See what our Experts say about this Rhino Rack Roof Rack

• Will the Heavy Duty Rhino-Rack Roof Rack Fit a 2015 Nissan NV 3500?
  I have a great alternative for your crossbar setup. Unfortunately, the Rhino-Rack Roof Rack for Thule and Yakima Tracks # Y01-140B-NT is not confirmed to fit your 2015 Nissan NV 3500. However, we do carry a similar heavy duty bar setup by Rhino-Rack that does fit your 2015 Nissan NV 3500. For this setup, I recommend the following parts: - Rhino-Rack Heavy-Duty Roof Rack Crossbars # RB1375B-2 - Rhino-Rack 2500 Series Legs for Heavy-Duty Crossbars # RRRLKHD - Custom DK Fit Kit for 4 Rhino-Rack...
  view full answer...
  
• Rhino Rack Tower and Crossbar Compatibility with Thule Factory Installed Tracks on Truck Cap
  Yes. The Thule tracks will accept the Rhino-Rack feet and crossbars. The kits like the Rhino-Rack Roof Rack for Factory Tracks - 2 Vortex Aero Crossbars - Black - 54" Long # Y02-480B-NT will work well, or you can piece together the parts you desire. The really nice aspect of Rhino-Rack towers is they come with the included locks and are great quality at a really good price point. To piece together your kit, you will use the Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars - RTC...
  view full answer...
  
• Mounting Options for Rhino-Rack Fishing Rod Carrier RR576F
  The Rhino-Rack Fishing Rod Carrier # RR576F offers multiple installation options. It can mount to a roof rack by clamping around the rack crossbars (round, square, aero, elliptical, and most factory crossbars) or it can be installed in the top channel of rack crossbars like # RRVA126B-2 and # RB1375B-2 using the included T-bolt hardware shown in the photo which slide into the top channel of such bars. Only if used in the heavy-duty Rhino-Rack bars is the Fit Kit # HD-FK1 needed. The standard...
  view full answer...
  
• What Tie Downs Can I Use With The Yakima LockNLoad # Y05044
  The Ladder Pegs for Rhino-Rack Heavy-Duty Crossbars - 3" Tall # RSLP will not fit in the tracks of the Yakima LockNLoad Platform Roof Tray # Y05044, but I have something similar that you can use with the LockNLoad. The Ladder Pegs are made to fit in the rhino rack heavy duty crossbars # RB1375B-2. You can use the Yakima Eye Bolts # Y01162 with the lock in load on your 2019 Jeep Grand Cherokee.
  view full answer...
• Rhino-Rack Roof Rack Recommendation for a 1989 Mitsubishi Montero with a Naked Roof
  You are correct, the Rhino-Rack Roof Rack Legs that you need for your 1989 Mitsubishi Montero are part # RL280S4. These are the gutter mount feet and they are 11 inches tall. For crossbars, you can use their Heavy-Duty Crossbars, # RB1375B-2 for black or # RB1375 for silver. I have attached the installation instructions for you to check out.
  view full answer...
  
• Rhino-Rack Heavy-Duty or Vortex Crossbars for 2019 Ford Transit Connect
  The primary difference between the Rhino-Rack Heavy-Duty Crossbars and the Rhino-Rack Vortex Aero Crossbars has to do with what they are designed to carry and what accessories work well with them. The Heavy-Duty Crossbars feature built-in C-channels that are made specifically for Rhino-Rack Heavy-Duty accessories like the Hi-Lift Jack Mounting Brackets # RJHB. Because the bars are larger than most other systems they will not be compatible with a lot of accessories that aren't specifically...
  view full answer...
  
