plate kits made for 2019 Ford Expeditions. Each of them require trimming out the fascia where the tow hooks would have went, or to remove those tow hooks. I would not be surprised if a little extra trimming in that area was necessary. You will also need to mount the 6-pin connector up in the grill area. While a little trim here, scuffs from safety cables there, and a couple screw holes would probably go unnoticed by most, an experienced appraiser will probably...
view full answer... - Base Plate Kit for 2015 Kia Soul Manual for Flat TowingI recommend the Roadmaster # RM-522114-5 base plate We do not have an instructional video showing the installation of these baseplates. I have attached the installation instructions. Figures Q and V illustrate the areas requiring trimming. As with any base plate kit there will be some trimming. In this case it is an area around the honeycomb grill section. If you plan on flat towing these are the parts that you may need: 1. Base Plate Kit: Roadmaster # RM-522114-5 2. Two Bar: Roadmaster...
view full answer... - Parts to Flat Tow 2021 Jeep WranglerThe base plate kit can vary depending on the Jeep front bumper type. I am quoting parts based on the factory plastic bumper. If you have a factory steel bumper, Off road bumper with 3/4" D-rings or Off road bumper with 1" D-rings, just let me know so I can adjust the recommendation if necessary. For the base plate kit I would recommend the etrailer # e98948 Invisible Base Plate Kit with removable arms. I have attached a installation video for a 2020 Wrangler Unlimited to give you an idea...
view full answer... - Can Trailer Wiring of 2022 Chevy Equinox Work as Tow Bar WiringTrailer wiring can not be used as tow bar wiring as the converter does not allow the wiring to basically work in reverse. I wish it was the simple and convenient but tow bar wiring will have to be totally different from trailer wiring. What you'd want is a kit like the Roadmaster # RM-152-98146-7 which uses diodes to connect to your 2022 Chevy Equinox. I attached an install video for this kit on a similar 21' Equinox for you to check out as well.
view full answer... - Recommended Flat Tow Base Plate Kit For 2021 Jeep Gladiator MojaveFor your 2021 Jeep Gladiator Mojave I recommend the Roadmaster Direct-Connect Base Plate Kit - Removable Arms # RM77VR which will only require you to cut a slot in the skid plate on each side as shown in the included cut out from the instructions, but will not require you to modify the bumper. The # RM77VR will pair up perfectly with the Roadmaster Falcon All-Terrain # RM-522 which is a very popular tow bar due to its non-binding arms that allow you to quickly and easily unhook your flat...
view full answer...
- Recommended Flat Towing Parts for a 2022 Jeep GladiatorI can help you with a flat towing set up for your Gladiator but there are no wiring harnesses that will connect to your Jeep's tow plugs. You can use the Roadmaster Standard Magnetic Tow Lights item # RM-2120 but these will connect to the RV not your Jeep. I have linked an installation video below. To flat tow your 2022 Jeep Gladiator you will need the following parts: Tow Bar and Safety Chains - Roadmaster Falcon 2 Tow Bar item # RM-520 and item # RM-643 Base Plate Kit - Roadmaster...
view full answer... - Flat Tow Wiring for 2020 Hyundai PalisadeWhen using a car dolly, such as the Demco Kar Kaddy SS, # DM9713045, one generally uses the included lighting package for the indicator lights, plugging into the tow vehicles flat 4 plug or RV style 7-way. However, it is possible to use the same wiring harness for flat towing a vehicle instead, using vehicle indicator lights instead of the tow dolly's. Because they use the same tow vehicle/RV plug, it is one or the other. Since the 2020 Hyundai Palisade is not able to be flat towed, there...
view full answer... - Best Towing Mirrors for 2021 Chevrolet Tahoe High CountryThe towing mirrors that I recommend for your 2021 Chevrolet Tahoe High Country is the K-Source Universal Towing Mirrors - Clip On - Convex Mirror - Qty 2 # KS3891-2. The # KS3891-2 mirrors are adjustable to give you a snug fit that will reduce mirror vibrations.
view full answer... - D Ring Tow Bar Adapters And Flat Tow Setup For 2017 Jeep WranglerGreat question. The only adapter we have that will work with a Ready Brute is the Blue Ox Base Plate Adapter Brackets for Ready Brute Elite Tow Bars # BX88297. This adapter, will work with the tow bar but won't work with the D-rings. You would need a blue ox base plate. For me to get you the proper base plate I would need more information about your bumper and some pics of it. We have two sizes of D-ring adapters 1 inch and 3/4 inch. Two examples of this would be the Adapter for Jeep...
