Install Ride-Rite air springs on a lifted vehicle with these lift spacers. Spacers attach between the bottom of the lower bracket and the bottom of the spring on vehicles with a 4" lift. Kit fits air springs that mount on the axle.
Features:
Specs:
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello, everybody. This is Jeff at etrailer.com. Today, we're gonna take a look at the lift spacers for the Firestone Ride-Rite Air Helper Springs on vehicles that have a four-inch lift. Now, these will install your Ride-Rite air springs on a lifted vehicle using these lift spacers. These will fit the Firestone Ride-Ride kits, part number F2286 and part number F2350. Basically, these spacers are gonna attach between the bottom of the lower bracket and the bottom of the spring on vehicles that have a four-inch lift.
Now, the spacer itself must be the same size as the lift kit rise, and the distance between the upper and lower brackets on the vehicle must be between 9 1/2 and 10 1/2 inches. It will include everything shown here on the table. It includes the two lift spacers and all the hardware necessary for installation, and these lift spacers do fit axle-mounted air springs. But that's gonna do it for a look at the lift spacers for the Firestone Ride-Rite Right Air Helper Springs on vehicles with a four-inch lift.
Better then Pictured! I initially installed my Firestone Bags without these spacers but quickly learned that I was going to need them due to my F250 having a 6" lift. I bought the 4" spacers due to the measurements from my bottom bracket to my top bracket between the bag and it is perfect now. The items in the product description kinda look weak but trust me, these things are big and meaty and extremely well built.
Heads up for everyone ordering...
You will always see descriptions for these as either axle mount or leaf mount. Well... my Firestone kit is actually installed to the side of the leafs and the bracket slides over the bottom jounce stop. I went ahead and got the axle mount spacers but knew I was taking a risk. I made it work though and both spacers went in in about 30 minutes.
When I installed the spacers I just made sure to use some locktite on my bottom bolt. The entire setup feels VERY sturdy so I'm not worried about it at all. As always, Etrailer support was fantastic.
They are built of great quality and seem very strong however, I was unable to utilize them for my airbag install. Even though I installed an 6inch suspension lift on my 2006 Dodge 3500 2wd, the lift is misleading. I installed the airbag plates and measured to get an accurate measurement. According to the measurements, I required the 2in spacer for the bags and they were of the same quality as these. Great product!
My vehicle is a 2003 Ford E350 4X4 Sportsmobile. The product quality is excellent but the 2061 kit required a lot of workarounds, cutting and drilling. When it looked like the 2061 would not fit, I had to call Firestone. The tech said that I needed a 4" spacer from Firestone. It took two of us 3 days to install the first air bag. Hopefully, the second will take less time as we are working outside.
Very Pleased
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.