To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
When you’re loading up kayaks, cargo boxes, or camping gear, you want bars that can take the weight without flexing. These square crossbars are built from hardened steel and finished with an elastomeric coating that protects against corrosion. With a 220-lb weight capacity, they give you the strength and stability you need for long trips and heavy hauls.
A roof rack should stay put no matter how rough the road gets. This system installs to fixed mounting points for a solid, custom fit. Each bar locks into place under leg covers that help deter theft, so your setup stays secure whether you’re parked at a trailhead or driving cross-country.
From kayak carriers to cargo boxes, these square bars are ready for all kinds of clamp-on mounts. The classic shape makes it easy to attach the gear you already own, so you can switch between bikes one weekend and a canoe the next without extra adapters or hardware.
Rain, salt, and sun can take a toll on gear that lives on your roof. The elastomeric coating on these steel bars stands up to corrosion and keeps them looking sharp trip after trip. It’s a simple layer of protection that helps your rack handle every adventure year round.
Ratings & Reviews
Awesome
Install went without issues.
Good quality and fit perfectly for my 2006 CR-V.
Great item, works very well.
Seem to be good quality, and fit in the other parts properly.
Was very easy to install makes some wind noise but I knew that before I bought it.
Good fit, installation was easy.
Product was exactly as described and shipping was very fast with excellent communication!
Really pleased with the price and how fast my fit kit arrived. It was also super convenient that the detailed installation guide was available on this site because the ones that came in the box were too general.
The equipment is great! Be aware you do have to purchase the Inno case separately and there is no installation video which posed some difficulty but once installed it’s great and quick.
The product itself seems good, but I wouldn't know yet because I do not have all of the pieces needed to install. I wish it was made a little more clear in some form of guide exactly what is needed to be able to install on my vehicle. Not to mention I ended up having to pay shipping this time since it ended up being two separate orders.
these work great in the roof style of the 2007 forester. They DO NOT come with the parts needed to attach them from etrailer so read carefully to make sure they will work with your vehicle.
Sturdy metal roof rack bars. Able to hold several heavy ladders from job-to-job all year long.
I got these to replace my OE roof racks. The square shape is perfect for Yakima Bowdown kayak racks. Solid!
I had been looking a very long time for a roof rack for my 2014 Jeep Grand Cherokee. I wanted round or tubular crossbars, different from the “air foil” style, which were the only kind available from the factory and the many imitators. I finally found etrailer, and these fit the bill perfectly. The attachments fit the rails just like the factory model, and hold the rectangular cross bars firmly. A sturdy and solid product. And even with free shipping they arrived the morning of the second day after I ordered them, in time for the trip I was planning to take with them.
Excellent quality rack adapter. I have used Inno products for a number of years and they are just as good as Thule or Yakima and lower in price. I am using these feet with a square bar system I have had for years. Got a new vehicle with different rails and was please that there were adapters available from Inno.
I am more than pleased by the service that I had at etrailer. I was looking for a very old roof rack for my Subaru Legacy 2007 and etrailer had it. I was suspicius about it so I wrote them and got a quick and friendly answer that confirmed the fit and availability. Delivery was quick and the tracking from etrailer website was outstanding.
Pros: adjustability, price, sturdy construction, decent appearance.
Cons: square tubes = wind noise, must remove rubber ends to mount/dismount, be careful not to strip out the hex screws
Overall impression: A good, versatile occasional use rack if you don't want a clamp on.
This Inno rack is a sturdy, basic rack. What I like best about it:
- It actually mounts to the roof tracks on my 2015 Jeep Grand Cherokee (with the INTR132 fit kit), instead of to hard points on the roof like many other racks.
- It lets me use my Thule bars and accessories because Inno and Thule bars are the same size.
- It was much less expensive than the other racks I looked at.
- It is pretty easy to put on and take off.
What I don't like as much:
- The locking covers that go over the towers are pretty flimsy, and look like they are on crooked even when installed correctly
- This rack is quite noisy on the Grand Cherokee, but I think that's just the nature of the rectangular bars. (But since it is easy to take off, I plan on only putting it on the car when needed).
Also, thanks to the folks at etrailer for helping me figure out what would work best for my needs!
Had used Thule bars for years on multiple cars. Sadly found out Thule didn’t make a mount for my new Lexus GX. And I was about to throw in the towel, but found that the ”Inno” footing would work with my car and with my old Thule bars! They work great on my new car. Thank you etrailer for having the only website search engine that could recommend the parts I needed.
Cheers!
We bought this along with the INTR102 Custom Fit Kit. We used this to mount Thule crossbars and a Thule Adventurer cargo box on a 2001 Subaru Forester. Everything fit perfectly. The Inno mounts were completely compatible with the Thule crossbars. The fast and accurate shipping helped avert a crisis before a cross country trip.
Fit perfectly on our 2007 Subaru Legacy Wagon w/flush mount rails. We had our doubts but put our faith in C.S. Rep. He was right (of course)!! The fit on the stock rails perfectly. My husband didn't really have trouble installing them at all. We also got the Inno Fit Kit Hooks and the Inno Square Crossbars. Just came back from vacation. They were perfect for my husband's bike. (We did have Thule rails from an earlier bike rack. They fit into the Inno system w/o a problem. Thank You ETrailer for ALL your help. We couldn't have put it all together without you knowledge. Perfect!
Etrailer was extremely helpful and knowledgeable about the racks for my 2008 Subaru. Delivery was super fast! Racks are solid and mount perfect! I have no worries that they can do the task for which I purchased them. The only downside is that the locking covers are not as well made as the racks and do not fit properly on my application. Basically they don't sit flush where they should. Only I would probably notice. I also purchased the matching wind fairing which looks great. I'm happy with my purchase and would recommend Etrailer for good products and service.
I am more than pleased by the service that I had at etrailer. I was looking for a very old roof rack for my Subaru Legacy 2007 and etrailer had it. I was suspicius about it so I wrote them and got a quick and friendly answer that confirmed the fit and availability. Delivery was quick and the tracking from etrailer website was outstanding.
Do you have a question about this Roof Rack?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.