Magnetic Tow Lights - Red LEDs - 4-Way Flat Connectors - 20' Long Harness
Item # PE26UR
Our Price: $104.14
Confirmed to Fit
2001 Chrysler Town and Country
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
This item qualifies for Free Shipping
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (15)
- Q & A (0)
- Photos
2001 Chrysler Town and Country - Magnetic Tow Lights - Red LEDs - 4-Way Flat Connectors - 20' Long Harness
- Removable Tail Light Kit
- Bypasses Vehicle Wiring
- Magnetic Mount
- Universal
- Peterson
Great for either your trailer or towed Chrysler Town and Country, these magnetic lights ensure that you have emergency flashers and the signal lights required for towing without having to tap into existing wiring. Long-lasting LEDs offer superior operation.
Features:
- Tow lights supply trailer or towed car with lights required for towing
- Red lights act as running lights, brake lights and turn signals
- LumenX optics creates a solid panel of light that illuminates the entire lens
- No need to wire your trailer or tap into existing wiring on your towed car
- Magnetic bases on lights hold firmly to any metal surface - 35 lbs pull force
- Wiring harness runs beneath trailer or towed car
- Long-lasting LEDs provide superior operation
- Faster activation, increased brightness, less power draw and greater durability when compared with incandescent lights
- 4-Way flat plugs included
Specs:
- Light diameter: 4"
- Wiring harness length: 20'
- Operating range: 8V - 16V
- Limited lifetime warranty
V955 Peterson Magnetic Auxiliary Tow Lights - Red LEDs - 4-Way Flat Connectors - 20' Long Harness
Compare to Tow Ready 73864
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
- Wrong item was ordered
Customer Reviews
Magnetic Tow Lights - Red LEDs - 4-Way Flat Connectors - 20' Long Harness - PE26UR
Average Customer Rating: 4.7 out of 5 stars (15 Customer Reviews)
Great for either your trailer or towed vehicle, these magnetic lights ensure that you have emergency flashers and the signal lights required for towing without having to tap into existing wiring. Long-lasting LEDs offer superior operation.by: Jimmy03/10/2022
Great service as always. Products were as advertised.etrailer is my go to place for trailer supplies.
by: Gerard10/31/2021
2014 Thor ACE Motorhome
The jury is out on these lights. They seem quite bright and well made, but the first set, identical to this one, had a magnet let go on its first trip, the light fell off and eventually broke the wiring, shorting out my trailer light converter, all of which I discovered when I reached my destination and found a wire dragging behind the trailer and no light to be found. It was not comforting to know that I had been driving at night with no lights at all on the trailer.
Sierra K.
11/2/2021
Sorry to hear about that. The manufacturer provides a lifetime warranty on these lights so Customer Service will contact you and discuss how to go through with that.
by: Rob 09/21/2020
Ram 3500
Works well so far. Plenty of cable left over. Used on a F250 while pulling a 3500 compressor trailor.
by: Dale 03/27/2021
I'm very happy with the product and xeverice from e trailer
by: Peter 10/01/2021
Good info on web site and tech support. Arrived when said it would
by: Matt Dial / Bob05/31/2020
Seems ok but haven't used them.
by: Peter 07/01/2021
by: James B07/15/2023
2011 Ram 3500
by: Dennis 09/28/2021
by: Gary 03/26/2021
1995 Jeep Wrangler
by: Jesse 03/22/2021
by: John 12/02/2022
2017 Acura MDX
by: Ronnie 03/13/2021
by: Andrew 07/20/2022
by: John 05/06/2021
15
15
See what our Experts say about this Peterson Tow Bar Wiring
- Will Magnetic Tow Lights Work With Chrysler Town And Country MinivanThe Peterson Magnetic Tow Lights, part # PE26UR are led lights and have a 20 ft long cord that has a 4-way trailer connector. These lights are designed to work with any towed vehicle, and you use the magnetic bases to attach these lights.
