bing tracking image
  1. Vehicle Suspension
  2. SuperSprings Intl
  3. Bump Stops
  4. Towing/Load Leveling
  5. Rear Axle Suspension Enhancement
  6. Standard Duty
THIS ITEM IS NOT A FIT FOR
2013 Toyota Venza
etrailer Installation
We'll connect you with nearby partnered installers who know this exact setup.
SuperSprings Intl

SumoSprings Solo Custom Helper Springs - Rear Axle

Part Number: SSR-130-54
In Stock
$437.99
Vehicle Suspension
Not Confirmed to Fit

2013 Toyota Venza

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
By submitting this form, you understand and agree to our Terms of Sale, Website Terms of Use and Privacy Policy.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

etrailer Installation
We'll connect you with nearby partnered installers who know this exact setup.
2,800-lb Capacity. Upgrade your vehicle's rear suspension with these maintenance-free helper springs. Sturdy microcellular urethane springs cushion bumps and help support a heavy load to level your ride and minimize sway. No-drill installation. Great Prices for the best vehicle suspension from SuperSprings Intl. SumoSprings Solo Custom Helper Springs - Rear Axle part number SSR-130-54 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (2553)
  • Q & A (0)
  • Photos

SuperSprings Intl Vehicle Suspension - SSR-130-54

Highlights

  • Custom Fit for Your Vehicle: Mounts to existing attachment points
  • 2,800-lb Load Support: Levels your ride under heavy weight for better steering and braking control.
  • No Upkeep Needed: No air lines or pressure checks—just install and drive, maintenance-free.
  • Smoother Ride Over Bumps: Urethane springs cushion jolts to cut bounce and harsh road impact.
  • Reduces Body Roll: Each spring works independently to steady off-center loads in turns.
  • Easy Bolt-On Fit: Installs with no drilling so you can upgrade your suspension quickly.
Made in USA

Features to know about

Level Out Heavy Loads: 2,800-lb Rear Suspension Support

When a full load makes the rear sag and steering feel light, these SumoSprings helper springs step in to keep things level. With a 2,800-lb capacity at 50-percent compression, they help your factory suspension handle the extra weight so your ride height stays even and your handling stays predictable. The springs compress progressively—soft on light loads and firm under heavy weight—so you get comfort when empty and solid support when loaded down.

Side-by-side comparison of installed SumoSprings on a vehicle rear axle, showing one compressed under load and one uncompressed to illustrate progressive load support and ride leveling function.

Smooth Out the Bumps: Microcellular Urethane Cushioning

Rough roads and trailer chucking can make every trip feel harsh. These springs are built from high-density microcellular urethane that cushions bumps and absorbs vibration like a built-in shock absorber. The material compresses vertically instead of bulging to the sides, so it fits tight spots without rubbing on nearby parts. Even with lighter loads, the spring’s soft initial engagement keeps the ride smooth instead of jarring.

Stay Steady in Crosswinds and Turns: Independent Spring Action

When a curve or passing truck tries to push you around, each spring works on its own to steady that side of the vehicle. This independent action helps reduce body roll and sway so you stay more planted through turns or uneven road surfaces. It also keeps off-center loads from leaning your rig to one side, adding confidence when driving in gusty conditions or over rough ground.

Install It Once and Forget It: Maintenance-Free Design

No airlines, compressors, or adjustments—just a simple no-drill install that bolts into place and gets to work. Because SumoSprings are closed-cell and permanently sealed, there’s no air pressure to maintain or leaks to worry about. They keep working through heat, cold, oil, salt, and UV exposure from -25 F to 200 F without needing attention down the road.

