Yakima BaseLine FX Roof Rack for Naked Roofs - JetStream Crossbars - Aluminum - Black - Qty 2
Item # Y85VD
Our Price: $733.80
Confirmed to Fit
2013 Toyota Tacoma
Access Cab
Double Cab
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
- All Info
- Reviews (38)
- Q & A (0)
- Videos (4)
- Photos
Yakima Roof Rack - Y85VD
- Aero Bars
- Crossbars
- 44 Inch Bar Space
- Yakima
- Black
- Flush
- 2 Bars
This aerodynamic, flush-mount roof rack lets you carry gear and cargo on your vehicle while maintaining a clean, factory look. Crossbars work with channel-mount and clamp-on accessories. Installs on your vehicle's naked roof.
Features:
Yakima BaseLine FX LG:- Integrated crossbar and tower system lets you carry cargo and accessories on your vehicle's naked roof
- Flush design provides a streamlined, factory look - no crossbar overhang
- JetStream crossbars with top channels accommodate channel-mount and clamp-on accessories
- Push-down rubber strips in top channels allow for easy attachment of channel-mount accessories
- Sleek towers with matte finish are weather resistant
- Custom installation to your vehicle's naked roof with Yakima BaseClips
- Aerodynamic, lightweight aluminum crossbars resist corrosion and reduce wind noise
- Yakima Same Key System (SKS) lock cores (sold separately) deter theft
Yakima BaseClip 125:
- Custom-fit mounting clips and pads allow you to mount BaseLine towers on your vehicle with a naked roof
- Padded, stainless steel clips provide secure grip on your door jambs
- Snap onto DropHooks inside towers
- Protect door jambs from scratches and abrasions
- Powder coated for durability and rust resistance
- Molded rubber pads fit the contours of your roof
- Clip onto bottoms of towers
- Protect roof from scratches and abrasions
Yakima BaseClip 128:
- Custom-fit mounting clips and pads allow you to mount BaseLine towers on your vehicle with a naked roof
- Padded, stainless steel clips provide secure grip on your door jambs
- Snap onto DropHooks inside towers
- Protect door jambs from scratches and abrasions
- Powder coated for durability and rust resistance
- Molded rubber pads fit the contours of your roof
- Clip onto bottoms of towers
- Protect roof from scratches and abrasions
8006125 Custom Base Clips and Pads for Yakima Base Line Towers
8006128 Custom Base Clips and Pads for Yakima Base Line Towers
8000167 Yakima Base Line FX LG - Roof Rack Cross Bar for Naked Roofs
Video of Yakima BaseLine FX Roof Rack for Naked Roofs - JetStream Crossbars - Aluminum - Black - Qty 2
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Yakima Roof Rack Review - 2019 Toyota Tacoma
John: Hey guys, John here from etrailer.com, and today we're installing the Yakima JetStream Crossbar System on our 2019 Toyota Tacoma. This is a great way to add more carrying capacity to our vehicle if our truck bed is all loaded up, or maybe we don't want to add a cargo carrier to the hitch and extend the length of our vehicle. It is a great option for us.The JetStream bars come in both black or silver. So as you can see our Tacoma here is black, so the black finish looks really good. If you have a different color, silver might be better for you. We have that as well.
Our Tacoma here has a bare roof, and so we do use the clamping system for the installation. This would be the same for any other roof rack out there. I will say that the BaseLine towers, they have a little bit more of an involved installation. It's not really difficult, just a little more time consuming, but I do feel like it has a much better fit compared to other roof racks out there.One of the best features of this roof rack of the crossbars here is this rubber strip. A lot of other crossbar systems, you have to cut that to fit your accessories.
With this system, we simply remove the end cap. Then we press down the rubber strip, and our accessories slide on here so we don't have to cut any rubber strips, and it still helps cut down on that wind noise and drag.This roof rack has a 165 pound weight capacity, which should be plenty for any accessories you'll be carrying, and the BaseLine towers here, you're able to put lock cores in to match other Yakima accessories, so you're only using one key for everything. The JetStream bars are aerodynamic. As you can see, it kind of tapers here at the end, which does also help cut down on wind noise and drag compared to other models, especially the older square or round crossbar systems. Now that we've gone over some of the features, let's go ahead and install this together.To begin our install, I recommend taking all the different components and laying them out on a clean working surface just so it's easier to keep yourself organized and to find the parts when you need them.
You'll have instructions included with your BaseClip kit and with the BaseLine towers. The BaseClip part, the instructions that come with that are going to be more measurements and where you're going to put them on the roof. The BaseLine towers are going to be a little more useful for the actual install.To start off, we will remove our cover here. There are two points at the top that you pinch and you rotate it down. Then we'll pull this gray tab out which reveals the head of this bolt here.
