See what our Experts say about this Yakima Roof Rack

• Recommended Roof Rack and Kayak Carrier for a 2003 Toyota RAV4
  Lucky for you, Yakima does make a set of crossbars that are designed to work with vehicle's that have a bare roof like your RAV4. Check out the Yakima BaseLine FX Roof Rack for Naked Roofs # Y59UV with the BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y06185. These crossbars measure 44 3/4" long, has a 165 lb dynamic weight capacity, and has an integrated top channel for roof mounted accessories. Since you also are looking for a way to transport some kayaks, I'd recommend checking...
  view full answer...
• Can the Yakima BaseLine Crossbars Handle the Weight Capacity of a Roof Top Tent
  The weight capacities listed on cross bars like the Yakima BaseLine FX Roof Rack for Naked Roofs # Y59UV are the dynamic capacity, meaning while the vehicle is in motion. When you're parked and using your tent, the weight capacity is easily going to double or triple because the weight will be static over the axles. So with that being said, the BaseLine crossbars will easily be able to handle the weight of the two adults and the roof top tent. It's also worth mentioning that most, if...
  view full answer...
• 2023 GMC Acadia Roof Rack and Cargo Box Recommendations
  The absolute best roof rack for your 2023 GMC Acadia with the bare roof is the Yakima BaseLine FX because it has a nice factory look but is also more robust so you get a great looking system that's also stronger. Here are the parts you'll need: - BaseLine FX Crossbars # Y59UV - Fit Kits # Y06138 and # Y06132 - Lock Core Kit # Y07204 (optional) If you were planning on using this for a cargo box then I highly recommend the Yakima SkyBox NX 18 # Y45AV. I really like this box because it...
  view full answer...
• Recommended Roof Rack for a 2024 Volvo S90 w/ No Rails
  To add a roof rack to your 2024 Volvo S90, that does not overhang the side of your roof, you will need the following parts: Yakima BaseLine FX Roof Rack for Naked Roofs - Aero Crossbars - Aluminum - Black - Qty 2 item # Y59UV BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 4 item # Y06124 This aero bar roof rack system has a 165 lbs capacity. I recommend adding the Yakima Same Key System item # Y07204 to prevent theft.
  view full answer...
• Length/Width of Yakima BaseLine FX Roof Rack Crossbars For 2019 Hyundai Santa Fe w/ Bare Roof
  Hi John; great choice going with the Yakima roof rack for your 2019 Hyundai Santa Fe with a bare roof, and the crossbars themselves are 2-3/4" wide x 1-1/8" tall for the Yakima BaseLine FX Roof Rack # Y59UV. That should allow you to clamp any accessory on them as they are standard size crossbars. To complete the set up for your' 19 Santa Fe you'll also need the BaseClip Fit Kit # Y06151 and # Y06154.
  view full answer...
• Will Yakima BaseLine FX Roof Rack Hold Hobie Outback on 2022 Nissan Altima
  Hi John; the Yakima BaseLine FX Roof Rack # Y59UV has a capacity of 165 lbs. It can definitely handle the weight of your Hobie Outback and will allow the use of a kayak carrier like the Malone MegaWing # MPG207. Make sure you double check the capacity of the roof on your Altima as well to make sure it is high enough to handle the kayak.
  view full answer...
• Roof Rack for Carrying a Canoe/Kayak on a 2014 Subaru Impreza with a Naked Roof
  While we do have roof racks for your 2014 Subaru Impreza, the (discontinued) Custom Fit Kit WB-K473 you referenced is for various years and models of GM pickups and there isn't a Whispbar roof rack currently in production that fits your vehicle. If you like the higher quality of a Whispbar product then you'll want to go with a Yakima roof rack as they actually manufacture the Whispbar brand. From what you were looking at I'm guessing you have a Sedan that isn't the WRX. For this you'll...
  view full answer...
• What Kayak Load Assist Can I Use With My Lockrack For My 2016 Subaru WRX
  I do have a solution for you, but will not involve the Lockrack Loading Bar. You will still have to remove, or adjust the orientation, of the arms for this solution to work, but this method would be your only option. You can use the following items to help you load your kayak with the Lockrack Loading Bar. The Rhino-Rack Universal Load Assist - Crossbar Mount - Side Loading - 132 lbs, part # RR-RUSL. This load assist bar clamps to your roof top rack and it has a weight limit of 132 lbs....
  view full answer...
