See what our Experts say about this Yakima Roof Rack

• Roof Rack For 2024 Chevy Trailblazer FWD 1.3L With Naked Roof
  Hello Cesar, thanks for reaching out and congrats on the new car! For your 2024 Chevy Trailblazer FWD 1.3L with the naked roof I recommend the Yakima BaseLine Roof Rack for Naked Roofs # Y52XB. This is a complete roof rack system, so you get your crossbars, towers and custom fit kit. The fit kit is what allows the towers to clamp to the door jambs. I have linked our install video for your below, and it goes over the setup process in detail.
  view full answer...
• Recommended Roof Rack for a 2022 Toyota C-HR w/out Roof Rails
  Yes, it is possible. To add a roof rack to your 2022 Toyota C-HR, without rails that does not overhang, I recommend the roof rack by Yakima which includes the following parts: Yakima BaseLine FX Roof Rack for Naked Roofs - Aero Crossbars - Aluminum - Black - Qty 2 item # Y89UV BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06117 BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06176 I have attached a couple of pictures below that will give...
  view full answer...
  
• Recommended Roof Rack for a 2024 Toyota Corolla Sedan w/out Roof Rails
  To add a set of crossbars to your 2024 Toyota Corolla with no roof rails, I recommend the roof rack by Yakima which includes the following parts: Yakima BaseLine FX Roof Rack for Naked Roofs - Aero Crossbars - Aluminum - Black - Qty 2 item # Y89UV BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06135 BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06151 This aero bar roof rack system has a 165 lbs capacity. I recommend adding the Yakima Same...
  view full answer...
• Recommended Roof Rack for a 2024 Lexus ES 300h w/out Roof Rails
  Congrats on the new car! Yes, we do have a roof rack set up that will work with your 2024 Lexus ES 300h even though you don't have the side rails. This mounts directly to your roof with custom fit clips and the crossbars will not overhang the side. I recommend the roof rack by Yakima and it includes the following parts: Yakima BaseLine FX Roof Rack for Naked Roofs - Aero Crossbars - Aluminum - Black - Qty 2 item # Y89UV BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item...
  view full answer...
• Recommended Roof Rack for a 2024 Lexus ES 350 w/out Rails and No Glass Roof
  Yes, there is! Since your 2024 Lexus ES 350 does not have rails or the glass roof top you can use the roof rack by Yakima which includes the following parts: Yakima BaseLine FX Roof Rack for Naked Roofs - Aero Crossbars - Aluminum - Black - Qty 2 item # Y89UV BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06143 BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06170 This aero bar roof rack system has a 165 lbs capacity. I have attached a couple...
  view full answer...
  
