Recommended Flat Towing Components For A 2020 Chevy Blazer

Updated 07/30/2024 | Published 07/27/2024

Products Featured in This Question

Roadmaster Nighthawk All-Terrain Tow Bar for Blue Ox Base Plate - Non-Binding - LEDs - RV Mount - 8K

(792)

$1545.00

etrailer SD Non-Binding Tow Bar for Roadmaster Direct-Connect Base Plates - RV Mount - 6,000 lbs

(305)

$850.34

Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles - 7-Way to 6-Way Coiled Adapter Cord

(3186)

$179.96

Roadmaster Direct-Connect Base Plate Kit - Removable Arms

(3324)

$575.00

Roadmaster Stop Light Switch Kit

(622)

$42.78

Roadmaster Battery Disconnect for Towed Vehicle w/ Flat Tow Brake System - Gas Only

(371)

$227.78

Roadmaster Direct-Connect Base Plate Kit - Removable Arms

(3324)

$670.00

Demco Stay-IN-Play Duo Flat Tow Brake System for RVs w/ Hydraulic Brakes - Proportional

(754)

$1175.00

Question:

I have a 2014 Winnebago view and want to haul a 2020 Chevy Blazer. What is the full set I need. Parts and part numbers please. Thank you

asked by: Dennis D

Expert Reply:

Hey Dennis,

I have the following recommendations for your 2020 Chevy Blazer:

Baseplate: For 2.0L Turbo models you'll want the Roadmaster Direct-Connect Base Plate Kit # RM28VR. For 3.6L engine models you'll want the Roadmaster Direct-Connect Base Plate Kit # RM-523204-5 instead.

Tow Bar: etrailer SD Non-Binding Tow Bar # e74ZR. This tow bar comes with safety cables included and has a built-in rise/drop to help keep it level between the motorhome and Blazer.

Tow Bar Wiring Kit: Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit # RM-15267. This diode kit will transfer your motorhome's traffic signals to the tail lights on your Blazer.

Braking System: Demco Stay-IN-Play Duo # SM99251. This system is a permanent install so once it's in place you shouldn't have to do anything else besides flip the switch on the controller on when you're ready to flat tow. It has an indicator light that taps into the brake light switch to display when the brakes re being applied in the Blazer. Since this wire isn't useable on your Blazer you'll need to install the Roadmaster Stop Light Switch Kit # RM-751483 for the brake signal.

The battery will need to be disconnected while towing so I recommend also installing the Roadmaster Disconnect Switch # RM-766 to make this process as easy as pressing a button.