Kit includes 18-3/8" long equalizers and bolts and shackles for suspending your leaf springs from your trailer frame. Use with HAP-103-00 for a complete tandem-axle kit. Designed for use with 10,000-lb to 15,000-lb, heavy-duty Dexter axles.
Features:
| Axle Capacity | A - Distance Between Front and Center Hangers | B - Distance Between U-Bolts | C - Distance Between Center and Rear Hangers | D - Distance Between Center of Axle and Trailer Frame |
|---|---|---|---|---|
| 10,000 lbs - 15,000 lbs | 35-1/10" | 42-1/4" | 34-2/3" | 5-1/2" |
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello everybody, this is Jeff at etrailer.com. Today we're gonna take a look at the Dexter Tandem Axle Trailer Equalizer kit for 3-inch wide slipper springs. Now this kit here is gonna include two 18-3/8-inch long equalizers and all the necessary hardware and the two center hangers for suspending your leaf springs from your trailer frame. Now what I would recommend to do is on the product page of this part number, the very middle of the page, you'll see a table with a bunch of dimensions on it. Use that table to determine where the hangers will be located. Now this is designed for use with tandems 10,000 pound to 15,000 pound heavy-duty Dexter axles.
It does not include components from mounting the axle to the springs. Now we also recommend if you use this with the part number HAP-103-00 that we sell separately. It'll give you a complete tandem axle kit. And that part number, the HAP-103-00 part will contain the front and rear hangers and mounting hardware. This is gonna allow you to attach four slipper springs to your trailer frame.
It includes the two, right here, 18-3/8-inch long straight equalizers, both one right, one left. It's gonna allow for a 42-1/4-inch distance between the axles. Just run to zoom in a little closer. Right here, this center hole, it's a 1-1/8-inch diameter center hole for mounting your center hanger to this. Over here we have a 1-inch diameter hole for the spring eye to attach to, and down here a 1/2-inch diameter side hole for attaching to the spring.
Also includes, as we mentioned, these tall center hangers. These are 4-1/8-inch tall center hangers. Bolt goes right in there. Comes with the two 6-inch long 1-1/8-inch diameter equalizer bolts with the lock nuts. It also comes with, right over here, two 5-1/2-inch long, 1-inch diameter spring eye bolts with lock nuts for attaching the spring eye over on this end.
And then over right here we have two 1/2-inch diameter, 4-1/2-inch long by 1/2-inch diameter spring keeper bolts with block nuts for attaching the spring down here. And as we mentioned, does not include the components for mounting the axle to the springs. It comes with a nice set of instructions. Now we do also offer many other items for your towing adventures. Just click on the trailer tab that's at the top of the website page. And also if you do have any additional questions regarding this part or any other item we carry, please feel free to reach out to us so it can help you get all of your questions answered for you. But that's gonna do it for a look at this Dexter Tandem Axle Trailer Equalizer Kit for 3-inch wide slipper springs.
Do you have a question about this Trailer Suspension Part?
Condition: Surface Scratches
Notes: Item has minor cosmetic scratches.
Condition: Surface Scratches
Notes: This item has cosmetic scratches and rust. Otherwise new and unused.
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.