• Affordable Way To Carry A Kayak On A 2010 Hyundai Sonata
  I have an affordable solution for you, however, the Rhino-Rack Heavy-Duty Roof Rack Crossbars - Black - 54" Long - Qty 2 # RB1375B-2 is not a fit for your 2010 Hyundai Sonata and even if it was, you would need to also buy a few other parts to fit it onto a vehicle so it would not be the price you were looking at. For your vehicle with a naked roof, the SportRack Semi-Custom Roof Rack 50" # SR1002 is going to be your best option. This square bar roof rack includes everything necessary...
  view full answer...
• Do Rhino Rack Vortex Crossbars Have an Upward Curvature?
  The Rhino-Rack Vortex Bars are slightly bowed in the longer bar options to help support the weight when applied to the center of the bar. Most manufacturers have this as a part of the aero bar design. If you want a more straight bar, then you will want to instead use the heavy duty bars like # Y01-120B-NT for the track system or # RB1375B-2 for just the crossbars. There are longer bars like # RB1500B-2 and # RB1650B-2 if desired.
  view full answer...
• Are There Rails Available For Installing a Roof Rack on a Vehicle
  We do have rails like the Rhino-Rack RTC-Style Roof Rack Tracks # RTC14 which mount to naked roof vehicles. They are typically used for camper shells or truck bed rails, but can be used on a vehicle if you are willing to drill into the roof. These rails will allow you to use Track Mount RLTF Legs # RLTF and Rhino-Rack Heavy-Duty square and Aero oval crossbars like the Rhino-Rack Heavy-Duty Roof Rack Crossbars # RB1375B-2 or the Rhino-Rack Vortex Aero Crossbars # RRVA126B-2. There are...
  view full answer...
• Weight Capacity and Comparison of Rhino Roof Racks for a 2011 Acura RDX
  I spoke with my contact for Rhino Rack and he said the weight capacity for all Rhino-Rack roof racks for your 2011 Acura RDX is 110 lbs. I think you were looking at the Rhino-Rack Heavy-Duty roof rack with the Heavy-Duty crossbars, # RB1375, the leg kit, # RRRLKHD, and Custom DK Clamps and Pads, # DK177. The Heavy-Duty crossbars will have a higher weight capacity, but once they are installed on a 2011 Acura RDX, the entire roof rack capacity drops to 110 lbs due to the limitations on the...
  view full answer...
• Tonneau Cover and Rack Options for 2007 Honda Ridgeline
  The tonneau cover manufacturers do offer some covers for other trucks that have the T-slots in the side rails that can be used tor installing a ladder rack like the Yakima OverHaul HD, but unfortunately they don't offer anything like this for your 2007 Honda Ridgeline. If the 165 lb capacity of a standard roof rack would work for you, your best bet would be to go with a tonneau cover like the BAK BAKFlip F1 you'd looked at, part # BAK72601 and use a roof rack on the vehicle. I'd recommend...
  view full answer...
• Roof Rack and Platform Recommendation for Roof of 2013 Toyota Highlander
  I have a solution for you, you'd want the Rhino Rack HD roof rack part # RB1375B-2, # RRRLKHD, and # DK138 which will allow you to use a Pioneer Platform Tray part # RR42112BF with the adapter part # RR43105. This has a lower capacity listed for what you are wanting to do but that's based on the application of it being used on the highway. For a situation like yours where the weight won't be bouncing around this would work well assuming your Highlander also has a similar weight capacity....
  view full answer...
• Are the Rhino-Rack Track Mount RLTP Legs Compatible with Yakima Tracks
  We had the Rhino-Rack Track Mount RLTP Legs, # RLTP, and the Yakima tracks in stock so I pulled them from our warehouse and made a short video for you. I do have a solution for you, however the Rhino-Rack feet are not compatible with the Yakima tracks. Instead, I recommend using the Rhino-Rack RTC Tracks, # RTC14. These tracks are 55 inches long and are compatible with the RLTP legs. They are also more economically priced over the Yakima tracks which will save you some money. I have...
  view full answer...
• Do I Have To Drill Afer Installing The Tracks On The Rhino Rack Roof Rack System # Y01-120-NT?
  The foot # RRRLKHD to crossbar # RB1375B-2 is adjustable along the bar with the kit you're looking at # Y01-120B-NT. The only drilling required is to install the tracks so if they are already installed no need to do any more drilling.
  view full answer...
  