We'll place this plastic piece in the seat till it clicks, and then we're going to install the T bolt here. We'll place it in that cavity, flip it over, and we use our tool to tighten this down. You don't want to torque this down all the way because the next step is to flip our crossbar over and install the BaseLine foot onto the crossbar.If you flip your crossbar over, you can see here there is an arrow that points one direction. That means that's the direction that the vehicle is going to face, which will be important when we adjust our feet later. But for now, let's get our foot pack on the bottom of the crossbar here. We'll slide these two black tabs and our T bolt into the T slot here underneath. And on the bottom side of the crossbar there are measurements here. If you look in your instructions, it will tell you how far apart your feet need to be spaced, and you can use this to help get you pretty much right on point.Once you have your BaseLine feet where they need to be on the crossbar, the next step is to adjust the inner bolt here. The arrow that I pointed out earlier on the crossbar, you'll refer to that to find out which of these locations is going to be considered A, B, or C, and then look in your instructions for the BaseClip to make sure you have it adjusted correctly. Once we get this in the correct position, go ahead and tighten this down until you hear three clicks from our torque wrench here. There we go.Now with the first bolt tightened down, we will take the rubber foot pack and put it on the bottom of our leg. Be sure that this opening faces towards the outside of the vehicle, and press down. You'll hear the audible clicks. Then we make sure that the indicator is lined up with the correct tick and tighten this down until we hear our torque wrench click three times. The last step before putting our crossbar on top of our vehicle is to put the end cap on our crossbar, and be sure that this tab here sits on top of the T slot and not inside of the T slot. Repeat the same process for the other feet. Make sure you're consulting your instructions for each one, and then we'll place our crossbars on top of our roof.Yakima does include some stickers and a tape measure with your roof rack kit. So I do recommend taking the stickers to mark which feet are for the front of your vehicle and which are for the back, and then you can use this to help you figure out exactly where your towers need to be. You will install the front crossbar first. So with our front crossbar already installed and where it needs to be, you measure from the front of that crossbar back to the front of your rear crossbar and then adjust it to the specs. This will be the N4 00:06:12 measurement in your instructions.Now that we have our roof rack where it needs to sit, let's open up this gray cover and then we will install the clip here. There is a slot for right under here this bracket that we slide this under till you hear it click. And then we will go and start making a few adjustments with this bolt and this bolt. This bolt here swings the arm down, so we'll just that until it's making contact with the roof, and then this bolt here will bring the clip up into the door jamb. I would like to point out, make sure that the rubber piece here at the bottom of your foot pack, there's kind of a ridge on it. Make sure that's seated properly. The first time I put this on, wasn't making sure of that and it messed up the other side where it sits. Now, it is important not to torque this down yet like you we're hearing the clicks. Just get it snug, and then we'll go over to the other side and put that clip on as well.So we went over to the passenger side and got that clip all snugged up. Now let's go ahead and torque down both of these bolts we we're first messing with. Again, you'll twist it until you hear the three clicks. We'll torque that one first and then we'll torque the lower one. Place our gray cover here. Just take these hooks, put it here at the bottom, and rotate it into place.With all of our covers in place, that completes the installation of the Yakima JetStream Crossbar System on our 2019 Toyota Tacoma. Now we're ready to toss on any accessories that we need and we're ready to hit the road.
Customer Reviews
Yakima BaseLine FX Roof Rack for Naked Roofs - JetStream Crossbars - Aluminum - Black - Qty 2 - Y85VD
Average Customer Rating: 4.8 out of 5 stars (38 Customer Reviews)
This aerodynamic, flush-mount roof rack lets you carry gear and cargo on your vehicle while maintaining a clean, factory look. Crossbars work with channel-mount and clamp-on accessories. Installs on your vehicle's naked roof.by: Paul08/16/2023
Ackage came 2 days early the install was somewhat easy (did it by myself)
Did not get to mount anything to it but seems really sturdy. One thing I can say is mark out your mounting points with provided stickers then put up and make adjustments to the roof rack.
by: Nicholas06/02/2020
I choose etrailer simply because they mailed to APO. I’m a AD SM, and a lot of companies don’t shop to APO. As soon as I ordered my product, I received an email as a courtesy from etrailer letting me know I had an individual that would be tracking my product every step of the way, reassuring a smooth process. Their site functionality was easy, their customer service was great. I wanted to know if they had bike racks that would fit my cross bars, I got a email right away with a suggestion and a link that would fit my needs. I’ll definitely order from etrailer if I ever need to again.
by: Andrew08/01/2023
Great! Easy to install!
by: Mark03/10/2020
2018 ToyotaTacoma
I bought a set of baseline towers and a jet stream crossbar and mounted them on the roof of my 2018 Tacoma. I have another crossbar on the back of my truck cap. This set up is perfect for carrying long items like my canoe. James at etrailer was extremely helpful in helping with the necessary parts for this configuration.
by: Jenny05/26/2020
Volkswagen Golf
Relatively easy to install on my VW Golf (etrailer videos are very helpful) and sooooo useful with my Yakima skybox. Not much road noise, so I can leave the rack on even when I am not using it.
by: John P.08/29/2018
2017 Volkswagen Golf
Bought as a pkg for my 2017 Golf R with Round Bars since I had a bunch of Yakima bike racks and a canoe gunwale rack for my old Yakima set up. Installation was easy with good instructions. All measurements from the Yakima site appear to be spot on.
etrailer.com shipped these out quickly and all parts arrived without damage.
by: Zack01/30/2020
The towers are of great quality and construction. Instructions were semi-simple but as long as you read everything twice it’s easy. Great product, I’m very happy with my purchase!
by: Arthur03/23/2021
Took longer than expected to receive order but knew when order was placed it would be over a month to receive complete order.
