To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
This custom-fit base plate kit lets you hook up your tow bar to your vehicle. Tabless design provides a clean, unobtrusive look for your towed car even when not hooked up. Simple bolt-on installation.
Features:
Specs:
Setting up these tabless base plates for use with your Demco tow bar is fast and easy. They easily bolt onto the ends of your tow bar. And because the tabs remain on your tow bar at all times instead of protruding from your vehicle, your car maintains a clean look when it's not being towed.
Using the Demco Tabless base plates to attach and remove your tow bar couldn't be easier. With the base plate tabs attached to your tow bar arms, simply insert the tabs into the receivers on your vehicle and twist to lock them in place. Insert the included pull pins to add an extra layer of security, ensuring the tabs stay put. To remove each arm, simply tug the pull pin to disengage the lock, twist the tow bar arm, and pull the tab out of the bracket.
Keep dirt and debris out of the base plate receivers with the included covers. These high-density polyethylene covers easily snap into place over each pull point when your tow bar is not attached. Limiting internal corrosion makes it easier to slide the tabs in and out and helps to prevent seizing so that the tabs don't get stuck.
Demco makes adapters for use with other tow bars so that you don't have to go through the added hassle and expense of replacing your tow bar when outfitting your new towed car with base plates.
| Type of Tow Bar | Adapter |
|---|---|
| Roadmaster Tracker, Falcon 2, Falcon All-Terrain, Blackhawk, Blackhawk All-Terrain, and Sterling tow bars with serial numbers up to 14,500 | DM9523036 |
| Roadmaster Nighthawk All-Terrain, Sterling All-Terrain, and Sterling tow bars with serial numbers 14,501 and above | DM9523062 |
| Roadmaster Eagle and Eagle 8000 | DM9523014 |
| Roadmaster Falcon 5250 | DM9523023 |
| Blue Ox | No adapter needed |
| etrailer | No adapter needed |
| Demco Kwik-Tow | No adapter needed |
| Curt Rambler | No adapter needed |
Average Customer Rating: 4.8 out of 5 stars (213 Customer Reviews)
This custom-fit base plate kit lets you hook up your tow bar to your vehicle. Tabless design provides a clean, unobtrusive look for your towed car even when not hooked up. Simple bolt-on installation.I really like the way this base plate installed. Everything fit perfect and I like the look once it was completed. It's a snap to hook up with room for error. Our Jeep pulls like it's not even there.
Superb Customer Service and Communication!!!! Fast shipping...item delivered sooner than estimated. The baseplate seems very well constructed (as expected of Demco products).
entailer demonstrated its excellent reputation with this order.
Thank you!
Good product and quick delivery
Once we got thru the installation this Tow plate system has worked great. I like that it is fully hidden when not in use.
Thanks for the great tow setup! with the videos it was a great install for my wife and I. Went on just as it should and looks super! Most people do not even see it on the Jeep.
Hookup to the motor home is super easy, with the demco tow bar, and hookups. Would recommend to anyone looking to tow, look to Demco!
The product itself is great. It fit fine and seems to be designed and built well.
Parts of the installation instructions are not correct for my 2015 Jeep Grand Cherokee Summit. The front fascia has a couple of additional connection points at the bottom and it also connects to the front fender "flares" differently than the instructions show. If you do not realize the differences, then you can definitely damage your front fascia.
Installing it wasn't to bad, took about 5,6 hrs, works great.
Adam was extremely helpful with the parts I needed for my 2021 Jeep Grand Cherokee.
Received product extremely fast. Also they beat Amazon by 10%. I just sent a request before purchase and they handled the rest. Very good company.
It works as expected. Very happy.
Dan Manzer
Solid.
What I expected. Very pleased with the product.
This base plate is of exceptional value and construction. It was fairly easy to install on my 2008 Jeep Wrangler by myself but would have been quicker if I had an extra set of hands. Overall I am extremely happy with how the base plate looks and the customer service was above and beyond expectations. I would recommend the base plate and you don't have to look anywhere else than etrailers for what you need.
Relatively easy to install, works great, less obtrusive than other brands. Instructions are clear, quality is good. Shown with knuckles removed. As you can see, I had to improvise to mount the coiled cord socket and breakaway switch.
Love it,my bumper wasn't rated for towing so I had to go this route. Pleased it fit fine with the aftermarket bumper.
Have had Demco baseplates on two prior vehicles - very satisfied!
One caveat, though, and it applies to the Chevy Equinox: The mounting points are two thin layers of sheet metal tacked together to form the "frame rail", which make for a pretty weak, scary installation. I added an extra piece of metal plate to the backside of the rail. And be sure to install the safety cables that come with the baseplate, just in case!
Exact replacement for our broken one. Your installer recommendation of Montana trailer services is spot on.
John Bell is the owner and sole person. He is terrific. Did excellent quick job, he is knowledgeable and noted prior installer left off safety cables. Recommend him to all. Thank you
Do you have a question about this Tow Bar Base Plate?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.