view full answer... - Could Tow Bar Lights be Used on Tow DollyIf you wanted to use the Peterson Tow Light Kit # PE26UR on a tow dolly you certainly could as they would cover the basic taillight functions, but they were intended to be closed in the trunk or hatch of a vehicle. This light kit is magnetic, so it securely attaches to any metal surface with strong magnets. You could also look at another magnetic light kit like part # TL21RK.
view full answer... - Does Battery Need To Be Disconnected When Flat Towing A 2011 Ford Fiesta AutomaticIt is recommended to disconnect the battery on your 2011 Ford Fiesta automatic when it is being flat towed. Your vehicle has a feature that will not allow the battery to be discharged while it is being towed, so you should not have to go through the whole procedure you mentioned to reset the vehicles presets. To keep a maintenance charge on the battery I recommend using a harness such as # BX88206 with the tow bar wiring you will be using so that you can run a wire from the connector at...
view full answer... - Parts Needed to Flat Tow a 2007 Honda Fit Behind a Motor HomeFirst, be sure to consult the Fit owners manual to determine if and how your Fit should be towed. Yes there are base plates for the 2007 Honda Fit from Blue Ox but only if it is a manual transmission. You would use # BX2252. For a compatible tow bar I recommend the Avail # BX7420. It also comes with safety cables. For a lighting solution I recommend the Roadmaster wiring harness # 154-792-118158. Most states now require a supplemental baring system on the vehicle being flat towed. I...
view full answer... - How To Use 7 Way RV Connector To Power Lights And Charge Battery On Towed VehicleI highly recommend installing Hopkins Endurance Multi-Tow Adapter # HM48470. This replaces your RV's 7 way and gives you a 7 way AND 4 way flat connection. Then you can hook upMagnetic Tow Lights - Red LEDs - 4-Way Flat Connectors - 20' Long Harness # PE26UR directly to the 4 way flat provided on the adapter. These tow lights have a 20 foot long wiring harness; use 48" Long 4-Pole # HM47115 if you need 4 more feet of wiring. For the charge line going to the towed vehicle's battery, you...
view full answer...
- Can Magnetic Tow Lights Be Placed On The Cab Of A 2019 Chevy Colorado When Flat TowingYes, as long as the Magnetic Tow Lights - Red LEDs - 4-Way Flat Connectors - 20' Long Harness # PE26UR are visible to other drivers behind you then you can place them at the rear-most position of the cab of your 2019 Chevy Colorado.
view full answer... - Does Tow Dolly Lighting Need to be Used if Towed Vehicle has Tow Bar LightingIf the vehicle on the tow dolly has a set of tow lights like the # PE26UR that you referenced, and they are clearly visible you could run just them and not also the dolly lights. It's not required that you run both as long as one set is clearly able to be seen.
view full answer... - Recommended Flat Towing Equipment For A 1994 Geo TrackerThe Roadmaster Crossbar-Style Base Plate Kit - Fixed Arms Item # 118-1 is a confirmed fitting base plate for your 1994 Geo Tracker and to attach it to your Reese tow bar you'll need the Roadmaster Tow Bar Adapter # RM-025. To flat tow you'll also need a braking system, tow bar wiring, and safety cables. I have the following recommendations for you below: Braking System: Brake Buddy Select 3 Portable Supplemental Braking System - Proportional Item # HM39524. This system provides intense,...
view full answer... - Magnetic Tow Light Kit that Uses 7-Way Connection to Tow Vehicle For a magnetic tow light kit that would use a 7-way you'd want the Peterson kit part # PE26UR with the 7-way adapter # HM47365 which you'd plug into the 4-way of the light kit which would then plug into the 7-way of your tow vehicle.
view full answer... - Solution for Powering Taillights on 2012 Mazda 6 On Tow DollyI would start here by checking to see if your tow dolly has lights. More than likely it does, and you can plug the 4-way on the dolly into the 4-way on your motorhome. This would take care of your light problem. You will not be able to plug the 4-way on your 2012 Mazda 6 into the 4-way on your motorhome to power the lights. If your tow dolly does not have lights, I recommend using magnet lights like the Magnetic Tow Lights - Red LEDs - 4-Way Flat Connectors - 20' Long Harness # PE26UR....