Specs

Weight and Capacity

  • Weight capacity (at 50-percent compression): 2,800 lbs

Warranty

  • Limited lifetime warranty
  • 30-Day satisfaction guarantee

SSR-130-54 SuperSprings Sumo Springs Solo Rear Vehicle Suspension Kit for Vans

Replaces SSR-107-54

Installation Details SSR-130-54 Installation instructions

This Product Fits The Following Vehicles




Customer Satisfaction Score:

Ratings & Reviews

4.7

2553 reviews
5 Stars
(2066)
4 Stars
(331)
3 Stars
(54)
2 Stars
(38)
1 Star
(64)
Review Sort Icon
by:
Very easy installation. The improvement in handling is phenomenal.
Gwendolyn Y. profile picture
Etrailer Expert

Gwendolyn Y.

4/23/2026

Thanks for the awesome feedback, Jeff! Love hearing that the install was a breeze and that you noticed such a big difference in handling, that’s exactly what you want after the upgrade. Really appreciate you sharing the photos too, it’s always fun to see the comparison.

by:
2018 Ford E-Series Cutaway
Will continue to show confidence in eTrailer. Always Our first go to.
Robert profile picture

Robert

8/13/2026

Amazed at the difference they have made. One year later and we still appreciate the difference.

Claire H. profile picture
Etrailer Expert

Claire H.

8/13/2026

@Robert I'm so happy to hear they've made such a difference for your ride quality! Thank you for the kind words and for the continued support :)
by:
After adjusting the “helpers” Moreride put on before Jayco build which were a challenge to get information to do these were added
Soft feel while absorbing dynamic loads
Aided the sway bars handling curves very well
Have blue set on my PU as overloads - nice
Greg profile picture

Greg

2/19/2026

Moreride helpers now doing their job Sumo’s were a great addition Panhard unit makes semi passing you 80 easier on corrections !

Kate F. profile picture
Etrailer Expert

Kate F.

2/19/2026

@Greg Glad we had the right part to help those white knuckles get some color back to them Greg! What adventure are you looking most forward to this year?
by:
Front & Rear Sumo Springs
Just installed the Sumo Springs I ordered and oh WOW!!!!! That is the finishing touches to my suspension on my 32 ft Class C on an E450 chassis and love the results. Bought our coach a year ago and installed Hellwig sway bars ( front & Rear ) Bilstien shocks and Safe T Plus Steering control and that made a huge difference to drivability but then decided to add Sumo Springs, Oh My Goodness with all that I’ve done our coach drive down the highways and byways rock solid. The sumos weren’t to difficult to install considering this ole man has had 3 back surgeries and 2 bad knees but we got it done and I was blown away on the test drive. I highly recommend the Sumo products.
Joseph profile picture

Joseph

5/13/2020

Still love the Sumos, they do their job. Class C is so much more a pleasure t drive even in wind and large semi trucks passing by, barely a wiggle. I would highly recommend these on any motorhome

by:
2025 Ford E-Series Cutaway
In combination with the rear sumosprings and helwig sway bars, the jayhawk is has even less lean when cornering. Need to wait until spring to see if it lessens expansion joint bumps. Gave a 4 star because the spacer did not fit, to tall
Bh profile picture

Bh

12/16/2025

Dont think I would buy them again. Went from Florida to Pennsylvania via i-95 and I never had such a rough ride. It was so rough a lens came off a ceiling light and I lost hubcap. Im debating upgrading the shocks to Bilstein and possibly removing the sumo springs.

Gwendolyn Y. profile picture
Etrailer Expert

Gwendolyn Y.

12/19/2025

@Bh Dang, I'm sorry to hear how everything went while using the Sumos. What kind of camper do you have?
by:
I Have a 21 thor fourwinds 31b execellent improvement
by:
Installed as advertised. Along with the front SumoSprings the side to side sway was eliminated on my Class C RV.
by:
Excellent product. Huge improvement to my RV ride quality and vibration reduction.
by:
Documentation can be improved.

