Trailer Hitch Fit Recommendation for 2018 Ford Edge

Question

Question:

I need a trailer hitch for a 2018 Ford Edge, will this fit and work well?

asked by: Justin

0

Expert Reply:

Yes, the Draw Tite hitch part # 75234 that you referenced fits the 2018 Ford Edge SE/SEL, Sport, and Titanium models so this would fit and work well for you.

expert reply by: Jameson C

0

Answer 1

The only concealed cross tube designed hitch available for the 2019 Ford Edge Titanium is the Draw-Tite Max-Frame Trailer Hitch Receiver #75234. The only portion of the hitch that will be visible once installed is the receiver. The bulky cross tube…

view full answer...

Answer 2

Aftermarket trailer hitch installation will typically block the center sensor of a vehicle lift gate system but does not affect the others, so usually all that needs to happen is you swing your foot near the outer sensors rather than the central one.…

view full answer...

Answer 3

The class III trailer hitch receiver I recommend for your 2018 Ford Edge is the Curt Trailer Hitch Receiver part #C13234 which is a direct fit that installs using pre-existing holes in the frame rail. The hands free liftgate sensor will be limited to…

view full answer...

Answer 4

The trailer hitch I highly recommend for your 2018 Ford Edge Titanium is the Draw-Tite #75234 because it has a hidden crosstube which will allow your Edge Titanium to keep its clean, refined look. The accompanying photo shows this hitch installed on…

view full answer...

Answer 5

For your 2018 Ford Edge (Sport or non-Sport) the best hitch based on what you want is the Draw Tite part #75234. This hitch has a concealed crosstube which means only the hitch opening would hang down below the rear bumper. Check out the picture I…

view full answer...

Answer 6

Thanks for the order of the Draw-Tite Trailer Hitch #75234 and when we test fit it on a 2018 Ford Edge, you are correct that the distance from the top of the receiver to the ground was 12-1/2". In regards to the height of the Draw-Tite #36501,…

view full answer...

Answer 7

Once installed, the Draw-Tite Class III #75234 receiver hitch will slightly limit the areas under the bumper where the hands-free liftgate sensors can 'read' your foot passing under the bumper. The square receiver tube will block access in…

view full answer...

Answer 8

On your 2017 Ford Edge I recommend the Draw-Tite Max-Frame #75234 trailer hitch receiver which is compatible with the Titanium, SE, SEL, and Sport models. The Hands-free Liftgate sensor areas will be limited to areas away from the center where hitch…

view full answer...

Answer 9

Let's start simple, which is the difference between the Draw-Tite Trailer Hitch #75234 (square tube) and Draw-Tite Trailer Hitch #75214 (round tube) that fit your 2018 Ford Edge. The difference is mostly just in the aesthetics, with the square…

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Trailer Hitch Fit Recommendation for 2018 Ford Edge

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching