Air Lift LoadLifter 5000 Air Helper Springs - Rear Axle
This item does not fit your vehicle
2007 Chrysler Aspen
These items fit your vehicle
2007 Chrysler Aspen
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
When you’re hauling heavy gear or towing serious weight, sagging rear suspension can throw off your steering, braking, and headlight aim. The Air Lift LoadLifter 5000 air helper springs add up to 5,000 lbs of load-leveling support to keep your vehicle riding level and stable. With even weight distribution across all four wheels, you maintain safer handling, better braking performance, and a more controlled feel when the load gets heavy.
Every trip is different, and the LoadLifter 5000 makes it easy to dial in your setup. Each air spring can be adjusted from 5 psi to 100 psi, letting you fine-tune for a firm, stable ride when loaded or a softer feel when running light. Inflate the springs independently to correct off-center loads or side-to-side lean. With manual inflation valves and air lines included, it’s straightforward to set pressure where you need it and keep your ride balanced mile after mile.
Heavy loads can strain factory suspension components, but these air springs take the stress off. Each bag is built from 2-ply, fabric-reinforced rubber with high-strength Zytel nylon endcaps that won’t rust or corrode like steel. Air Lift’s exclusive upper and lower roll plates protect the springs from damage while also boosting their load capacity. The result is long-lasting support that stands up to rough roads and hard work without leaks or premature wear.
Upgrading your suspension doesn’t have to be complicated. The LoadLifter 5000 kit comes with mounting brackets, hardware, air lines, and manual inflation valves for a clean install. Just mount the springs, connect your lines, inflate, and you’re ready to go. You can also add a compressor system with in-cab gauges (sold separately) for convenient pressure adjustments on the fly. Built for heavy-duty use, this setup keeps your suspension performing at its best no matter how demanding the haul.
Customer Satisfaction Score:
89% were satisfied with this product
11% of customers were not satisfied
Ratings & Reviews
I can’t believe how much putting these rear springs on my 2021 Jayco Alante Class A has helped the whole suspension and ride.
We took the RV all the way to Alaska through AB, BC, and Yukon Canada. I started with low pressure at 60 psi to see how it performed but ended up having the air set at 80 psi. I would definitely recommend these to anyone with a Ford F-53 suspension who struggles with the ride and comfort.
I just completed the install of this Airlifter 5000 series air bag kit. First, the kit, without a doubt, is a high quality kit with many of it's components designed specifically for specific vehicle application. I installed it under the rear of our new-to-us 2021 Ram 1500 Crew Cab Laramie 4x4 Ecodiesel. I was very pleasantly surprised by the nice and robust powder coating of the metal mounting plates. That means protection for them for a long, long time. The hardware/fastners were/are of decent quality also. And, while the "springs" used for the temporary carriage bolt retention in part of the install are a good idea, I have maybe a better way of doing that. In my opinion, for whatever that's worth, here's a suggestion.
Since there are TWO of those carriage bolts that have to be installed AT ONE TIME, you now have to deal with those two long tailed springs, carriage bolts that continue to fall backwards into the abyss of the frame, all the while trying to maneuver the frame mount plate into position. Then, trying to retain tension on the tails of those springs that retain the carriage bolts, and align the bolt tips to enter the mount plate, and then, if and or when you get the mount plate into position and both bolt tips are protruding through it, you now have to hold ALL of that in place, while you remove at least one spring so that you can now grab a nut (a feat unto itself) and fit it onto the tip of one bolt, all the while trying to hold tension on that bolt so it won't fall backwards into the frame and start threading it.
Then, once it's threads are started, you can no concentrate on the same operation for the second bolt. What a serious pain in the petute!
But instead of the springs and tails to be used to retain the bolts while prepping to install the mount plate, you use whatever their called, a very, very thin retainer clip or washer or "push clip" (I really don't know the name of them) that are used to retain the drums onto hubs on an axle, ALL THOSE PROBLEMS would be over.
You'd simply use the springs as before to load and pull the bolts through their respective holes as before. Now, with the one bolt in place, reach through the center hole in the frame that's between the two bolt holes and using a finger, push on the head of that installed bolt. Your finger will now hold the bolt in place. Now, with that bolt held in place, you can remove the spring. Then, PUSH the very thing spring clip right over the threads of the bolt and it will "ratchet" down the threads until it bottoms out against the frame. You have now LOCKED that bolt in place and you can let got of it with your finger and that bolt isn't going anywhere!!!!!!!!
Now, do the same for the second bolt. Now, both bolts are held firm in place WITHOUT the long and cumbersome tails of the springs. You can now grab the mount plate and push it up into place and over both exposed sets of threads at the same time WITHOUT FEAR of pushing the bolts back into the frame. You can now hold that mount plate in place while you grab one nut at a time and thread it all the way on. Then do the same for the other nut.
