CargoSmart Tool Stabilizer for E-Track and X-Track Systems - Qty 1

Video Transcript for CargoSmart E Track - E-Track Cargo Organizers - 3481710 Review

Speaker 1: Today we're taking a look at the CargoSmart tool stabilizer for E-Track and X-track systems. This tool stabilizer snaps into an E-Track or an X-track system, so you can hang your cargo inside your trailer. It's a really nice, flexible design. This portion right here flexes to fit many common sized handles. Now with it in its resting position, the diameter of the opening right here is about 1 1/2". Then the slot measures about 7/8".

That's that opening there.Overall, it's a really nice design. The handle easily snaps in, and snaps out of the holder. On the back, we have this spring loaded fitting that snaps into an E-Track or an X-track anchor point. This allows it to be easily moved from one slot to another. A few measurements to go over with you real quick, and then I'll show you how it installs into an X-track system.

Top to bottom is about 3". Edge to edge this direction is an overall diameter measurement of pretty close to 2 1/2". Then from the back of the rubber portion here to the outermost point gives a measurement of about 2 1/4".Again, it's really easy to use. I have a piece of X-track here today, just to show you as an example. What you do is you lift up on this fitting.

You rotate it in. You let go, and you allow it to engage. Again, on the X-track systems, you can install it in either orientation, for a lot of versatility. But this is compatible with E-Track systems as well. That's gonna do it for today's look at the CargoSmart tool stabilizer for E-Track and X-track systems..