Roof Rack Recommendation for 2018 Nissan Altima with Sunroof

Question

Question:

I have a 2018 Nissan Altima with a sunroof that I need a roof rack for.

asked by: Philip

0

Expert Reply:

For your 2018 Nissan Altima with a sunroof the Yakima roof rack part numbers # Y00421, # Y28TR, # Y06137, and # Y06127 is a confirmed fit and would work great. The only tech tip that Yakima states is that when open, the sunroof may interfere with some accessories. The aero shape of these crossbars will give you a very quiet ride and minimize fuel mileage loss.

expert reply by: Jameson C

0

Answer 1

The weight capacity of the Yakima CoreBar Crossbars like part #Y00421 is 220 lbs which is for loads evenly distributed across both bars. If you need a higher weight capacity, Yakima does off the HD Crossbars like part #Y01157 which have a 500 lb…

view full answer...

Answer 2

There are a couple of differences between the two. The JetStream bars like #Y00425 are made of extruded aluminum while the CoreBars such as the #Y00421 you've looked at are constructed of galvanized steel. As you've mentioned, the CoreBar has…

view full answer...

Answer 3

The difference between the Yakima Baseline towers and Skyline towers is the style of roof they are intended which in your case indicates how it would install. The Baseline kits are designed for naked roof and will use the door clamps. The Skyline…

view full answer...

Answer 4

The Rhino-Rack's Locking Fishing Rod Carrier #RR574F is great product that will work wonderfully for your application, you can't go wrong purchasing this product. This has universal mounting hardware that fits all popular roof rack bar…

view full answer...

Answer 5

Hey Joel, thanks for reaching out! Since the Yakima 60" HD Tracks #Y74MR are universal the instructions are somewhat vague on where to install them because each application will vary. The instructions are attached to this answer page but…

view full answer...

Answer 6

I reached out to my contact at Yakima regarding your older RocketBox and he said there aren't any adapters available that would allow the box to fit wider aero-style crossbars using its existing hardware. Your only option to keep using this…

view full answer...

Answer 7

In order to mount the Thule Motion XT XL #TH629806 on the factory flush rails of your 2017 Lexus GX 460, I recommend the Yakima CoreBar Crossbars - Steel - Black - 50" #Y00421. One of the great features of the CoreBars is that it combines the…

view full answer...

Answer 8

I have a great crossbar solution for you to use the Inno Locker #INXA445! For your 2004 Honda Accord 4-door with a naked roof, the Inno Locker will attaches as long as you have aero crossbars that have top channels that extend the length of the…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 11

Hey Kelvin, welcome back. To flat tow a 2026 Ford Maverick with your Demco Commander II Tow Bar item #DM9511012, I recommend the following parts: Baseplate Kit - Demco Tabless Base Plate Kit item #DM38CV Wiring Harness - Roadmaster Diode 7-Wire to…

view full answer...

Answer 12

Hey Mike, thanks for reaching out. Yes, it will! The Curt Mounting Bracket for 4-Pole Flat Trailer Connector #C42CR will match right up with the Curt No-Drill Bracket #C57202. You won't have to drill any new holes. The picture I included shows…

view full answer...

Roof Rack Recommendation for 2018 Nissan Altima with Sunroof

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching