bing tracking image
  1. Trailer Hitch
  2. CURT
  3. 1-1/4 Inch Hitch
  4. Class II
  5. 3500 lbs GTW
  6. Visible Cross Tube
THIS ITEM IS NOT A FIT FOR
2013 Kia Forte5
etrailer Installation
We'll connect you with nearby partnered installers who know this exact setup.
CURT

Curt Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4"

Part Number: C12107
In Stock
$223.10
Retail:$351.95
You Save: $128.85
Trailer Hitch
Not Confirmed to Fit

2013 Kia Forte5

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
By submitting this form, you understand and agree to our Terms of Sale, Website Terms of Use and Privacy Policy.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

etrailer Installation
We'll connect you with nearby partnered installers who know this exact setup.
Perfect for light-duty towing, this custom, vehicle trailer hitch receiver features fully welded, gloss powder coated steel construction. Drawbar sold separately. Great Prices for the best trailer hitch from CURT. Curt Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4" part number C12107 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (175)
  • Q & A (0)
  • Photos

CURT Trailer Hitch - C12107

Highlights

  • Custom Fit for Your Vehicle: Mounts to existing attachment points
  • Tows up to 3,500 lbs (GTW): Handles light-duty trailers, boats, or small campers safely
  • Holds up to 350 lbs (TW): Supports bike racks, cargo carriers, and towing accessories
  • Bolt-On Installation: Mounts with included hardware—no welding required for setup
  • Durable Steel Build: Fully welded, round-tube design provides long-term towing strength
  • Rust-Resistant Finish: Gloss black powder coat over base layer protects against corrosion
Made in USA

Features to know about

Carry Your Gear with Confidence: Class II 1-1/4" Trailer Hitch Receiver

This Curt trailer hitch receiver is built for light-duty towing and everyday hauling. With a 3,500-lb gross trailer weight rating and 350-lb tongue weight limit, it’s ideal for small trailers, cargo carriers, or bike racks. The 1-1/4" x 1-1/4" receiver opening gives you compatibility with a wide range of Class II towing accessories and mounts. Whether you’re pulling a small camper or adding extra storage on the back, it’s designed to handle those daily utility tasks without issue.

Strong Steel Construction That Lasts: Welded, Coated, and Ready for the Road

The hitch is made from fully welded steel with precision, robotic welding to ensure strength and accuracy fitment. It’s finished in a gloss black powder coat laid over a protective base coat for improved corrosion resistance. That layered finish keeps rust at bay and helps the round-tube design stay looking good through years of exposure to road grime and weather.

Simplify Installation at Home: Bolt-On Fit with Hardware Included

You won’t need to weld or rely on specialty tools to mount this hitch. It uses a bolt-on installation method designed for a custom fit to your vehicle’s frame, and it comes with the complete hardware kit and instructions you need to get started. Most DIYers can handle the install right in their driveway using standard tools, making it an approachable upgrade for anyone looking to add utility quickly.

Add Function Without Bulk: Clean Round-Tube Design

The visible cross tube has a simple, rounded shape that looks tidy under the rear bumper without drawing attention. It gives you the utility of towing and cargo support without a bulky appearance. This design is a practical match for drivers who want extra hauling capability but still care about keeping their vehicle’s look clean and balanced.

Specs

Dimensions

  • Receiver opening: 1-1/4" x 1-1/4"

Weight and Capacity

  • Rating: Class II
  • Maximum gross trailer weight: 3,500 lbs
  • Maximum tongue weight: 350 lbs

Warranty

  • Limited lifetime warranty

12107 Curt Class 2 Trailer Hitch Receiver

Similar to Draw-Tite 36540

Installation Details C12107 Installation instructions

This Product Fits The Following Vehicles




Customer Satisfaction Score:

Ratings & Reviews

4.7

175 reviews
5 Stars
(141)
4 Stars
(25)
3 Stars
(7)
2 Stars
(2)
1 Star
(0)
Review Sort Icon
by:
2017 Toyota Camry
5/5 stars for shipping and customer service. Everything arrived in perfect condition within 2 days of ordering and I had several follow up emails asking how everything was.
5/5 stars for the quality of the trailer hitch. I didn't have any issues with fitment, missing pieces, or cosmetic issues.
4/5 stars for the instructions. The pictures were in black and white which made it difficult to see specific details for installation. There were a few steps that I got tripped up on and had to reread when I was partially though that step because it wasn't that clear. I highly recommend that you use a step drill bit to make the holes for the carriage bolts and to buy a pair of exhaust hanger pliers to make the process both easier and faster.