What I was disappointed in was the installation information, much more complicated than anticipated. Would be better if instructions were provided in one language not multiple, too much text to sort through.
Just seems overly confusing, could be done a lot better.
by: Robert t06/25/2018
After a year, the racks are holding up nicely and still have a solid fit. I only put them on the car when needed. It just takes a few minutes to set them up and go.
by: Shawn M12/05/2020
Installed on my wife's car and she loves it. Even bought kayak attachment and it works great.
by: Nicholas06/02/2020
Great customer service, definitely order from etrailer again.
by: Hudson05/07/2022
Works well and fits well. Have used for several trips totaling more than 4,000 miles.
by: Eileen 07/28/2022
Works Perfect!
by: Jonathan01/04/2024
by: Collin03/19/2020
the product is excellent. very good quality material. the measurement given for my 2016 wrx are not exactly what they should be.
by: Karen11/17/2023
Great!
by: Vicky05/07/2023
by: William07/07/2021
by: Brenda 05/31/2023
by: Orlando12/05/2022
by: Victor 08/28/2022
by: Joe 08/24/2022
by: Colin 11/29/2023
by: Arthur 07/15/2022
by: Ernest 09/17/2021
25
512
Show More Reviews
See what our Experts say about this Yakima Roof Rack
- Recommended Roof Rack for a 2024 Volvo S90 w/ No Rails To add a roof rack to your 2024 Volvo S90, that does not overhang the side of your roof, you will need the following parts: Yakima BaseLine FX Roof Rack for Naked Roofs - Aero Crossbars - Aluminum - Black - Qty 2 item # Y59UV BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 4 item # Y06124 This aero bar roof rack system has a 165 lbs capacity. I recommend adding the Yakima Same Key System item # Y07204 to prevent theft.
view full answer... - Recommended Roof Rack and Kayak Carrier for a 2003 Toyota RAV4Lucky for you, Yakima does make a set of crossbars that are designed to work with vehicle's that have a bare roof like your RAV4. Check out the Yakima BaseLine FX Roof Rack for Naked Roofs # Y59UV with the BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y06185. These crossbars measure 44 3/4" long, has a 165 lb dynamic weight capacity, and has an integrated top channel for roof mounted accessories. Since you also are looking for a way to transport some kayaks, I'd recommend checking...
view full answer... - 2023 GMC Acadia Roof Rack and Cargo Box RecommendationsThe absolute best roof rack for your 2023 GMC Acadia with the bare roof is the Yakima BaseLine FX because it has a nice factory look but is also more robust so you get a great looking system that's also stronger. Here are the parts you'll need: - BaseLine FX Crossbars # Y59UV - Fit Kits # Y06138 and # Y06132 - Lock Core Kit # Y07204 (optional) If you were planning on using this for a cargo box then I highly recommend the Yakima SkyBox NX 18 # Y45AV. I really like this box because it...
view full answer... - Length/Width of Yakima BaseLine FX Roof Rack Crossbars For 2019 Hyundai Santa Fe w/ Bare RoofHi John; great choice going with the Yakima roof rack for your 2019 Hyundai Santa Fe with a bare roof, and the crossbars themselves are 2-3/4" wide x 1-1/8" tall for the Yakima BaseLine FX Roof Rack # Y59UV. That should allow you to clamp any accessory on them as they are standard size crossbars. To complete the set up for your' 19 Santa Fe you'll also need the BaseClip Fit Kit # Y06151 and # Y06154.
view full answer... - Can the Yakima BaseLine Crossbars Handle the Weight Capacity of a Roof Top Tent The weight capacities listed on cross bars like the Yakima BaseLine FX Roof Rack for Naked Roofs # Y59UV are the dynamic capacity, meaning while the vehicle is in motion. When you're parked and using your tent, the weight capacity is easily going to double or triple because the weight will be static over the axles. So with that being said, the BaseLine crossbars will easily be able to handle the weight of the two adults and the roof top tent. It's also worth mentioning that most, if...
view full answer... - Are Two Separate Fits Kits Needed for a Yakima Roof Rack on a 2020 Kia Telluride with a Naked RoofYou will need both the BaseClip Fit Kit # Y06125 and the BaseClip Fit Kit # Y06165 for your 2020 Kia Telluride. The BaseClip Fit Kit # Y06125 are for the front of the Telluride. The BaseClip Fit Kit # Y06165 are for the rear of the Telluride. You then also need the Yakima JetStream Crossbars # Y00426 and the BaseLine Towers # Y28TR to complete the roof rack. You can add the Yakima Same Key System (SKS) Lock Cores # Y07204 to lock the rack to your roof.