• Yakima BaseLine FX Roof Rack Components Needed For A 2020 Honda Civic Coupe
  Hi Adrian, Yes, for your 2020 Honda Civic Coupe with a naked roof you would need the following components: Yakima BaseLine FX Crossbar for Naked Roofs - 44-3/4" Long - Black - Qty 1 # Y63TR (two kits needed) BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 # Y06182 (two kits needed)
  view full answer...
• Recommended Roof Rack For A 2024 Chevy Trailblazer
  For a 2024 Chevy Trailblazer with factory rails that run front to back you'll need the following components: Yakima BaseLine FX Roof Rack for Naked Roofs - JetStream Aero Crossbars - Aluminum - Black - Qty 2 # Y89UV BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 # Y06183 BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 # Y06187 If you have a naked roof then you'll need the following components instead: BaseLine Towers for Yakima Crossbars - Naked Roofs -...
  view full answer...
• Recommended Roof Rack for a 2022 Nissan Sentra w/ No Roof Rails
  I would be happy to help you! To add a roof rack that stops at the mounting legs to the naked roof of your 2022 Nissan Sentra, I recommend the roof rack by Yakima which includes the following parts: Yakima BaseLine FX Roof Rack for Naked Roofs - Aero Crossbars - Aluminum - Black - Qty 2 item # Y89UV BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06161 BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06179
  view full answer...
• Recommended Roof Rack for a 2024 Nissan Leaf w/ a Naked Roof
  To add a roof rack to your 2024 Nissan Leaf you will need the following parts: Yakima BaseLine FX Roof Rack for Naked Roofs - Aero Crossbars - Aluminum - Black - Qty 2 item # Y89UV BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06159 BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06176 This roof rack has a 165 lbs capacity and includes custom fit clips that mount inside your Leaf's door frames. The crossbars do not extend over the sides...
  view full answer...
• Recommended Roof Rack for a 2024 Chevrolet Trailblazer w/ a Naked Roof
  To add a set of crossbars, that don't extend past the legs, to your 2024 Chevy Trailerblazer, I recommend the roof rack by Yakima which includes the following parts: Yakima BaseLine FX Roof Rack for Naked Roofs - JetStream Aero Crossbars - Black - Qty 2 item # Y89UV BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06183 BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06187 This aero bar roof rack system has a 165 lbs capacity. I recommend adding...
  view full answer...
• Recommended Roof Rack for a 2024 Chevrolet Trailblazer w/out Roof Rails
  To add a roof rack to the naked roof of your 2024 Chevrolet Trailblazer, I recommend the roof rack by Yakima which includes the following parts: Yakima BaseLine FX Roof Rack for Naked Roofs - Aero Crossbars - Aluminum - Black - Qty 2 item # Y89UV BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06183 BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06187 This aero bar roof rack system has a 165 lbs capacity. The crossbars do not extend past...
  view full answer...
• Roof Rack for Carrying a Canoe/Kayak on a 2014 Subaru Impreza with a Naked Roof
  While we do have roof racks for your 2014 Subaru Impreza, the (discontinued) Custom Fit Kit WB-K473 you referenced is for various years and models of GM pickups and there isn't a Whispbar roof rack currently in production that fits your vehicle. If you like the higher quality of a Whispbar product then you'll want to go with a Yakima roof rack as they actually manufacture the Whispbar brand. From what you were looking at I'm guessing you have a Sedan that isn't the WRX. For this you'll...
  view full answer...
• What Kayak Load Assist Can I Use With My Lockrack For My 2016 Subaru WRX
  I do have a solution for you, but will not involve the Lockrack Loading Bar. You will still have to remove, or adjust the orientation, of the arms for this solution to work, but this method would be your only option. You can use the following items to help you load your kayak with the Lockrack Loading Bar. The Rhino-Rack Universal Load Assist - Crossbar Mount - Side Loading - 132 lbs, part # RR-RUSL. This load assist bar clamps to your roof top rack and it has a weight limit of 132 lbs....
  view full answer...
  
• Yakima Roof Bike Rack Recommendation for 16 Kids Bike Wheels on a 2018 Subaru WRX Sedan
  As far as Yakima racks that work with 16" and 20" wheels, the best and only option is the fork-mounted Yakima HighSpeed # Y02115. With this rack, I confirmed with Yakima that it does not require a minimum or maximum wheel diameter as long as the bike's tires do not exceed 5" wide and the bike's wheelbase does not exceed 48". As far as compatibility with the kid's bike, it is compatible with 9 mm x 100 mm, 12 mm x 100 mm, 15 mm x 100 mm, 15 mm x 110 mm, 15 mm x 135 mm, 15 mm x 142 mm, 15...
  view full answer...
• Roof Rack Fit for 2015 Hyundai Sonata with Glass Panoramic Sunroof
  The roof rack I recommend for you is the Yakima Roof Rack with JetStream Crossbars # Y00426, BaseLine Towers # Y28TR, BaseClip Fit Kit # Y06137, and BaseClip Fit Kit # Y06127. I confirmed with my contact at Yakima that they do not have any fit restrictions for the glass panoramic sunroof on your 2015 Hyundai Sonata and so this roof rack will work well for you. I have attached a photo showing where this rack mounts on the Sonata.
  view full answer...
  
