Mounting Dimensions and Installation Details for Quick Fist Original and Mini Clamps

Updated 10/03/2017 | Published 10/02/2017

Products Featured in This Question

Quick Fist Original Clamps - 1" to 2-1/4" Inner Diameter - Rubber - 25 lbs Each - Qty 2

(251)

$9.90

Quick Fist Mini Clamps - 5/8" to 1-3/8" Inner Diameter - Rubber - 25 lbs Each - Qty 2

(126)

$8.90

Question:

Hello, We are thinking about using your Quick Fist Original Clamps to mount tools in an upcoming job. I was wondering if you could send over a step file or drawing of the Item # QF10010 and Item # QF30050 so that we can implement it into our assembly. Or at least figure out the location of the mounting holes. Thank you,

asked by: Matthew B

Expert Reply:

I was unable to obtain a detailed drawing of the Quick Fist Original Clamps # QF10010 and Mini Clamps # QF30050 referenced in your question, but I am able to provide you with some measurements and instructions that may help with your application.

Starting with the Quick Fist Original Clamps # QF10010, this durable rubber, jaw-style clamp will easily install using a single #10 bolt or screw. I have included an image that shows exactly how they will mount to your wall. The clamp has a mounting area of 2-1/2 inches x 3/4 inches. Each individual clamp supports a safe working load of 25 pounds (50 pounds when used together) and can hold objects from 1 to 2-1/4 inches in diameter.

The Quick Fist Mini Clamps # QF30050 will mount the same way with with a single #10 bolt or screw but has a smaller mounting dimension. These have a mounting area of 1-1/2 inches x 1-1/2 inches. They will hold objects from 5/8 inches to 1-3/8 inches in diameter and each has a 25 pound safe working load limit.

I have also attached a short video demonstration for each of these products so you can get a closer look at their features and how they install.