Optronics Double Bullseye LED Trailer Clearance or Side Marker Light - 10 Diodes - Amber Lens
(229 reviews)
Price: $10.69
In Stock
Optronics Double Bullseye LED Trailer Clearance or Side Marker Light - 10 Diodes - Amber Lens
Item # MCL45AB
Retail:$12.48
Our Price: $10.69
You Save: 14%
Orders above $50 qualify for Free Shipping
In Stock
- All Info
- Reviews (229)
- Q & A (0)
- Photos
- Why etrailer?
Optronics Trailer Lights - MCL45AB
- Clearance Lights
- Rectangle
- LED Light
- Amber
- 4L x 2W Inch
- Surface Mount
- Rear Clearance
- Side Marker
- Non-Submersible Lights
- Optronics
4-1/16" x 2-1/8" Rectangle. LED trailer light functions as a clearance or side marker light. Unique double bullseye design. Durable polycarbonate housing and lens. Surface mount - hardware not included. 1-Wire design. PC-rated.
Features:
- LED trailer light functions as both a clearance light and a side marker light when properly mounted
- Unique double bullseye design
- LEDs make great replacements for incandescent lights
- Last 50 times longer
- More efficient - provide brighter light with less power output
- No bulbs to replace - no brittle filaments
- Durable polycarbonate snap-on lens and housing
- Amber lens over white LEDs
- Surface mount - hardware not included
- 1-Wire self grounding design
- PC rated
Specs:
- Overall dimensions: 4-1/16" long x 2-1/8" wide x 1-1/8" deep
- Distance between mounting holes (center on center): 3"
- Diodes: 10
- Power draw at 12.8V: 0.087 amps
- Lifetime warranty on LEDs
Surface-Mount Light
Surface-mount lights install flat against the surface of the trailer, so a hole does not need to be cut into the trailer for the light. This type of light is installed using a flange or bracket that has mounting holes. And mounting hardware is used to secure the light to the trailer.
PC-Rated Lights
A PC-rated light produces a 90-degree angle of light to either side of its centerline for a total of 180 degrees of coverage. This beam pattern can be clearly seen when you are standing directly in front of the light, as well as when you are standing on either side of the light. When properly installed, this type of light can function as both a front clearance light and a side marker light or as a rear clearance light and a side marker light.
MCL45AB Optronics Double Bullseye LED Trailer Clearance or Side Marker Light - 10 LEDs - Amber Lens - 1-Wire
Alternate part number: MCL-45AB
California residents: click here
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
- etrailer mistake
- Wrong item was ordered
- etrailer mistake
Customer Reviews
Optronics Double Bullseye LED Trailer Clearance or Side Marker Light - 10 Diodes - Amber Lens - MCL45AB
Average Customer Rating: 4.8 out of 5 stars (229 Customer Reviews)
4-1/16" x 2-1/8" Rectangle. LED trailer light functions as a clearance or side marker light. Unique double bullseye design. Durable polycarbonate housing and lens. Surface mount - hardware not included. 1-Wire design. PC-rated.by: Al07/14/2022
The lights are exactly as advertised. Very bright. I had previously replaced the incandescent bulbs with led bulbs which was an improvement but these are at least twice as bright as that. Also the back of the fixture has a hollow space that allows for the fact that the original wires were in a different location than on these. Therefore very easy to install.
by: James08/18/2022
The product itself is good as always. I do wish on the other-hand that someone would have called or emailed me when there was a duplicate order. I now have double what i need and yes etrailer was able to get me return info but its a pain in the ass to get it returned for me.
by: Johnny 12/19/2021
Did not realize how much I missed having the light when trailering at night. Very bright!
by: Robert 07/27/2022
Thanks, appreciate the quick delivery
by: Don U.04/17/2016
Installed LED trailer lights. They work well, easy install. Night and day difference
from old lights. Recommend switch to LED.
Comments
Still working as expected, no issues at all
Don U - 04/17/2017by: Josh S.11/07/2016
Great quality light. Is install and super bright. Would buy again.
by: Dennis 05/19/2021
Replacing incandescent marker/ clearance lights with LED. These items were easy to find on the website, the order process was smooth, shipping was quick, and install super easy. As long as they last as they should this is a no brainer. First time using etrailer.com, definitely won’t be my last!
by: Will F.11/21/2013
Products are what they, I find eTrailer sells quality items. More impressive is the customer service. I've just completed my 4th order and have consistently received above average customer service. I've utilized both email & phone to resolve issues (issues that were totally if my own doing) & the response was timely & professional. I will be sure to continue using eTrailer & furthermore will definitely recommend them to others
by: Larry C.06/19/2014
I am using them for turn signal lights on a new trailer I pull behind my trike. They work great.
by: Warren W.04/27/2014
The product arrived on time and in good condition. The replacement product was as described and works well. The vendor was very easy to work with and kept me updated on all aspects of the transaction. I would have no problem recommending them. All in all, a positve experience.
by: Richard03/02/2014
You can not ask for anything better than how they delivered the products I ordered in a timely fashion...excellent selection & service
by: Joe R.11/07/2014
Lights are of excellent quality, and were packaged with care. Arrived pretty fast as well.
by: Stan 09/15/2020
Delivered fast and is exactly what I wanted.