  
• Yakima Roof Bike Rack Recommendation for 16 Kids Bike Wheels on a 2018 Subaru WRX Sedan
  As far as Yakima racks that work with 16" and 20" wheels, the best and only option is the fork-mounted Yakima HighSpeed # Y02115. With this rack, I confirmed with Yakima that it does not require a minimum or maximum wheel diameter as long as the bike's tires do not exceed 5" wide and the bike's wheelbase does not exceed 48". As far as compatibility with the kid's bike, it is compatible with 9 mm x 100 mm, 12 mm x 100 mm, 15 mm x 100 mm, 15 mm x 110 mm, 15 mm x 135 mm, 15 mm x 142 mm, 15...
  view full answer...
• Roof Rack Fit for 2015 Hyundai Sonata with Glass Panoramic Sunroof
  The roof rack I recommend for you is the Yakima Roof Rack with JetStream Crossbars # Y00426, BaseLine Towers # Y28TR, BaseClip Fit Kit # Y06137, and BaseClip Fit Kit # Y06127. I confirmed with my contact at Yakima that they do not have any fit restrictions for the glass panoramic sunroof on your 2015 Hyundai Sonata and so this roof rack will work well for you. I have attached a photo showing where this rack mounts on the Sonata.
  view full answer...
  
• Will the Yakima Sidewinder Bike Rack Fit on Elliptical Style Crossbars on a 2013 Nissan Altima
  The Rhino-Rack Roof Rack with the Vortex Aero Crossbars, # RRVA126B-2, 2500 Series Leg Kit, # RRRLKVA, and the Custom DK Clamps and Pads, # DK381, will fit a 2013 Nissan Altima, however the Yakima Sidewinder Tandem Bike Rack is only compatible with round crossbars. According to my contact at Yakima, Yakima does not offer an adapter that will allow the Sidewinder bike rack to be used with elliptical style crossbars because the weight of the bike rack and a tandem bike would be too great...
  view full answer...
• Roof Rack Recommendation for 2015 Hyundai Sonata with Panoramic Roof
  Yakima has roof racks for your 2015 Hyundai Sonata Limted that include the panoramic roofs like what you have. So for that you could use the Jetstream Crossbar kit # Y00426, # Y28TR, # Y06137, and # Y06127 and you'd be set.
  view full answer...
• Roof Rack And Cargo Carrier Recommendation For 2014 Nissan Altima 4-Door
  The Yakima Roof Rack System Is a good fit for your 2014 Nissan Altima 4 door. The weight capacity for the roof rack is 100 lbs. That would include the weight of any cargo box you choose added to the weight of any cargo you place in the carrier. The front crossbar is placed 15-1/8 inches from the windshield. The crossbar spread is 24 inches. You need the following parts for the roof rack: 48 inch RoundBars # Y00408 BaseLine Towers # Y28TR RoundBar Adapter # Y03536 BaseClips # Y06137 and...
  view full answer...
• Carrying Bikes on a 2017 Hyundai Sonata Hybrid Limited
  The best bike rack is the one that's best for you. A lot of which is determined by how many and what kind of bikes you're going to be carrying. As well as how often you're going to be hauling the bikes. Overall, in my opinion, a hitch mount bike rack is the best way to go; however if you need to carry more than two bikes it isn't going to work for you because the only hitches that are designed for your 2018 Hyundai Sonata Hybrid are Class I receivers which are only able to carry up to...
  view full answer...
• Recommended Roof Rack for a 2015 Hyundai Sonata with Panoramic Roof
  The roof rack that I recommend using on your 2015 Hyundai Sonata with the panoramic roof is the Yakima JetStream roof rack. This consists of the 60" JetStream Bars # Y00426, along with the BaseLine Towers # Y28TR, and the BaseClip Fit Kits # Y06137 and # Y06127. If you would like to add locks to this then you also need part # Y07204. I spoke with my contact at Yakima and he said that right at where the roof rack bars sit you will have about 4" - 4-1/2" and then in the middle of the roof...
  view full answer...
