High-quality, tapered roller bearing is designed for high-speed use. Replacement part uses industry-standard number.
Features:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today, we're going to take a look at the replacement trailer hub inner bearing for 10,000 pound to 12,000 pounds AL-KO axle hubs. This is a high quality tapered roller bearing. It's designed for high-speed trailer use, and it's commonly used as an inner bearing on the AL-KO heavy duty 10,000 to 12,000 pound axle hubs. This does use an industry standard part number, which is stamped on here, of JM511946, and this is designed to be used with a matching bearing race of part number JM511940, which we do sell separately on our website. Now, the inside diameter on this, which is measured inside to inside, is going to be 2.559 inches. That should do it for the review on the replacement trailer hub inner bearing for 10,000 pound to 12,000 pound AL-KO axle hubs..
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
Ratings & Reviews
First one received damaged but etrailer sent me another one with no issues. Great customer service and pricing.
At least these were in a bag together.
I bought 4 inner bearings, 4 outer bearings, 4 seals and 4 cotter pins. These were the only ones that were in a bag together everyone else was loose in the box.
Needed to replace for EHB disc brake c onversion
Again how much can I say about bearings?
After traveling almost 6500 miles with these on my 1969 Yellowstone Camper, they still are good and no problems
They look to be a quality product. I would have liked the bearings and races packaged so they could be stored with out damage or a chance of rusting. Two of these sets are spares so I don't have to sideline a trailer for an extended period.
Great trailer hub assy, Will be using this hub to upgrade from a 6 lug hub to this 8 lug hub. Great price and excellent customer support.
4 NEW DRUMS 12 -2 INCH 8 LUGS. FOR MY TRAILER THEY ARE OUT OF ROUND FROM DAY ONE . IF I USED TRAILER I WILL GET THEM CUT.{ U HAVE GOOD PRICE.} BEARING OK.
fits my 1999 Kaufman 3 car wedge trailer with Dexter 12"x2" brakes 6k 7k lb axles 8 lug wheels
Exactly what I needed. Youtube showed me how to take out the old and put in the new bearings and races. They fit perfectly. The part no. was hard to research, but I was pretty sure what I ordered was the right set. I confirmed the part numbers when I beat the races out of the hub. The part number was embossed on the inside of the race and they matched the ones I ordered. I got them via ground delivery much sooner than they said. I received them in about three days and it only took an afternood to install them and new brakes. Can't beat the satisfaction of doing something yourself and saving hundreds of dollars in the process.
This was an order for replacement 40+ year old wheel bearing parts that had no identifying parts numbers. It was very hard to mach up, but etrailer provided enough information for me to locate the right parts.
The parts were deliver quickly with great communication and fit perfectly!
Thanks
nice bearings
I replaced all the bearings races seals and brakes on a small travel trailer. Bill P.at etrailer took my order and three days later I had everything in my hands. Great job Bill ! All the parts were exact replacements and the install went very smooth. There is video help on their website to show how to make the install easier. I have been dealing with etrailer for several years and have never had a bad experience. I was completely blown away by the pre assembled brakes . Backing plate, shoes, actuators, self adjusters and wiring all ready to bolt on. How much easier can it be? With the best prices, fast shipping and great help on line etrailer is the way to go.
I can say that etrailer is top notch when it comes to customer service. I had some question about the MORryde cushioned pin box as my 5th wheel gross weight falls between 2 different models. etrailer answered my question and the one they were unsure of they directed me to MORryde to get specifics. By no means does this reflect on etrailer but the shipping handled by UPS just flat sucks. I scheduled a day later than they originally wanted me to be available for delivery due to prior commitments. The next day 30 minutes after scheduled appointment I find out it wasn’t even loaded on the trailer. I decided to drive 3 hours round trip to just pick it up myself instead of dealing with UPS again. This won’t stop me from being a return customer, etrailer ROCKS!!!!
Easy to order from. Competitive pricing. Quality! parts. Fast shipping.
bought these bearings and seals approximately a year ago and installed them myself. I watched the instruction video etrailer has a just followed it. Everything went smoothly and we have put approximately 6,000 miles on them since the install. All is good.
The bearing seems ok, It was packaged loosely and shipping took 7 days. You should not use USPS for shipping.
Everything fit well
Finished my first bearing re-pack on our 369 this weekend. Order a set of bearings and seals in case of an emergency if needed. Quick delivery. Always happy with etrailer!
These work great! I would definitely buy them again.
Quick ship and right the first time! Bearings and races are excellent quality. Using on a 25K axle and should give years of service with minimal maintenance. Great pricing and quick delivery. Could not ask for more! Will use again and again.
Do you have a question about this Trailer Bearings Races Seals Cap?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.