See what our Experts say about this Rhino Rack Roof Rack

• Will the Heavy Duty Rhino-Rack Roof Rack Fit a 2015 Nissan NV 3500?
  I have a great alternative for your crossbar setup. Unfortunately, the Rhino-Rack Roof Rack for Thule and Yakima Tracks # Y01-140B-NT is not confirmed to fit your 2015 Nissan NV 3500. However, we do carry a similar heavy duty bar setup by Rhino-Rack that does fit your 2015 Nissan NV 3500. For this setup, I recommend the following parts: - Rhino-Rack Heavy-Duty Roof Rack Crossbars # RB1375B-2 - Rhino-Rack 2500 Series Legs for Heavy-Duty Crossbars # RRRLKHD - Custom DK Fit Kit for 4 Rhino-Rack...
  view full answer...
  
• Rhino Rack Tower and Crossbar Compatibility with Thule Factory Installed Tracks on Truck Cap
  Yes. The Thule tracks will accept the Rhino-Rack feet and crossbars. The kits like the Rhino-Rack Roof Rack for Factory Tracks - 2 Vortex Aero Crossbars - Black - 54" Long # Y02-480B-NT will work well, or you can piece together the parts you desire. The really nice aspect of Rhino-Rack towers is they come with the included locks and are great quality at a really good price point. To piece together your kit, you will use the Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars - RTC...
  view full answer...
  
• Mounting Options for Rhino-Rack Fishing Rod Carrier RR576F
  The Rhino-Rack Fishing Rod Carrier # RR576F offers multiple installation options. It can mount to a roof rack by clamping around the rack crossbars (round, square, aero, elliptical, and most factory crossbars) or it can be installed in the top channel of rack crossbars like # RRVA126B-2 and # RB1375B-2 using the included T-bolt hardware shown in the photo which slide into the top channel of such bars. Only if used in the heavy-duty Rhino-Rack bars is the Fit Kit # HD-FK1 needed. The standard...
  view full answer...
  
• Rhino-Rack Heavy-Duty or Vortex Crossbars for 2019 Ford Transit Connect
  The primary difference between the Rhino-Rack Heavy-Duty Crossbars and the Rhino-Rack Vortex Aero Crossbars has to do with what they are designed to carry and what accessories work well with them. The Heavy-Duty Crossbars feature built-in C-channels that are made specifically for Rhino-Rack Heavy-Duty accessories like the Hi-Lift Jack Mounting Brackets # RJHB. Because the bars are larger than most other systems they will not be compatible with a lot of accessories that aren't specifically...
  view full answer...
  
• Rhino-Rack Roof Rack Recommendation for a 1989 Mitsubishi Montero with a Naked Roof
  You are correct, the Rhino-Rack Roof Rack Legs that you need for your 1989 Mitsubishi Montero are part # RL280S4. These are the gutter mount feet and they are 11 inches tall. For crossbars, you can use their Heavy-Duty Crossbars, # RB1375B-2 for black or # RB1375 for silver. I have attached the installation instructions for you to check out.
  view full answer...
  
