Roadmaster Tail Light Wiring Kit for Towed Vehicles - LED Bulb and Socket - Red
Item # RM-152-LED
Our Price: $102.59
Confirmed to Fit
2003 Nissan Frontier
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
This item qualifies for Free Shipping
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (67)
- Q & A (0)
- Photos
2003 Nissan Frontier - Roadmaster Tail Light Wiring Kit for Towed Vehicles - LED Bulb and Socket - Red
- Bulb and Socket Kit
- Bypasses Vehicle Wiring
- Tail Light Mount
- Universal
- Roadmaster
Get the signal lights needed for towing without tapping into your towed car's electrical system. Bright LEDs mount inside your Nissan Frontier's tail light housings, and wiring runs beneath your car for a seamless appearance. 450 Lumens per bulb.
Features:
- Tail light kit gives you brake, running and turn signal lights for your towed vehicle without tapping into its wiring
- Bypasses towed car's electrical system completely - wiring is routed beneath the car
- Eliminates concerns of violating the vehicle manufacturer's warranty
- LED lights last longer, burn brighter, and activate faster than incandescent lights
- Red diodes ensure that tail lights show red, not pink
- LEDs generate little heat - no risk of melting lenses
- Independent bulbs and sockets mount inside your tail lights
- Take up less space in tail lights than incandescent bulbs
- Require a 1" hole drilled in tail light housing
- Necessary wiring, 2 bulbs, 2 sockets, zip-ties, and instructions included
- Plug and extension loop for hookup to RV sold separately
- Made in the USA
Specs:
- Wiring harness length: 27'
- Light output per bulb: 450 lumens
- Overall length of bulb: 2-1/2"
- Length of bulb from flange to top of bulb: 2"
- Wire loom:
- Length: 3'
- Diameter: 1/2"
- Limited Lifetime Warranty
Note: Each tail light housing on towed car must have enough room for extra bulb and socket.
152-LED Road Master Tail Light Wiring Kit for Towed Nissan Frontiers - LED Bulb and Socket
Installation Details
Customer Satisfaction Score:
90% were satisfied with this product
10% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- Alternate product found
Customer Reviews
Roadmaster Tail Light Wiring Kit for Towed Vehicles - LED Bulb and Socket - Red - RM-152-LED
Average Customer Rating: 4.8 out of 5 stars (67 Customer Reviews)
Get the signal lights needed for towing without tapping into your towed car's electrical system. Bright LEDs mount inside your vehicle's tail light housings, and wiring runs beneath your car for a seamless appearance. 450 Lumens per bulb.by: DIY Bill09/05/2022
1997 Nissan Pickup
This kit did the job very well. I could have bought each part separately and saved some money, but I went with the comfort knowing all these parts will work together to accomplish the job. I couldn't figure what LED bulb to use for both brake and turn signal. I routed the wire along the truck wiring harness for half the way to the front, then slipped it into the frame channel for the rest of the way. I used a Curt heavy, round 4 pin plug at the front grill. It was a bit of work and took many hours but came out clean!
by: Mark06/09/2023
I installed this on our 2019 Equinox towed. Love the convenience of just plugging in the towed vehicle. The most difficult part was deciding on what part of the light housing to drill the hole for the light socket.
by: Thomas06/29/2022
Loved the product, easy to install and have showed off many times while we wintered in Texas. I would have loved to take the credit for idea but was happy to let them know where I bought from.
Thomas
6/30/2023
No issues. Still looking like it’s newly installed
by: SteveW07/24/2022
Great product. Bulbs were a bit bigger than I had expected but they worked fine.