view full answer... - How To Reuse Yakima Q-Towers on a 2018 Volkswagen Golf GTII do have an option for you but I don't have any way for you to use your old Q-Towers on your new 2018 Volkswagen Golf GTI because the clips are just not available. The best option you have to reuse some of the components you have now is to purchase new clips part # Y06123 for the front and part # Y06125 for the rear, new feet part # Y28TR, and the adapter part # Y03536. I am not sure what you are asking in regards to Thule but most of their accessories will work with the Yakima round...
view full answer... - Recommended Roof Rack and Cargo Box for 2022 Kia TellurideFor your 2022 Kia Telluride I recommend the Yakima CoreBar rack which includes part numbers # Y00422, # Y28TR, # Y06125, and # Y06165. This rack has an aerodynamic, teardrop shape to reduce noise and vibration and reduces drag to help maintain fuel efficiency. For a roof box, I recommend the Thule Motion XT Rooftop Cargo Box # TH629806. It has a carrying capacity of 18 cubic feet and can hold up to 165 lbs. Since the roof rack can hold 220 lbs, it will be able to handle the weight of any...
view full answer... - Will Rhino-Rack Ski and Snowboard Carrier Fit 2021 Acura ILX With Naked RoofThe Rhino-Rack Ski and Snowboard Carrier # RR576 is designed to clamp onto or fit the T-slot on roof rack crossbars. You will need to add a roof rack to the 2021 Acura ILX to be able to attach any ski/snowboard carrier. I recommend the Inno Aero roof rack which will clamp onto the doorjambs for installation and can easily be removed when not in use. This is a nice rack at a reasonable price point. You will need the following parts: -Inno Aero Crossbars # INXB138-2 -Inno Through Feet for...
view full answer... - Roof Rack for 2013 Toyota Tacoma Double Cab to Carry Two HullavatorsTo carry two Thule Hullavators kayak carriers # TH898 on the roof of a vehicle you'd need to have a roof rack with longer bar lengths as each of these takes up about 28.5 inches of bar space. So your best roof rack setup for your 2013 Toyota Tacoma double cab would be the part # Y00426, # Y28TR, # Y06125, and # Y06128 which has 60 inch long crossbars that the Hullavator could fit on.
view full answer... - Roof Rack System for Thule Hullavator Pro Load Assist Kayak CarrierBoth the Thule Hullavator # TH898 and the Yakima ShowDown # Y04081 are great kayak carriers but I prefer the Hullavator. Regardless of age, after a day of paddling the lift assist is awesome when it comes to helping you load your boat on top of your roof. You do need 4"-8" of overhang on your roof rack for this carrier to work. Your current roof rack on your 2010 Infiniti QX56 will not work. The only confirmed fit for your vehicle is a Thule Roof Rack system like Thule WingBar Evo Crossbars...
view full answer... - How To Carry 5 Bikes On a 2017 Volkswagen Golf GTIYou are definitely on the right track to carrying 5 bikes on your 2017 Volkswagen Golf GTI. I recommend to use the EcoHitch Hidden Trailer Hitch Receiver part # 306-X7309 which is a concealed 2" hitch for the Golf GTI. You can then use any 2" hitch compatible bike rack that you'd like but you will need to stay under 300 lbs which is factoring the weight of the rack itself and the bikes. I recommend to carry 3 bikes on the hitch and 2 bikes on the roof. For the rack, I recommend the SportRack...
view full answer... - Recommended Roof Rack for Roof Top Tent on a 2022 Kia TellurideI have a couple of options for roof racks depending on whether or not your 2022 Kia Telluride has the flush mounted rails that run front to back. If your Kia has the flush mounted rails that run front to back you will want the 2022 Kia Telluride Roof Rack by Rhino Rack. The Roof Rack Includes: Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 54" Long - Qty 2 item # RRVA137B-2 Rhino-Rack SX Series Legs for Vortex Aero Crossbars - Flush Factory Side Rails - Qty 4 item # RR94DY If...
view full answer... - Can I Use the Rhino-Rack Vortex with the Yakima BigCatch Kayak Saddle on a 2019 VW Golf 5 DrI'll try to tackle these in the order you asked them: 1) No, the # RRRS605B will not mount where the plastic tab is and will instead mount 7-7/8" towards the front of the vehicle from the line where the front and rear door meet- the # RRRS605B will clamp into the door jams on your 2019 VW Golf 5dr 2) It's generally a no-go when it comes to opening your moon roof with a roof rack attached to your roof. Luckily this roof rack is fairly easy to install and remove so you'll likely want to...
view full answer... - Roof Rack and Thule Cargo Box Recommendation for 2021 Kia Telluride with Naked RoofFor your 2021 Kia Telluride with a naked roof the best roof rack option is the Yakima JetStream rack part numbers # Y00426, # Y28TR, # Y06125, and # Y06165. This is the highest capacity roof rack that fits your vehicle, is the easiest to install, and has the quietest bar design. You could then carry a cargo box like the Thule Motion XT part # TH629707 which is similar in color to your vehicle and is very easy to use and well made.
