To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
These heavy-duty, aluminum crossbars work with Rhino-Rack legs to create a sturdy roof rack. The square bars include built-in C-channels for mounting Rhino-Rack heavy-duty, contractor-grade accessories.
Features:
Rhino-Rack HD Crossbars - Silver - Qty 2:Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today on our 2012 Honda Fit we'll be test fitting the Rhino Rack 2500 Series roof rack with the arrow crossbars measuring fifty inches long in silver, part number DA126. We'll also be using the custom DK clamps and pads for the Rhino Rack 2500 series roof rack systems, part number DK154. With our roof rack system assembled according to the instructions, we'll begin our test fit by opening our front doors. We'll grab our front bar and place it onto the front part of our roof. To ensure that we have this bar in the correct location, we need to measure 270 millimeters, or 27 centimeters, from the center of our door jamb to the center of our foot plate. We'll do this measurement on both sides to ensure that our feet are in line with each other. We can then use an allen key to tighten the allen bolt, which will secure the clamps around the roof line of our vehicle. We'll make our way from passenger side to driver side, tightening a little at a time so we don't lose our position.
With that secure, we can open our rear doors and grab our rear bar and place it onto our roof. To ensure that we have this bar in the correct location, we need to measure 700 millimeters, or 70 centimeters, from the center of our front plate to the center of our rear plate. We'll do this measurement on both sides to ensure that our feet are in line with each other and that our bars are parallel. Once we have it set, we can use an allen key to repeat the same tightening process that we used at the front. With everything tight and secure, we can go ahead an install our black plastic covers over our foot packs. That completes today's test fit of the Rhino Rack 2500 Series roof rack system using part numbers DA126 and Dk154 on our 2012 Honda Fit. .
Average Customer Rating: 4.4 out of 5 stars (72 Customer Reviews)
These heavy-duty, aluminum crossbars work with Rhino-Rack legs to create a sturdy roof rack. The square bars include built-in C-channels for mounting Rhino-Rack heavy-duty, contractor-grade accessories.Here are some pics of the Rhino-Rack Heavy-Duty Roof Rack Crossbars - Silver - 50" Long - Qty 2 installed on my 2011 Honda CR-V.
That I recently purchased.
The rack fit well and was easy to install. Seems to be made well. The problem is the amount of road noise. I never even put the basket on. It was so loud, it roared. I repositioned it several times but the noise was way too much and I finally just removed it. I spent a lot of money for the rack and the basket and now they are in storage. I wish it would have worked out better because I thought it looked really good.
Ordered a Rhino Rack for my 2014 GMC Sierra 2500HD Denali. Rack arrived in very good shape and all items were there. Installing at this time and see no problems ahead.
Takes a little while to assemble the rack bars.
The stickers are great I can mark the positions after measuring the distance between the bars.
One of the screws is underneath the bar; it is hard to reach to tighten the bars.
Finally, I got the roof rack installed and it looks good.
Excellent customer service, all current manufacturers for this type of equipment is not available for purchase because Yakima, Thule, even Rhino Rack did mention from customer service representatives from these 3 companies states you are better off purchasing from a distributor such as E-trailer. This company definitely had the transfer equipment from a Yakima support base to a Rhino Rack crossbar system. I needed the additional load weight and Jaime from E-Trailer was extremely patient and helpful…seriously awesome customer service…also my package came 2 days earlier in this truck driver shortage too. Job well done.
Good quality and locks are included. The plastic lock covers are flimsy but they will keep an honest person honest.
The product is high quality and perfect for the 2013 Honda Fit Sport. The assembly is easy and fun. Read or watch the instructions first to avoid wasting time. The initial fitting on the roof is a bit finicky, but you only have to do it once. Use the included arrow decals and R & R is a breeze.
etrailer shipping was fast and their price was unbeatable. The follow-up emails were appreciated. Thanks for getting me out on my kayak again!
Rhino rack systems are really well-made & once you understand the instructions, it all goes together very smoothly. I’m knocking one star because both the instructions for ordering the fitting sets to fit vehicles AND the instructions for fit kits are needlessly confusing. I ordered a set for an ‘09 Corolla. I’m a handy guy; I’ve designed & built all manner of stuff. Rhino folks: design an online menu with clear menu choices to determine fit measurements for *one make/model*; those paper charts are baffling! Figuring out how they intersected with instructions took more time to understand than the actual assembly! Hire a UX specialist & have them redesign the whole fitting/instructions landscape. Got it in the end, but man, these make cabinet sets from Ikea look easy-peasy… and it doesn’t have to be that way! Everyone: installation is actually easier than the instructions.