Stevew
7/24/2023
We had one bulb quit working after a few weeks. I called Roadmaster after diagnosing it and since it was so soon after install they sent a replacement. We were on the road when I noticed it failed I stuck an old 1157 bulb in so I was legal. Being a retired mechanic, I know that a certain percentage of new parts are defective and what makes the difference is how the comapny stands behind their products. I couldnt be more impressed with both eTrailer and Roadmaster. It was also nice that the temporary fix so I could continue my trip was easy and inexpensive. After replacing the bulb the upgrade has continued to work without a problem.
by: NormB02/28/2021
2008 Jeep Liberty
I wanted a tail light system that would operate off of my motorhome, but didn't tie into my towed vehicles wiring. This kit did the trick! Led bulbs are super bright! Kit has everything you need for a smooth install.
Normb
2/28/2022
Still working great. Nice bright lights
by: Harry F12/28/2019
Kia
I have had these lights installed for over a year. I tow a Kia Nero on a tow dolly with my motorhome. Even though the dolly has tail lights, I wanted my car to have tail and brake lights as well. I installed these lights inside the Kia taillight assembly and spliced them into the dolly wiring harness. The lights work great, very bright. The hardest part was figuring out how to install them inside the taillight assembly since they were not made for the Nero. There was no Nero kit available.
by: Gil09/17/2021
The kit should have come with a means to land the wires at the front of the 'toad'. A male connector at the very least.
I should have done more research as the same kit is available in several places for $[XX] as compared to the $[XXX]charged by etrailer.
Brooke M.
9/29/2021
Thank you for leaving a review and for bringing this to our attention. Here is a link to our lowest price pledge. Our customer service team should be reaching out to you in the near future.
Helpful Links
by: Martin 08/24/2022
GMC Yukon
Easy install just like the tutorial video showed!
I used a step drill from Harbor freight. Allow the bit to do the cutting and it didn't crack my housing.
The hardest part was deciding how to route my cables. Came with enough wire to mount in my GMC Yukon.
by: Dennis09/12/2019
I bought this item from etrailer and they installed it free at their business. It has worked well. Altho, only one problem. I hooked up today to the motor home, and the turn signal portion on the right side did not work. I am sure it is only a wiring problem. Plan to check it soon. But, would still buy it again. etrailer is a great group of people to work with.
by: Doug H.07/27/2017
2014 GMC Sierra
Installed LED tail light wiring kit (Brake, Tail & Signal) in 2014 GMC Sierra taillights. For towing behind motor home. LED lights are brighter than incandescent. Installation instructions easy to follow.
by: Dan S04/04/2019
Great kit. Had to route the wiring in a protective location. Drilling the housing was easy. Good product. Installed a yr ago. No issues. Would buy again.
Dan S.
4/5/2020
Sweet trouble free kit, Wiring too short for a long bed pickup. Soldered and added a 3 extension & works great. Troublefree.
by: Barry12/22/2019
2019 GMC Canyon
I purchased this taillight option because didn't want to go to the expense of the wiring kit with the diodes, etc. Since I have to disconnect the battery in this vehicle for towing, I needed to use the power from the motorhome trailer plug. I followed the directions and video and the kit was installed as they depicted and it works great. The LED lights are very bright and light up the top half of the taillight assemble which is more than ample.
by: Richard06/17/2021
The roadmaster tail light kit is an easy DIY kit that comes with all I needed for install on 2012 Chev Colorado . The hardest part was trying to crawl under the truck to run the wires. The lights are seperate from the Colorado and are very bright.
by: Jim 01/01/2020
These lights are BRIGHT! Easy install. I needed about 10 more feet of 4-strand wire, however. Ended up having to splice some together.
Jim H.
1/2/2021
Tail light LED sockets are bright but leak water and condensation in my tail light assembly.
by: Bob 09/30/2021
Very happy with the with the LED Bulb and socket set. A great install job by etrailer, and without messing with the towed vehicles wiring system. Wish this had been around years ago! Stellar,a five star product
by: Mark09/10/2021
2009 Honda CR-V
Not enough wiring! I am about 3 feet short with the brown and white wires. Now I have to stop, go and buy more wire to finish the job. This is on a Honda CRV.
Brooke M.