Overall it's a great product backed by great customer service with some less than ideal instructions. It took me about 6-8 hours in total to install. Unfortunately I could only work on it 1 step at a time after work between several different evenings and after buying some tools needed for the job.
Heather A. profile picture
Etrailer Expert

Heather A.

5/1/2026

Thank you for the wonderful review Logan and the installation advice. Those instructions can be hard to follow sometimes but the install looks great. I can tell you put a lot of work into it! What next? Any big plans?

by:
Toyota Camry
Following the instructions, the installation went fine without any issues. I am very happy with how it turned out and product quality is excellent. Some suggestions:
1) Include a simple plastic template for drilling the 1/2" carriage bolt hole. Current instructions say to install the hitch, mark the holes, remove the hitch, drill the holes, reinstall the hitch. A template, bolted to the two existing exhaust mounting holes that locates where the 1" whole needs to be drilled, would save a lot of labor.
2) The Camry Hybrid includes a bracket that supports the trunk located battery, and this bracket interferes ever so slightly with the hitch frame mount. I had to file the battery support bracket a little. I recommend adding this step to the instructions.
3) The trim instructions for the splash panel and exhaust heat shield are overkill in my opinion. I did not need to remove nearly as much material to fit around the hitch receiver.
4) Maybe it's just me being a novice, but I had to unbolt the last three exhaust system mounts for the rear muffler to be low enough to drill the 1" frame hole.
5) I did this solo, but a second person would have helped to get the holes aligned.
by:
2012 Toyota Camry
The hitch appeared to have been slightly bent during shipping.
However, customer service advise how we could try to straighten it out and if we failed or unable to otherwise correct that they would refund or re-ship.
Turns out their advice worked and the hitch looks great
by:
2017 Toyota Camry
I invested four hours total putting the hitch on the car. One hour was prep and cleanup. Could do another in less than two hours easy. I decided to ramp up the rear of the car with boards rather than jack and jack stands since they are always in the way when you're working underneath. (See pic.) I had the wife help me twice when putting the hitch on, the rest was just me. With the right tools near anyone can do it. (I'm 74). Your video and instructions are excellent and so is your product.
Have to mention something that will put a smile on your face. The first thing to be done was to remove the two brackets on either side of the car. They are held in place with two 14mm bolts on either side but they are kind of tough to get at so I decided to remove the 17mm nuts instead since they were easier to get at. A 17mm wrench with a mallet wasn't enough to get the nuts off so I got a 1/2" breaker bar and with all the strength I could muster I finally got those stubborn SOB's to break loose. Only then did I think to take a closer look and sure enough they were welded on (as per your instructions). Luckily they were meant to stay off.
Jim D.