• Roof Rack and Canoe Carrier Recommendation for a 2008 Chevy Silverado
  A Rhino Rack Roof Rack that includes the part # RRRLKHD would do an excellent job for carrying a 15 foot canoe on your 2008 Chevy Silverado. The rest of the parts needed to complete the roof rack would be the part # RB1375B-2 and # DK227. This is one of the strongest racks we offer so it would definitely take a lot of abuse. It would be great for carrying your canoe. For securing a canoe upside down on the crossbars I would recommend the Ratchet Grab part # RRRRG. I spoke to my contact...
  view full answer...
• Using a Rhino-Rack Roof Rack to Go Off-Road on a 2016 Chevrolet Colorado
  The Rhino-Rack ROC25 Vortex # RR93GR is an aerodynamic, low profile rack. I verified with Rhino-Rack that the bars are just as strong as the Rhino-Rack heavy-duty racks, however since the bars fit directly into the feet and do not have any over hang there is more weight being forced directly down onto the center of the bars and less weight being distributed across them. For a more rugged roof rack I suggest the 2500 Heavy-Duty Rack that consists of the 54 inch crossbars # RB1375B-2, the...
  view full answer...
• Roof Rack for 2009 Jeep Wrangler Unlimited With Aftermarket Hard Top to Transport 2 Kayaks
  The roof racks that we offer for the 2009 Jeep Wrangler Unlimited, such as the Rhino-Rack System consisting of parts # RB1375B-2, # RLT500 and # RTC95JW, are intended for use on the OEM hardtop. This system when mounted on the factory hardtop has a maximum cargo weight capacity of 65-lbs. This limit is not a function of the rack materials, but rather the capacity of the OEM roof, and therefore is the same for all other roof racks we offer for your Wrangler. Without knowing the brand and...
  view full answer...
• Recommended Rhino-Rack Crossbars that fit a 2017 Ford C-Max
  I believe the measurement you're looking at is referring to the HD Bars # RB1375B-2 which you don't have, however I can say with certainty that the Rhino-Rack ROC25 Roof Rack for Naked Roofs - Vortex Aero Crossbars # RR25SR will fit your 2017 Ford C-Max just fine. The front crossbars measure 43-9/16" long x 3-1/8" wide x 1-3/16" tall, and the rear crossbars measure 41-3/8" long x 3-1/8" wide x 1-3/16" tall.
  view full answer...
• What Parts do I Need with My Rhino-Rack 54" HD Crossbars to Fit on My 2012 Ford Edge with Bare Roof?
  According to my research of your Rhino-Rack part number 1375, I think you are most likely referring to the Rhino-Rack Heavy Duty Crossbars -54" Long # RB1375B-2 (black) or # RB1375 (silver) which are confirmed to fit a bare-roof 2012 Ford Edge. If this is what you have, you need the Rhino-Rack 2500 Series Legs # RRRLKHD and the Custom DK Fit Kit for 4 Rhino-Rack 2500 Series Roof Rack Legs - Naked Roof # DK228. With both of these components, you will have a full roof rack system on your...
  view full answer...
• Half Rhino-Rack HD Roof Rack for a 2015 Chevy Colorado Crew Cab with Naked Roof
  In order to get half of a Rhino-Rack roof rack for your 2015 Chevy Colorado we just have to piece together the parts. For a single bar you will need # RB1375B. For just 2 feet instead of 4 you will need # RRRLKHDH. And you will need custom clamp kit, # DK330, which is all 4 of the clamps and pads but they are not available individually so you would have to get the whole kit and just use 2 of them.
  view full answer...