• What Tie Downs Can I Use With The Yakima LockNLoad # Y05044
  The Ladder Pegs for Rhino-Rack Heavy-Duty Crossbars - 3" Tall # RSLP will not fit in the tracks of the Yakima LockNLoad Platform Roof Tray # Y05044, but I have something similar that you can use with the LockNLoad. The Ladder Pegs are made to fit in the rhino rack heavy duty crossbars # RB1375B-2. You can use the Yakima Eye Bolts # Y01162 with the lock in load on your 2019 Jeep Grand Cherokee.
  view full answer...
• Do Rhino Rack Vortex Crossbars Have an Upward Curvature?
  The Rhino-Rack Vortex Bars are slightly bowed in the longer bar options to help support the weight when applied to the center of the bar. Most manufacturers have this as a part of the aero bar design. If you want a more straight bar, then you will want to instead use the heavy duty bars like # Y01-120B-NT for the track system or # RB1375B-2 for just the crossbars. There are longer bars like # RB1500B-2 and # RB1650B-2 if desired.
  view full answer...
• Affordable Way To Carry A Kayak On A 2010 Hyundai Sonata
  I have an affordable solution for you, however, the Rhino-Rack Heavy-Duty Roof Rack Crossbars - Black - 54" Long - Qty 2 # RB1375B-2 is not a fit for your 2010 Hyundai Sonata and even if it was, you would need to also buy a few other parts to fit it onto a vehicle so it would not be the price you were looking at. For your vehicle with a naked roof, the SportRack Semi-Custom Roof Rack 50" # SR1002 is going to be your best option. This square bar roof rack includes everything necessary...
  view full answer...
• Are There Rails Available For Installing a Roof Rack on a Vehicle
  We do have rails like the Rhino-Rack RTC-Style Roof Rack Tracks # RTC14 which mount to naked roof vehicles. They are typically used for camper shells or truck bed rails, but can be used on a vehicle if you are willing to drill into the roof. These rails will allow you to use Track Mount RLTF Legs # RLTF and Rhino-Rack Heavy-Duty square and Aero oval crossbars like the Rhino-Rack Heavy-Duty Roof Rack Crossbars # RB1375B-2 or the Rhino-Rack Vortex Aero Crossbars # RRVA126B-2. There are...
  view full answer...
• Roof Rack and Platform Recommendation for Roof of 2013 Toyota Highlander
  I have a solution for you, you'd want the Rhino Rack HD roof rack part # RB1375B-2, # RRRLKHD, and # DK138 which will allow you to use a Pioneer Platform Tray part # RR42112BF with the adapter part # RR43105. This has a lower capacity listed for what you are wanting to do but that's based on the application of it being used on the highway. For a situation like yours where the weight won't be bouncing around this would work well assuming your Highlander also has a similar weight capacity....
  view full answer...
• Tonneau Cover and Rack Options for 2007 Honda Ridgeline
  The tonneau cover manufacturers do offer some covers for other trucks that have the T-slots in the side rails that can be used tor installing a ladder rack like the Yakima OverHaul HD, but unfortunately they don't offer anything like this for your 2007 Honda Ridgeline. If the 165 lb capacity of a standard roof rack would work for you, your best bet would be to go with a tonneau cover like the BAK BAKFlip F1 you'd looked at, part # BAK72601 and use a roof rack on the vehicle. I'd recommend...
  view full answer...
• Roof Rack and Canoe Carrier Recommendation for a 2008 Chevy Silverado
  A Rhino Rack Roof Rack that includes the part # RRRLKHD would do an excellent job for carrying a 15 foot canoe on your 2008 Chevy Silverado. The rest of the parts needed to complete the roof rack would be the part # RB1375B-2 and # DK227. This is one of the strongest racks we offer so it would definitely take a lot of abuse. It would be great for carrying your canoe. For securing a canoe upside down on the crossbars I would recommend the Ratchet Grab part # RRRRG. I spoke to my contact...
  view full answer...
• Weight Capacity and Comparison of Rhino Roof Racks for a 2011 Acura RDX
  I spoke with my contact for Rhino Rack and he said the weight capacity for all Rhino-Rack roof racks for your 2011 Acura RDX is 110 lbs. I think you were looking at the Rhino-Rack Heavy-Duty roof rack with the Heavy-Duty crossbars, # RB1375, the leg kit, # RRRLKHD, and Custom DK Clamps and Pads, # DK177. The Heavy-Duty crossbars will have a higher weight capacity, but once they are installed on a 2011 Acura RDX, the entire roof rack capacity drops to 110 lbs due to the limitations on the...
  view full answer...
• Are the Rhino-Rack Track Mount RLTP Legs Compatible with Yakima Tracks
  We had the Rhino-Rack Track Mount RLTP Legs, # RLTP, and the Yakima tracks in stock so I pulled them from our warehouse and made a short video for you. I do have a solution for you, however the Rhino-Rack feet are not compatible with the Yakima tracks. Instead, I recommend using the Rhino-Rack RTC Tracks, # RTC14. These tracks are 55 inches long and are compatible with the RLTP legs. They are also more economically priced over the Yakima tracks which will save you some money. I have...
  view full answer...
• Do I Have To Drill Afer Installing The Tracks On The Rhino Rack Roof Rack System # Y01-120-NT?
  The foot # RRRLKHD to crossbar # RB1375B-2 is adjustable along the bar with the kit you're looking at # Y01-120B-NT. The only drilling required is to install the tracks so if they are already installed no need to do any more drilling.
  view full answer...
  