• Will the Yakima Sidewinder Bike Rack Fit on Elliptical Style Crossbars on a 2013 Nissan Altima
  The Rhino-Rack Roof Rack with the Vortex Aero Crossbars, # RRVA126B-2, 2500 Series Leg Kit, # RRRLKVA, and the Custom DK Clamps and Pads, # DK381, will fit a 2013 Nissan Altima, however the Yakima Sidewinder Tandem Bike Rack is only compatible with round crossbars. According to my contact at Yakima, Yakima does not offer an adapter that will allow the Sidewinder bike rack to be used with elliptical style crossbars because the weight of the bike rack and a tandem bike would be too great...
  view full answer...
• Parts Needed to Install Yakima Round Bar Roof Rack on 2015 Nissan Altima
  We have parts to fit your Yakima round bars on your 2015 Nissan Altima, but not with the Q Towers as they were discontinued. According to Yakima you'll need the bars that you have already like part # Y00408. BaseLine Towers # Y28TR RoundBar SL Adapter # Y03536 BaseClip Fit Kit # Y06137 BaseClip Fit Kit # Y06127
  view full answer...
• Roof Rack Recommendation for 2015 Hyundai Sonata with Panoramic Roof
  Yakima has roof racks for your 2015 Hyundai Sonata Limted that include the panoramic roofs like what you have. So for that you could use the Jetstream Crossbar kit # Y00426, # Y28TR, # Y06137, and # Y06127 and you'd be set.
  view full answer...
• Roof Rack And Cargo Carrier Recommendation For 2014 Nissan Altima 4-Door
  The Yakima Roof Rack System Is a good fit for your 2014 Nissan Altima 4 door. The weight capacity for the roof rack is 100 lbs. That would include the weight of any cargo box you choose added to the weight of any cargo you place in the carrier. The front crossbar is placed 15-1/8 inches from the windshield. The crossbar spread is 24 inches. You need the following parts for the roof rack: 48 inch RoundBars # Y00408 BaseLine Towers # Y28TR RoundBar Adapter # Y03536 BaseClips # Y06137 and...
  view full answer...
• Carrying Bikes on a 2017 Hyundai Sonata Hybrid Limited
  The best bike rack is the one that's best for you. A lot of which is determined by how many and what kind of bikes you're going to be carrying. As well as how often you're going to be hauling the bikes. Overall, in my opinion, a hitch mount bike rack is the best way to go; however if you need to carry more than two bikes it isn't going to work for you because the only hitches that are designed for your 2018 Hyundai Sonata Hybrid are Class I receivers which are only able to carry up to...
  view full answer...
• Recommended Roof Rack for a 2015 Hyundai Sonata with Panoramic Roof
  The roof rack that I recommend using on your 2015 Hyundai Sonata with the panoramic roof is the Yakima JetStream roof rack. This consists of the 60" JetStream Bars # Y00426, along with the BaseLine Towers # Y28TR, and the BaseClip Fit Kits # Y06137 and # Y06127. If you would like to add locks to this then you also need part # Y07204. I spoke with my contact at Yakima and he said that right at where the roof rack bars sit you will have about 4" - 4-1/2" and then in the middle of the roof...
  view full answer...
  