• Roof Rack for 2014 Chevy Silverado 2500 that Could Have Tepui Tent Installed
  I looked up the Tepui Tents and they basically attach to roof rack crossbars like the Rhino Rack roof rack part numbers # RB1375B-2, # RRRLKHD, and # DK227 that you referenced. The only issue you may encounter is that this rack has a weight capacity of 130 lbs.
  view full answer...
• What Replacement End Caps do I Need for My Rhino-Rack Heavy Duty Crossbars?
  We definitely have them! The replacements you need for your Rhino-Rack Heavy Duty Crossbars like the # RB1375B-2 is the Replacement Endcap for Rhino-Rack Heavy-Duty Crossbars - Qty 1 # RRM002. It is important to note that each of these comes with a quantity of 1, so you will need to order 4 total.
  view full answer...
• Track Mount vs. Fixed Mount Rack For Tonneau Cover on 2021 Ford F-150
  Those are good questions, and you will indeed lose quite a bit of functionality going with a fixed rack system compared to a track mounted rack. The reason for that is simply that you'll have the ability to move the crossbars to accommodate whatever it is you need to carry, and depending on what that accessory may be, it won't be able to mount unless your crossbars have a specific spread distance. There is not a desired optimum spacing, that is completely up to you and what you are looking...
  view full answer...
• 2013 Pathfinder Naked Roof Roof Rack Recommendation
  For your 2013 Nissan Pathfinder the Sportrack Semi-Custom roof rack part # SR1002 has not been confirmed to fit your vehicle, BUT I do have a similar roof rack that would work for you. Instead you would want the Rhino Rack roof rack that consists of part numbers # RB1375B-2 and # CXB if you are looking for the most economical roof rack option around.
  view full answer...
• Weight Capacity and Bike Rack Options For 2018 Nissan Rogue
  In that question, the customer may have been referring to the towing capacity of their vehicle being a maximum tongue weight of 110lbs. That information can be found in your owners manual. So even if Draw-Tite Max-Frame Trailer Hitch Receiver # 75902 has a 3,500 pound towing capacity and 350 pound tongue weight capacity, the towing capacity of the vehicle takes precedent. So the lowest of the two numbers is what you go with in regards to towing capacity. So please check the towing capacity...
  view full answer...
• What Is The Load Bearing Capacity Of The RRRLKHD Legs And DK498 Fit Kit?
  Hello Larry, thanks for reaching out. The Rhino-Rack 2500 Series Legs # RRRLKHD have a 165 lb capacity. The # DK498 does not have a specific capacity assigned to it, meaning the capacity will be determined by the legs, so 165 lb capacity. As with any roof rack system, make sure you observe your vehicles maximum roof load capacity.
  view full answer...
• Will the Heavy Duty Rhino-Rack Roof Rack Fit a 2015 Nissan NV 3500?
  I have a great alternative for your crossbar setup. Unfortunately, the Rhino-Rack Roof Rack for Thule and Yakima Tracks # Y01-140B-NT is not confirmed to fit your 2015 Nissan NV 3500. However, we do carry a similar heavy duty bar setup by Rhino-Rack that does fit your 2015 Nissan NV 3500. For this setup, I recommend the following parts: - Rhino-Rack Heavy-Duty Roof Rack Crossbars # RB1375B-2 - Rhino-Rack 2500 Series Legs for Heavy-Duty Crossbars # RRRLKHD - Custom DK Fit Kit for 4 Rhino-Rack...
  view full answer...
  