view full answer... - How To Flat-Tow Jeep Wrangler with Aftermarket Bumper and D-RingsThe Roadmaster Falcon All Terrain, Non-Binding Tow Bar part # RM-522 can be used on an aftermarket off-road bumper with d-rings if they are a certain size. For this, you'd need the Adapter for Jeep D-Ring Bumper Mounts part # RM-035 for 3/4" thick d-rings or part # RM-035-1 for 1" thick d-rings. Please note, you should also check with the manufacturer to make sure the bumper can be flat-towed with. In order to complete your setup I recommend the following: RoadMaster 76" Single Hook,...
view full answer... - All Parts Needed to Flat Tow 2016 Kia Soul With Manual TransmissionYes it can, and there are a number of parts needed in order to flat tow your 2016 Kia Soul with manual transmission, which I'll list for you to make it easy to order: - Base Plate Kit: Roadmaster Direct-Connect Base Plate Kit # RM-522114-5 - Tow Bar: Roadmaster Falcon All Terrain, Non-Binding Tow Bar # RM-522 - Roadmaster 64" Single Hook, Straight Safety Cables # RM-645 - Wiring Kit: Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles # RM-152-98146-7 - Supplemental Braking...
view full answer... - D-Ring Rugged Ridge XHD Bumper Flat Tow Set Up For 2013 Jeep JKWe have what you need. I will list them below for you. The Blue Ox Aftermarket Off-Road Bumper Adapter - 7/8" Pin # BX88357 for your 1 inch D-rings. The etrailer SD Non-Binding Tow Bar for Blue Ox Base Plates - RV Mount - 2" Hitch - 6,000 lbs # e47ZR. The Demco Stay-IN-Play DUO Supplemental Braking System w/ Wireless Coachlink Monitor - Proportional # DM86VR. The Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles - 7-Wire to 6-Wire Straight Cord # RM-152-98146-7. The Curt High-Low...
view full answer... - Flat Tow Set Up For 2022 Chevrolet Colorado ZR2Great question. I checked with RoadMaster and the Roadmaster Direct-Connect Base Plate Kit - Removable Arms Item # RM78VR is a fit for a 2022 Chevrolet Colorado ZR2 NON-Bison. If you have a Bison model you can use the Roadmaster Direct-Connect Base Plate Kit - Removable Arms # RM33VR. Either one you choose will work with roadmaster tow bars like Roadmaster Falcon All Terrain, Non-Binding Tow Bar - Motorhome Mount - 2" Hitch - 6,000 lbs # RM-522. You will need a braking system, I recommend...
view full answer... - When Using a 5-Way for Tow Bar Wiring Which Pin for a Charge Line KitThe # 20017 has a blue wire on it that wouldn't be used by the charge kit. Normally with 5 ways the fifth pin is for a reverse lockout but in your application it would be best to use it for charge line but due to it's smaller gauge it wouldn't be able to carry a significant charge.
view full answer... - Flat Tow Set Up For 2007 Mazda MX-5 That Does Not Need A Cross BarI have a solution for you. Roadmaster EZ Base Plate Kit - Removable Arms # 52728-1. Roadmaster Falcon All Terrain, Non-Binding Tow Bar - Motorhome Mount - 2" Hitch - 6,000 lbs # RM-522. These two units are not compatible with each other and you will need to get a crossbar style tow bar. If you are deadset on getting the falcon you can use the Replacement Quick Disconnect Crossbar Assembly for Roadmaster Motorhome Mounted Tow Bars # 910021-00. Roadmaster StowMaster Tow Bar - Car Mount...
view full answer...
- Recommended Replacement 7-Way Inlet for Vehicle Side Sure Juan, since these are all universal you can just use the RoadMaster 6-Wire Trailer Connector - Vehicle End # RM-910030-7 to replace your broken one.
view full answer... - Equipment Needed to Flat Tow 2021 Ford F-150 Raptor2021 F-150 4x4 models that have a neutral position in the transfer case are capable of being flat towed. You'll need base plates, a tow bar, safety cables, a flat towing wiring harness, a supplemental braking system and possibly a high/low adapter. For base plates, use the Demco tabless base plate, part # DM56MV. For a tow bar, I'd recommend the etrailer SD, part # e34ZR which is self centering and includes safety cables. For a wiring harness, the # RM-152-98146-7 diode system would...