• Roof Rack for 2009 Jeep Wrangler Unlimited With Aftermarket Hard Top to Transport 2 Kayaks
  The roof racks that we offer for the 2009 Jeep Wrangler Unlimited, such as the Rhino-Rack System consisting of parts # RB1375B-2, # RLT500 and # RTC95JW, are intended for use on the OEM hardtop. This system when mounted on the factory hardtop has a maximum cargo weight capacity of 65-lbs. This limit is not a function of the rack materials, but rather the capacity of the OEM roof, and therefore is the same for all other roof racks we offer for your Wrangler. Without knowing the brand and...
  view full answer...
• Recommended Rhino-Rack Crossbars that fit a 2017 Ford C-Max
  I believe the measurement you're looking at is referring to the HD Bars # RB1375B-2 which you don't have, however I can say with certainty that the Rhino-Rack ROC25 Roof Rack for Naked Roofs - Vortex Aero Crossbars # RR25SR will fit your 2017 Ford C-Max just fine. The front crossbars measure 43-9/16" long x 3-1/8" wide x 1-3/16" tall, and the rear crossbars measure 41-3/8" long x 3-1/8" wide x 1-3/16" tall.
  view full answer...
• Roof Rack for 2014 Chevy Silverado 2500 that Could Have Tepui Tent Installed
  I looked up the Tepui Tents and they basically attach to roof rack crossbars like the Rhino Rack roof rack part numbers # RB1375B-2, # RRRLKHD, and # DK227 that you referenced. The only issue you may encounter is that this rack has a weight capacity of 130 lbs.
  view full answer...
• Half Rhino-Rack HD Roof Rack for a 2015 Chevy Colorado Crew Cab with Naked Roof
  In order to get half of a Rhino-Rack roof rack for your 2015 Chevy Colorado we just have to piece together the parts. For a single bar you will need # RB1375B. For just 2 feet instead of 4 you will need # RRRLKHDH. And you will need custom clamp kit, # DK330, which is all 4 of the clamps and pads but they are not available individually so you would have to get the whole kit and just use 2 of them.
  view full answer...
• Using a Rhino-Rack Roof Rack to Go Off-Road on a 2016 Chevrolet Colorado
  The Rhino-Rack ROC25 Vortex # RR93GR is an aerodynamic, low profile rack. I verified with Rhino-Rack that the bars are just as strong as the Rhino-Rack heavy-duty racks, however since the bars fit directly into the feet and do not have any over hang there is more weight being forced directly down onto the center of the bars and less weight being distributed across them. For a more rugged roof rack I suggest the 2500 Heavy-Duty Rack that consists of the 54 inch crossbars # RB1375B-2, the...
  view full answer...
• 2013 Pathfinder Naked Roof Roof Rack Recommendation
  For your 2013 Nissan Pathfinder the Sportrack Semi-Custom roof rack part # SR1002 has not been confirmed to fit your vehicle, BUT I do have a similar roof rack that would work for you. Instead you would want the Rhino Rack roof rack that consists of part numbers # RB1375B-2 and # CXB if you are looking for the most economical roof rack option around.
  view full answer...
• What Parts do I Need with My Rhino-Rack 54" HD Crossbars to Fit on My 2012 Ford Edge with Bare Roof?
  According to my research of your Rhino-Rack part number 1375, I think you are most likely referring to the Rhino-Rack Heavy Duty Crossbars -54" Long # RB1375B-2 (black) or # RB1375 (silver) which are confirmed to fit a bare-roof 2012 Ford Edge. If this is what you have, you need the Rhino-Rack 2500 Series Legs # RRRLKHD and the Custom DK Fit Kit for 4 Rhino-Rack 2500 Series Roof Rack Legs - Naked Roof # DK228. With both of these components, you will have a full roof rack system on your...
  view full answer...
• Track Mount vs. Fixed Mount Rack For Tonneau Cover on 2021 Ford F-150
  Those are good questions, and you will indeed lose quite a bit of functionality going with a fixed rack system compared to a track mounted rack. The reason for that is simply that you'll have the ability to move the crossbars to accommodate whatever it is you need to carry, and depending on what that accessory may be, it won't be able to mount unless your crossbars have a specific spread distance. There is not a desired optimum spacing, that is completely up to you and what you are looking...
  view full answer...
• Will Rhino-Rack Ski and Snowboard Carrier Fit Exposed Racks Crossbars on Jeep Wrangler
  The Rhino-Rack Ski and Snowboard Carrier # RR573 will fit your Exposed Racks Roof Rack crossbars. The reason the # HD-FK1 adapter is required for the square Rhino-Rack bars like # RB1375B-2 is because of their 1-7/8" height. The Exposed Racks crossbars are only 1-1/4" x 1-1/4" so you won't have a problem installing the ski/snowboard carrier.
  view full answer...
• Rhino-Rack Rivet Mounted Roof Rack for 2020 Winnebago View 24V
  You can use rivet-mounted tracks to install a Rhino-Rack roof rack on your 2020 Winnebago View 24V motorhome, I'd just recommend paying special attention to sealing the roof where the rivets are. What you need first are the tracks, and with such a long roof, you can pick the length that works for you: - Rhino-Rack RT-Style Roof Rack Tracks - Rivet Mount - 39-3/16" Long # RRRTS534 - Rhino-Rack RT-Style Roof Rack Tracks - Rivet Mount - 58-1/2" Long # RTS502 - Rhino-Rack RT-Style Roof Rack...
  view full answer...
  
