6" x 3-1/2". LED light functions as an RV porch light or utility light producing light at a downward angle. Durable ABS housing and snap-in lens. Surface mount - hardware included. 2-Wire pigtail. 18 Diodes.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Speaker 1: Today we're taking a look at an LED amber RV porch light. Now, this light is great for an enclosed trailer or RV. It features an amber lens with a white plastic base. The lens is removable and can be replaced if ever needed. The light does have an angle to it, which points the light at a downward angle, so this light would be great to illuminate the area right outside your RV or enclosed trailer. It would also be great to illuminate stairs or a ramp, or any type of walkway.
It is a surface mount installation. It features a nice two wire design, so installation hardware as well as the wiring connectors are included. It does come with a couple wire nuts. The black wire is for power, white wire is for ground. It is designed for 12 volt systems and the power drawl is 0.12 amps.
It has the on and off switch located right here, so it's very easy to access and operate. It features a nice weather-proof design.Now, internally it features an LED chip, and on that chip are 18 LEDs, or 18 diodes which provides a really nice light output. Here at the end of the video we'll hook it up to power so you can see what it looks like with some power running to it. LEDs are great replacements for incandescent lights, especially as an RV porch or utility light because it does not produce near as much heat. With this light, even with it on for a long time you're not going to notice that it gets as warm as an incandescent light does.
LEDs also last longer, they burn brighter and they're much more efficient. With LED systems you don't have to worry about replacing bulbs and you don't have to worry about brittle filaments.Taking a look at the overall dimensions, and then we can hook it up to power. Starting with the overall length, edge to edge going this directions, it's about 6 inches. Edge to edge this direction is 3 1/2 inches, and the overall depth, that's how far it sticks out from the mounting surface, that measures right at 2 inches deep. The mount holes, there's four on here, so one on each corner.
Up and down they're separated on center by about 2 3/8 inches. Side to side they're separated on center by about 4 inches. You will need to remove the lens to gain access to those mount holes. The lens is easy to remove. I just like to press in on the actual lens and lift up, and then that's all there is to it. It's a nice, easy design, and then you place the tabs back in, push it until it snaps into place so you secure the lens back into the housing.We're going to go ahead and hook it up to power. Again, the white wire is our grand wire and the black wire is our power wire. Also with LEDs that have an on and off switch, you'll notice a very fast response time. So you can see here it sends out a bright consistent light. The multi-diode design really helps optimize the overall light output. Now, the light, or the color of the LEDs is actually white in color. What makes it amber is the lens. If we remove the lens you can see here that it's just white light, so you can take then lens off and replace it with a different colored lens if needed, or if desired.Now, when it comes to the brightness of the LEDs, we're looking at about 175 lumens, and the color temperature is 5,500 K. Again, nice quick response time with the on and off switch when it comes to LED systems.That's going to do it for today's look at the LED amber RV porch light.
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
Ratings & Reviews
This should of been a simple install but it is much more complicated than it needs to be with the internal screws of the LED plate and the silver backer plate and no place to stuff wiring.
This was a direct replacement for the LED switched light on my travel trailer. In my situation, the light was used by the sewer hookup on my Outdoors RV. Shipped next day.
Exact fit replacement for the hitch light on my Lance trailer. Easy installation. LED is nice and bright!
What an overpriced cheap POS light. It’s just an 1156 incandescent fixture with a 1156 socket LED bulb installed . The fixture is not waterproof/moisture proof in anyway not even a single seal around the lens itself. The lens most likely would not last any direct sunlight before any of the 3 small tabs that hold it to the steel backed fixture before the they become brittle and the lens just falls off parked or going down the road.
Appearance and quality is very low quality and would not recommend this product even if etrailer was giving them away free with orders
Have ordered many products over several years. From placing my order to receiving it, to my own installation. Every time e trailer performed to the highest standards. Product and service is always exceptional. So wonderful to work with a company that exemplifies customer service! Thank you!
The light was an exact replacement for the broken one that was on my trailer. I like the LED better than the 1156 bulb light that was on the trailer.
Excellent light. I recommend amber porch lights over clear or white LED's because they don't attract as many bugs. Would buy again.
Exactly what I ordered and delivered in a timely manner.
great product, fast shipment, good comm unication
Works well, easy install
Nice upgrade to the original light. Easy to install.
Installed easily works fine, but a bit dim.
Would like to see a deeper yellow color. Glad I have LEDs instead of the incandescent but it's a bit too bright. Maybe a frosted lens would suit the LED bulb better. Otherwise no complaints.
Light covers large area. Despite light being back ordered, etrailer staff kept us in the loop. Thank you.
Good light, fairly easy install, still working after a year. Aims the light slightly downward and light enough, but not glaring, so I'm not flood lighting my neighbors. Just what I wanted to replace OEM light.
The LED provides better outdoor lighting. Easy transition
Color of conductors is backward, no gasket, there is not enough room behind fixture for wires
Do you have a question about this RV Exterior Light?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.