Installation was fairly easy but I think I had to do it out of sequence from the directions. Removal of the OEM was cumbersome because the muffler bend got in the way. Once the OEM was removed, we dry fit the mounting bracket and started to thread on the nut when I tried to install the mounting bolt for the spring. No way. We then did a visual fit of the spring and spacer. Once we were sure both would fit, we removed the mounting bracket and assembled the entire thing before installing the bracket again. Worked out much easier. The driver side was more difficult due to a bracket being installed almost on top of where we needed to work.

Got the OEM out and followed the same procedures as we did for the passenger side. Driver side was more of the "blind" type of work. You could feel it, but not see it.

In the end, we needed ratcheting box end combination wrenches to get everything out and new stuff installed. The standard torque wrench worked fine but you'll need a pair of pliers to hold the mounting bracket while torquing the spring bolt.

All in all, both sides took about 1.5 hours. Well worth it because the ride is so much better with these installed.
by:
Installed on my 2020 Jayco Redhawk 29XK. Easy install. Front and back took about an hour. Worth it! Initial feel is the ride is smoother, haven't gotten out on a longer road trip - I will update when I do. Just the fact the Sumos make continuous contact with the axle where the OEM jounce bumper was there only when the suspension bottomed out means it should have a smoother ride
by:
2018 Jayco Greyhawk Motorhome
I found these springs while researching a towing question. I was more than impressed with portrayal of part, adequate info and glowing reviews. I was further delighted by speed of arrival and impressed with branding of the packaging. Top notch. Front and back installed in about an hour. Instructions are clear. I did find it easier to pre-assemble the stop to the bracket in order to determine if I was going to use the spacer or not. (I did). Note on this RV chassis, the bracket mount stud had to also clear an additional harness bracket. There was adequate threads for locknut
by:
Works as advertised. Less rear dragging and corners much better. Installed at home with no specialized tools in less than 2 hours.
by:
2021 Ford E-Series Cutaway
They ride too hard and I ordered the next size down..
SSR-130-47...
by:
The product was what I ordered and was delivered incredibly fast. Not only that I messed up and provided the wrong shipping street number but Joy (my etrailer sales person) followed up on the order and let me know when it was delivered so I could go the the address I put on the order and retrieve the package. Could not ask for better service all around. Thanks etrailer
Brooke M. profile picture
Etrailer Expert

Brooke M.

5/20/2025

...So you're saying you're a porch pirate? haha just kidding! Glad Joy was there for you in a pinch! Thanks, Craig

by:
Great product for improving ride & handling. Installed either the matching front counterpart
by:
2018 Ford E-Series Cutaway
Installed these on our 24' 2018 Sunseeker. Need small hands to get past the wiring and fuel lines in order to access the bolts to remove the old bump stops and install the new spring assembly. Insructions say to install the bracket first, then bolt on the springs. I found it easier to do the assembly on the work bench. I found there was enough space to install the entire assembly into position if the motor home was raised by the frame. I used thread lock gel on the bolts for added security. So far very pleased with the way the motor home handles on the road. No more sway on those twisty mountain roads. Also the rear skids no longer drag when exiting our driveway. On this short and relatively light motor home I did not find it necessary to use the spacers as this would have likely made the ride too stiff. Will recommend these to my sister who also has a Ford based motor home.
Ivan profile picture

Ivan

4/15/2022

SumoSprings are working just fine. Wished they would of provided a flat pad for them to rest on instead of the rounded axle housing they rest on now.

by:
2022 Ford E-Series Cutaway
Easy install on rear. I bolted the Sumos to the bracket before placing bracket on frame. Then, I jacked the vehicle frame up and installed. Passenger side a little tighter than driver's side, but job took less than 30 mins. I also used the spacer so the Sumos would be in contact and somewhat compressed upon initial install. They worked great and really made a difference in reducing the top-heavy sway. I had already installed Sumos on front.
Michael profile picture

Michael

1/31/2023

Good product. Still working as advertised. Probably one of the best upgrades we did to the RV.

by:
Honda Odyssey
I put these on the rear of my 2022 Entegra Odyssey 26M and they were a game changer. They really help with the swaying. I added the 500 lb springs to the from as well and it was a different world driving past or getting past semi trucks. I think these should come standard on RVs. I will never own another RV without these spring installed. I also added the roadmaster steering stabilizer that helped me go from white knuckle driving to chill driving with 2 fingers. All 3 of these things were adddd at the same time and it was like driving a completely different vehicle.
by:
Installed on:
2007 GMC 2500 HD Sierra Classic, Ext Cab 2wd, single rear wheels.