To me, this would be waaaaaaaaaaaaaaaay easier than the method you (and I, and any installer, be it a shop or a home install) are presently using. If I had a link to what kind of clip I'm talking about, I'd link it.
But, those clips are seriously thin yet are quite capable of retaining those bolts and will not hinder the mate-up of the mount plate to the frame sides. Sure seems worth a looking into to me. Just a suggestion.
Scott
These were a great addition to my truck. I moved from Washington to Michigan 1 year ago. Heavily loaded trailer and truck. No sag, no issues. Full disclosure I had to get some custom U bolts made because of my setup, but I have had zero issues. Great buy.
I plumbed my airlines through the license plate which turned out to be very handy.
I didn’t do the install myself. However my mechanic talked me into these after adding a rack and rooftop tent to my ‘14 Tacoma. Absolutely Fantastic. I have a 3” suspension lift and the truck handles as near to stock as I can remember. Awesome product. Easy install (according to mechanic). Thanks all. Oh yes, one issue because I added a leaf spring when I lifted it. He had to find new shackles to allow for fit. FYI
Install on a 2026 F350 SRW. Love the product and have zero issues with that itself. The reason for the 4 star is the clearance with the factory sway bar and brake lines. It does mention that in the instructions, however it's extremely tight and I'll definitely be checked for rubbing in the future to make sure I don't have clearance issues. Otherwise, they work great paired with the Airlift WirelessAIR compressory system, zero complaints on the usability of the product.
Took my time and followed included instructions exactly. Went together well! Haven’t towed with them yet, but definitely raised the back of my Tacoma with 26 lbs of air pressure that I tested for leaks with! Feel like they’ll be a big improvement when towing our 4200 lbs. camper!
Very easy step by step instructions, how to install.It took me about two hours in my driveway. I got it because I haul a 35' travel trailer. Makes the ride a whole lot smoother
a very good choice. The F150 did not have enough stock suspension for my 24 foot trailer with a GVER 10,000lb. Now we all know the truck will pull that weight but when you hooked up it squatted.After installing the air lift it does not squat any more and the truck with a 5.0 has enough power to pull the weight. I had Monroe air shocks on it before but they would not do the job. I am very happy with the setup. I replaced the Monroe air shocks with Rancho shock's and the ride is amazing with or with out the trailer. This was a great investment for the long haul.
Watched the install video twice before the shipment got here and had no problems installing it. Also installed the WirelessOne from Airlift at the same time. Picked up some 1/4" clamps to make the air lines look a little cleaner, and hold them in place during our snowy and icy winters. Including the WirelessOne system, it took about 8 hours from the time I washed the underside of the truck until I rolled it back out from the garage. Pulled the camper this morning and all my old issues have disappeared. Truck is level, trailer pulls great, and the cooling system is back to working as needed. Highly recommend this suspension kit!
Im very impressed with these airbags. So far they are doing the job.
These come with all hardware and instructions. I put 20 psi with no load to see how long the air would hold up. 2 weeks later im now at 15 psi which I'm satisfied.
The previous bags of another brand didnt hold air well even with no leaks.
I can tell the difference in ride quality. I've loaded the bed with landscaping materials and towed my boat with 15 psi and still holding strong. Looking forward to towing my Travel Trailer.
Customer service has also been great!
Perfect fit easy install
Better ride with my transit van.
just as expected
It’s neat and not that hard job to installing it.
Can't wait to get this installed. My Harley Tri glide is heavy, and this will make it easier to pull on my trailer.
Have used air lift products before. Great product, well designed and engineered.
I installed the Air Lift LoadLifter 5000 Air Helper Springs on my 2018 Transit 350 extended and they work well. I also have the Air Lift WirelessAIR Compressor System. The van extends so far behind the rear axle that it is easy to drag the trailer hitch when driving through a dip. Now I can press a button on the remote and raise the rear of the van 3".
Very satisfied. I operate a 2016 Ford Transit 250. My normal operation weight is about 8500 LB. I only have to set the bags to 25 psi to achieve the desired ride. Installation was simple. I recommend removing the rear tires when installing if you dont have a lift.
The air bags went in great, and pretty easy. I did not like the recommended location for the air valves. So I put them through the body panels to have them inside the back doors. They work great like that. I just put in a 7/16” grommet in the panel to run the air line through the outside panel. Works great and easy to fill with air.
I installed the airbags on my 2015 Ford Transit to help with the heavier weight after converting it to an RV. The airbags were fairly easy to install. All the parts were included with the kit. I chose to use the manual inflation option by running the air tubes to the back of the van and mounted the fill valves under the bumper. There is a noticeable difference in the sway of the van going around corners and the sag in the back of the van when fully loaded. It's easy with a bicycle tire pump to adjust the firmness of the airbags. A great addition to the safety of the van.
Do you have a question about this Vehicle Suspension?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.