Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
If you’re done dealing with dim or short-lived bulbs, this 4-1/16" x 2-1/8" rectangular LED light is an easy upgrade. The 10 bright amber LEDs give off a clean, even light while drawing only 0.087 amps at 12.8V, so you get strong illumination with minimal power use. Since there are no filaments to break and no bulbs to replace, it’s built to keep shining for the long haul.
When you want your trailer to be seen from both the front and side, this PC-rated light does exactly that. It produces a 90-degree beam to either side of its centerline, giving you a full 180 degrees of visibility. Properly mounted, it works as both a clearance and a side marker light, keeping your rig visible in traffic or low light.
No need to drill out big holes or cut into panels. This surface-mount design installs flat against your trailer using standard mounting hardware (not included). With 3" center-to-center mounting holes on the flange, it’s a straightforward fit that looks clean and stays secure once installed.

The lens and housing are made from durable polycarbonate that snaps together into one solid piece. That means it stands up well to vibration, dust, and weather without cracking or clouding. The amber lens sits over matching amber LEDs for a bright and consistent color output that keeps its clarity over time.
A simple 2-wire design—one power lead and one ground—makes hookup quick and foolproof. No complicated adapters or extra connections needed. And with a lifetime warranty on the LEDs, you can count on reliable performance mile after mile.


Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Speaker 1: Today we are taking a look at the Optronics Double Bulls-eye LED trailer clearance or side marker light. This LED trailer light functions as both a clearance light and side marker light when properly mounted. It features a unique double bulls-eye design and it is an LED system. LED's make great replacements for incandescent lights. They last longer, they burn brighter, they're more efficient. With LED's you don't have to worry about replacing bulbs and you don't have to worry about brittle filaments.This unit contains a real nice durable polycarbonate snap on lens so it can be replaced if ever needed.
And it has a white housing. It is a surface mount installation. We have two mount holes right here. You gain access to those by removing the lens. You can simply take flat head screwdriver and just pop that lens directly off the housing.
Mounting hardware not included. It's a two wire design. White wire for ground, black wire for power. It's PC rated and SAE and Department of Transportation compliant.We're going to take a look at the measurements real quick and then we'll hook it up to power. Edge to edge going in this direction is about 4 and 1/16 inches.
Top to bottom is about 2 and 1/8 inches. And the overall depth is about 1 and 1/8 inches. The mount holes on the unit are separated on center by 3 inches.We're going to go and hook it up to power that we see it with power running to it and we will also turn off our overhead lights so you can see it in a low light setting. It sends out a really nice bright, consistent signal. Here you can really get a good look at the double bulls-eye design of the unit.
It contains a total of 10 LED's or 10 diodes so the multi-diode design really helps optimize the overall light output. The power draw at 12.8 volts is 0.087 amps and Optronics puts a lifetime warranty on the LED's.That going to do it for today's look at the Optronics Double Bulls-eye LED trailer clearance or side marker light.
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
Ratings & Reviews

Shawn
8/4/2016
Still work great
Do you have a question about this Trailer Light?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.








Jim
5/2/2017
Really like these light very much. Very reliable and a great improvement from the incandescent lights they replaced. I would recommend using a wired ground vs. ring terminals to frame for a lifetime of trouble free operation.