  
• Parts Needed to Install Yakima Round Bar Roof Rack on 2015 Nissan Altima
  We have parts to fit your Yakima round bars on your 2015 Nissan Altima, but not with the Q Towers as they were discontinued. According to Yakima you'll need the bars that you have already like part # Y00408. BaseLine Towers # Y28TR RoundBar SL Adapter # Y03536 BaseClip Fit Kit # Y06137 BaseClip Fit Kit # Y06127
  view full answer...
• Roof Rack and Cargo Carrier Options for 2013 Nissan Altima 4-Door Sedan with Moon Roof
  We offer many roof rack options for your 2013 Nissan Altima 4-Door Sedan with moon roof; and we also offer a range of rooftop cargo products, some of which can be mounted to a roof rack and others which require only roof side rails. Since your Altima has a moon roof it is indeed a good idea to install a roof rack to support the cargo carrier, but if your cargo needs do not require a high weight capacity, and if your Altima owner's manual does not prohibit fabric bags like the Yakima being...
  view full answer...
• Recommended Yakima Roof Rack That Will Fit 2012 Infiniti G37 And 2016 Nissan Altima
  To install a Yakima roof rack on your 2012 Infiniti G37 and your 2016 Nissan Altima, you will be able to use the same crossbars and towers. The only different parts you will need will be the fit kits for each vehicle. I recommend purchasing the roof rack for the 2016 Altima. You would need part # Y00425, part # Y28TR, part # Y06137, and part # Y06127. Then for the Infiniti you will only need to get part # Y06109. You can use the crossbars and towers from the Altima kit mentioned above.
  view full answer...
• Roof Rack Fit on 2014 Hyundai Veloster
  I checked with the roof rack manufacturers and was able to find a roof rack that is a confirmed fit for your 2014 Hyundai Veloster, which is from Yakima and consists of the following parts: - Yakima JetStream Crossbars Black # Y00425 - BaseLine Towers for Yakima Crossbars # Y28TR - BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y06180 - BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y06127 This roof rack has aerodynamic bars which are low profile, giving the rack a...
  view full answer...
• Recommended Roof Rack For My 2015 Chevrolet Cruze
  I do have a roof rack that will fit your 2015 Chevrolet Cruze, but your Malone roof rack will not fit your vehicle. My roof rack recommendation will consist of the following: Yakima CoreBar Crossbars - Steel - Black - 50" Long - Qty 2, part # Y00421 BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4, part # Y28TR BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2, part # Y06137 BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2, part # Y06127 Yakima Same Key...
  view full answer...
• Roof Rack with Yakima SweetRoll Kayak Saddles on 2016 Nissan Altima
  The Yakima SweetRoll Kayak Carrier # Y04074 will fit onto the SportRack Roof Rack # SR1010. The SportRack will fit on your 2016 Nissan Altima however it's a semi-custom fit so it's not designed specifically to fit the roof of your car. For a custom fit I suggest the Yakima Roof Rack: 48 inch Round CrossBars # Y00408 BaseLine Towers # Y28TR RoundBar Adapter # Y03536 BaseClip Fit Kits # Y06137 and # Y06127
  view full answer...
• Yakima Feet and Fit Kit for 2013 Altima
  Hey Terry, for the complete Baseline roof rack part # Y33CB that fits your 2013 Nissan Altima we do have replacement feet for it with the part # Y28TR. The fit kits are part # Y06127 and # Y06137 What specific rack do you have now? Are they round bars by chance?
  view full answer...
• What Kayak Carrier do You Recommend for My 85-Pound Kayak on My 2016 Hyundai Sonata?
  I have a great solution for you. While the Thule Hullavator # TH898 can be used with a crossbar system that uses clips on your 2016 Hyundai Sonata without a panoramic roof, it has a weight capacity of 75 pounds. Unfortunately, this is not enough weight capacity for our 85-pound kayak. We also do not carry a load-assist option that has enough weight capacity for your kayak. In addition, With that being said, the best option is to use the Yakima BigCatch Kayak Carrier w/ Tie-Downs - Saddle...
  view full answer...