• 2019 Dodge Grand Caravan Permanent Install Roof Rack
  For a permanent roof rack installation, the Rhino-Rack RT-Style Roof Rack Tracks - Rivet Mount - 58-1/2" Long - Qty 2 # RTS502 can be used. Then you will want the Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars - RTC and RT Roof Rack Tracks - Qty 4 # RRRLT600. Finally you will want the Rhino-Rack Vortex Aero Crossbars - Aluminum - Silver - 59" Long - Qty 2 # RRVA150S-2 or black # RRVA150B-2.
  view full answer...
• What Size Rivets Does Rhino Rack RT Style Track Use
  While we don't offer the replacement rivets needed with the # RTS502 we do know that the size is 1.6mm - 6.3mm rivets which is a common size you could find locally.
  view full answer...
• Best Roof Track System to Add Rhino-Rack Pioneer Platform to a 2002 Chevy Tahoe Z71
  On the 60 inch long Thule tracks # THTB60 the screws are M5x40mm. But the Thule tracks are designed for use on fiberglass only (like camper shells) and not metal roofs so I cannot recommend them. You mentioned not wanting to use the cap nut system on the Yakima 60 inch tracks # Y01135 but that works out because there is a special kit needed to install the tracks on a metal roof, # Y8880039, and would require 1/4 inch holes. The tracks are aluminum. But the special feet used for the Yakima...
  view full answer...
• Camper Shell Roof Rack for 2011 Toyota Tacoma Double Cab Longbed
  We offer several lengths of Rhino-Rack's RT-Style Rivet-Mount Roof Rack Tracks including parts # RTS502 (58-1/2-inches) # RTS506 (67-3/4-inches) # RRRTS546 (87-3/16-inches) Other RT track lengths are available too. Once you find your preferred track length you can select two sets of Legs such as # RLTF and Rhino-Rack's Heavy-Duty Crossbars. The bars are also available in various lengths: # RB1120S (44-inches) # RB1250S (50-inches) # RB1375S (54-inches) It is a good idea to check with...
  view full answer...
• Additional Feet and Crossbar For Rhino-Rack Heavy Duty Roof Rack on 2013 Land Rover LR4
  Hey John! We don't have a variation that comes with three but you can add an additional crossbar and feet to the # RR59QE. You will need the Rhino-Rack Heavy-Duty Roof Rack Crossbar - Silver - 54" Long # RB1375S along with the Track Mount RLTP Legs # RLTP. What do you plan on using the roof rack for?
  view full answer...
• Rhino-Rack Roof Rack for Truck Cap Track System
  For your truck topper with existing track system, I recommend the Track Mount RLTP Legs for Rhino-Rack RTC- and RT-Style Roof Rack Tracks - 2" Tall - Qty 2 # RLTP along with the Rhino-Rack Heavy-Duty Roof Rack Crossbars - Black - 65" Long # RB1650B-2. If you prefer the vortex style bars then use Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars - RTC and RT Roof Rack Tracks - Qty 4 # RRRLT600 and # RRVA165B-2.
  view full answer...
• Rhino-Rack Pioneer Platform Recommendation for Sunseeker Awning on Leer Camper for 2019 Sierra 2500
  I recommend using the 60" Long x 49" Wide Rhino-Rack Pioneer Platform Rack # RR35TB along with two pairs of the Track Mount # RLTP Legs which are designed to fit the Thule track system on the Leer camper for your 2019 GMC Sierra 2500. This then gives you the ability to use the Sunseeker Awning # RR32133 and then use the following extensions: 43 Sq Ft - # RR32112 48 Sq Ft - # RR31101
  view full answer...
• 2008 4 Runner Sport Rhino Rack Roof Rack Options
  Hello Howard. If you're planning on removing your roof rack completely you will need to drill into your roof to install another type of rack. The Rhino-Rack RT Style Roof Tracks # RRRTS502F will give you a lot of options for roof racks once installed. You will need to get the # RLTP Legs and of course the bars of your choosing. You could get the Rhino Rack HD Bars # RB1650B-2 or a Pioneer Platform Rack # RR27AP. These will mount directly to the RLTP feet. If it were me, I would 100%...
  view full answer...
  
• Can the Rhino-Rack RTC-Style Roof Rack Tracks Part # RTC16 be Installed at an Angle
  The Rhino-Rack RTC-Style Roof Rack Tracks part # RTC16 will need to be installed on a flat surface. If the tracks are not installed on a flat level surface then the tracks will rock and pivot back and forth creating a weak point in the water seals. If the tracks pivot then the crossbars will not attach to the mounting feet. You will want to use the Track Mount Legs for Rhino-Rack part # RLTP, part # RLTF, or part # RLT500 for this track system in addition to a crossbar that is compatible...
  view full answer...
• Is There A Yakima Landing Pad That Works With A Rhino Rack Rail And What Are My Options
  I may have a potential solution for you, but there is not a Yakima landing pad that is compatible with the Rhino rack tracks. If you need to mount crossbars to Rhino Rack brand tracks, you would need Rhino rack bars, and towers. I recommend using the #RLTP for the legs, the Aero bar adapter # RRVA-FK1-2, and a set of crossbars like the # RRVA150B-2. This is a 59" crossbar. I see that you were searching for parts for a 2021 F-150. If so, these crossbars will be the correct size for the...
  view full answer...
• Can Rhino-Rack Vortex Aero Crossbars Be Cut to Size
  It is possible to cut the Rhino-Rack crossbars but I do not recommend this as it will certainly void the warranty. Since we offer Rhino-Rack's Vortex Aero bars in various lengths you can simply choose the individual parts you prefer to make up your rack in the dimensions you prefer. Since you want to end up with bars that are about 44-inches long I suggest part # RRVA118S-2. This is a set of silver Vortex Aero bars that come in that 44-inch size. With these you can use the 63-inch tracks...
  view full answer...
• Can I Cut The Rhino Rack RTC Track Down To The Size I Need and Available Lengths Of Track
  Yes, the 63" Rhino-Rack RTC-Style Roof Rack Tracks - Channel Mount part # RTC16 can be cut down to the size you need as long as you cut them perfectly straight to allow the end caps to go back on because at this time we do not carry them as a replacement part. The tracks are available in different lengths as well. Rhino-Rack RTC-Style Roof Rack Tracks - 31-1/4" Long # RRRTC8JWMY11 Rhino-Rack RTC-Style Roof Rack Tracks - 31-1/2" Long # RTC8JW Rhino-Rack RTC-Style Roof Rack Tracks - 37-1/2"...
  view full answer...
• Can Rhino-Rack RTC Roof Rack Tracks be Cut to a Certain Length
  You could trim the Rhino-Rack roof rack tracks # RTC14 if you needed or wanted to. Just make sure that the cuts are perfectly straight up and down so the end caps will fit properly. Rhino-Rack does offer the tracks in other lengths. The shortest set is # RTC8JW at 31-1/2 inches long. If you need a specific size I can check to see if we have an exact match. The tracks are compatible with Rhino-Rack RLTP legs # RLTP, RLCP legs, # RLT500, and RLTF legs, # RLTF.
  view full answer...
• Attaching Rhino-Rack RTC-Style Roof Rack Tracks To Bed Rail Of 2019 Tacoma With A 5 Foot Bed
  The Rhino-Rack RTC-Style Roof Rack Tracks # RTC16 are meant to be mounted on the roof of a camper shell, but I see no reason why you couldn't mount them to the bed rails of your 2019 Toyota Tacoma. The only problem I see is that you have a 5 ft bed and the rails are 63 inches long. You will have to trim these tracks to match the length of your bed. In regards of the installation. It will come with all the hardware you need to install correctly. The only other part of the system that you...
  view full answer...
• Are Rhino-Rack Adapters or Spacers Required for RLTP Legs to Bolt Onto a Pioneer Platform?
  I reached out to my contact at Rhino-Rack and there are no adapters or spacers required to use the Rhino-Rack Track Mount RLTP Legs for Factory Roof Rack Tracks - 2" Tall - Qty 2 # RLTPMV with the Pioneer platform. They said instead you may want to use a pioneer platform like # RR35TB and legs # RLTP (x2) which would work well with the roof tracks.
  view full answer...
  