view full answer... - Roof Rack for 2022 Kia Telluride With Naked RoofI recommend a Yakima set up. They have quality parts and are easy to work with. You will need Crossbars # Y00426, Towers # Y28TR and baseline clips # Y06125 # Y06165. This set up gives you 60 inch crossbars that will give you a good area to add attachments.
view full answer... - Roof Rack and Thule Cargo Box Recommended for 2022 Kia TellurideI'd recommend a Yakima JetStream roof rack. The rack provides aero-style crossbars which offer less wind resistance than round or square crossbars, and would be much more quiet. You can assemble the roof rack using these parts: • 60 Inch JetStream crossbars part # Y00426 or silver as part # Y00429 • Yakima BaseLine towers, part # Y28TR • Vehicle Specific fit clips, part # Y06125 and # Y06165 (different clips are used for the front and rear crossbar) A Thule cargo box would be compatible...
view full answer... - Will the 60-Inch WingBar Evo Crossbars Fit My 2022 Kia TellurideThe reason why 60-inch WingBar Evo Crossbars # TH711520 are not rated to fit your 2022 Kia Telluride is because the WingBars have attachment slits on the bottom where it connects to the Evo Flush Rail Feet # TH710601 with the Fit Kit for Thule Evo Flush Roof Rack Feet - 186095 # TH77JV. If the crossbars are too long and your roof is too narrow, the slit where the feet connects to the crossbar will not extend far enough to connect, which is the case with the 60-Inch Wingbars. I went ahead...
view full answer...
- Roof Rack Recommendation for Thule Thule Portage on a 2016 Toyota CamryI recommend using a Yakima roof rack with the Thule Portage Canoe Carrier w/ Tie-Downs # TH819 on your 2016 Toyota Camry. Yakima products have great quality and give you a very fine-tuned fit due to the adjustments in the legs that are made for the initial installation. Yakima offer their aero-style crossbars in 2 different options; the steel CoreBar which is a more cost-effective way to get aero-style crossbars, and the JetStream which is made of aluminum and is an upgrade to the CoreBar...
view full answer... - Will the Thule Hullavator # TH898 Fit a 2022 Kia Telluride SXYes, you will be able to use your Thule Hullavator Pro Kayak Carrier and Lift Assist with Tie-Downs - Side Loading # TH898 on your new 2022 Kia Telluride SX. You will need a roof rack like the kit: Thule WingBar Evo Crossbars - Aluminum - Black - 53" Long # TH711420 and Evo Flush Rail Feet for Thule Crossbars - Flush Side Rails # TH710601. If you have no rails you will need a kit like the Yakima JetStream Crossbars - Aluminum - Black - 60" Long - Qty 2 # Y00426, BaseLine Towers for Yakima...
view full answer... - Yakima Q Tower Roof Rack System for a 2017 Volkswagen GTI 4 DoorFits for vehicles change often, or the different body variations for a vehicle can have completely different fits, even if they are largely the same vehicle. At this time, Yakima has started to retire the Q-Clip system in favor of their newer BaseClip fits. However, for your vehicle, you will need Clips Q63 and Q112. If you have an existing round bar, or want to add a new kit to your vehicle, I recommend the following: If you don't have any raised siderails: Round CrossBars, 48...
view full answer... - Recommended Roof Rack for 2020 Kia TellurideThere are a lot of great options for roof racks for your 2020 Kia Telluride, but unfortunately, none of them meet the 220 lbs weight capacity you are looking for. 165 lbs is a common weight limit for roof rack systems. This is usually because of the limitations of the mounting system. Your vehicle roof and typically the actual crossbars themselves can be rated for 220 lbs but the mounting feet that attaches the bars to your roof might be rated for less, so this becomes the limit for the...
view full answer... - Recommended Roof Rack for a 2014 Honda Civic Si CoupeTo add a roof rack to your 2014 Honda Civic Si Coupe you will want the roof rack by Yakima and it includes the following parts: Yakima JetStream Crossbars - Aluminum - Black - 60" Long - Qty 2 item # Y00426 BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 item # Y28TR BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06125 BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06143 This roof rack attaches to the groves inside your door...
view full answer... - Recommended Roof Rack for a 2020 Kia Sportage w/out Roof RailsYes, we do have options to add a roof rack to your 2020 Kia Sportage without roof rails. I recommend the Kia Sportage Roof Rack by Yakima. You will need the following parts: Yakima HD Crossbars 500 lbs Capacity Aluminum - Black - 55" Long - Qty 2 item # Y01156 BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 item # Y28TR HD Bar SL Adapter for Yakima BaseLine, SkyLine, TimberLine, and RidgeLine Towers - Qty 4 item # Y03541 BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers...
view full answer... - 2022 Kia Telluride Roof Rack Recommendation for 2 Thule Hullavator Pro Kayak CarriersYes, you can fit 2 of the Thule Hullavator Pro # TH898 on your 2022 Kia Telluride. They use up 28-1/2" of crossbar space and weight in at about 40 lbs each so we definitely want to keep that in mind as we look into roof rack solutions. I recommend going with a Yakima JetStream roof rack system because it's the only system where the bars will be long enough to accommodate 2 of the Hullavators (not to mention it is a nice roof rack system). The correct roof rack kit depends on if you have...