• Recommendations For Carrying 4 Bikes On 2012 Hyundai Veloster
  With a Class l hitch on your 2012 Hyundai Veloster, you are limited with the tongue weight capacity and any bike carrier you install in the hitch limits you to 2 bikes. You will want to check your owner's manual or with your dealership to make certain you do not exceed the vehicle's tongue weight capacity. The Saris Freedom 4 Bike Platform Rack, part # SA4414B, is rated to be used with higher rated hitches and would not be a fit for your Veloster. You will want to make sure any accessory...
  view full answer...
• Installation of Yakima Roof Rack on 2013 Nissan Altima
  Installing the Yakima JetStream roof rack on your 2013 4-door Nissan Altima does not require the weather to be a certain temperature and there should be no interference with your door putting the rack on. The accompanying photo shows how the clamps will look when installed properly and your door should shut completely. This rack is made up of: - Yakima JetStream Crossbars # Y00425 - BaseLine Towers for Yakima Crossbars # Y28TR - BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers #...
  view full answer...
  
• Roof Rack and Kayak Carrier for 2014 Chevy Cruze
  The SportRack light-duty roof rack # SR1010 is a confirmed fit on your 2014 Chevy Cruze and it will be compatible with almost any roof-rack-mount kayak carrier since it uses square bars. But do please note that this rack has the lowest weight rating of all racks made for your car (90-lbs), so while it is a nice value it may not be the best choice for transporting a kayak. If, for instance, you are planning to take just one 40 or 50-lb kayak only a short distance on local roads, not on...
  view full answer...
• Parts Needed to Install Yakima Jetstream Roof Rack on 2016 Hyundai Veloster
  Yakima would be the final authority on the correct components to install one of their roof racks on your 2016 Hyundai Veloster. I checked with them just now and the correct Base Clips would be the part # Y06127 and # Y06180. The other components you'd need would be the Yakima JetStream crossbars part # Y00425 and Baseline Towers part # Y28TR.
  view full answer...
• Parts for Yakima JetStream Roof Rack on 2017 Land Rover Discovery Sport and How Many Bikes Will Fit
  To install the 50" Yakima JetStream crossbars # Y00425 on your 2017 Land Rover Discovery Sport you'll also need the BaseLine Towers # Y28TR as well as fit kits # Y06127 and # Y06154. When it comes to bike capacity there are a few factors that come into play, but if your bikes are lightweight then you can potentially fit 5 or 6 bikes on 50" crossbars. The factors that you need to take note of are the weight of your bikes, the width of the bike racks you plan on using, and the geometry of...
  view full answer...
• Roof Rack Recommendation for 2018 Nissan Altima with Sunroof
  For your 2018 Nissan Altima with a sunroof the Yakima roof rack part numbers # Y00421, # Y28TR, # Y06137, and # Y06127 is a confirmed fit and would work great. The only tech tip that Yakima states is that when open, the sunroof may interfere with some accessories. The aero shape of these crossbars will give you a very quiet ride and minimize fuel mileage loss.
  view full answer...
• Parts Needed to Install Yakima Roof Rack on 2017 Nissan Altima
  Yakima recently made some changes to their round bar roof racks but you can still install a round bar rack on your 2017 Nissan Altima but you will need new feet and fit kit. For that the # Y00408 if you needed new bars, # Y28TR for feet, # Y03536 for bar adapters, and fit kits # Y06137 and # Y06127 and you'd have everything you'd need.
  view full answer...
• How Can I Tell if I have Fixed Mounting Points on My 2015 Mazda CX-5 for a Crossbar System?
  According to the specs I have, you may have fixed mounting points on those rubber strips on your 2015 Mazda CX-5. The way you can tell is if there is a small removable tab on those rails that cover the holes. I went ahead and attached a video of a 2015 Mazda CX-5 with fixed mounting points to give you perspective about what to look for. If you determine that you have fixed mounting points, I recommend the following setup: - Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 46" #...
  view full answer...