• Recommended Yakima Roof Rack That Will Fit 2012 Infiniti G37 And 2016 Nissan Altima
  To install a Yakima roof rack on your 2012 Infiniti G37 and your 2016 Nissan Altima, you will be able to use the same crossbars and towers. The only different parts you will need will be the fit kits for each vehicle. I recommend purchasing the roof rack for the 2016 Altima. You would need part # Y00425, part # Y28TR, part # Y06137, and part # Y06127. Then for the Infiniti you will only need to get part # Y06109. You can use the crossbars and towers from the Altima kit mentioned above.
  view full answer...
• Roof Rack Fit on 2014 Hyundai Veloster
  I checked with the roof rack manufacturers and was able to find a roof rack that is a confirmed fit for your 2014 Hyundai Veloster, which is from Yakima and consists of the following parts: - Yakima JetStream Crossbars Black # Y00425 - BaseLine Towers for Yakima Crossbars # Y28TR - BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y06180 - BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y06127 This roof rack has aerodynamic bars which are low profile, giving the rack a...
  view full answer...
• Roof Rack and Cargo Carrier Options for 2013 Nissan Altima 4-Door Sedan with Moon Roof
  We offer many roof rack options for your 2013 Nissan Altima 4-Door Sedan with moon roof; and we also offer a range of rooftop cargo products, some of which can be mounted to a roof rack and others which require only roof side rails. Since your Altima has a moon roof it is indeed a good idea to install a roof rack to support the cargo carrier, but if your cargo needs do not require a high weight capacity, and if your Altima owner's manual does not prohibit fabric bags like the Yakima being...
  view full answer...
• What Kayak Carrier do You Recommend for My 85-Pound Kayak on My 2016 Hyundai Sonata?
  I have a great solution for you. While the Thule Hullavator # TH898 can be used with a crossbar system that uses clips on your 2016 Hyundai Sonata without a panoramic roof, it has a weight capacity of 75 pounds. Unfortunately, this is not enough weight capacity for our 85-pound kayak. We also do not carry a load-assist option that has enough weight capacity for your kayak. In addition, With that being said, the best option is to use the Yakima BigCatch Kayak Carrier w/ Tie-Downs - Saddle...
  view full answer...
• Yakima Feet and Fit Kit for 2013 Altima
  Hey Terry, for the complete Baseline roof rack part # Y33CB that fits your 2013 Nissan Altima we do have replacement feet for it with the part # Y28TR. The fit kits are part # Y06127 and # Y06137 What specific rack do you have now? Are they round bars by chance?
  view full answer...
• Roof Rack with Yakima SweetRoll Kayak Saddles on 2016 Nissan Altima
  The Yakima SweetRoll Kayak Carrier # Y04074 will fit onto the SportRack Roof Rack # SR1010. The SportRack will fit on your 2016 Nissan Altima however it's a semi-custom fit so it's not designed specifically to fit the roof of your car. For a custom fit I suggest the Yakima Roof Rack: 48 inch Round CrossBars # Y00408 BaseLine Towers # Y28TR RoundBar Adapter # Y03536 BaseClip Fit Kits # Y06137 and # Y06127
  view full answer...
• Recommended Roof Rack For My 2015 Chevrolet Cruze
  I do have a roof rack that will fit your 2015 Chevrolet Cruze, but your Malone roof rack will not fit your vehicle. My roof rack recommendation will consist of the following: Yakima CoreBar Crossbars - Steel - Black - 50" Long - Qty 2, part # Y00421 BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4, part # Y28TR BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2, part # Y06137 BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2, part # Y06127 Yakima Same Key...
  view full answer...
• Parts Needed to Install Yakima Jetstream Roof Rack on 2016 Hyundai Veloster
  Yakima would be the final authority on the correct components to install one of their roof racks on your 2016 Hyundai Veloster. I checked with them just now and the correct Base Clips would be the part # Y06127 and # Y06180. The other components you'd need would be the Yakima JetStream crossbars part # Y00425 and Baseline Towers part # Y28TR.
  view full answer...
• Recommendations For Carrying 4 Bikes On 2012 Hyundai Veloster
  With a Class l hitch on your 2012 Hyundai Veloster, you are limited with the tongue weight capacity and any bike carrier you install in the hitch limits you to 2 bikes. You will want to check your owner's manual or with your dealership to make certain you do not exceed the vehicle's tongue weight capacity. The Saris Freedom 4 Bike Platform Rack, part # SA4414B, is rated to be used with higher rated hitches and would not be a fit for your Veloster. You will want to make sure any accessory...
  view full answer...
• Roof Rack and Kayak Carrier for 2014 Chevy Cruze
  The SportRack light-duty roof rack # SR1010 is a confirmed fit on your 2014 Chevy Cruze and it will be compatible with almost any roof-rack-mount kayak carrier since it uses square bars. But do please note that this rack has the lowest weight rating of all racks made for your car (90-lbs), so while it is a nice value it may not be the best choice for transporting a kayak. If, for instance, you are planning to take just one 40 or 50-lb kayak only a short distance on local roads, not on...
  view full answer...
• Installation of Yakima Roof Rack on 2013 Nissan Altima
  Installing the Yakima JetStream roof rack on your 2013 4-door Nissan Altima does not require the weather to be a certain temperature and there should be no interference with your door putting the rack on. The accompanying photo shows how the clamps will look when installed properly and your door should shut completely. This rack is made up of: - Yakima JetStream Crossbars # Y00425 - BaseLine Towers for Yakima Crossbars # Y28TR - BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers #...
  view full answer...
  