• Are Feet and Fit Kit Available for Rhino Rack HD Rack RR28DP for Silverado
  Hey Jonathon, we do have just the replacement feet of the # RR28DP available with the part # RRRLKHD and the fit kit # DK427. I'd definitely brag to your wife how much money you saved just getting the feet and reusing your current bars haha.
  view full answer...
• Do Parts of Rhino Rack Roof Rack From 2012 Ford Escape Fit 2014 Ford F-150 SuperCrew Cab?
  I checked with Rhino Rack and the square bar roof racks that fit a 2012 Ford Escape and 2014 Ford F-150 do share the same # RRRLKHD 2500 Series legs which are for HD crossbars, so if that's what you have you would be able to use those legs on your F-150. If you have different legs there is NOT going to be a fit. Apart from that you are correct that you would need new crossbars and a new fit kit. The correct crossbars for the '14 F-150 would be the Rhino-Rack Heavy-Duty Roof Rack Crossbars...
  view full answer...
• Recommended No-Drill Roof Rack System To Attach A Rhino Rack Pioneer Platform On 2017 Ram 1500
  To attach the Rhino-Rack Pioneer Platform Roof Tray - Aluminum - 60" Long x 56" Wide # RR42113BF to your 2017 Ram 1500 Crew Cab without drilling you'll need to first install the Rhino-Rack Heavy-Duty Roof Rack Crossbars - Black - 59" Long - Qty 2 # RB1500B-2, Rhino-Rack 2500 Series Legs for Heavy-Duty Crossbars - Naked Roofs or Fixed Mounting Points - Qty 4 # RRRLKHD, and the Custom DK Fit Kit for 4 Rhino-Rack 2500 Series Roof Rack Legs - Naked Roof # DK043. This system will clamp onto...
  view full answer...
• Rhino-Rack Heavy-Duty or Vortex Crossbars for 2019 Ford Transit Connect
  The primary difference between the Rhino-Rack Heavy-Duty Crossbars and the Rhino-Rack Vortex Aero Crossbars has to do with what they are designed to carry and what accessories work well with them. The Heavy-Duty Crossbars feature built-in C-channels that are made specifically for Rhino-Rack Heavy-Duty accessories like the Hi-Lift Jack Mounting Brackets # RJHB. Because the bars are larger than most other systems they will not be compatible with a lot of accessories that aren't specifically...
  view full answer...
  