• Fitting Larger Rhino Rack Pioneer Platform to Leer Topper with Thule Tracks
  You could use the Rhino Rack Pioneer Platform # RR35TB which is 60 by 49 inch and then for feet that would attach it to your Thule roof rack tracks all you'd need is two sets of the Rhino Rack RLTP Legs part # RLTP and you'd be set.
  view full answer...
• Can Rhino Rack Pioneer Platform Fit on Top of Truck Bed Camper
  There are several different ways to install a Rhino-Rack Pioneer Platform Rack on the roof of your truck bed topper. I recommend using the track system as this will work the best for your application. In order to install the Rhino-Rack Pioneer Platform Rack part # RR75TB you will also need to install a set of tracks such as the Rhino-Rack RTC-Style Roof Rack Tracks part # RTC14 and then legs # RLTP (x2). The tracks once installed will give you a very versatile mounting system on the roof...
  view full answer...
• Recommended Heavy Duty Roof Rack for 2016 Ford F-150
  I may have a solution for you, however I don't recommend trimming the Rhino-Rack RT-Style Roof Rack Tracks like the 58 Inch # RRRTV148 that you referenced. These strips do feature pre-cut holes for the rivets so trimming any portion of the units will essentially change the way they are meant to attach. You would also need to make sure that the cuts are perfectly straight up and down so the end caps will fit properly. We do have shorter lengths available, such as the 36-1/4 inch # RRRTS540,...
  view full answer...
• Rhino-Rack Pioneer Platform Cargo Carrier For Rails On Truck Topper
  The Quick Mount Leg Spacers for Rhino-Rack Pioneer Platforms - Qty 4 # RRQMPS10-4 are designed to be used with the Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars - RTC and RT Roof Rack Tracks - Qty 4 # RRRLT600. You can then add a pioneer platform like # RR42115BF. If you want to forgo the pieces, the Rhino-Rack Pioneer Platform Rack - Track Mount - 60" Long x 49" Wide # RR35TB along with # RLTP (x 2) to mount the platform directly to the track rails. If your truck topper doesn't...
  view full answer...
• Parts Needed to Mount a Rhino Rack Pioneer Platform to a Truck Topper
  I have a solution for you, but there are not brackets to mount the Rhino Rack Pioneer platforms directly to your truck topper. I recommend adding a track system to the roof of your topper. You will use the Rhino-Rack RTC-Style Roof Rack Tracks # RTC14 to provide the tracks and then use the Track Mount RLTP Legs for Rhino-Rack RTC- and RT-Style Roof Rack Tracks # RLTP (x2) to mount the platform to the tracks.
  view full answer...
• How to Use the Rhino-Rack Pioneer Platform Rack on the Roof of a Truck Bed Topper
  There are several different ways to install a Rhino-Rack Pioneer Platform Rack on the roof of your truck bed topper. I recommend using the track system as this will work the best for your application. In order to install the Rhino-Rack Pioneer Platform Rack part # RR35TB you will also need to install a set of tracks such as the Rhino-Rack RTC-Style Roof Rack Tracks part # RTC14 and then legs # RLTP (x2). The tracks once installed will give you a very versatile mounting system on the roof...
  view full answer...
• Rhino Rack Roof Rack System for 1992 Chevy Suburban with Naked Roof
  Part # RRRTV208 works for your application. You need part # RLTP and part # RRVA137S-2. This is a universal roof rack system and most people don't like drilling into the roof. Personally I would go with part # 298-SX6000B for your Suburban. This is a universal system and can be used on other vehicles you might have.
  view full answer...
• Are the Rhino-Rack Track Mount RLTP Legs Compatible with Yakima Tracks
  We had the Rhino-Rack Track Mount RLTP Legs, # RLTP, and the Yakima tracks in stock so I pulled them from our warehouse and made a short video for you. I do have a solution for you, however the Rhino-Rack feet are not compatible with the Yakima tracks. Instead, I recommend using the Rhino-Rack RTC Tracks, # RTC14. These tracks are 55 inches long and are compatible with the RLTP legs. They are also more economically priced over the Yakima tracks which will save you some money. I have...
  view full answer...
• Will Thule AeroBlade Crossbars Fit Rhino-Rack RLTP Legs for a Range Rover Sport
  The Thule AeroBlade crossbars will not fit the Rhino-Rack RLTP legs, # RLTP. These legs are designed for Rhino-Rack heavy duty square bars. Also, different vehicles take different length bars so there is no guarantee that the length of the AeroBlade bars is sufficient for the Range Rover Sport. If you could tell me the year of your Range Rover Sport I could determine the length of the bars you would need and then you could get the appropriate Rhino-Rack feet and bars.
  view full answer...
• Can I Install Heavy Duty Rhino-Rack Crossbars on a Pop Up Camper Roof
  To be able to mount the Rhino-Rack Heavy-Duty Roof Rack Crossbars, part # RRRB2000S-2, you can use the Rhino-Rack RT-Style Roof Rack Tracks, part # RRRTV128, along with some legs for the crossbars to mount on. The Roof Rack Tracks will allow you to move the legs back and forth along the roof to accommodate what you are needing to carry. If the 50 inch track is too long or short for you I am including a link to our product page that has all of the tracks on it. The 2 leg options that we...
  view full answer...
• Correct Rhino Rack RTC Style Track System For A 2016 Chevrolet Silverado 1500
  If you're wanting to put these tracks # RTC16 on your 2016 Chevrolet Silverado, you can get these legs # RLTP that will fit into the tracks. These will work with the Rhino Rack Heavy Duty Crossbars # RB1650B-2.
  view full answer...
• Aero-Style Roof Rack Options for a 2011 Land Rover Range Rover Sport
  The Rhino-Rack Roof Rack for Factory Tracks # Y02-490B-NT is designed to mount on tracks that sit on the roof like you see in the attached picture. Please note that if you have the factory tracks on your 2011 Land Rover Range Rover Sport the only confirmed fit from Rhino-Rack is the Rhino-Rack RSP Roof Rack # RSPT508. If you don't have the roof rails then you can either use parts # RRVA137B-2, # RLTP, # RTS508, and # RRVA-FK1-2 to add the roof rails and the same type of roof rack that...
  view full answer...
  