Simple and direct installation (just follow the instructions) and the provided videos.
Easier when the rear wheels are removed.

Upgraded front at the same time as the rear.
Been meaning to do this since 2015, when I installed a set on my shuttle bus.

Back to the 2500HD.

1. Rear sag/sway greatly reduced and it really showed its strength towing a 7500lb trailer to Georgia from MD.
2. Overall ride improved by my estimate by about 40%.

Highly recommend the Summo Springs.
by:
Fast shipping and product was exactly as described with great install instructions.
by:
SumoSprings really improved the ride on my 2018 Thor Axis 24.1
It is much easier to drive the twisty roads in the mountains with this product because the motorhome does not lean as much.
by:
The sumo springs in the front of my 2018 Thor 27.7 worked well. The ones on the rear did not perform as well as the front. I should have gone with the next better set.
by:
2021 Ford E-Series Cutaway
Made a tremendous difference in the back and forth motion on uneven surfaces and corners, my wife loves them!
by:
2019 Ford E-Series Cutaway
The ride on my E-450 Thor Quantum RV is soooo much better with the Summo Springs front and back. The Thor Quantum WS31 is a large RV and felt top-heavy from the first time I drove it. I installed the SSF-106-47's on the front and SSR-130-54's on the back. Along with the Bilstein steering stabilizer, this thing drives like a new truck. Very happy with the mods! I am also an etrailer.com fan. Ordered the rear springs on a Friday morning and they were at my door by noon on Monday. The etrailer staff provided updates including tracking number and status updates along the way. Great products and great service!
by:
2024 Ford E-Series Cutaway
I had a harder time installing the rear springs mainly because the documentation doesn't say what size socket is required to remove the old one. (FYI it's a 15mm on Ford e-series, which of course is not the same size that holds the front ones, and a size I didn't have). However, with my neighbors help, we got it done. I took the RV for a test ride after installing both front and rear and there was a vast improvement in the ride.

Visually I could tell the back end of the RV was not sagging as it did with the standard bump stops. In my case all the tanks - gas, water, grey, black sit behind the rear wheels. The Sumo's go a long way of correcting this less than stellar design.

IMO, Ford or at least any class C motorhome manufacturer should hinstall these at the factory.
25
2553
true
Show More Reviews