9/20/2021
Thank you for the review and for bringing this to our attention. Our customer service team should be reaching out to you in the near future.
by: Alam11/13/2018
2005 Mini Cooper
I bought separate LED lights for the brakes light and turn signals of the towed car. I also have a braking system attached to the car that will press on the brake of the car. Question - will the car brake light and the led brake light both come on at the same time and is this a problem.?
Thanks for your help
by: Max Whitt01/27/2017
2014 GMC Sierra
Installation was straight forward, and in my situation easy. I have used every system on the market and this system is by far the best if it will fit in your lens. I installed it on a 2014 GMC Sierra which requires the ground cable to be removed when towing, so in my case grounding to the truck was useless - just use the ground from the tow vehicle. Also a 7/8 hole saw works better than the 1" that is called far.
by: Micheal09/18/2018
2018 Chevrolet Malibu
This product had a great etrailer installation video specifically for my car. the only problem was that there was not enough wire! I had to go to O'Reilly's to buy more wire.
by: Douglas05/17/2022
looks well made will try to install it tommorrow, I like the LED bulbs =, only wish Roadmaster would have included a 4 pole pagtail to plug the finished install into my motorhome. I will need to visit a autp parts store tommorrow for that piece.
by: Gary06/06/2022
So glad I got this kit! Running the wires from front to back was the hardest part. I really liked not splicing into my existing factory lighting wiring.
by: David04/25/2018
1989 Jeep Cherokee
Easy to install and no exposed wiring. Make sure you have room in the back of your tail lights for the socket assembly - I should have checked first because I had not a lot of room to work with but in the end they fit just fine.
by: Peggy08/09/2018
2018 Chevrolet Spark
I have always had great customer service with etrailer. Spent a lot of money. I bought the complete towing package for my 2018 Chevy Spark. Everything looks great.
by: Douglas 10/27/2021
Chevrolet Spark
Wired a 2021 Chevrolet Spark. Good videos availability for help with installation. Several possible methods to route wire from front to back.
by: Otis 10/30/2021
As always the service and delivery was what we have received from the first order years ago up to the latest.
Pricing has always been right, why would we look any other place than ETrailer.
Thanks
25
67
Show More Reviews
See what our Experts say about this Roadmaster Tow Bar Wiring
- Tow Bar Lighting Kit Recommendation for 2006 Saturn VueWe checked with Roadmaster and the LED bulb and socket kit you like part # RM-152-LED is a confirmed fit and will work great! We actually had the chance to install this kit on a similar 2007 Saturn Vue that I attached an install video that covers.
view full answer... - Parts Needed to Flat Tow a 2018 Chevy Spark Behind a MotorhomeAll of the base plates from other manufacturers, Roadmaster and Blue Ox, carry forward from the 2017 to the 2018 Chevy Spark so we can glean from that information that the Demco base plates # DM9519326 will also fit. Please note this fit is for models with a manual transmission and without active air shutters. For a compatible tow bar I recommend the Commander # DM9511012. This is a non-binding tow bar which means that you won't have to be perfectly straight or level to hook up or unhook...
view full answer... - Do I Need A Brake Lite Relay and Stop Light Switch To Use Roadmaster 9700 System In 2015 GMC TerrainA Brake lite switch relay part # RM-88400 is not required when using the Roadmaster Portable Supplemental Braking System - Preset part # RM-9400 on the 2015 GMC Terrain. However, a Roadmaster Stop Light Switch Kit - Chevrolet Equinox / GMC Terrain part # RM-751439 is required which works the same as the brake lite relay but both are not needed according to the installation instructions of the 9700 braking system. The 9700 braking system also requires an additional 12 Volt outlet kit part...
view full answer... - Parts Needed for Roadmaster Invisibrake and Tail Light Wiring Kit for a 2016 Chevrolet SonicYou need to have a diode kit installed regardless of which braking system you are using, this is what lets you connect your RV's tail, brake, and turn signal lights to your towed car's lighting system so that your brake lights and turn signals illuminate. This is a requirement for flat towing. You can use the Roadmaster Tail Light Wiring Kit for Towed Vehicles # RM-152-LED to accomplish this. You will also want the Roadmaster FuseMaster Fuse Bypass # RM76511 which replaces your Chevrolet...