Time will tell if the last on my boat trailer
by: Susan12/27/2020
Bright and uses less power. Fits within chrome metal guard snugly ;) very satisfied
by: Ron08/05/2020
look good.. haven't installed them yet.. only a 18 gage wire so we'll see..
by: Todd B11/09/2016
Lites are great. Price very good. Look awesome and fit perfectly.
by: Mike W12/19/2016
Looks good, LEDs are bright and easy to install.
by: Daniel03/16/2022
by: Martin 04/14/2021
by: Dan02/13/2015
Good product, Good service
by: Craig R.07/24/2013
Great Product. Will continue to use on future builds.
by: Hugh03/13/2013
Very sold and well built
by: Stephen 07/26/2022
by: Todd 12/15/2021
by: William07/10/2021
25
229
Show More Reviews
See what our Experts say about this Optronics Trailer Lights
- Available LED-Type Horse Trailer Rectangular Side Marker LightsThe link provided will show you all available rectangular LED-type trailer clearance lights. Most of these do have fewer than 12 LEDs per light. We do offer the Optronics Double Bullseye LED Trailer Clearance and Side Marker Light # MCL45AB which has 10 diodes and an amber lens; we also offer a red lens version, part # MCL45RB. We also offer a 14-LED amber light, part # MCL49AB. If your existing lights have a part number printed on the back of the housing or molded into the lens/base...
view full answer... - Availability of an LED Clearance Light Measuring 4 Inches by 2-3/8 InchesThe closest match we have is going to be # MCL45AB. It measures 4-1/16 inches across and 2-1/8 inches top to bottom. This makes it 1/16 inch longer and 1/4 inch shorter than the light you referenced. I have included a link to a video review of this light for you.
view full answer... - LED Amber Clearance Light Recommendation for an HMV FreewayThe ST31AB light used a 2057 incandescent bulb. There is no LED replacement available. The closest alternative is light # MCL45AB. This light measures 4-1/16 inches long, 2-1/8 inches wide, and 1-1/8 inches deep. It is a 10 diode light so it will be nice and bright for you.
view full answer... - How to Pick Out Replacement Clearance Lights for a TrailerThe SAE number on a trailer's lens isn't the most reliable way to pick out a replacement lens as that is not the part number for the light. The best solution I can provide would be to have you measure the dimensions of the clearance lights you have and then check out the link I attached that will take you to page that has all of our clearance replacement lights. You will want to closest dimensions to what you have from the filters and the best fitting lights would be listed.
view full answer... - Need Replacement Front Clearance Lights for 2000 Beaver Marquis MotorhomeThe best way to determine which replacement clearance light that you need for your 2000 Beaver Marquis Motorhome, is to locate a part number on the actual housing of the light, typically printed on the backside of the light. Typically numbers located on the lenses of trailer lights do not give the information needed to locate a replacement. The SAE part number that you found on the lens is just a number that means that lens has passed SAE guidelines and isn't the part number of the light....
view full answer... - How Does Optronics MCL45AB Double Bullseye Clearance/Side Marker Light GroundYou assume correctly, sir. The black wire provides power, and the lamp would ground via its mounting screws as is shown in the install video I've linked for your convenience. If the lamp isn't directly connected to metal that's in direct contact with the trailer frame, you'll need to run a jumper wire from the mounting screw to the trailer frame to complete the ground circuit.
view full answer... - Availability of Red and Amber Optronics Double Bullseye Trailer LightYes we do have a red version of the Optronics Double Bullseye with the part # MCL45RB. The amber version is part # MCL45AB.
view full answer... - Adding Side Marker Lights to Open Utility TrailerYes, side marker lights can be added to your open utility trailer. When adding these lights you will just need to make sure that you do not exceed the amp rating of the trailer wiring harness. In an effort to add lights to your trailer without exceeding the amp rating of the trailer wiring harness, I recommend going with an LED light like the Double Bullseye LED Trailer Clearance and Side Marker Light, # MCL45AB. This light draws a mere 0.087amps at 12.8 volts.