• Ski Rack and Roof Rack Recommendations for a 2018 Subaru Legacy
  How you transport is really up to you. Your 2018 Subaru Legacy is still extremely new, so fits are being added all the time, and Subarus have a reputation for being incredibly flexible. If you want to go with the full rack, or have other possible items to carry like bikes, kayaks or cargo, I recommend using a Yakima roof rack system. This has the added benefit of letting you use a wide variety of accessories and adds a more rough and tumble look to the car. To add this kit to your vehicle,...
  view full answer...
• Yakima Jetstream Roof Rack for Use with Thule Hullavator TH898 on 2018 Toyota Highlander
  The Thule Hullavator load-assisted kayak carrier # TH898 will directly mount onto just about any roof rack bar shapes, including round, square, aero, elliptical, most factory crossbars, and most crossbars with top "T-slot" channels. Yakima Jetstream bars will work fine so long as they are long enough. The most important compatibility requirements for mounting the Hullavator are that the cross bars extend out past the rack legs and by no less than 4 -inches and that they be at least 24-inches...
  view full answer...
  
• Recommended Kayak Carrier for 2020 Mazda CX-5
  The only hitch mounted option wouldn't be an actual carrier, but a support like the Malone Axis # MAL32VR. This would require the installation of a trailer hitch like the # 76138 you looked at. More than likely you won't need this to mount your kayaks on your 2020 Mazda CX-5. Your kayaks will fit completely on a roof rack with a kayak carrier like the one seen in the picture below unless they are incredibly long. If that is the case, then by all means you could add the # MAL32VR to help...
  view full answer...
  
• Recommended Roof Rack For A 2021 Kia Seltos With A Naked Roof
  Yes there is, so for your 2021 Kia Seltos I recommend taking a look at the: -Yakima JetStream Crossbars # Y00425, with the BaseLine Towers for Yakima Crossbars # Y28TR, and the BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y06130 & # Y06132. The great part about this rack, apart from the 165-lbs weight capacity, is that it will also work great with naked roofs like what's on your 2021 Kia Seltos by using the DropHook clip holder. I have also included an installation video on...
  view full answer...
• Recommended Roof Rack for a 2023 Mazda CX-5 to Use the Thule Hullavator Pro Kayak Carrier
  In order to use the Thule Hullavator Pro # TH898 on your 2023 Mazda CX-5 you will need to have a roof rack with crossbars that extend 4"-8" past the roof rack feet. If you have a roof that has no existing crossbars or rails, I recommend the 2023 Mazda CX-5 Roof Rack by Yakima which consist of the: - Yakima HD Crossbars # Y01156 - BaseLine Towers for Yakima Crossbars # Y28TR - HD Bar SL Adapter # Y03541 - BaseClip Fit Kit # Y06130 - BaseClip Fit Kit # Y06154 If you have flush mounted...
  view full answer...
• Comparing Yakima Baseline and Skyline Towers on 2015 Mazda CX-5
  When comparing the height of each option, the lowest Yakima Roof Rack for your vehicle consists of the Yakima RoundBar SL Adapter # Y03536 to utilize your previous Yakima round bars, the BaseLine Towers # Y28TR, the BaseClip Fit Kit # Y06130 and # Y06132. Overall this system will be about an inch shorter than the Skyline tower and base option.
  view full answer...
• Will the Yakima SteelHead Roof Mounted Bike Carrier Fit Aero Crossbars on a 2017 Toyota Highlander
  In order to use the Yakima SteelHead Roof Mounted Bike Carrier on your 2017 Toyota Highlander you would need to install a round bar system like the Yakima Roof Rack System part # Y00408, part # Y53TR, part # Y03536, and part # Y00242 if you have flush side rails or the Yakima Roof Rack System part # Y00409, part # Y28TR, part # Y03536, and part # Y06130 if you have a bare roof. If you want to keep the roof rack you have now then I recommend selling the SteelHead and buying the Yakima...
  view full answer...
• Base Clips For Yakima Roof Rack Towers On A 2018 Toyota Corolla
  It looks like all of the Yakima roof racks that are confirmed to fit your 2018 Toyota Corolla use BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y06130 and BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y06170. To confirm, you can give me more information about your roof rack that you have and I will make sure this is the correct clip set. I have attached a demonstration video to show you how these clips install.
  view full answer...