view full answer... - Availability of Roadmaster Tow Bar Lighting Kit for 2022 Jeep Cherokee TrailhawkRoadmaster has diode style tow bar lighting kits that fit your 2022 Jeep Cherokee Trailhawk like with the part # RM63MR but they do not list any of their bulb and socket kits as a fit due to space constraints in the housing of the light assemblies.
view full answer... - Roadmaster or Blue Ox and Parts Needed to Flat Tow a 2019 Chevrolet Spark Manual TransmissionBoth Roadmaster and Blue Ox are great systems that are made in the USA and you can't go wrong with either option. That being said, I would give the slight edge to Roadmaster due to the limited lifetime warranty on their products. I have included the parts you would need to flat tow your 2019 Chevrolet Spark Manual Transmission (w/o ACTIV) below. Base Plate Kit: Roadmaster Direct-Connect Base Plate Kit # RM-523202-5 Tow Bar: Roadmaster Nighthawk All Terrain, Non-Binding Tow Bar # RM-676...
view full answer... - Parts Needed to Flat Tow a 2020 Chevrolet Sonic HatchbackYes, According to the owners manual for your 2020 Chevrolet Sonic Hatchback you can flat tow your Sonic with automatic transmission. I have included a list of the parts you will need, as well as a recommendation for each part. You will want to make sure you consult the owners manual for your Sonic to be sure you complete any requirements/recommendations from the manufacturer before towing your Sonic. Base Plate Kit: This Provides the attachment point for the tow bar coming from your RV....
view full answer... - Best Bulb and Socket Kit for Flat Towing 2018 Chevrolet EquinoxI do have an opinion for you but the RoadMaster Bulb and Socket Set part # RM-155-2 is not a confirmed fit for you 2018 Chevrolet Equinox. For a bulb and socket kit that will work with your vehicle, I recommend using the Roadmaster Tail Light Wiring Kit with Bulbs part # RM-155 for incandescent or part # RM-152-LED for LED. As long as you do not have the Premier edition then either of these kits will work well for you In order to install either kit you can also going to need a silicone...
view full answer... - Available Tow Bar Wiring Kits for 2015 Chevrolet TraverseHopkins Custom Tail Light Wiring Kit for Towed Vehicles item # HM56106 fits the Chevy Traverse for model years 2009 through 2012. It does not fit your 2015 model year but the flat towing wiring kit options for your 2015 Traverse are shown on the linked page. These include bulb-and socket kits like # RM-152-LED, hardwired diode kits like # RM-15267 and magnetic light kits such as # TL21RK. The included article on tow bar wiring will give you the details on each type to help you decide...
view full answer... - Flat Towing Wiring Kit for 2019 Chevrolet EquinoxIf you have the 2019 Chevrolet Equinox Premier you can use Roadmaster diode wiring kit # RM-15267 along with 6-pole plug # RM-910030-8 that you will install in place of the included 7-way. An article on wiring is linked to assist you with this process. If you do not have the Premier you'll instead need one of the kits shown on the linked page, such as magnetic light kit # TL21RK or bulb and socket kit # RM-152-LED.
view full answer... - Tow Bar Wiring Options for a 2005 Ford Explorer Sport TracThere are a few different options of wiring that you can use for the lights when flat towing your 2005 Ford Explorer Sport Trac. The Roadmaster Tail Light Wiring Kit # RM-152-LED is a great option that remains permanently installed on your vehicle but it does require you to drill 1" holes in your tail light housing. If you go this route then you also need to install the Brake-Lite Relay Kit # RM-88400. For a less invasive lighting kit you can use the Optronics Magnetic Tow Lights # TL21RK....