Fairly straightforward to install. I had never installed a roof rack before and would characterize myself as average in the handiness department. It took me about a little over an hour. Feels super solid. Be sure to consult the correct DK Spec Sheet for measurements.
Just wanted to provide some feedback on the installation of the Rhino rack
rack and the Curt basket for my 2013 honda fit.
1) the roof rack went together easily- clear instructions, all the correct
parts etc. All Good
2) the basket is another story. Poor instructions at best! Poor hardware!
3) Roof rack spacing instructions tell you to place the bars 16.92" apart (
700mm-270mm=430mm )
For the basket clamps to line up with the rack bars, the rear bar needs to
move approximately 2" in order for the clamps to seat correctly on the rack
bars.
Basket instructions indicate the centers of the clamps must be 15, 22, or 29
inches apart for correct alignment.
I realize that the basket is a universal design, but the hardware just
sucks!
It would be nice if your company offered a mounting kit for this that worked
better.
Great service fast delivery all in all.
The Rhino Rack fits my 2009 Honda Fit perfectly and I am impressed with the construction and apparent durability. I am able to attach my L-shaped kayak brackets and travel safely to my destination. I recommend this product to others looking for a reliable rack but scared off by the high prices at Thule and Yakima. The only problem I had was with the crossbar endcaps. A key is required to lock them safely in place. The plastic key was delivered in the runner space in the crossbar and no mention was made of this in the instructions. Subsequently I did not identify them as the required keys and had to contact the manufacturer for clarification.The pictures of the crossbars on the product packaging and in the installation instructions were different than the endcaps I received. Once this was resolved all proceeded smoothly. I recommend this rack to all.
I ordered this package along with the Rhino Roof Rack with Aero Crossbars; the specs provided by eTrailer made assembly completely trouble-free. Mounting the rack on my particular vehicle (Honda FIT) for the first time took precision; but future mounting will be completely effortless with the markings.
What's more, delivery of my purchase was FAST and FREE. I placed my order on a Wednesday; it was shipped on Thursday and I had my order by Monday (particularly important in my case - since I was going camping that following weekend).
Very happy with purchase.
This kit is easy to slap on and sturdy enough to balance my skis and snowboards. I recently used the Rhino Rack on a three hour drive to a ski resort and had no issues.
Whenever I do research on a product or service, I check out what kind of negative comments are being said about that product or service. There wasn't a lot of negative comments about this product. I found most of the negatives to be very minor, and the one that was 'kind of' a consensus was that the instructions were difficult to follow. I'm not a smart person, and my reading comprehension is atrocious, but I took my time, and it was the easiest surf rack installation I've ever done.
This loader is amazing...I easily load a 4' x 14' Sunfish sailboat at 120lbs easily without damaging my 2005 Nissan Armada...super sturdy...exactly as advertised. Note:. I order the extra heavy bar and did not need it! Now I take my sailboat with me while I pull my travel trailer. You won't be disappointed. Etrailer ROCKS IN CUSTOMER SERVICE...THEY HUNTED DOWN ALL INFO NEEDED TO MAKE THE PURCHASE...give DENA W a big raise!!!!!!
The Rhino rack has been working well. It is a relief to get my ladder out of my car and to be able to use the back seat.
This rack works perfectly on my Nissan Versa for carrying my two Perception Sound 9'6" kayaks. The Rhino-Racks look good to me. The kayaks can rest directly on the rubber pads on the rails, unlike the Yakama racks I had in the past that had bare pipe rails. Also, I expect I can buy parts to adapt this product to a different car without having to buy new towers. I am sorry there are not hooks or loops to attach bungees when carrying lumber. They are noisy in the wind, but less so when carrying the kayaks.
This is my second Rhino-Rack. They go on very easily and hold the bikes/kayaks and even an extension ladder very well....thanks for a great product
Two items I received surprised me when I unpacked the box were the rails because they were not black like I saw in the picture, and the rubber insert that I am having a hard time sliding in the rail. Should this rubber insert have come already installed in the rail or is there a top on how to put in with ease?
Product exactly as described. Worked perfectly to attach rack to our Honda Fit.
Thanks to Etrailer, I am ready to do some serious summer exploring with my 2013 Mazda 3! Rhino Racks, Malone top box, and Kuat bike rack!
Great product everything fit perfectly. With the heavy duty bars almost all the hardware for anything you put on the rack is too short
I got the roof rack mounted anyways. Better pics to come when it's all finished!
Needed the Rhino-Rack parts and they were delivered when promised. Great service.
Directions were clear and the clamps fit perfect with the Rhino Rack.
Fairly easy to install.
Do you have a question about this Roof Rack?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.