view full answer... - Yakima Q-Clips for a 2009 Toyota Tacoma Double CabThanks for sending us a picture! The 2009 Toyota Tacoma requires 2 different sets of Q Clips when installing a Yakima roof rack. First, the front clips will be Q-127 and rear clips are Q-128. The Q Clip system has been discontinued by the manufacturer so if you don't have access to old parts, then I recommend using the round bars and adding the following parts to complete the system: # Y28TR, # Y03536, # Y06125 and # Y06128.
view full answer...
- Parts Needed to Complete Yakima Roof Rack on a 2008 Toyota TacomaSince it looks like you have a Q-towerYakima crossbar setup you would only need the correct fit kit so that it could install on your 2008 Toyota but the clips for those towers are no longer available. Instead you will use the following: BaseLine Towers # Y28TR RoundBar SL Adapter # Y03536 BaseClip Fit Kit # Y06125 and # Y06128 Hopefully the crossbar is at least 58 inches long. Otherwise you would need the part # Y00409 as well.
view full answer...
- Roof Rack for Carrying a Canoe/Kayak on a 2014 Subaru Impreza with a Naked RoofWhile we do have roof racks for your 2014 Subaru Impreza, the (discontinued) Custom Fit Kit WB-K473 you referenced is for various years and models of GM pickups and there isn't a Whispbar roof rack currently in production that fits your vehicle. If you like the higher quality of a Whispbar product then you'll want to go with a Yakima roof rack as they actually manufacture the Whispbar brand. From what you were looking at I'm guessing you have a Sedan that isn't the WRX. For this you'll...
view full answer... - Recommended Roof Rack For A 2022 Kia Telluride With Naked Roof For Carrying A Thule Roof BoxTo carry the Thule Force XT XL Roof Box # TH6358B on the top of your 2022 Kia Telluride with the naked roof, you will indeed need a full system. Though we do not have a Thule roof rack system to match this roof box, we do have a Yakima set up that will fit perfectly. The Yakima JetStream Crossbars - Aluminum - Black - 60" Long # Y00426, which are the recommended size, will be the quietest ones currently on the market and will have no issues carrying the Thule roof box. To complete this...
view full answer... - 2018 Mazda CX-9 Roof Rack For A Naked RoofIf you have what we call a naked roof, meaning no raised rails or flush rails, you cannot choose where to place the rack on the roof of your 2018 Mazda CX-9. Here is a setup for your car on a naked roof. The rack would consist of three separate parts; Yakima JetStream Crossbars - Aluminum - Black - 50" Long - Qty 2, part # Y00425, BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4, part # Y28TR, BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2, part # Y06138, BaseClip...
view full answer... - Yakima Roof Rack Recommendation for Cab and Camper Shell on 2022 Toyota TacomaFor a Yakima roof rack system on the cab and camper shell of your 2022 Toyota Tacoma I recommend going with the JetStream crossbars. I'll break down what parts you need for each section so it's easier to know what is paired together. Truck Cab 50" JetStream Bars - # Y00425 BaseLine Towers - # Y28TR BaseClip - # Y06145 BaseClip - # Y06128 Camper Shell 50" JetStream Bars - # Y00425 60" Tracks - Y01135 SkyLine Towers - # Y53TR Landing Pad 1 - # Y00221 (you'll need 2 of these) I also recommend...
view full answer...
- Roof Rack for 2013 Toyota Tacoma Double Cab to Carry Two HullavatorsTo carry two Thule Hullavators kayak carriers # TH898 on the roof of a vehicle you'd need to have a roof rack with longer bar lengths as each of these takes up about 28.5 inches of bar space. So your best roof rack setup for your 2013 Toyota Tacoma double cab would be the part # Y00426, # Y28TR, # Y06125, and # Y06128 which has 60 inch long crossbars that the Hullavator could fit on.
view full answer... - Can I Use Yakima Crossbars And Skyline Towers On A 2020 Toyota Tacoma Double CabI can certainly point you in the right direction. Since your 2020 Tacoma Does not have the fixed mounting points, you will not be able to re-use your Skyline Towers. The SkyLine Towers can only be used with fixed mounting points, flush rails and track systems. You will however, be able to re-use your Yakima crossbars. We recommend a minimum 50" crossbar for the 2020 Tacoma Double Cab. So as long as your crossbars are 50" (or longer), we can set you up. You will need the following parts...
view full answer... - What Yakima Roof Rack Do You Recommend For My 2022 Toyota Tacoma With A Camper ShellYou will be able to put Yakima tracks on your shell. The rack will consist of the following: Yakima 42" Tracks for Roof Racks, part # Y01126 Yakima CoreBar Crossbars, part # Y00421, SkyLine Towers for Yakima Crossbars, part # Y53TR, Landing Pad 1 for Yakima SkyLine and Control Towers, part # Y00221, Yakima Same Key System (SKS) Lock Cores (QTY 4), part # Y07204. The crossbars have a weight limit of 220 lbs, but check your shell owner's manual to find out its weight limit. Your racks maximum...