view full answer... - Recommended Flat Tow Wiring Harness for 2019 Equinox PremierThe Roadmaster Tail Light Wiring Kit for Towed Vehicles - LED Bulb and Socket - Red # RM-152-LED excludes the premier model. The bulb and socket kits are not recommended for your vehicle because there simply isn't room in that particular assembly for the 1 inch hole required according to my tech contact at Roadmaster. Instead I recommend the diode kit # RM-154 or Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit # RM-15267 which is my preference and will allow you to add the charge...
view full answer... - Does SMI DUO Supplemental Braking System Require Anything Else to Function on 2017 Chevy SonicThe SMI DUO # SM99251 is a confirmed fit for your 2017 Chevy Sonic and will easily allow all of your vehicle taillights to continue functioning like normal. No other parts are needed. We had the chance to install this kit on a similar 2014 Chevy Sonic which I attached a link to the install video for you to check out. When flat towing the vehicle you will need a lighting kit though so that the tow vehicle can control the vehicle taillights. For that the Roadmaster LED bulb and socket kit...
view full answer... - Flat Towing Base Plates for a 2010 Mini Cooper S HartopI reached out to Blue Ox and there is not a confirmed fit for your 2010 Mini Cooper S Hardtop, but I do have a solution for you. I recommend the Roadmaster EZ Base Plate Kit - Removable Arms # 521877-1 which is confirmed to fit your Model S Hardtop. Then I recommend the Roadmaster Falcon 2 # RM-520 for your tow bar and # RM-643 for your safety cables. You can use the plugs # RM-210 when not in use if desired. For your wiring, I recommend the Roadmaster LED Bulb and Socket Kit # RM-152-LED....
view full answer... - Does the Demco Tabless Base Plate Kit Fit the 2013 Honda FitYes, the Demco kit # DM9519236 does fit on your 2013 Honda Fit. The Demco Commander Tow Bar # DM9511012 is compatible with the base plates. In addition to the tow bar, you will need lighting, and supplemental braking. For lighting, you can use the bulb and socket kit, # RM-152-LED with the connector adapter # DM9523004. The good thing about this kit is that you will not have to cut and splice into the vehicle wiring. You also need to pull a fuse in the Fit. Use the FuseMaster buypass...
view full answer... - Is There An Installation Video of the Roadmaster Bulb and Socket Kit on a 2017 Ford F-350At this time we do not currently have a video of the installation process of the Roadmaster # RM-152-LED kit on a 2017 Ford F-350, but as soon as we do get an opportunity to make one we will certainly be looking to take advantage. To install a Roadmaster Bulb kit like the # RM-152-LED you'll need to remove the tail light housing on your vehicle and just choose the best spot for a 1" hole to be drilled without interfering with any of the other lights or wiring components. You could potentially...
view full answer... - Bulb and Socket Kit for Flat Towing that Uses LED BulbsThere is an LED bulb and socket that you can use for flat towing. It is # RM-152-LED. The LEDs are red which work better than white lights if behind a red lens. I have linked a video showing an example installation for you.
view full answer... - Why Won't the Bulb and Socket Tail Light Kit Work On a 2018 Chevy Equinox PremierThe bulb and socket tail light flat-tow wiring harness kits like the Roadmaster Tail Light Wiring Kit for Towed Vehicles part # RM-152-LED will not work on a 2018 Chevrolet Equinox Premier because there isn't space inside the housing to mount the bulb and socket because of the LEDs. Therefore, the best option would be a diode kit like the Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit part # RM-15267 which are much less invasive anyhow. There will be no additional resistors required...
view full answer... - Is LED Bulb And Socket Kit Compatible With Demco SBS Stay-IN-Play DUO Supplemental Braking SystemYes, the Stay-IN-Play DUO is indeed compatible with the Roadmaster Tail Light Wiring Kit for Towed Vehicles - LED Bulb and Socket # RM-152-LED. This kit will work with either the Demco SBS Stay-IN-Play DUO Supplemental Braking System # SM99251 or # DM86VR. The difference between the two being that the # DM86VR comes with a wireless monitor which tells you when the brakes are being applied.