• Which Heavy Duty Crossbar Setup Should I Use On My 2015 Ford F-350 Super Duty?
  I am showing that the correct Rhino-Rack heavy duty crossbar setup for your 2015 Ford F-350 crew cab is Rhino-Rack Heavy-Duty Roof Rack Crossbars - Black - 59" Long # RB1500B-2. You will also need Leg Kit # RRRLKHD and Fit Kit # DK190 to install this onto your roof. This has a 165lb weigh capacity and is 59" long. You can install accessories by clamping onto the crossbars or by using the T-slot track. I have attached an installation video showing this roof rack being installed on a different...
  view full answer...
• Does Rhino-Rack HD Roof Rack for 2020 Toyota Corolla Sedan Have Static Load Rating
  I checked with Rhino-Rack and they specifically mention they only have dynamic (moving) load ratings, and that is exactly what the 165 lb capacity is with the rack that fits your 2020 Toyota Corolla sedan. Rooftop tents generally only call for a rack to have a certain dynamic capacity so I recommend checking out your tent's manual to find out. As for the roof rack for your 2020 Toyota Corolla, here are the parts you need: - Rhino-Rack Heavy-Duty Roof Rack Crossbars # # RB1250B-2 (Black)...
  view full answer...
  
• Roof Rack and 2-Kayak Carrier for 2016 Honda Accord Sport Sedan
  The Rhino-Rack ROC25 Series Heavy-Duty roof rack for your 2016 Honda Accord Sport Sedan that is made of parts # RB1375, # RRRLKHD and # DK359 is indeed a confirmed fit for your car. But note that this rack's unusual bar profile means reduced compatibility of accessory items like kayak carriers. You will have fewer kayak carrier choices with this rack. Instead I suggest their Vortex Aero rack # RR32SR which features quieter aerodynamic crossbars that will generate much less wind noise than...
  view full answer...
• Can I Carry Two Kayaks Side by Side on My Roof Rack?
  The roof rack you're asking about is a Rhino-Rack System with parts # RB1250, # RRRLKHD, # DK376 which has 50" long crossbars. As for if you can carry two kayaks lying down side by side, it's unlikely, but depends on your kayaks. Kayak widths can range from 22" to 30". If you have saddle-style kayak carriers like the Malone SaddleUp Pro # MPG110MD and your kayaks are less than 24" in width, then you can set them up side by side. If your kayaks are too wide though, you can get two J-style...
  view full answer...
• Weight Capacity and Comparison of Rhino Roof Racks for a 2011 Acura RDX
  I spoke with my contact for Rhino Rack and he said the weight capacity for all Rhino-Rack roof racks for your 2011 Acura RDX is 110 lbs. I think you were looking at the Rhino-Rack Heavy-Duty roof rack with the Heavy-Duty crossbars, # RB1375, the leg kit, # RRRLKHD, and Custom DK Clamps and Pads, # DK177. The Heavy-Duty crossbars will have a higher weight capacity, but once they are installed on a 2011 Acura RDX, the entire roof rack capacity drops to 110 lbs due to the limitations on the...
  view full answer...
• Recommended Heavy Duty Roof Rack for 2016 Ford F-150
  I may have a solution for you, however I don't recommend trimming the Rhino-Rack RT-Style Roof Rack Tracks like the 58 Inch # RRRTV148 that you referenced. These strips do feature pre-cut holes for the rivets so trimming any portion of the units will essentially change the way they are meant to attach. You would also need to make sure that the cuts are perfectly straight up and down so the end caps will fit properly. We do have shorter lengths available, such as the 36-1/4 inch # RRRTS540,...
  view full answer...
• Sturdy Roof Rack Recommendation for 2008 Chevy Cobalt
  For a vehicle like your 2008 Chevy Cobalt I would not want to recommend a track style of rack as the best option. The tracks aren't going to flex enough to fit well and the clamp style racks are much sturdier than one might think so even though that's not the option you listed wanting it would be your overall best option still. Rhino Rack does offer a heavy duty roof rack that fits your vehicle with the # RB1250, # RRRLKHD, and # DK181 if you have a sedan or part # DK182 for a coupe but...
  view full answer...
• Dual Kayak Carrier For 2017 Ram 1500 With Tonneau Cover