• Will the Rhino-Rack RTC-Style Roof Rack Tracks # RTC95JW Fit a 1998 Jeep Wrangler with Hardtop
  The 37-1/2" long Rhino-Rack RTC-Style Roof Rack Tracks # RTC95JW are a universal fit so as long as your 1998 Jeep Wrangler Sahara has a naked roof that is flat then they will fit. The tracks provide mounting points for the Rhino-Rack # RLTP, # RLTF, and # RLT500 track-mounted legs. These are compatible with the Heavy-Duty Rhino-Rack Bars like the 50" long # RB1250.
  view full answer...
• Additional Feet and Crossbar For Rhino-Rack Heavy Duty Roof Rack on 2013 Land Rover LR4
  Hey John! We don't have a variation that comes with three but you can add an additional crossbar and feet to the # RR59QE. You will need the Rhino-Rack Heavy-Duty Roof Rack Crossbar - Silver - 54" Long # RB1375S along with the Track Mount RLTP Legs # RLTP. What do you plan on using the roof rack for?
  view full answer...
• Rhino-Rack Roof Rack for Truck Cap Track System
  For your truck topper with existing track system, I recommend the Track Mount RLTP Legs for Rhino-Rack RTC- and RT-Style Roof Rack Tracks - 2" Tall - Qty 2 # RLTP along with the Rhino-Rack Heavy-Duty Roof Rack Crossbars - Black - 65" Long # RB1650B-2. If you prefer the vortex style bars then use Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars - RTC and RT Roof Rack Tracks - Qty 4 # RRRLT600 and # RRVA165B-2.
  view full answer...
• Rhino-Rack Pioneer Platform Recommendation for Sunseeker Awning on Leer Camper for 2019 Sierra 2500
  I recommend using the 60" Long x 49" Wide Rhino-Rack Pioneer Platform Rack # RR35TB along with two pairs of the Track Mount # RLTP Legs which are designed to fit the Thule track system on the Leer camper for your 2019 GMC Sierra 2500. This then gives you the ability to use the Sunseeker Awning # RR32133 and then use the following extensions: 43 Sq Ft - # RR32112 48 Sq Ft - # RR31101
  view full answer...
• 2008 4 Runner Sport Rhino Rack Roof Rack Options
  Hello Howard. If you're planning on removing your roof rack completely you will need to drill into your roof to install another type of rack. The Rhino-Rack RT Style Roof Tracks # RRRTS502F will give you a lot of options for roof racks once installed. You will need to get the # RLTP Legs and of course the bars of your choosing. You could get the Rhino Rack HD Bars # RB1650B-2 or a Pioneer Platform Rack # RR27AP. These will mount directly to the RLTP feet. If it were me, I would 100%...
  view full answer...
  