See what our Experts say about this SuperSprings Intl Vehicle Suspension

  • Best Suspension Enhancement & Steering Stabilizer For 2023 Jayco Greyhawk 27U
    Hi Jeff, I can give you a hand here with suspension upgrades for your 2023 Jayco Greyhawk 27U, though honestly I'd go a different route than the Timbrens # TFEF350 and # TFERSD you mentioned. They'll do their job, but my goodness they can be quite rough on the ride. They are made from a very dense hollow rubber so there just isn't much "give" there and you'll feel it. The better option is definitely SumoSprings because they'll compress based on the weight being transferred so it isn't...
    view full answer...
  • Parts to Improve Ride Quality on 2025 Jayco Greyhawk 27U
    Hi Ed; unfortunately, that is a pretty common problem with new motorhomes. The front and rear anti-sway bar are typically the best way to start so adding the Hellwig Front Anti-Sway Bar # HE26GR is a great idea. After that, I recommend a steering stabilizer. The Roadmaster Exact Center Steering Stabilizer # RM47MR will drastically improve steering and really cut down on fatigue. Since you have the rear anti-sway bar, do you have the JRide Plus package? That comes with the Koni shocks...
    view full answer...
  • Which SumoSprings Are Best for My Thor Freedom Elite 28FE on Ford E450 Chassis?
    Hello Mark, Based on what you described with the driveway angle and the additional weight you plan to carry on the hitch, I would recommend going with the SumoSprings Solo Custom Helper Springs - Rear Axle # SSR-130-54. The main difference between the two kits you mentioned is the density of the spring. The # SSR-130-54 is the higher-capacity version at 2,800 pounds compared to the # SSR-130-47 at 1,500 pounds, so it provides more support when the suspension compresses. In your case that...
    view full answer...
  • Question About SumoSprings Solo Custom Helper Springs SSR-130-54
    Hello Robert, thanks for reaching out. A SumoSpring kit like the SumoSprings Solo Custom Helper Springs # SSR-130-54 will definitely help absorb shock and reduce any jarring and chucking. The # SSR-130-54 you were looking at are a fit for the 2021 Ford E350 and E450. The only exclusion are Jayco models. What RV do you have? Reply below and let me know if you have any other questions.
    view full answer...
  • How to Improve Handling and Ride Quality of 2023 Jayco Redhawk
    Hey Jim, I like this question! So the biggest improvement you can make is with a rear sway bar which for that you would want the Hellwig part # HE78RR. Next up you'd want a front sway bar part # HE26GR. That gets you to roughly $1,000 so that's a good answer to first part of your question. Next you'd want to go with SumoSprings which for that you'd want the part # SSR-130-54 for the rear axle and then # SSF-106-47 for the front. With these and the sway bars you'd be at about $1,700 so...
    view full answer...
  • Which SumoSprings Kit Fits 2026 Thor Axis 24.1
    Hey Steven, yes the SumoSprings Solo kit part # SSR-130-54 would be correct fit for your 2026 Thor Axis 24.1 as well as the front kit part # SSF-106-47. Instead of MORryde did you mean J-Ride? If so, the front kits won't work .
    view full answer...
  • Which SumoSpring Kit to Fit 2012 Ford E-350 Cutaway Chassis
    Based on the chassis and your weight of your 2012 Ford E-350 cutaway chassis the SumoSprings you'd want the part # SSR-106-47-1 which has a 4,600 lb capacity. The part numbers you mentioned are for a truck chassis.
    view full answer...
  • Rear Suspension Enhancement for 2023 Gulf Stream Motorhome on E-450 Chassis
    Hello again Klara; to help smooth out your ride the best option is the SumoSprings Solo Custom Helper Springs # SSR-130-54 you were looking at. These help absorb those bumps you're experiencing so you will have a better ride quality. Since they work independently they also help compensate for any off-center loads like a kitchen or slide-out if your motorhome has one. I know you said you aren't experiencing a lot of sway but they will reduce the bit of sway you are experiencing as well....
    view full answer...
  • Suspension Enhancement For 2020 Forest River Sunseeker 2350 LE On Chevy Express 4500 Frame