• Roof Rack Recommendation for 2018 Nissan Altima with Sunroof
  For your 2018 Nissan Altima with a sunroof the Yakima roof rack part numbers # Y00421, # Y28TR, # Y06137, and # Y06127 is a confirmed fit and would work great. The only tech tip that Yakima states is that when open, the sunroof may interfere with some accessories. The aero shape of these crossbars will give you a very quiet ride and minimize fuel mileage loss.
  view full answer...
• Parts Needed to Install Yakima Roof Rack on 2017 Nissan Altima
  Yakima recently made some changes to their round bar roof racks but you can still install a round bar rack on your 2017 Nissan Altima but you will need new feet and fit kit. For that the # Y00408 if you needed new bars, # Y28TR for feet, # Y03536 for bar adapters, and fit kits # Y06137 and # Y06127 and you'd have everything you'd need.
  view full answer...
• Parts for Yakima JetStream Roof Rack on 2017 Land Rover Discovery Sport and How Many Bikes Will Fit
  To install the 50" Yakima JetStream crossbars # Y00425 on your 2017 Land Rover Discovery Sport you'll also need the BaseLine Towers # Y28TR as well as fit kits # Y06127 and # Y06154. When it comes to bike capacity there are a few factors that come into play, but if your bikes are lightweight then you can potentially fit 5 or 6 bikes on 50" crossbars. The factors that you need to take note of are the weight of your bikes, the width of the bike racks you plan on using, and the geometry of...
  view full answer...
• Recommended Yakima Roof Rack for 2007 Honda Accord 4 Door
  For your 2007 Honda Accord you would simply select sedan for the 4 door version. The Yakima system for your vehicle will be the Baseline roof rack. The Q-Tower and Q-Clip fit kits were discontinued a few years back. My recommendation for you consists of the following Yakima parts: JetStream Crossbars - Aluminum - Black - 50" Long # Y00425 BaseLine Towers # Y28TR BaseClip Fit Kit (front) # Y06159 BaseClip Fit Kit (rear) # Y06143 I also recommend adding locks # Y07204
  view full answer...
• 2019 Kia Sorento LX Roof Rack Recommendation
  We do have a roof rack that fits your 2019 Kia Sorento with a naked roof, the Yakima roof rack that consists of part # Y28TR, # Y06159, # Y06170, and # Y00425. This will give you a very easy to install and aerodynamic roof rack confirmed as a fit.
  view full answer...
• Recommended Roof Rack for a 2024 Lexus ES 300h w/out Roof Rails
  Congrats on the new car! Yes, we do have a roof rack set up that will work with your 2024 Lexus ES 300h even though you don't have the side rails. This mounts directly to your roof with custom fit clips and the crossbars will not overhang the side. I recommend the roof rack by Yakima and it includes the following parts: Yakima BaseLine FX Roof Rack for Naked Roofs - Aero Crossbars - Aluminum - Black - Qty 2 item # Y89UV BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item...
  view full answer...
• Recommended Roof Rack for a 2024 Lexus ES 350 w/out Rails and No Glass Roof
  Yes, there is! Since your 2024 Lexus ES 350 does not have rails or the glass roof top you can use the roof rack by Yakima which includes the following parts: Yakima BaseLine FX Roof Rack for Naked Roofs - Aero Crossbars - Aluminum - Black - Qty 2 item # Y89UV BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06143 BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06170 This aero bar roof rack system has a 165 lbs capacity. I have attached a couple...
  view full answer...
  
• 2019 Kia Sorento Roof Rack Recommendation for Naked Roof
  Since your 2019 Kia Sorento has the naked roof we will need to use a different brand since the Rhino-Rack roof rack will only fit if your Sorento had the flush rails. The alternative that fits is the Yakima roof rack and I recommend using the JetStream crossbars as they give you the aero-style with the T-Slots for various accessory mounting solutions: 50" JetStream Crossbars - Black # Y00425 BaseLine Towers - # Y28TR BaseClip Fit Kits - # Y06159 and # Y06170 Lock Core Kit - # Y07204...
  view full answer...
  
• Recommended Roof Rack for 2019 Kia Sorento with Naked Roof
  We do have a really great selection of roof rack systems that are confirmed to fit the naked roof on your 2019 Kia Sorento. I specifically recommend the Yakima JetStream setup that consists of part # Y00425 for the two 50" JetStream Crossbars in Black, # Y28TR for the BaseLine Towers, # Y06159 for the Front BaseClip Fit Kit, and # Y06170 for the Rear BaseClip Fit Kit. This is going to provide you with an extremely sleek rack that will be really quiet on the road due to the aerodynamic...
  view full answer...
  
