4" x 2-1/2" x 1-5/16". Compact LED light illuminates the area at the base of steps or ramps. Durable aluminum hosuing. Surface mount. 2-Wire design. ADA compliant. Perfect for buses, RVs, enclosed trailers, or boats.
Features:
Specs:
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello everybody, this is Jeff at etrailer.com. Today we're gonna take a look at this Optronics 12 volt or 24 volt LED RV step area light. Now, this LED step light will illuminate a step well, or the area at the base of your steps, or your ramp. This is perfect for buses, RVs, and closed trailers, or even boats. The LEDs they use make great replacements for incandescent lights 'cause they'll last 50 times longer and they're more efficient. They provide brighter light with less power output, and of course, no bulbs to replace or brittle filaments that are gonna break.
And on LEDs, they do give you a lifetime warranty. Now this is a clear lens with five white LEDs, you can see here. And what I'm gonna do is hook this up to some power just to show you how bright it is. So once we get it hooked up here, we'll go ahead and turn on the power. And with the power on, you'll be able to see how the LED lights come on.
I'm gonna go ahead and turn off the overhead lights just to give you an idea how bright it is. You can see those five LEDs light up a pretty bright area. If we go, let's zoom back out, and then I can turn it here in the area and you can see how bright it is. So it gives a very large area. Then turn back on our overhead lights.
We'll zoom back in. Gonna go ahead and turn off our power. Now this is all in a die cast aluminum housing, which is rust-proof. Does have a nice white coating on it to protects against corrosion and damage that can be caused by UV rays. Now this is compatible with 12 volt DC and 24 revolt DC systems.
The power draw on this at 12.8 volts is 0.25 amps. Now, it is designed to surface mount to your RV or your trailer. The hardware to install it is not included. You can see it as a two wire pigtail. It includes both the power wire and the ground wire. And this light does meet the ADA lighting standards. Few dimensions on this. Overall length of it, if we go from one end to the other, is right at four inches. Width of it, the widest point right in the middle here is two and a half inches wide. When it's installed, the height of it from the bottom to the top is gonna be right about one and five 16th inches tall. And the distance between the mounting holes, you can see the two mounting holes right here. So if we go in the back center to center on those is right at about two and 15 16th inches. But that should do it for the review on this Optronics 12 volt, 24 volt LED RV step area light.
Nice ljght
Excellent
Do you have a question about this RV Exterior Light?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.