view full answer... - Roof Rack and Kayak Carrier Recommendation for 2018 Toyota Tacoma Couble CabYou'd need a roof rack confirmed to fit your 2018 Toyota Tacoma Double Cab with longer crossbars like the Yakima Corebar Rack part numbers # Y00422, # Y28TR, # Y06145, and # Y06128 which has 60 inch long crossbars. You could easily use a SweetRoll # Y04074 for each of your kayaks then with this rack. This leaves your truck bed open for the tonneau cover and would work well.
view full answer... - Roof Rack to Fit a 2018 Toyota Tacoma with Fixed Mounting PointsIf you definitely want a Yakima roof rack then the clamp-style attachment is all that is available at this time. For their system I recommend CoreBar system using BaseLine towers # Y28TR, fit kits # Y06145 and # Y06128, and then either the 50 inch, part # Y00421, or 60 inch, part # Y00422, crossbars. Since your 2018 Toyota Tacoma has the fixed mounting points there are Rhino-Rack systems that fit. I recommend the Vortex Aero bars, part # RRVA126B-2, with # RRRLT600 legs, and # RRQMFK08-2...
view full answer... - Kayak Carrier Recommendation for Hobie Mirage Compass Fishing KayakSince your Hobie Mirage Compass fishing kayak weighs 87 lbs you're either going to have to use a post-style carrier like the Yakima BigStack # Y04041 or use 2 sets of a J-Style carrier like the etrailer J-Style Kayak Carrier # e98878. I recommend going with 2 of the J-Styles simply because it will be easier to load an individual kayak on each one, especially with your heavier kayak. If you don't already have a roof rack then I recommend using a Yakima CoreBar roof rack. The correct parts...
view full answer... - Will Yakima OffGrid Cargo Basket Fit on 2018 Toyota Tacoma Roof?Absolutely! The Yakima OffGrid Cargo Basket # Y07138 is 44" long by 40" wide. From my experience with the Tacoma and some research, the roof size is about 60" long and 52" wide on the double cab. The usual aftermarket roof rack crossbars for the 2018 Toyota Tacoma like # Y00425 are 50" long. This means the Yakima OffGrid will definitely fit on your roof. I attached my video review and install of this rack on a 2020 Toyota Tacoma. It's also a double cab which is an extra point for you since...
view full answer... - Yakima Q-Clips for a 2009 Toyota Tacoma Double CabThanks for sending us a picture! The 2009 Toyota Tacoma requires 2 different sets of Q Clips when installing a Yakima roof rack. First, the front clips will be Q-127 and rear clips are Q-128. The Q Clip system has been discontinued by the manufacturer so if you don't have access to old parts, then I recommend using the round bars and adding the following parts to complete the system: # Y28TR, # Y03536, # Y06125 and # Y06128.
view full answer... - Parts Needed to Complete Yakima Roof Rack on a 2008 Toyota TacomaSince it looks like you have a Q-towerYakima crossbar setup you would only need the correct fit kit so that it could install on your 2008 Toyota but the clips for those towers are no longer available. Instead you will use the following: BaseLine Towers # Y28TR RoundBar SL Adapter # Y03536 BaseClip Fit Kit # Y06125 and # Y06128 Hopefully the crossbar is at least 58 inches long. Otherwise you would need the part # Y00409 as well.
view full answer... - Solution for Transporting Kayak on 2017 Toyota Tacoma with Extang Encore Tonneau Cover InstalledI have a couple possible solutions for you to transport your kayak with your 2017 Toyota Tacoma, however there is not a standard ladder rack available that is compatible with the Extang Encore Tonneau Cover. This is because the hardware for the Encore Tonneau Cover partially covers the top of the bed rails and any ladder rack will either require access to the inside of the bed rails or complete access to the stake pockets. The first option for your setup is to add a rail system and crossbars...
view full answer... - Roof Rack or Truck Bed Rack for 2022 Toyota Tacoma Double CabFor your 2022 Toyota Double Cab you could go with a Thule roof rack like the Wingbar Evo # TH711420, # TH710501, and # TH145107 to carry your bikes with a bike rack, or you could go with the bed rack option from Yakima the BedRock HD # Y01160-58 if you preferred to carry them there. I like the bed option because you won't have to lift your bikes as high and the bikes would be shielded slightly from the wind behind the cab. If your truck bed is clear this would be what I would go with. If...
view full answer... - Which Yakima Roof Rack System For 2021 Toyota Tacoma and ShellTo mount one crossbar to your 2021 Toyota Tacoma Double Cab I recommend the Base Line Towers # Y28TR, Round 48" Crossbar # Y8810021, Round Bar Adapter # Y03536, and Base Clip Fit Kit # Y06128 if you are mounting the crossbar on the rear of the vehicle, or Base Clip Fit Kit # Y06145 if you are mounting the crossbar on the front of the vehicle. For your shell you can use your existing Yakima Round Crossbars or Round 48" CrossBars for Yakima Roof Rack System # Y00408. In addition you will...
