See what our Experts say about this Roadmaster Accessories and Parts

• Is There Wireless Remote for Invisibrake
  Hey Michael, yes we do have a wireless transmitter like you are looking for with the part # RM-9530 which is compatible with the Invisibrake.
  view full answer...
• Will The Roadmaster Universal Braking Monitor Allow Me To Monitor My Invisibrake System?
  Hello Sam. It sounds like you are on the right track here, because the Roadmaster Universal Braking Monitor for Flat Tow Brake Systems # RM-9530 is exactly what you will need. This will allow you to monitor your Invisibrake system. You will have to wire the transmitter to the battery for a constant 12v power source, and you will have to run wires to the break switch. I have included a link to the manufacturer instructions below.
  view full answer...
• Does the Roadmaster Universal Brake Monitor Come with an Actuator Arm
  The Roadmaster Universal Brake Monitor # RM-9530 is just the monitor. It is designed to be used in conjunction with a braking system like the Roadmaster InvisiBrake Supplemental Braking System # RM-8700. The arm that you are seeing would be included with the braking system, not the monitor. Depending on your vehicle, there may be some additional parts needed. If you want to provide me with your year/make/model, I would be able to tell you if there are any additional parts needed to use...
  view full answer...
  
• Brake Light Switch Wire Color on a 2018 Ford F-150
  The cold side of the brake light switch on your 2018 Ford F-150 should be a purple/white wire but I really encourage you to test it with a circuit tester.
  view full answer...
• Can Roadmaster Universal Braking Monitor Mount Under Hood of Vehicle
  Hey John, so there's no reason you couldn't mount the Roadmaster Universal Braking Monitor # RM-9530 under the hood of your vehicle. The signal strength would be perfectly fine there.
  view full answer...
• What is Needed to Get a Monitor for the Roadmaster InvisiBrake in a Motorhome if the Toad has Parts
  Thank you for reaching out, it sounds like you have everything in place on your Equinox and just need the motorhome side. The Roadmaster 2nd Motorhome Monitor/Alarm Kit # RM-98850 would take care of that if you are wanting it to operate the same as if you got a new Roadmaster InvisiBrake Supplemental Braking System # RM-8700. However, since you mentioned the Optional Adapter for Roadmaster InvisiBrake Supplemental Braking System # RM-8700-9530, it sounds like you may looking at upgrading...
  view full answer...
• How To Install The Roadmaster Universal Brake Monitoring System In A 2013 Honda CR-V
  To install the Roadmaster Universal Brake Monitor # RM-9530 on your Honda CR-V you will want to first install the Roadmaster Universal Stop Light Switch Kit # RM-751000. This kit will have three wires, red (ground), black (power), and blue (brake signal). You'll want to run the red and black wires directly to the battery with the included inline fuse holder. Once this is installed you'll attach the blue wire from your stop light kit to the blue wire on your brake monitor. The yellow wire...
  view full answer...
• What Does Optional Adapter For Roadmaster Invisibrake RM-8700-9530 Do?
  I reached out to Roadmaster and the reason your Older Roadmaster Invisibrake # RM-8700 requires the # RM-8700-9530 is that it was made before the monitor 9530 was made, and the adapter has a built in microchip that regulates the voltage to the # RM-9530 that the newer Invisibrakes do automatically. Without using the adapter the Invisibrake can engage randomly causing quite a safety issue so I recommend using the adapter. If yours is damaged then just use the # RM-8700-9530 as a replacement. I...
  view full answer...
• Recommended Monitor Light for Braking System While Flat-Towing
  If you are looking for a brake indicator light to use on your flat-tow setup I recommend the Roadmaster Universal Brake Monitor part # RM-9530. This unit simply plugs into the outlet in the dash on the motorhome and then wires into the towed vehicle so it can let you know each time the brakes are applied. There is no wiring on the motorhome side, just the towed vehicle.
  view full answer...
• How Does Roadmaster Invisibrake Monitor Install
  For the Roadmaster InivisiBrake monitor part # RM-9530 you'd wire it to your Invisibrake by running the black wire to ground, the red wire to 12 volt power, the yellow to the breakaway switch, and the blue wire to the brake light switch. I also attached a link to install instructions as well as an install video for you to check out too.
  view full answer...
• Troubleshooting Flashing Red Light and Alert of Roadmaster Brake Monitor part # RM-9530
  Red lights flashing with the Roadmaster Brake Monitor part # RM-9530 with an audible alert indicates a breakaway is in progress. The yellow wire of this kit attaches to the breakaway kit wiring installed on the tow vehicle. When voltage is applied on this circuit the alert thinks a breakaway has occurred. You must have a miswire somewhere that is putting voltage on this circuit when you apply the breaks.
  view full answer...
• Motorhome Mounted Monitor Light for Towed Vehicle Brakes
  The SMI Stay-IN-Play DUO Supplemental Braking System part # SM99251 comes with a monitor light that will get installed in the windshield of the tow vehicle and will then illuminate when the brakes in the towed vehicle are applied. If you want something in your motorhome that lets you know when the brakes in the towed vehicle are applied you can use the Roadmaster Universal Brake Monitor part # RM-9530.
  view full answer...
• Availability of Light to Know when Flat Towed Vehicle Brakes are Applied
  Hey Keith, we have the Roadmaster Universal Braking Monitor part # RM-9530 which will give you exactly what you are looking for.
  view full answer...
• Is There A Separate Monitoring System Available To Alert You When The Brakes Are Depressed