view full answer... - Availability of Optronics Double Bullseye Clearance Light with Black BaseThe Double Bullseye Optronics clearance lights like the # MCL45AB have 8 diodes not 10. For a black base you'd want # MC42AB.
view full answer... - Replacement Lens For Double Bullseye Trailer Clearance And Side Marker LightsI reached out to Optronics to confirm the fit for you. The amber replacement lens for your Double Bullseye LED Trailer Clearance and Side Marker Light, 1 Wire, 10Diode - Amber, # MCL45AB, is lens # A42AB in amber but we don't have just the cover in red.
view full answer... - Replacement Trailer Clearance Lights PM-108-15 SAE-AP2-79We have exactly what you need. For the amber lens light you would want the Oval Clearance Light part # MC38AB and then for the red light you would want the Peterson Red Oblong Clearance Light part # 423000.
view full answer... - Replacement Lens for Optronics Trailer Clearance Light MC31ABThe lens you need is # A31AB. It fits clearance light # MC31AB which is 4 inches long, 2-1/16 inches tall, and 1-3/32 inches deep overall. Optronics has an MC and MCL series but not just an M and the lens is not replaceable on the MCL version of the light so that is why # A31AB would be the correct lens.
view full answer... - Replacement Amber Lens for Oval Clearance Light on Horton Bumper-Pull Horse TrailerThank you for the photo of your horse trailer's oval clearance light lens. The lens markings are actually DOT references (not part numbers) but we can still help. Light part numbers are usually found on the base portion, not the lens, as shown on the photo I linked as an example. I linked for you our page for all replacement oval amber light lenses. These include the Peterson # 108-15A which appears quite close to your original lens. I also included a link to all oval, amber clearance...
view full answer...
- Replacement 194 Bulb Recommendation for a Trailer TaillightThanks for submitting the picture of the lights you are looking for. Based on that it looks like you are in need of a 194 bulb like the part # A194B.
view full answer...
- Which Optronic Replacement Marker Lights will fit in the Optronics Chrome Trailer Light BracketDouble Bull's-eye LED Trailer Clearance and Side Marker Light # MCL45AB and # MCL45RB will fit with Chrome Trailer Light Bracket # BK42CB. These two lights will be a little tighter fit. Double Bull's-eye Trailer Clearance, Side Marker Light # MC42RB and # MC42AB will also work with # BK42CB. I have linked a video for you as well.
view full answer... - LED Bulbs to Replace 194 Incandescent BulbsIf the light has an amber lens and you just need some replacement bulbs you can use # P340194A-360 for a pair of LED 194 amber bulbs. If you want to replace the whole light assembly with an LED version I would need to know which light you have. The model number may be on the light housing somewhere (not the lens). Or if the light number is not available then you would need to go by the measurements of the lights.
view full answer... - Replacement Lens Availability for a Tracker Pontoon Boat Trailer Clearance LightThe light the part # 108-15A is designed to fit is the # 423000 which I attached a dimensional drawing of. You would need to compare that to what you have to know for certain. Or another option to check out is the part # 34-59-012 as it sounds more like what you have.
view full answer...
- Replacement Lens Covers for my Trailer Lens Shows SAE-AP2-79SAE numbers aren't part numbers so it's hard to pick out replacement lights based on of them since that's not info that's stored as a cross reference. We've had customers with a similar number SAE-AP2-79 which turned out to be the # 423000 for red and then for amber part # MC38AB. For just the amber lens you'd need the part # A38AB. For just the red lens you'd want the part # A38RB.
view full answer... - Replacement Marker Lights for 1997 Sundowner Horse TrailerIf you are looking to replace the entire marker light, I have located lights that will work as an exact replacements for the PM-108-15. Oval Side Marker Light with Reflector - Red, # MC38RB Oval Side Marker Light with Reflector - Amber, # MC38AB These marker lights have one bulb. If you are just needing the replacement lens, the red lens is part # 108-15R and amber lens, # 108-15A.
view full answer...
Do you have a question about this Trailer Light?
Why etrailer.com?
At etrailer.com we guarantee:Real product know-how.
We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.Most detailed, accurate trailer light information available.
Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.Installations, made easy.
We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.Fast shipping.
Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.Personalized service for life.
We provide one-on-one, personalized service from the ordering process through the life of your product.Trusted since 1946.
We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.Returns Policy
Need to return an item? No problem. Please read our Returns Policy for more information.
Info for this part was:
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Video Edited:
Patrick B
Video Edited:
Chris R
Updated by:
Laura H
Updated by:
Wilson B
Updated by:
Brian T
Installed by:
Cole B
Installed by:
Randy B
Video by:
Zach D
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-496-5010
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.