view full answer... - Can a 2013 Honda Fit be Flat Towed Behind a MotorhomeI have a copy of the 2013 Honda Fit Owners Manual that I found online, and it states that both manual and automatic transmission equipped Fit models can indeed be towed behind a motorhome IF the specific procedures shown are followed. You can find this information by checking your manual. Be sure to read the instructions carefully and completely, as they're pretty specific and if they aren't followed to the letter, you can damage the drivetrain of your Fit. I looked through several online...
view full answer... - Can a 2011 Ford Fiesta Automatic be Flat Towed Behind a Motor HomeI did some checking and it looks like a 2011 Ford Fiesta with an automatic transmission is good to tow as is. However, you should check with the owners manual to check for any limitations or recommendations. You will need a few things to accomplish this, the first thing being a Roadmaster EZ2 Base Plate Kit, part # 524425-1. This will install onto your Fiesta and be the attachment point from the tow bars. Next, you will need a RoadMaster Sterling All Terrain Tow Bar, part # RM-576 and...
view full answer... - Parts Needed to Flat Tow 2016 Jeep Wrangler UnlimitedWe can help you select the required components to allow you to safely and legally flat tow your 2016 Jeep Wrangler Unlimited behind your RV. You may care to check out the articles I have linked for you which cover the essentials of flat towing. Parts needed include base plates, safety cables, a tow bar, a braking system, a lighting/wiring kit, a high/low hitch adapter and a wiring extension for easier RV hookup. Base plate selection for your Wrangler Unlimited depends on how it is equipped....
view full answer... - Base Plates and Accessories to Flat Tow 1991 Mazda Miata with Pace Arrow 37CAssuming that you're using a Blue Ox tow bar, the parts you've mentioned would all be compatible. The # PE26UR lighting system would work well for your application. You'd also need safety cables like part # RM-645 if you don't have them already. Most states also require that the flat towed vehicle be equipped with a supplemental braking system, like theBlue Ox Patriot 3 # BLU37TR. I'll link you to some articles about flat towing that you might find helpful.
view full answer... - Lighting Functions and Extension Cable for the Peterson Tow Light KitThe Magnetic Tow Lights - Red LEDs - 4-Way Flat Connectors - 20' Long Harness Item # PE26UR, provides stop, turn and taillight functions for flat towing. If you need an extension There are several options depending on the length that you need. If 48 inches would be long enough you can use the 48-inch Car and Trailer End Loop, # 18044. If 60 inches is needed use the 60-inch Car and Trailer End Loop, # 18045. If you need a custom length wire you could purchase a 4-Pole Trailer End Connector,...
view full answer... - How to Route Tow Bar Wiring to Rear of 2019 Kia SoulWhen installing a wiring kit like the Roadmaster Diode Flexo-Coil # RM-15267 on your 2019 Kia Soul the best way to run the wires to the rear tail lights is to route them under the vehicle between the underbody covers, securing it at various locations with zip ties while being sure to avoid any moving parts or areas that emit a lot of heat. I have attached an install video for this particular kit on the 2015 Kia Soul that you can follow along with. If you'd rather not perform this kind...
view full answer... - Where can I attach the Peterson Light KitI went to the warehouse and pulled the Peterson Tow Light Kit, # PE26UR. It can be placed anywhere that there is metal. It attaches securely with a strong magnet. You can place it anywhere so that it can be seen from the back. A good place is the top of the towed vehicle. This kit will keep the tow vehicle and toad wiring separate, and provide stop turn and tail lights for towing your VW.