• Will the Malone DownLoader Fit on Yakima Roof Rack Crossbars
  Yes, the Malone DownLoader # MPG114MD-351XL is designed to fit on virtually all available aftermarket crossbar shapes and most factory bars, so this would work well with a Yakima roof rack like the one for a 2016 Avalon that uses parts # Y00425, # Y28TR, # Y06130, # Y06131. The DownLoader is an awesome solution to help make loading and unloading your kayak a breeze, and the system comes with cam buckle load straps to help you secure the boat. I've linked some review videos of these parts...
  view full answer...
• Yakima Roof Rack Landing Pad 16 Wont Line Up On 2019 Toyota Highlander
  There are two roof configurations on a 2019 Toyota Highlander, bare roof and flush side rails. The Landing Pad 16 part # Y00242 is designed for models with flush side rails. If you have a bare roof you need to use the BaseClip Fit Kit part # Y06130. I think you might be looking at the pre-drilled holes in the roof used to attach the flush side rails from the factory and if so these can't be used and you would have to use the rack for bare roof models. I have attached a video below of the...
  view full answer...
• Best Roof Rack and Kayak Carrier for a 2019 Hyundai Tuscon w/ Bare Roof
  I would be happy to help you set your 2019 Hyundai Tucson up to transport your kayaks. You are going to need a roof rack but lets start with the kayak carrier. I recommend the Thule Compass Kayak and SUP Carrier w/ Tie-Downs - J-Style, Post Style, or Saddle - 2 Kayaks or SUPs item # TH890000. The Compass allows you to transport two kayaks on your roof rack crossbars. You will be able to carry in the stacker, J-style, or saddle position to maximize usable space on your crossbars. This carrier...
  view full answer...
  
• Recommended Roof Rack System For 2015 Mazda 3 For a Roof Top Tent
  I would be happy to recommend a roof rack for your 2014 Mazda 3 5 Door Hatchback for carrying a 165lb Roofnest Rooftop Tent. If your Mazda 3 has fixed mounting points on the roof I recommend the Yakima Roof Rack System which uses 50" Yakima JetStream Crossbars # Y00425, SkyLine Towers for Yakima Crossbars # Y53TR, and Landing Pads # Y00248. If your Mazda 3 does NOT have fixed mounting points then I recommend the Yakima Roof Rack System which uses 60" Yakima JetStream Crossbars - Aluminum...
  view full answer...
• Roof Rack Recommendation to Carry Thule Pulse Box on 2018 Toyota Highlander
  In order to carry the Thule Pulse Large Rooftop Cargo Box # TH615 on your 2018 Toyota Highlander you will need crossbars that are perpendicular to your vehicle body so that the box can be parallel with the vehicle body. I really like the Yakima JetStream roof rack system because the crossbars are higher quality with that aero-style design and the legs have adjustments so you get the best fit possible. I'm guessing you have a naked roof but in the event that you do have the flush mount rails...
  view full answer...
• Yakima Roof Rack Components Recommendation to Fit 2019 Mazda CX 5
  The Yakima Landing Pad 19 # Y00245 that you referenced has been confirmed by Yakima to fit the Skyline and Control Towers like you mentioned. Glad it worked for you as well! For the 2019 Mazda CX-5 Yakima recommends the BaseClip part # Y06130 and part # Y06154 when used with JetStream bars # Y00425 and BaseLine Towers part # Y28TR.
  view full answer...
• Rear Yakima Roof Rack Bar Sits Higher than Front Bar on a 2016 Toyota Avalon
  You will want the Yakima roof rack on your 2016 Toyota Avalon as level as possible, but due to the different strength points on a roof and the differing heights of the towers it isn't uncommon for crossbars to be a little out of level with each other. They shouldn't be so far out of level that is causes issues with accessories fitting though, which is the main concern. With all of that being said, it is always a good idea to double check your installation just to make sure you have everything...
  view full answer...