by:
2012 Toyota Camry
I didn't cut off any underbody panel pieces. I just made a slit for the hitch to slide through. Also didn't cut off any heat shield. I drilled a hole for the 1/2" screw and torqued it to xx ftlb as instructed. Every thing worked fine. Hard to believe the video instructed to cut off that much. A bit crazy IMO. Also.. super snug fit. So snug I had trouble getting the M12 bolts to line up with the thread in the subframe. Pain the ass, but eventually got it in.
by:
2014 Toyota Camry
The build quality is excellent and well built. The tolerances are very tight, I had to wallow out one of the mounting holes slightly. It fits a 2014 Hybrid nicely. The hardest part was dealing with the muffler being in the way. I am glad I had a single exhaust design. Also, my vehicle did not have access to the frame to feed the bolt though. I had to use a dremel to open a larger area for the rear mounts. Took a couple hours and had a helper hold the muffler aside while trying to drill required holes. It wasn't the easiest to install so I only gave 4 stars. But the product itself is well made and I feel it will work well.
by:
2014 Toyota Camry
The 4 mounting holes that were drilled in the hitch by CURT, the Hitch manufacturer, did not line up with the 4 mounting hole that were drilled by Toyota on my camry which was purchased new and never in an accident. Even at the widest separation between the left-side and right-side holes the separation between the left-side and right-side holes were 1/8 of an inch too narrow. This required a lot of extra time and effort redrilling the holes on the hitch to make it fit.
by:
2012 Toyota Camry
Fast delivery and everything fit perfect. Easy installation after watching etrailers videos. Lowest price I found on the internet for this hitch. Thanks for the great service.
by:
2016 Toyota Camry
Fairly easy to install. Took 1hr and 45 minutes to install. Don't need the instructions just watch the video provided by etrailer. It easier to use a 1 and 1/8 hole saw then the step bit.
by:
2016 Toyota Camry
Item delivered quickly and was just as described. Perfect fit!
by:
Great hitch, just no wiring harness available to make installation seamless.
by:
Very easy to get it installed on our Toyota Camry Hybrid for not very much by our local mechanic.
by:
2017 Toyota Camry
All equipment was delivered on time. Hitch, wiring harness, receiver and ball. Watched video's on installation of harness and hitch. Went down to my garage and installed both with the help of my girlfriend. Very satisfied with the products and the installation. etrailer supplied the goods and the knowledge. I am very happy that I went this route.
by:
2013 Toyota Camry
The hitch was of industrial strength sadly unlike the enclosed instructions, which were weak at best. I have installed similar hitches on similar cars and getting this on a 2013 Camry V6 took 5 hours. Others have been a maximum of 2 hours. This includes the trip to Home Depot to get THE tool that you need that is not specified - a one inch metal hole saw that you WILL need in order to install this hitch. In summary, looks good, solid, needs better instructions. Do your own due diligence before you start on this and do NOT rely on the included instructions.
I should also mention that the plastic cover that the instructions say "give back to the customer" I did manage to get back on to the underside of the car with a bit of brute force and a couple fewer of the self tapping screws (bolts?) yet still is secure on the car after installation.
Jim D. profile picture

Jim D.

5/28/2015

The product works fine. The only issue is that the cut back exhaust heat shield rattles occasionally.

by:
Fast service
by:
2017 Toyota Camry
Prompt delivery from etrailer. Quality well built trailer hitch. Provided instructions were pretty inadequate but watching the installation video on the website a couple times was all I needed to install this item. For my Camry it did involve some drilling as the video showed but was nothing super complicated. I am pretty mechanically inclined, and doing this installation all by myself took approx 4 or 4.5 hours from open box to cleanup. Very satisfied with this hitch and etrailer!
James profile picture

James

4/12/2019

Works fine, no problems with anything. Tucks up nice under the bumper so its not sticking out. No problems with it scraping the ground as others have said. Solid and built well. Thanks etrailer!!!

by:
2017 Toyota Camry
Fit just righ, no problems att all. Shipped very fast.
by:
2013 Toyota Camry
Although the product it self is pretty well made, i am slightly disappointed in over all fitment of the trailer hitch. i am sure engineers have their reasons for the hitch hanging so low from the bumper.
install is fairly straight forward other then the need to widen the holes a little bit.
over its a good hitch i knew what i was buying i knew it would hang low.
good product nevertheless.
etrailer always makes it easy to buy.
Neil S. profile picture

Neil S.

12/27/2017

After a full year of ownership I am still happy with my hitch although it is starting to chip and rust is coming through around the receiver hole.still cant get used to seeing how low it hangs and have scraped it a couple of times coming out of driveways.other then that its a great addition to a car, converts a camry into a pickup truck with a little 4x6 trailer.

by:
2013 Toyota Camry
I installed this on a 2013 Camry SE. It fit perfectly and it went on exactly like the instructions said. I'm above average when it comes to handyness and it took me an hour including clean up. I did it in my garage with the car up on jack stands. If you are looking for a hitch is recommended this one.
Robert profile picture

Robert

6/22/2021

Its been a year since Ive installed this hitch. It still looks like new. I live in Wisconsin so its exposed to a lot of road salt in the winters and there is no rust.

by:
2015 Toyota Camry
I haven't even opened the box - this review is based solely on my past experience with the etrailer. Take it or leave it.