view full answer... - Will Magnetic Tow Lights Work With a Supplemental Braking SystemIn order to use magnetic tow lights like the Peterson Magnetic Tow Lights part # PE26UR on a towed vehicle you must use a portable braking system like the Blue Ox Patriot Portable Braking System part # BLU37TR. If you want to use a permanent braking system like the Roadmaster InvisiBrake Supplemental Braking System part # RM-8700 you'll also need a direct wire-line harness like the Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit part # RM-15267.
view full answer... - Base Plates for Flat Towing 2014 Ford Fusion SE HybridThe base plate fits for your 2014 Ford Fusion Hybrid will depend on the version of the vehicle that you have. If you have the SE model (with no adaptive cruise control) you can use Blue Ox Base Plate Kit # BX2646. All base plate fits are shown on the linked page. Select your SE Hybrid vehicle style from the drop-down menu to see your options. (Choose either SE Hybrid with adaptive cruise control or without it.) The linked article on flat towing will give you information on all of the...
view full answer... - Can a 2015 Honda Fit Sport Automatic Be Flat-Towed With 4 Wheels on the GroundAccording to one of our primary resources for flat-towing information, Roadmaster Engineering, the 2015 Honda Fit is flat towable. However, your new Fit owner's manual is the best place to check for any cautions or special requirements for flat-towing your exact version of the 2015 Fit Sport. We offer Roadmaster base plates for the manual transmission version of the 2015 Honda Fit Sport. That is their EZ4 Series Base Plate # RM-521569-4. Please refer to the linked instructions at right....
view full answer... - Recommended Items Needed For Flat-Towing A 2014 Ford F-150You can use the Falcon 2, part # RM-520 to tow your F-150. The tow bar has a 6,000 lb limit so you will be within the capacity. If you do not have the base plates you can check out the attached link to our product page for the base plates we offer for your truck. If you do not have EcoBoost on your truck you can use part # 495-1A. If you do have EcoBoost on your truck the base plates that will work are part # RM-524431-5. Since you have already been flat-towing you probably have the...
view full answer... - Parts Needed to Flat Tow 2017 Honda HR-V Behind Class C MotorhomeWe can help you equip your 2017 Honda HRV for flat towing behind your motorhome, and there are a number of different parts you will need in order to do this. For base plates I recommend the Roadmaster EZ5 kit # RM-521570-5 that you referenced. This bracket will accommodate any Roadmaster motorhome-mounted tow bar. I recommend their Falcon 2 tow bar # RM-520. For safety cables use # RM-643. For a lighting kit I suggest an inexpensive magnetic light kit like # PE26UR or # TL21RK; these...
view full answer... - Parts Needed to Tow a 2013 Kia Optima on a Tow DollyI checked the online manual for your 2013 Kia Optima and didn't see anything about recreational dolly towing, only emergency dolly towing. While the manual didn't give any distance restrictions for dolly towing it is always best to confirm whether it is safe or not with a Kia dealer. If it is okay then you simply need a tow dolly and then some lights. Tow dollies tend to have lights on them but it helps to have some extra lights to make sure people around you can tell what you are doing. For...
view full answer... - Parts Needed to Flat Tow a 2007 Honda Fit Behind a Motor Home with an Aventa Tow BarIn order to determine if your 2007 Honda Fit can be flat towed behind a motor home you will want to consult the vehicle owners manual. Since you have an automatic transmission you will need to use base plates # 521558-1. Blue Ox does not have a base plate kit for the automatic transmission models. You can still use your Aventa tow bar by using adapter # BX88178. If you need safety cables, use # RM-643. For a lighting solution I recommend kit # 154-792-118158. Most states now require...
view full answer...
Do you have a question about this Tow Bar Wiring?
Info for this part was:
Expert Research:
Jameson C
Installed by:
Kathleen M
Installed by:
David F
Video by:
Dustin K
Video Edited:
Chris R
Updated by:
Wilson B
Updated by:
Justice A
Edited by:
Daron K
Written by:
Brian T
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Jimmy
3/11/2023
I did some mods to make the tow lights work for my special application. They were well made and are holding up good. Always a pleasure ordering from e-trailer.