To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
6,000-lb Capacity. Great for trucks with plows, these front hollow rubber springs help to stabilize and level your vehicle. They also provide a more comfortable ride by absorbing road shock and improving roll stability. Easy to install and use.
Features:
Specs:
Just like the rear of your vehicle will sag under the weight of a fully loaded bed, the front of your vehicle will sag when under the burden of heavy equipment such as a snowplow. In this case, the front axle is handling not only the weight of the equipment, but also more of the vehicle's weight. Overall vehicle handling - traction, steering, and braking - is negatively affected. But the resistance from Timbren's Suspension Enhancement System works with your factory suspension to keep your vehicle level and improve your driving experience.
The Timbren system comes with custom-fit brackets that are bolted onto each frame rail above your front axle. Hollow rubber springs are bolted to the bottom of the bracket and hang down so that the bottom of each spring touches the axle. Because each spring is making constant contact with the axle, it is always working to cushion and support your factory suspension.
Timbren Suspension Enhancement Systems are designed to work progressively. When the hollow rubber springs are compressed, the convoluted design causes them to quickly collapse along the folds. Once the folds are compacted, the stacked barrel shape increases resistance, stiffening the suspension and keeping your vehicle level.
Each hollow rubber spring works independently to support the driver's-side or passenger's-side of your vehicle. This is helpful when you swerve or make sharp turns. Each spring is activated when it is needed, so body roll is greatly reduced. The independent action also works well when you're carrying off-center loads.
Timbren's Suspension Enhancement System will help raise the front end of your vehicle when you're using heavy equipment like a snowplow. This ensures that your headlight beams will be pointed in the right direction and tire wear will be reduced. If the plow is off-center or has an extension, the springs will automatically compensate for this as well.
Another great feature of the rubber construction is that the springs absorb most of the road shock, creating a smoother, more stable ride overall. Wear and tear on the factory suspension is also lessened because the rubber springs work to prevent bottoming out on rough roads.
Timbren's Suspension Enhancement Systems are much easier to install than air springs - there are no air hoses to run, no compressors or gauges to hook up, and no manual adjustments to make. The rubber construction makes Timbren's springs more elastic than similar products constructed of microcellular urethane. More elasticity allows for a more comfortable ride because the rubber has more travel.
Average Customer Rating: 4.7 out of 5 stars (6498 Customer Reviews)
6,000-lb Capacity. Great for trucks with plows, these front hollow rubber springs help to stabilize and level your vehicle. They also provide a more comfortable ride by absorbing road shock and improving roll stability. Easy to install and use.The Timbren ses went on easy and worked like a charm. Thanks so much.
this product is great! I put everything on like the instructions said,the ride was a little stiff so I jacked the back of my 3/4 ton back up took the 1 in.rubber disk off.now the ride is perfict.thank you!!!!!!!
Product worked as described. Very easy installation for one person.
easy installed !! have not take pickup out and test it with enclosed trailer.
Works well. Pain to install but does the job. Don't attempt to install without air impact
Great product, but I had to go buy my own hardware to mount ,the nuts that came with kit would not fit the bolts way too big.
Very fast delivery, good product, worked as advertised. It solves the sagging when my trailer is hitched.
Superb. Exactly what was needed.
RV handles curves much better then before, more solid handling.
So far everything is working. Just as I though. The only complaint I have is the wait time that it took (12) days from the order date to when I receive the item.
Really makes a difference when hauling a heavy gooseneck.
These are exactly what my truck needed for the heavy loads I put into the bed.
nice ride with my 5th wheel
I have not put any weight on it yet so that will come later. I have a 2007 G.M.C. 2500 H.D. and I pull a 40 foot Big Horn Traveler. What I want to talk about is the install. It was quick only took about a hour. Take the tire down and start. Had no problems it went just like the video showed. I did not use the big washer I didn't have enough room.I have about 1 inch of travel before they come in to play so ride is the same.
Takes the sag out for a bargain, but not as good as real springs
Super easy to install. After reading several reviews about this product and how folks went about installing, found that I just needed to remove just one of the U-Bolts and just barely loosened the second. Replaced both in about 30 minutes. Shipping was quick and was exactly what I ordered. Reviews were helpful and will definitely use etrailer again.
Shipping was so efficient arrived days before estimated. Order was placed and within an hour was shipped!!!
Bump stops I bought from you are way bigger and so much better than oem. Only took less than 30 minutes to install. It was very easy to install.
great delivery time. I received them this afternoon and installed them in about an hour. thanks to the video that showed everything step by step. thanks for a great product. I think this is just what we needed to help haul our camper and pull our car hauler at the same time. thanks again
They look as shown on the home page
Fast service
Product fits as described. Will try out when I tow my travel trailer in a few weeks.
Great product, easy to put on. It took less than 45 minutes to put the new Timber butt stops on. Only thing I would request is to tape up the box they cam in, because by the time it travels to your location it’s beat to hell and back. Like the last time I ordered the ones for the front, all the parts were missing. Luckily this time all items were still in the box.
Came just as advertised. Waiting to install. As an aside: You might want to make sure all box sides are securely taped as the USPO delivered the box with the un-taped side completely pulled away from the box and the suspension parts were pushing out of the box.
Do you have a question about this Vehicle Suspension?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.