  I would recommend getting the Rhino-Rack Heavy-Duty Roof Rack Crossbars # RB1500, the Rhino-Rack 2500 Series Legs for Heavy-Duty Crossbars # RRRLKHD and the Custom DK Fit Kit for 4 Rhino-Rack 2500 Series Roof Rack Legs # DK043. I've included a video to help you install if you wanted to go that route. Then the most cost effective carrier would be four of the Malone Rack Pads # MPG314, two per crossbar. The foam pads will be less rough on your kayaks whenever you're going down gravel roads....
  view full answer...
• How Was Rhino Rack Roof Rack Spread for 2014 Chevy Silverado 1500 Decided
  Roof rack companies like Rhino Rack pick the required spread for their roof racks like the # RB1500, # RRRLKHD, and # DK377 based on where the roof is reinforced the best. We have to recommend you always go with the required spread, otherwise you could potentially damage the roof of your vehicle or the rack may not secure properly. Even though the spread is narrower than you'd like (most racks are right at this same spread) you can still use a canoe carrier like the Yakim KeelOver # Y04069...
  view full answer...
• Carrying Plywood Sheets on a 2011 Subaru Forester
  I have a solution for you, but we do not carry large enough roof baskets for this application. Instead, I'd choose a rack that is at least a little wider than the lumber you're intending to carry. This will give you ample room to support the sheet itself, and give you additional room for the tiedowns you'll need in order to keep the panels secure. I've included a link to the range of 54 inch and wider bar kits that fit a 2011 Subaru Forester, but I have a recommendation based on compatibility...
  view full answer...
• How to Mount Putco 40 LED Light Bar on 2006 Honda Ridgeline
  The Putco Luminix Off-Road LED Light Bar # P10040 is a fit for your 2006 Honda Ridgeline as long as you have the Bumper Mounting Bracket # P2255 installed, yes. In order to install something without modifying anything on your Ridgeline we'll have to install a roof rack, like the Rhino-Rack HD model listed below, and then use same-brand LED light mounting brackets like what we find with part # RR43174. 59" HD Crossbars - # RB1500B-2 2500 Series Legs - # RRRLKHD Fit Kit - # DK155 Since...
  view full answer...
• Tonneau Cover and Rack Options for 2007 Honda Ridgeline
  The tonneau cover manufacturers do offer some covers for other trucks that have the T-slots in the side rails that can be used tor installing a ladder rack like the Yakima OverHaul HD, but unfortunately they don't offer anything like this for your 2007 Honda Ridgeline. If the 165 lb capacity of a standard roof rack would work for you, your best bet would be to go with a tonneau cover like the BAK BAKFlip F1 you'd looked at, part # BAK72601 and use a roof rack on the vehicle. I'd recommend...
  view full answer...
• Roof Rack and Platform Recommendation for Roof of 2013 Toyota Highlander
  I have a solution for you, you'd want the Rhino Rack HD roof rack part # RB1375B-2, # RRRLKHD, and # DK138 which will allow you to use a Pioneer Platform Tray part # RR42112BF with the adapter part # RR43105. This has a lower capacity listed for what you are wanting to do but that's based on the application of it being used on the highway. For a situation like yours where the weight won't be bouncing around this would work well assuming your Highlander also has a similar weight capacity....
  view full answer...
• Mounting the Rhino-Rack Batwing Awning to a 2013 Toyota Tacoma
  The Rhino-Rack Batwing Awning, # RR33200 is designed to bolt to a Rhino-Rack Pioneer platform or crossbars with top channels, using hardware sold separately. For your 2013 Toyota Tacoma, you will need the Batwing and Foxwing Awning Relocation Kit for Rhino-Rack Heavy-Duty Crossbars, # RR31102 and note that this awning is only compatible with crossbars that extend past the roof rack's legs. I suggest the Rhino-Rack Heavy-Duty Roof Rack Crossbars - Black - 54", # RB1375B-2 with the Rhino-Rack...
  view full answer...
• Will the Rhino-Rack Heavy-Duty Roof Rack Fit 2015 Ram 1500 Crew Cab with Sunroof
  Yes, the Rhino-Rack Heavy-Duty Roof Rack, which consists of parts # RB1500, # RRRLKHD, and # DK043, will fit your 2015 Ram 1500 crew cab with a sunroof. Placement of the crossbars is very specific and I have included an attachment which illustrates the measurements for your Ram, as well as the measurement process. With these measurements you will be able to determine exactly where the crossbars will sit in comparison to your sunroof.
  view full answer...
  