view full answer... - Yakima Roof Rack Components Fit HD Bar Setup on 2020 Toyota Tacoma with Naked RoofYakima does have an HD roof rack that fits your 2020 Toyota Tacoma with a naked roof but the correct towers for your vehicle are the Baseline towers and not the Skyline. What you would need is the following components # Y01156, # Y28TR, # Y03541, # Y06145, and # Y06128. The fit kit you mentioned does not fit your truck. Since you already have the bars you may not need the part # Y01156 as well.
view full answer... - Aero Bar Roof Rack that Fits 2022 Toyota Tacoma Access CabSince Rhino Rack states it can't fit the Access Cab models that would be the correct fit info. So for a similar roof rack that does fit the Access Cab of your 2022 Toyota Tacoma we have the Yakima JetStream part numbers # Y00425, # Y28TR, # Y06145, # Y06128.
view full answer... - Rack for Rooftop Tent with Tonneau Cover for 2017 Toyota TacomaThe best way to mount a roof-top tent to your 2017 Toyota Tacoma with a Truxedo LoPro tonneau cover is using a roof rack like Yakima's CoreBar Crossbars Roof Rack System: # Y00421, # Y28TR, # Y06145, # Y06128. With the way your tonneau cover secures to your bed and the lack of stake-pockets on the Tacoma there isn't a ladder rack available for your Tacoma that works together with your tonneau. I like the CoreBar system because it has a high capacity and it looks good. One thing that...
view full answer... - Parts Needed To Add Single Yakima HD Crossbar To Roof Of a 2022 Toyota Tacoma Double CabWe do have a Single Yakima HD Crossbar # Y35FR which you can pair with the Two Towers # Y62TR. You will need the Adapters # Y03541 which we only carry as a set of 4 along with either the Front # Y06145 or Rear # Y06128 fit kit depending on if you plan on mounting it above the front doors or rear doors.
view full answer... - Correct Yakima SKS Lock Core Kit for Yakima HD Roof and OverHaul HD on a 2016 Toyota TacomaThat is an excellent setup and I know you'll be happy with that on your 2016 Toyota Tacoma. I'll list out all of the parts you'll need (just so you have them all in one place) but I did want to say while the OverHaul HD does come with locks, we don't have a way to choose the correct lock cores that come in the packaging so your best bet is to go with the 6-lock core SKS # Y07206 because it gives you matching cores for the 2 needed for the ladder rack and then the 4 needed for the roof rack. With...
view full answer... - Parts Needed to Install Yakima Round Bar Roof Rack on 2016 Toyota Tacoma Double CabSince the Q Tower style of Yakima roof rack is being phased out they don't have a set of Q Clips that fit a 2017 Toyota Tacoma double cab at this time but we do have a solution that would work for you. If you have a set of round bars like the part # Y00408 they recommend for your vehicle you can piece together the rest of the roof rack that you'd need. You'll want the BaseLine Towers part # Y28TR, RoundBar SL Adapter # Y03536, the BaseClip kit part # Y06145, and BaseClip kit part # Y06128.
view full answer... - Parts Needed to Install Yakima Round Bar Roof Rack on 2015 Toyota Tacoma Access CabFor your 2015 Toyota Tacoma Yakima has a round bar roof rack that is a confirmed fit but it uses the Baseline towers and not the Skyline towers so you would need the part # Y00409, # Y28TR, # Y03536, # Y06125, # Y06128. This is a 58 inch bar setup and based on install pictures I've seen of this rack on a similar Tacoma a shorter 48 inch bar would not fit.
view full answer... - Roof Rack for 2015 Toyota Tacoma Double Cab and Roof Rack for a Camper ShellI would be happy to help you find roof racks for both your 2015 Toyota Tacoma Double Cab and your camper shell. I'll start out with the roof rack for your truck. It is the 2015 Toyota Tacoma Roof Rack by Yakima. These 60" wide heavy-duty crossbars mount to Yakima towers to create an aftermarket roof rack. The top and bottom channels let you add channel-mount accessories. The tie-down points in the endcaps let you easily secure cargo. I have linked a picture of this roof rack installed as...
view full answer...
- Ladder Rack and Roof Rack Recommendation for a 2013 Toyota TacomaThe Yakima Roof Rack in the video you referenced has been discontinued by the manufacturer. If you have the double cab, then I recommend the following parts for a Yakima roof rack: # Y00426, # Y28TR, # Y06125, and # Y06128. The locks to secure this are # Y07204. This roof rack could be used in conjunction with a truck bed ladder rack like the Thule Xsporter part # TH500XT for your 2013 Toyota Tacoma. This is an adjustable height ladder rack that will let you perfectly match up the height...
view full answer...
Do you have a question about this Roof Rack?
Info for this part was:
Edited by:
Daron K
Written by:
Alex H
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.