    Hi Ernie! That 2018 Chevy Express 4500 Cutaway does look to be causing difficulties. I checked with all three manufacturers we carry (Air Lift, Firestone, and Pacbrake) as well as forums (Forest River, Sunseeker, and Chevy) and other manufacturers I could find on the web, but to no avail. It does not look like there are any air bag options for a 2018 Chevy Express 4500 (cutaway or cargo van) anywhere on the market, unfortunately. Would you consider an alternate way of supplementing your...
    view full answer...
  • SumoSprings Kit Recommendation for 2012 Ford E-450
    Hey Eric, I am sorry to hear about the issue you are having with the Hellwig springs but yeah I would agree going with a SumoSprings kit like the part # SSR-130-54 would be your best option. This will prevent the impingement and also give you the support you are wanting.
    view full answer...
  • Steering Stabilizer and Suspension Enhancement for 2022 Thor Chateau M25 350
    Hey Robert, we do have steering stabilizers that fit your 2022 Thor Chateau M25 350. We have the Roadmaster Exact Center part # RM47MR and the Safe-T Plus part # ST98MR which will both work great. Neither is a bad option but I really like the Safe-T Plus as since we know it works great and all of the components of the stabilizer are covered so there's less risk of it getting damaged. I prefer the SumoSprings kits over the Timbrens as the Timbrens are known to be a bit harsher. So for the...
    view full answer...
  • SumpSprings Bump Stops For A 2016 Forest River Sunseeker 2500TS
    I did some research and it looks like your 2016 Forest River Sunseeker 2500TS has a Dry Weight of 11,500 pounds and a fully loaded GVWR of 14,500 pounds. With that said, I recommend the following SumoSprings: SumoSprings Solo Custom Helper Springs - 1,000-lb Capacity - Front Axle # SSF-106-47 SumoSprings Solo Custom Helper Springs - 2,800-lb Capacity - Rear Axle # SSR-130-54 These will definitely give you a good amount of support. Are you experiencing a lot of issues with your suspension?...
    view full answer...
  • Timbrens or SumoSprings for 2016 Ford E-350 Motorhome
    Hey Wes, so for your 2016 Ford E-350 motorhome I would go with a SumoSprings kit part # SSR-130-54 over the Timbren that fits your motorhome as Timbrens are known to be pretty harsh and the SumoSprings are a lot more plush feeling.
    view full answer...
  • Troubleshooting Installation of SumoSprings Maxim Custom Helper Springs on 2022 Thor Vegas 24.1
    Hi Brett; the reason you are running into trouble is because the # SSR-106-54-1 does not fit Thor motorhome models for that E-350 chassis. Did you order these through us? I don't see an order under this email but you will need to return them to whoever you ordered them from. We have this listed in our tech notes as seen in the picture below. The only option that doesn't have the Thor motorhome restriction is the SumoSprings Solo Custom Helper Springs # SSR-130-54.
    view full answer...
  • Recommended SumoSpring Helper Springs For A 2019 Winnebago Outlook 27D
    Hey Steve, For your 2019 Winnebago Outlook 27D on a Ford E-450 chassis you'll want the SumoSprings Solo Custom Helper Springs - Front Axle # SSF-106-47 and SumoSprings Maxim Custom Helper Springs - Rear Axle # SSR-106-47-1. On the rear you will need to measure to see if there's 7 inches minimum of clearance from the sidewall of tire to frame in order for it to fit. If you don't have enough clearance then you'll need to go with the SumoSprings Solo Custom Helper Springs - Rear Axle # SSR-130-54...
    view full answer...
  • Will SumoSprings Solo Helper Springs Help With Off-Center Load On 2017 Thor Freedom Elite Motorhome
    Hey Steven! The SumoSprings Solo Custom Helper Springs # SSR-130-54 will definitely keep your 2017 Thor Freedom Elite from leaning to the side. Since they work independently they compensate for off-center loads from slide-outs or heavy kitchens to keep you nice and level. In addition to keeping you level they will also help smooth out your ride and reduce body roll when turning. These are designed to fit the following models: 22FE 23H 26HE 29FE 30FE If you have any additional questions...
    view full answer...
  • Front SumoSpring Kit that Fits 2022 East to West Entrada Motorhome