• Base Clips For Yakima Roof Rack Towers On A 2018 Toyota Corolla
  It looks like all of the Yakima roof racks that are confirmed to fit your 2018 Toyota Corolla use BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y06130 and BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y06170. To confirm, you can give me more information about your roof rack that you have and I will make sure this is the correct clip set. I have attached a demonstration video to show you how these clips install.
  view full answer...
• Yakima Roof Rack that Fits 2019 Kia Sorento with Naked Roof
  Yakima does have a JetStream roof rack confirmed as a fit for your 2019 Kia Sorento with a naked roof with the part numbers # Y00425, # Y28TR, # Y06159, # Y06170. The Jetstream bars are really nice as they are aero shaped and have a channel that runs down the top of it for roof accessories that have channel attachment options.
  view full answer...
• Which Yakima BaseClip Fit Kit Is For The Front And Which Is For The Rear?
  The Yakima BaseClip Fit Kit # Y06123 is for the front and the Yakima BaseClip Fit Kit # Y06170 is for the rear. Then you can install your Yakima BaseLine Towers Y00146 and then whatever Yakima crossbars you have.
  view full answer...
• Recommended Flush Mounted Roof Rack for a 2024 Hyundai Venue w/ No Roof Rails
  To add a flush roof rack to your 2024 Hyundai Venue with a naked roof you will need the following parts: Yakima BaseLine FX Roof Rack for Naked Roofs - Aero Crossbars - Aluminum - Black - Qty 2 item # Y27UV BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06170 BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06187 This aero bar roof rack system has a 165 lbs capacity. I recommend adding the Yakima Same Key System item # Y07204 to help prevent...
  view full answer...
• Yakima Roof Rack and Carriers to Transport 2 Kayaks on 2014 Nissan Sentra
  The Yakima round bar roof rack system made of parts # Y00408, # Y28TR, # Y03536, # Y06123 and # Y06170 is a confirmed fit on your 2014 Nissan Sentra and its 165-lb weight rating makes it suitable for transporting two typical kayaks. I have linked an installation video to illustrate that process. It is a good idea to check your Sentra owner's manual to make sure Nissan rates the roof with enough capacity for the actual weight of your two particular kayaks, plus the weight of the roof rack...
  view full answer...
• Compatibility of Malone MPG901 Cargo 12 Roof Cargo Box With 2020 Hyundai Venue
  The Malone Cargo 12 isn't a vehicle specific item. As long as the vehicle's roof rack crossbars are installed so their bar spread (center to center distance between front and rear crossbar) is between 25 and 27 inches apart, the Malone # MPG901 Cargo 12 roof cargo box would work great. If you don't already have a roof rack, I'd recommend the Malone AirFlow 2 crossbars for roofs with raised side rails, part # MPG215. If you don't have the raised side rails, Yakima has a rack fit that...
  view full answer...
• Roof Rack Recommendation for 2019 Kia Sorento With A Naked Roof
  Great news, the Yakima Baseline setup fits the 2019 Kia Sorento with a naked roof. You need BaseClip fit kit part # Y06170 and BaseClip fit kit part # Y06159. The clips are two different sizes because they are designed to fit the shape of the roof on the new Kia Sorento and do not fit the 2019 Hyundai Santa Fe- XL naked roof. You can use the BaseLine Towers part # Y28TR and the Yakima JetStream Aero bars part # Y00425. I have attached installation instructions for the Yakima Roof Rack...
  view full answer...
  
• Recommended Roof Crossbars and J-Style Kayak Carrier for a 2018 Toyota Corolla
  We have just what you need for your 2018 Toyota Corolla! I recommend checking out the Yakima JetStream Crossbars # Y00425 with the BaseLine Towers for Yakima Crossbars # Y28TR, & the BaseClip Fit Kit for Yakima BaseLine Roof Rack # Y06130 & # Y06170. These crossbars will easily attach to your Corolla's naked roof, has a 165-lbs weight capacity, and will allow you to use a set of J-Style kayak carriers like the Thule Compass Kayak Roof Rack w/ Tie-Downs # TH890000. Since you're interested...
  view full answer...
• Recommended Roof Rack for a 2019 Kia Sorento LX To Haul Kayaks
  The roof rack I recommend for a 2019 Kia Sorento LX is the Yakima JetStream Crossbar System part # Y00425, part # Y28TR, part # Y06159, and part # Y06170. The Jetstream Crossbar System is an excellent option which offers a direct bolt-on fit, custom molded to the shape of your roof. The aero shaped crossbars are very quiet and they offer the least amount of drag. The overhang on the crossbars will be perfect for carrying kayaks because you get the extra space needed for water-sport accessories. In...
  view full answer...
• Roof Rack Kit for a 2009 Honda Fit, 2003 Toyota Camry and a 2015 Nissan Sentra
  Though I strongly recommend buying an individual rack for each vehicle, you can build a modular Yakima kit for your three vehicles. I'm recommending Yakima because their crossbars have a full channel on the underside of the bar, letting them be fit to multiple vehicles without needing separate bars. The Toyota Camry requires the longest bar, so you'll fit this bar to the other vehicles. To do this, you'll need the following parts for all three vehicles: Yakima JetStream bar, 60 inches,...
  view full answer...
• Roof Rack Recommendation and Options for 2020 Kia Sorento with Naked Roof
  I attached a link to a page that has all of the roof racks we offer for your 2020 Kia Sorento, and yes the 2019 fits are the exact same. I really like the Yakima Jetstream roof rack part numbers # Y00425, # Y28TR, # Y06159, and # Y06170 as it gives you a very high quality aerodynamic roof rack that has top channels which allow for more flexibility when attach roof accessories. I attached an install video for this rack on a similar Sorento for you to check out as well.
  view full answer...
  