view full answer... - Crossbar Style Base Plate For Flat Towing A 2011 Jeep Wrangler With Standard BumperWe have what you need. The Roadmaster Crossbar-Style Base Plate Kit - Removable Arms # RM-521448-4 will work with the etrailer XHD Non-Binding Tow Bar for Roadmaster Crossbar Base Plates - 2" RV Mount - 10,500 lbs # e64ZR. You will also need a few more items to complete the set up. I will list them out for you. You need the Demco Stay-IN-Play DUO Supplemental Braking System w/ Wireless Coachlink Monitor - Proportional # DM86VR. This will keep you safe and legal. You need to sync your...
view full answer... - Can 2008 Ford Edge Front Wheel Drive be Flat TowedI checked the owners manual of your 2008 Ford Edge and the front wheel drive versions can be flat towed. The Blue Ox base plate # BX2190 that you referenced is a fit for your vehicle and overall is the easiest to use so it's a really great choice. For a tow bar the Avail part # BX7420 is a really great choice that allows the tow vehicle to track well behind the vehicle and also is easy to use as well. For lighting we have the Roadmaster diode kit part # RM-152-98146-7 which comes with...
view full answer... - Parts Needed to Flat Tow a 2011 Nissan VersaA complete flat towing setup typically consists of base plates, a tow bar compatible with your base plates, safety cables, tow bar wiring, supplemental braking and a high/low adapter; it sounds like you already have a supplemental braking system but we can help you locate the other parts. Typically your base plates will dictate your tow bar, and you have 2 options for base plates in the Roadmaster # 52347-1 and the Blue Ox # BX1845. Both provide you with removable arms so that your vehicle...
view full answer... - Equipment Needed To Flat Tow 2021 Jeep Wrangler Behind Motorhome With Spartan Safe Haul SystemIt looks like you've got a good handle on what you need. The # SM99209 second vehicle Air Force One kit is what you'd need, because the Spartan Safe Haul provides everything necessary on the motorhome end of things but you'll also need the # SM6296 jumper kit to connect the air system on the coach to the Air Force One system on the Jeep. The Blue Ox # BX1139 works great on vehicles with the stock bumper with the plastic bumper cover and the # BX7420 Avail tow bar would be a good choice...
view full answer... - Complete Flat Towing Setup For A 2022 Ford Ranger With Roadmaster Base Plates & A Blue Ox Tow BarIt's up to you entirely however, it's much easier to just use the adapter # RO64FR so you can use your Blue Ox Alpha 2 Non-Binding Tow Bar # BX7380 with your Roadmaster Direct-Connect Base Plate Kit # RM-524459-5. If you don't want to use an adapter, you can use the Blue Ox Base Plate Kit # BLU77XR which will connect directly to your Blue Ox # BX7380 tow bars. Finally, if you need a complete setup as well, you'll also need: - A braking system # RM-9060, with a brake light relay # RM-88400,...
view full answer... - Parts Needed to Flat Tow a 2020 Lincoln MKZ Hybrid w/ Adaptive Cruise ControlI can definitely help you out with that. In addition to the tow bar, brakes and lights, you will also need a base plate kit and safety cables. I have listed these parts out for you below, along with a brief description of their purpose. Base Plate Kit: This is a custom fit part that provides the attachment point for the tow bar on your MKZ Hybrid. - Blue Ox Base Plate Kit # BX2674 Tow Bar: This is what will come from the motor home and attach to the base plate kit. - Blue Ox Alpha 2...
view full answer...
Do you have a question about this Tow Bar Wiring?
Info for this part was:
Test Fit:
Joe V
Test Fit:
Randy B
Test Fit:
Brent H
Test Fit:
Robert C
Test Fit:
Conner L
Test Fit:
David F
Test Fit:
Ryan G
Test Fit:
Clayton O
Test Fit:
Bradley B
Test Fit:
John A
Expert Research:
Mike L
Expert Research:
Jameson C
Video by:
Zack K
Video by:
Kathleen M
Video by:
Shane H
Video by:
Michael B
Video by:
Jacob H
Video by:
Aidan B
Video by:
Thomas T
Video by:
Rick G
Edited by:
Lindsey S
Installed by:
Jeff D
Video Edited:
Joshua S
Video Edited:
Jacob T
Video Edited:
Dustin K
Video Edited:
Chris R
Video Edited:
Zach D
Video Edited:
Jonathan Y
Video Edited:
John S
Written by:
Shelly K
Updated by:
Hannah L
Updated by:
Isabelle B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
James
3/3/2023
no issues after 10K miles super happy with this product