  If you're wanting a signal that the brakes are being applied in your towed vehicle, separate from the Blue Ox braking system you have then you could first install the Roadmaster Universal Stop Light Switch Kit # RM-751000. This kit will attach to your brake pedal and sense when it's depressed and send out a signal which you'll tie into the Roadmaster Universal Brake Monitor # RM-9530. The # RM-9530 is going to have a receiver for your motorhome that will plug into a 12v outlet and display...
  view full answer...
• Road Master Brake Monitor Alarm Settings
  When the Status light is flashing bright red and the Brake light is flashing yellow the towed vehicle’s brakes have been on continuously for 30 seconds (for example, at a long stop light). Pump the motorhome brakes to reset the 30 second timer that is present to give you a warning to help prevent brake failure on the towed. Alternatively, press the “Silence” button once and the timer will now alarm only after 60 seconds of continuous braking. If the “Silence” button is pressed again after...
  view full answer...
• Universal Transmitter and Receiver for LED Functions with Brake Buddy Classic Supplemental System
  The Brake Buddy system is a manufacturer we don't carry, but it sounds like you simply want to know when your vehicle brakes are being activated so I do have a solution for you. You can use the Roadmaster Universal Brake Monitor # RM-9530 which will be an easy LED system to give you the information you are seeking. I've attached a couple of videos to assist.
  view full answer...
• Does Roadmaster Universal Brake Monitor # RM-9530 Work without Breakaway Kit Installed
  I spoke with my contact at Roadmaster and he informed me that the Roadmaster Universal Brake Monitor # RM-9530 that you referenced will work without a breakaway kit installed. Reason being is that under normal circumstances the breakaway circuit of this does not have any voltage on it and it's only when it sees voltage does it know that a breakaway system has been activated.
  view full answer...
• Easy Way to Find Just Stoplight Circuit on 2015 Jeep Cherokee
  Since your 2015 Jeep Cherokee has the tow package it does have the brake signal present at the brake controller install port. What you could do to easily access just the stoplight circuit would be to plug in the install harness part # 3014-S to the brake controller port on your vehicle under the hood and then use the red wire for the stoplight circuit and you'd be set.
  view full answer...
• Installing the Roadmaster Universal Brake Monitor on 2013 Subaru Forester with Invisibrake
  I can certainly clear all this up for you and I was able to confirm this information with Roadmaster directly in regards to your 2013 Subaru Forester. When tapping into the breakaway wire on the Invisibrake # RM-8700 to complete the installation of the Roadmaster Universal Brake Monitor # RM-9530, you will want to tap into the thick yellow wire you mentioned; you'll just need to cut into the thick covering on the wire and make your connection. When it comes to the blue wire on the # RM-9530,...
  view full answer...
• Does a Monitor Light Come with the Second Vehicle Kit for RoadMaster BrakeMaster and Is It Needed
  In regards to a Roadmaster BrakeMaster System, the RoadMaster Second Vehicle Kit with BreakAway for BrakeMaster Systems part # RM-98160 which I think is what you have does not come with any sort of monitor light. However, this can be obtained with the RoadMaster Replacement LED Display Monitor for BrakeMaster Systems part # RM-300065-00. The monitor light is not required for proper functionality of system nor is it required by law to have one but I strongly recommend one as it could potentially...
  view full answer...
• Indicator Light Recommendation for Use with Brake Buddy Classic Brake System
  The Brake Buddy system is a manufacturer we don't carry, but it sounds like you simply want to know when your vehicle brakes are being activated so I do have a solution for you. You can use the Roadmaster Universal Brake Monitor # RM-9530 which will be an easy LED system to give you the information you are seeking. I've attached a couple of videos to assist.
  view full answer...
• Road Master Brake Alarm Settings
  I called the manufacturer to verify and yes, Roadmaster Universal Brake Monitor, # RM-9530 is on a loop. So what you did to move forward from 30 to 60, then to 90 and then 120, move forward once more to return to 30 second setting. From the manual: "The “Status” light is flashing bright red; the “Brake” light is flashing yellow; accompanied with an audible alarm. The towed vehicle’s brakes have been on continuously for 30 seconds (for example, at a long stop light). Pump the motorhome...
  view full answer...
• Recommended Parts To Flat-Tow a 2019 Jeep Cherokee Trailhawk
  I have attached for you below a list of parts I recommend using to flat-tow a 2019 Jeep Cherokee Trailhawk. Roadmaster Direct-Connect Base Plate Kit part # RM-521451-5 (Easiest To Use) Roadmaster Nighthawk All Terrain Tow Bar part # RM-676 (Includes Safety Cables and Umbilical Cord) Roadmaster Universal Hy-Power Diode Wiring Kit part # RM-154 (Cleanest Install Look) Blue Ox Patriot Portable Braking System part # BLU37TR (Easiest Install) Roadmaster Battery Charge Line Kit for Towed Vehicles...
  view full answer...
• Is Additional Stoplight Switch Required When Installing Hopkins Brake Buddy
  The Hopkins Brake Buddy systems like the Stealth part # HM39530 that we carry come with a stoplight switch for the activation of the system. The brakes of the tow vehicle will have to apply for the system to activate and start activating the brakes of the towed vehicle. There would be no need to also install an additional stoplight switch. If you wanted a monitor to allow you to know when the brakes are being applied you'd then want the part # RM-9530 which gives you a monitor you can...
  view full answer...

Do you have a question about this Accessories and Part?