• Yakima Roof Rack Fit for 2019 Kia Sorento With Naked Roof
  I can absolutely help you out with all the parts you need to add a Yakima roof rack to your 2019 Kia Sorento. The rack, with you choice of black or silver crossbars, is made up of the following parts: - Yakima JetStream Crossbars # Y00425 - Yakima BaseLine Towers for Yakima Crossbars # Y28TR - BaseClip Fit Kit # Y06159 - BaseClip Fit Kit # Y06170 - Same Key System Lock Cores (Optional) # Y07204 This is a quiet, easy-to-use and very durable roof rack that is the best option for your 2019...
  view full answer...
• Roof Rack Recommendation for a 2019 Kia Sorento with No Rails
  For a complete roof rack system of a 2019 Kia Sorrento I recommend the Yakima JetStream roof rack which uses the following parts: - Yakima CoreBar Crossbars - Steel - Black - 50" Long - Qty 2 # Y00421 - BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 # Y28TR - BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 # Y06159 - BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 # Y06170 - (optional for extra security) SKS Lock Cores # Y07204 With this setup,...
  view full answer...
• Quiet Roof Rack for 2020 Hyundai Venue with Naked Roof
  There is definitely a roof rack from that will fit securely on your 2020 Hyundai Venue with a naked roof; the rack is made from Yakima which means it is really high-quality, and uses aero-shaped bars to ensure you have a quiet ride. The roof rack for your Venue consists of: - Yakima JetStream Crossbars # Y00425 - BaseLine Towers for Yakima Crossbars # Y28TR - BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y06170 and # Y06187 - Same Key System Lock Cores (Optional) # Y07204 The...
  view full answer...
• Can a 4 Bike Hitch Bike Rack be used on an Acura 2005 TL
  While you could use a Class I compatible 4 bike rack like # TH9025XT in the hitch on your 2005 Acura TL, you would be limited to 2 bikes when using the rack. This is because vehicles with Class I hitches can be damaged by the weight of the bikes being placed to far away from the back of the vehicle. The amount of torque that is applied to the hitch and vehicle frame is increased substantially as weight is added farther away form the vehicle. The only benefit would then be the ability to...
  view full answer...
• Cores For Yakima Baseline Towers on a 2020 Nissan Rogue Sport
  So you have the 48" Round Bars # Y00408, Baseline Towers # Y28TR, SL Adapter # Y03536, Base Clip # Y06123 and # Y06170. For the Baseline Towers, you'll need this locking core set # Y07204. You'll need to take the dummy core out and then take the dummy key to get the locking cores into place. They will all be keyed alike.
  view full answer...
• Using Existing Yakima Bars on a 2007 Buick LaCrosse
  It looks like the 2007 Buick LaCrosse uses the Yakima BaseLine Towers. For every Yakima crossbar set that is compatible with this LaCrosse, the towers are part # Y28TR, and the fit kit is the BaseClip Fit Kit, part # Y06170. These are the only parts you need for the JetStream Crossbars and the CoreBar Crossbars. If you have the Round Crossbars, you will also need the RoundBar SL Adapter, part # Y03536. If you have the HD Crossbars, you will also need the HD Bar SL Adapter, part # Y03541. If...
  view full answer...
• Roof Rack Needed with Level Crossbars for Transporting Plywood with 2019 Lexus ES 300h
  As long as you just have a sun roof on your 2019 Lexus ES 300h and it isn't the full-blown panoramic roof then we do have roof rack options for you. For your application I recommend going with the Yakima JetStream system because the BaseLine Towers that come with it have a few adjustments in them to help keep your crossbars level with each other. Other systems rely on rubber inserts for the fit kit but the Yakima system is mechanical and I believe it produces the best answer for your situation....
  view full answer...

Do you have a question about this Roof Rack?