• Can Yakima SkyRise Tent be Used with 2018 Mazda CX-5 AWD
  The Yakima SkyRise Tent # Y07436 will work great on your 2018 Mazda CX-5 but you will need a roof rack with at least a 165 lb capacity. If the roof of your 2018 Mazda CX-5 has flush rails that run front to back you'd want the Yakima Jet Stream rack part numbers # Y00425, and # Y64AR, # Y39AR If you have a naked roof you'd want the part numbers # Y00425, # Y28TR, # Y06130, and # Y06154. If you have rails that run front to back that are raised up you'd want the Malone rack part # MPG215....
  view full answer...
• Recommended Roof Rack and Kayak Carriers for 2020 Mazda CX-5
  The JetStream Rack from Yakima I previously recommended will be easy to remove and won't require pulling that rubber piece out of the roof gully. Once you assembly the feet and crossbars all you have to do is sit it on the roof, attach the hooks and tighten them down. You only have to do the assembly once so putting the rack on and taking it off after is just a matter of positioning it correctly and installing the DropHook system again. You need the following for this rack: -Yakima JetStream...
  view full answer...
• Roof Rack Recommendation for 2016 Toyota Highlander LE Plus for Carrying Thule Hullavator
  What you will need to attach your Thule Hullavator # TH898 on your 2016 Toyota Highlander with a naked roof is roof rack. I can help you with that. Since Thule doesn't have any fits for your vehicle you will need to go with a Yakima Roof Rack as their crossbars are also compatible with the Hullavator. For that you will need the part numbers # Y00409, # Y28TR, # Y03536, and # Y06130.
  view full answer...
• Recommended Roof Rack For A 2019 Toyota Highlander To Carry A Thule Hullavator 898
  In order to use the Thule Hullavator Pro Kayak Carrier and Lift Assist with Tie-Downs - Side Loading, part # TH898, on the roof rack of your 2019 Toyota Highlander, the crossbars need to extend between 4" and 8" past the the towers/feet. My recommendation would be to go with a 60" crossbar for your roof rack. I have two roof rack recommendations for you. The first rack is for a Highlander with flush rails. It will consist of the following items: Yakima CoreBar Crossbars - Steel - Black...
  view full answer...
  
• Recommended Roof Rack to Use the Yakima SideWinder on a 2018 Toyota Highlander LTD
  I recommend installing a Yakima JetStream roof rack on your 2018 Toyota Highlander because they provide a clean looking installation that allows you to utilize the full 165 lb weight capacity and can be keyed alike with your SideWinder # Y02071. If you have a naked roof (no rails running from front to back) then you need the 60" JetStream Bars # Y00426 the BaseLine Towers # Y28TR, and the BaseClip # Y06130. For flush mount rails you would instead need the 50" JetStream Bars # Y00425,...
  view full answer...
• Need Replacement Pads for Yakima Baseclip 130.
  We do carry the BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers part # Y06130 this is the clip and the contact pad for the Yakima roof rack systems and will come with two 130 clips and the appropriate pads. I do not have them available seperately.
  view full answer...
• Roof Rack System Similar to the Yakima Whispbar for a 2017 Subaru Legacy
  I do have a similar roof rack system for your 2017 Subaru Legacy but the Yakima Whispbar Roof Rack System has since been discontinued in favor of the Yakima JetStream Roof Rack System. In order to mount the Yakima JetStream Roof Rack System to the roof of your vehicle you will want to use part # Y00426, part # Y28TR, part # Y06145, and part # Y06130. I have added a review video of this system for you as well.
  view full answer...
• Recommended Roof Crossbars and J-Style Kayak Carrier for a 2018 Toyota Corolla
  We have just what you need for your 2018 Toyota Corolla! I recommend checking out the Yakima JetStream Crossbars # Y00425 with the BaseLine Towers for Yakima Crossbars # Y28TR, & the BaseClip Fit Kit for Yakima BaseLine Roof Rack # Y06130 & # Y06170. These crossbars will easily attach to your Corolla's naked roof, has a 165-lbs weight capacity, and will allow you to use a set of J-Style kayak carriers like the Thule Compass Kayak Roof Rack w/ Tie-Downs # TH890000. Since you're interested...
  view full answer...

Do you have a question about this Roof Rack?