• Can the Rhino-Rack RTC-Style Roof Rack Tracks Part # RTC16 be Installed at an Angle
  The Rhino-Rack RTC-Style Roof Rack Tracks part # RTC16 will need to be installed on a flat surface. If the tracks are not installed on a flat level surface then the tracks will rock and pivot back and forth creating a weak point in the water seals. If the tracks pivot then the crossbars will not attach to the mounting feet. You will want to use the Track Mount Legs for Rhino-Rack part # RLTP, part # RLTF, or part # RLT500 for this track system in addition to a crossbar that is compatible...
  view full answer...
• Is There A Yakima Landing Pad That Works With A Rhino Rack Rail And What Are My Options
  I may have a potential solution for you, but there is not a Yakima landing pad that is compatible with the Rhino rack tracks. If you need to mount crossbars to Rhino Rack brand tracks, you would need Rhino rack bars, and towers. I recommend using the #RLTP for the legs, the Aero bar adapter # RRVA-FK1-2, and a set of crossbars like the # RRVA150B-2. This is a 59" crossbar. I see that you were searching for parts for a 2021 F-150. If so, these crossbars will be the correct size for the...
  view full answer...
• Can Rhino-Rack Vortex Aero Crossbars Be Cut to Size
  It is possible to cut the Rhino-Rack crossbars but I do not recommend this as it will certainly void the warranty. Since we offer Rhino-Rack's Vortex Aero bars in various lengths you can simply choose the individual parts you prefer to make up your rack in the dimensions you prefer. Since you want to end up with bars that are about 44-inches long I suggest part # RRVA118S-2. This is a set of silver Vortex Aero bars that come in that 44-inch size. With these you can use the 63-inch tracks...
  view full answer...
• Can I Cut The Rhino Rack RTC Track Down To The Size I Need and Available Lengths Of Track
  Yes, the 63" Rhino-Rack RTC-Style Roof Rack Tracks - Channel Mount part # RTC16 can be cut down to the size you need as long as you cut them perfectly straight to allow the end caps to go back on because at this time we do not carry them as a replacement part. The tracks are available in different lengths as well. Rhino-Rack RTC-Style Roof Rack Tracks - 31-1/4" Long # RRRTC8JWMY11 Rhino-Rack RTC-Style Roof Rack Tracks - 31-1/2" Long # RTC8JW Rhino-Rack RTC-Style Roof Rack Tracks - 37-1/2"...
  view full answer...
• Can Rhino-Rack RTC Roof Rack Tracks be Cut to a Certain Length
  You could trim the Rhino-Rack roof rack tracks # RTC14 if you needed or wanted to. Just make sure that the cuts are perfectly straight up and down so the end caps will fit properly. Rhino-Rack does offer the tracks in other lengths. The shortest set is # RTC8JW at 31-1/2 inches long. If you need a specific size I can check to see if we have an exact match. The tracks are compatible with Rhino-Rack RLTP legs # RLTP, RLCP legs, # RLT500, and RLTF legs, # RLTF.
  view full answer...
• Attaching Rhino-Rack RTC-Style Roof Rack Tracks To Bed Rail Of 2019 Tacoma With A 5 Foot Bed
  The Rhino-Rack RTC-Style Roof Rack Tracks # RTC16 are meant to be mounted on the roof of a camper shell, but I see no reason why you couldn't mount them to the bed rails of your 2019 Toyota Tacoma. The only problem I see is that you have a 5 ft bed and the rails are 63 inches long. You will have to trim these tracks to match the length of your bed. In regards of the installation. It will come with all the hardware you need to install correctly. The only other part of the system that you...
  view full answer...
• Are Rhino-Rack Adapters or Spacers Required for RLTP Legs to Bolt Onto a Pioneer Platform?
  I reached out to my contact at Rhino-Rack and there are no adapters or spacers required to use the Rhino-Rack Track Mount RLTP Legs for Factory Roof Rack Tracks - 2" Tall - Qty 2 # RLTPMV with the Pioneer platform. They said instead you may want to use a pioneer platform like # RR35TB and legs # RLTP (x2) which would work well with the roof tracks.
  view full answer...
  