    Hey Randy, yes a front set of SumoSprings like the part # SSF-106-47 would be a really great option for your 2022 East to West Entrada motorhome. As far as a lift for the rear suspension that's not something we can really help with. Is the reason you want a lift to offset sag when towing? If so, a suspension enhancement kit might be a better option for you.
    view full answer...
  • Comparing SumoSprings Kits SSR-130-54 and SSR-130-47 for 2021 E-450 Class C Motorhome
    Between the two part numbers # SSR-130-54 and # SSR-130-47 the key difference is the amount of support each will provide for your 2021 Ford E-450 Class C motorhome. The 47 provides 1,500 lbs of additional support whereas the 54 provides 2,800 lbs. To balance support and ride quality I would go with the 47 over the 54 as that would be the less harsh solution.
    view full answer...
  • Should There Be A Gap Between The Axle And A SumoSpring Jounce Bumper
    Hey Jeff, SumoSprings do not need to be touching the axle when unloaded. Having a bit of a gap while unloaded is totally normal. Giving your axle a bit of wiggle room before engaging the jounce spring will give you a bit more of a comfortable ride. As you hit bumps in the road the springs will contact the axle and will have a softer progression instead of feeling like you're hitting a boulder in the road because their too close and already compressing. I have the 1,500lb SumoSprings...
    view full answer...
  • Recommended SumoSprings for Ford E350 Front and Rear Suspension Enhancement
    I'd be happy to assist. For a 2001-2014 E350 van model or 2015-2018 E350 Cutaway, I recommend the SumoSprings Solo Custom Helper Springs - Rear Axle # SSR-130-54 which have a 2,800 lb capacity at 50% compression. These springs progressively add more support as they compress do you don't have a rigid ride and yet have the support when needed. It will help stabilize your vehicle and reduce body roll. You could alternatively use the # SSR-130-47 which have a 1,500 lb capacity. I've linked...
    view full answer...
  • SumoSprings Compatible With Hellwig Helper Springs On a 2021 Ford E-450 Class C Motorhome Chassis
    With having the Hellwig helper springs on your 2021 Ford E-450 Entegra Class C Motorhome it will limit you to 2 kits from SumoSprings. The only difference in these kits is going to be the color of the springs which defines their weight capacity. Yellow SumoSprings Solo Custom Helper Springs # SSR-130-54 2,800lb capacity Black SumoSprings Solo Custom Helper Springs # SSR-130-47 1,500lb capacity
    view full answer...
  • SumoSpring Kit that Fits 2018 Ford E-450 Motorhome Chassis
    Hey Scott, so we do have the SumoSpring Solo kit part # SSR-130-54 that is a confirmed fit for your 2018 Ford motorhome built on an E-450 chassis.
    view full answer...
  • Front And Rear Suspension Enhancement Kit For 2021 Thor Axis Motorhome On E-350 Chassis
    I can certainly help you find an upgraded suspension option for your 2021 Thor Axis Motorhome on a Ford E-350 chassis. For your front suspension, go with SumoSprings Solo Custom Helper Springs # SSF-106-47. For your rear suspension, go with SumoSprings Solo Custom Helper Springs # SSR-130-54. These suspension enhancement kits will drastically reduce body roll and sway while also absorbing bumps, resulting in a smoother and more level ride. A really nice feature that these jounce springs...
    view full answer...
  • SumoSprings Solo Custom Helper Springs - Rear Axle Item # SSR-130-54 Height
    I checked with SumoSprings and they told me without the spacer the # SSR-130-54 is 5 inches tall and with the spacer is 6 inches tall.
    view full answer...
    Image 1 for


< Previous



Do you have a question about this Vehicle Suspension?


Info for this part was:

Employee Leah B
Edited by:
Leah B
Employee Andrew K
Video by:
Andrew K
Employee Joshua S
Video by:
Joshua S
Employee Daniel D
Video by:
Daniel D
Employee Jeff D
Installed by:
Jeff D
Employee Robert C
Installed by:
Robert C
Employee Jameson C
Expert Research:
Jameson C
Employee Jacob T
Video Edited:
Jacob T
Employee Dustin K
Video Edited:
Dustin K
Employee Jonathan Y
Video Edited:
Jonathan Y
Employee Mary K
Written by:
Mary K
Employee Wilson B
Updated by:
Wilson B
Employee Alex H
Updated by:
Alex H
Employee Noah M
Updated by:
Noah M
Employee Ryan G
Test Fit:
Ryan G
Employee Bradley B
Test Fit:
Bradley B

At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.