The review: I have never had the wrong parts shipped or the slightest problem with the etrailer on all my past orders. This is a Christmas present for someone else and I'm sure it will be perfect. Even if this wasn't "perfect," I have absolutely no doubt they (etrailer) would fix whatever might come up
Don profile picture

Don

10/29/2017

Daughter-in-law has it installed on her Toyota and is working fine I’ve subsequently ordered a couple of more. The latest was on our 2016 Lexus RX 350 and it too “fit like a proverbial glove”-trailer light interface wiring also snapped in with no issues

by:
Toyota Camry
Works great on my Camry. Very secure.
by:
2012 Toyota Camry
We purchased this hitch for our 2012 Toyota Camry LE. Toyota does not recommend towing with this vehicle, nor sell a Toyota hitch for this car. I don't know why, the Europeans will tow a huge camper behind any 4 cylinder gas miser. However we use the hitch to mount our bicycle rack, and it has worked out great for this purpose. We had it professionally installed by our auto-body mechanic, because frankly I'm at the stage of life where I can afford to pay someone who has a lift, instead of me contorting my body like a pretzel to climb under there and proceed to scrape my knuckles, lay down tools out of reach and otherwise frustrate myself into yelling profanity within earshot of the neighbors little kids. However feedback from the mechanic states that in went in like apiece of cake except that he had to cut a bit of the heat shield to make it fit. So if you are coming back from a trip to the moon, remember, you have a little less heat shield for re-entry.
by:
2012 Toyota Camry
This is the third hitch I have purchased from e trailer and as always it is an excellent fit and hitch. The hitch is on a Camry and looks and works great. Mike
Mike V. profile picture

Mike V.

4/21/2016

It is a great product. It is the second one I have purchased and it was as easy to install as the first one. If I change cars again I will buy from e-trailer.

by:
I should have bought the other brand. But the Curt was rated a little higher tongue weight and had a round crossbar which I had thought would be stronger. The Draw-Tite was a square tube crossbar but it had the extra holes predrilled that allow you to reinstall the heat sheilds after you mount the hitch to the frame.(too bad I didnt notice this until after I started the install otherwise I could have tried exchanging the Curt for the Draw-Tite)

The underneath and trunk of my 2014 vehicle didnt look like the 2013 Avalon vehicle they showed in their video's so had to figure my way around the differences, which added time to the install. The instructions call for a 1/2" drill, but even a 1" hole cutter wasnt quite large enough for the head of the 1/2 inch bolt and steel flange to fit thru, so I had to enlarge across the diameter with a round file by hand.....that took quite a while also, especially as there isnt much room to work above the hanging muffler while lying on a cold concrete floor with the car up on ramps.

The Curt hitch's predrilled holes also didnt seem to line up very well and the bend angle of the left and right flange dont seem to be even. The angled portion leading to the drawbar seems too angled on one side and less angled on the other. As a result the driverside contacts/rubs the spare tire compartment, while there is still clearance on the passenger side.

Plus the fastener hardware for my real collision deflector brackets were badly rusted and it took me forever to get them off with lots of elbow grease and liquid wrench penetrant.
by:
The trailer hitch works perfectly. I use it weekly to haul debris and bring construction materials back to my project houses. The paint shows no signs of failure, even with the salt that’s used on our roads. Likewise the steel shoes no sign of age by way of rust.

This is the second Curt trailer I’ve used on my cars and they have both performed without flaw.

One caveat, I have to be careful on steep driveways entrances and street crossings because the trailer can scrape on the pavement. This is not a design failure, the hitch simply lowers the vehicle clearance by a couple inches. Still, I’d rather get the mileage of a car for 90% of the time I use it and use a trailer for the heavy lifting.
25
175
true
Show More Reviews

See what our Experts say about this CURT Trailer Hitch


Info for this part was:

Employee Joe V
Test Fit:
Joe V
Employee Randy B
Test Fit:
Randy B
Employee Robert C
Test Fit:
Robert C
Employee Mike L
Expert Research:
Mike L
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Lori W
Expert Research:
Lori W
Employee Zack K
Video Edited:
Zack K
Employee Joshua S
Video Edited:
Joshua S
Employee Jacob T
Video Edited:
Jacob T
Employee Kathleen M
Video Edited:
Kathleen M
Employee Chris R
Video Edited:
Chris R
Employee Andrew K
Video by:
Andrew K
Employee Andrew L
Video by:
Andrew L
Employee Lindsey S
Written by:
Lindsey S
Employee Wilson B
Updated by:
Wilson B
Employee Kristina F
Updated by:
Kristina F
Employee Michael B
Updated by:
Michael B
Employee Isabelle B
Updated by:
Isabelle B

At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-800-940-8924