view full answer... - Can the LED Bulb and Socket Kit # BX88267 be Installed on a 2009 Subaru Forester for Flat TowingWe do have an LED wiring kit just like the Kit # BX8869 that you referenced. It is found as part # BX88267 on our site. You can use the LED kit if your 2009 Subaru Forester does not have LED tail lights and if each tail light housing has enough room for an extra bulb and socket. It could be that there is no room for an extra bulb and socket which would be why the Roadmaster Kit # RM-152-LED isn't confirmed to fit. If you do have LED tail lights (or you don't have enough room for an extra...
view full answer... - Are Flat Towing Parts for 2016 Chevy Equinox the Same as 2019 Chevy EquinoxThe parts to flat tow a 2016 Chevy Equinox and 2019 Chevy Equinox are different because the vehicle underwent a style change but if you are looking to flat tow both I'll give you what you need for each, starting with a 2019 Chevy Equinox: - Base Plate Kit: Demco Tabless Base Plate Kit # DM9519332 - Tow Bar: Demco Excali-Bar III Non-Binding Tow Bar # DM9511013 - Wiring Kit: Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit # RM-15267 (if the Equinox is a Premier model) OR Roadmaster...
view full answer... - Best Flat Tow Wiring Harness for a 2010 Honda FitIn regards to the Tow Ready Tail Light Isolating Diode System part # TR118821 and the Roadmaster Universal Hy-Power Diode Wiring Kit part # RM-154, the Tow Ready kit will be easier to install as more of the wiring connections are already made for you but the Roadmaster kit takes up less space because the diodes are physically smaller. That is really the only difference between them. In regards to the Roadmaster Tail Light Wiring Kit for Towed Vehicles part # RM-152-LED, there will be...
view full answer... - Recommended Flat Tow Wiring Kit For A 2019 Jeep Grand Cherokee The 2019 Jeep Grand Cherokee is not compatible with bulb and socket kits from Roadmaster like the # RM-152-LED that you referenced. Bulb and socket kits will actually cause much more harm since you'd have to drill into the tail light housing and run the risk of damaging the light and will typically also face issues with water leaking into the taillight through the hole the bulb and socket kit uses. You'd be much better off just using a splice in kit like the Roadmaster Diode 7-Wire to...
view full answer... - Will Roadmaster Sterling Tow Bar Work With Roadmaster Direct-Connect Base Plate On 2020 EquinoxThe Roadmaster Direct-Connect Base Plate Kit # RM-523193-5 you mentioned will work great with the Roadmaster Sterling All Terrain # RM-576 you are interested in with the included pin and clips. You will need to add the RoadMaster 76" Single Hook # RM-645-76 as the included EZ safety cables will not work with the Roadmaster # RM-523193-5 baseplate. To complete your flat tow setup you will also need lighting, and a supplemental brake system. Wiring Kit - Roadmaster Tail Light Wiring Kit...
view full answer...
Do you have a question about this Tow Bar Wiring?
Info for this part was:
Test Fit:
Joe V
Test Fit:
Randy B
Test Fit:
Andrew S
Test Fit:
Brent H
Test Fit:
Shane H
Test Fit:
Robert C
Test Fit:
David F
Test Fit:
Ryan G
Video Edited:
Zack K
Video Edited:
Joshua S
Video Edited:
Jacob T
Video Edited:
Dustin K
Video Edited:
Chris R
Video Edited:
Zach D
Video by:
Andrew K
Video by:
Kathleen M
Video by:
Jonathan Y
Video by:
Michael B
Edited by:
Lindsey S
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Installed by:
Cole B
Written by:
Shelly K
Updated by:
Hannah L
Updated by:
Matthew E
Updated by:
Isabelle B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Diy B.
9/6/2023
We took the toad on a 4200 mile trip out West and back. The lights worked perfectly and look nice and bright too!