• Fitting Larger Rhino Rack Pioneer Platform to Leer Topper with Thule Tracks
  You could use the Rhino Rack Pioneer Platform # RR35TB which is 60 by 49 inch and then for feet that would attach it to your Thule roof rack tracks all you'd need is two sets of the Rhino Rack RLTP Legs part # RLTP and you'd be set.
  view full answer...
• Can Rhino Rack Pioneer Platform Fit on Top of Truck Bed Camper
  There are several different ways to install a Rhino-Rack Pioneer Platform Rack on the roof of your truck bed topper. I recommend using the track system as this will work the best for your application. In order to install the Rhino-Rack Pioneer Platform Rack part # RR75TB you will also need to install a set of tracks such as the Rhino-Rack RTC-Style Roof Rack Tracks part # RTC14 and then legs # RLTP (x2). The tracks once installed will give you a very versatile mounting system on the roof...
  view full answer...
• Recommended Heavy Duty Roof Rack for 2016 Ford F-150
  I may have a solution for you, however I don't recommend trimming the Rhino-Rack RT-Style Roof Rack Tracks like the 58 Inch # RRRTV148 that you referenced. These strips do feature pre-cut holes for the rivets so trimming any portion of the units will essentially change the way they are meant to attach. You would also need to make sure that the cuts are perfectly straight up and down so the end caps will fit properly. We do have shorter lengths available, such as the 36-1/4 inch # RRRTS540,...
  view full answer...
• Rhino-Rack Pioneer Platform Cargo Carrier For Rails On Truck Topper
  The Quick Mount Leg Spacers for Rhino-Rack Pioneer Platforms - Qty 4 # RRQMPS10-4 are designed to be used with the Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars - RTC and RT Roof Rack Tracks - Qty 4 # RRRLT600. You can then add a pioneer platform like # RR42115BF. If you want to forgo the pieces, the Rhino-Rack Pioneer Platform Rack - Track Mount - 60" Long x 49" Wide # RR35TB along with # RLTP (x 2) to mount the platform directly to the track rails. If your truck topper doesn't...
  view full answer...
• Parts Needed to Mount a Rhino Rack Pioneer Platform to a Truck Topper
  I have a solution for you, but there are not brackets to mount the Rhino Rack Pioneer platforms directly to your truck topper. I recommend adding a track system to the roof of your topper. You will use the Rhino-Rack RTC-Style Roof Rack Tracks # RTC14 to provide the tracks and then use the Track Mount RLTP Legs for Rhino-Rack RTC- and RT-Style Roof Rack Tracks # RLTP (x2) to mount the platform to the tracks.
  view full answer...
• How to Use the Rhino-Rack Pioneer Platform Rack on the Roof of a Truck Bed Topper
  There are several different ways to install a Rhino-Rack Pioneer Platform Rack on the roof of your truck bed topper. I recommend using the track system as this will work the best for your application. In order to install the Rhino-Rack Pioneer Platform Rack part # RR35TB you will also need to install a set of tracks such as the Rhino-Rack RTC-Style Roof Rack Tracks part # RTC14 and then legs # RLTP (x2). The tracks once installed will give you a very versatile mounting system on the roof...
  view full answer...
• Rhino Rack Roof Rack System for 1992 Chevy Suburban with Naked Roof
  Part # RRRTV208 works for your application. You need part # RLTP and part # RRVA137S-2. This is a universal roof rack system and most people don't like drilling into the roof. Personally I would go with part # 298-SX6000B for your Suburban. This is a universal system and can be used on other vehicles you might have.
  view full answer...
• Are the Rhino-Rack Track Mount RLTP Legs Compatible with Yakima Tracks
  We had the Rhino-Rack Track Mount RLTP Legs, # RLTP, and the Yakima tracks in stock so I pulled them from our warehouse and made a short video for you. I do have a solution for you, however the Rhino-Rack feet are not compatible with the Yakima tracks. Instead, I recommend using the Rhino-Rack RTC Tracks, # RTC14. These tracks are 55 inches long and are compatible with the RLTP legs. They are also more economically priced over the Yakima tracks which will save you some money. I have...
  view full answer...
• Will Thule AeroBlade Crossbars Fit Rhino-Rack RLTP Legs for a Range Rover Sport
  The Thule AeroBlade crossbars will not fit the Rhino-Rack RLTP legs, # RLTP. These legs are designed for Rhino-Rack heavy duty square bars. Also, different vehicles take different length bars so there is no guarantee that the length of the AeroBlade bars is sufficient for the Range Rover Sport. If you could tell me the year of your Range Rover Sport I could determine the length of the bars you would need and then you could get the appropriate Rhino-Rack feet and bars.
  view full answer...
• Can I Install Heavy Duty Rhino-Rack Crossbars on a Pop Up Camper Roof
  To be able to mount the Rhino-Rack Heavy-Duty Roof Rack Crossbars, part # RRRB2000S-2, you can use the Rhino-Rack RT-Style Roof Rack Tracks, part # RRRTV128, along with some legs for the crossbars to mount on. The Roof Rack Tracks will allow you to move the legs back and forth along the roof to accommodate what you are needing to carry. If the 50 inch track is too long or short for you I am including a link to our product page that has all of the tracks on it. The 2 leg options that we...
  view full answer...
• Correct Rhino Rack RTC Style Track System For A 2016 Chevrolet Silverado 1500
  If you're wanting to put these tracks # RTC16 on your 2016 Chevrolet Silverado, you can get these legs # RLTP that will fit into the tracks. These will work with the Rhino Rack Heavy Duty Crossbars # RB1650B-2.
  view full answer...
• Aero-Style Roof Rack Options for a 2011 Land Rover Range Rover Sport
  The Rhino-Rack Roof Rack for Factory Tracks # Y02-490B-NT is designed to mount on tracks that sit on the roof like you see in the attached picture. Please note that if you have the factory tracks on your 2011 Land Rover Range Rover Sport the only confirmed fit from Rhino-Rack is the Rhino-Rack RSP Roof Rack # RSPT508. If you don't have the roof rails then you can either use parts # RRVA137B-2, # RLTP, # RTS508, and # RRVA-FK1-2 to add the roof rails and the same type of roof rack that...
  view full answer...
  
• Will the Rhino-Rack RTC-Style Roof Rack Tracks # RTC95JW Fit a 1998 Jeep Wrangler with Hardtop
  The 37-1/2" long Rhino-Rack RTC-Style Roof Rack Tracks # RTC95JW are a universal fit so as long as your 1998 Jeep Wrangler Sahara has a naked roof that is flat then they will fit. The tracks provide mounting points for the Rhino-Rack # RLTP, # RLTF, and # RLT500 track-mounted legs. These are compatible with the Heavy-Duty Rhino-Rack Bars like the 50" long # RB1250.
  view full answer...

Do you have a question about this Roof Rack?