• Ladder Rack Recommendation for Camper Shell on 2002 Toyota Tacoma
  We have just what you need. For a rack system that will attach to the camper shell you have installed on your 2002 Toyota Tacoma the TraRac CapRac part # TH29200XT is a confirmed fit and would work well. This is a fixed rack that attaches directly to the cap. See picture. I also attached an install video link for you to check out as well.
  view full answer...
  
• Do I Have To Drill Afer Installing The Tracks On The Rhino Rack Roof Rack System # Y01-120-NT?
  The foot # RRRLKHD to crossbar # RB1375B-2 is adjustable along the bar with the kit you're looking at # Y01-120B-NT. The only drilling required is to install the tracks so if they are already installed no need to do any more drilling.
  view full answer...
  
• Recommended Roof Rack For 2015 Honda CR-V With Naked Roof
  We do have a roof rack that will work for your 2015 Honda CR-V. What we have found is that you cannot have factory side rails added to a vehicle after it has been delivered but we have a solution for you. I recommend the Rhino-Rack Vortex Roof Rack. This features anodized aluminum aerodynamic crossbars with a rubberized Vortex strip in the crossbar top channel to disrupt airflow for a quiet ride. Along with the crossbars the system uses the Series 2500 Legs that include locks to secure...
  view full answer...
• Replacement Crossbar, Towers, and Feet for a 2022 Honda CR-V Using Rhino Rack 2500 Series
  Jeff, first of all, I'm relieved to hear you weren't injured in this accident. As far as replacements go, we do have a replacement crossbar with the Rhino-Rack Vortex Aero Crossbar # RRVA137B but the towers and fit kit are only sold as a complete set with # RRRLKVA & # DK284. Hopefully no more turkey accidents in the future, but if it happens again we have you covered! Feel free to drop a comment and let me know if there is anything else I can do to help!
  view full answer...
• Naked Roof Rack Recommendation for 2013 Honda CRV to Carry Longer Roof Box for Skis
  The naked roof racks that fit your 2013 Honda CR-V do put the front bar significantly closer to the windsheild like with the Rhino Rack part # RRVA137B-2, # RRRLKVA, and # DK284 we have installed on a 2013 CR-V so this would be the way to go. I attached a picture that shows the front bar is more than the amount of inches forward that you would need plus an install video on a similar 2014 CR-V as well.
  view full answer...
  
• What Roof Rack and Kayak Carrier Package is Recommended for a 2019 CRV?
  I recommend the Rhino rack package including the Vortex Aero Crossbars # RRVA137B-2, Rhino-Rack Legs for Vortex Aero Crossbars # RRRLKVA, and the Custom DK Fit Kit for 4 Rhino-Rack Roof Rack Legs # DK284. The Rhino-Rack is sturdy, has an attractive design to compliment your CRV, and the aero bar design reduces wind noise and is also a great value. If you want a premium rack option for a newer vehicle like your 2019 Model CRV, the Thule package Thule WingBar Evo Crossbars # TH711400, Evo...
  view full answer...
• Rhino-Rack Aero Bar Roof Rack for a 2014 Honda CR-V with Naked Roof
  Yes, Rhino-Rack roof rack # RRVA137B-2 will fit your 2014 Honda CR-V as long as it has a naked roof (no rails that run front to back or crossbars that run side to side). You will also need fit kit # DK284, and legs # RRRLKVA to install the roof rack. The bars are indeed 54 inches long overall.
  view full answer...
  
• Will Thule Force XL Rooftop Cargo Box TH625 Allow Trunk Access On 2021 Honda CRV?
  The Thule Force XT XL Rooftop Cargo Box - 18 cu ft - Black AeroSkin # # TH6358B requires a hatch clearance of at least 51-1/8" in order to open the rear hatch without interference. Hatch clearance is the distance from the center of the front crossbar to the line where the roof and trunk meet. Since you don't have a roof rack installed yet, you won't be able to get an accurate measurement unless you look at the instructions to the roof rack you are installing. You could go with the Rhino-Rack...
  view full answer...
  
• Can Thule Hullavator Install on Rhino Rack Vortex Roof Rack of 2021 Honda CR-V
  If there was a way to lighten your kayak by 5 lbs the Thule Hullavator part # TH898 that you referenced would work great but it has a 75 lb weight capacity. This does fit the Rhino Rack Vortex Aero roof racks though like the part # RRVA137B-2, # RRRLKVA, and # DK284 that you have.
  view full answer...
• Recommended Roof Rack For A 2022 Honda CR-V To Carry 2 Kayaks
  We definitely have a roof rack available for your 2022 Honda CR-V Hybrid. With your vehicle having a naked roof, it will not cause any issues either. With that being said, the Rhino Rack Rhino Rack Vortex Aero Bar - Aero Roof Rack will be an excellent option for your vehicle. You will first need the DK Fit Kit for 4 Rhino-Rack 2500 Series Roof Rack Legs # DK284, which is specific to your CR-V and will clamp into the door jambs. This will allow the 2500 Series Legs for Vortex Aero Crossbars...
  view full answer...
• Roof Rack and Cargo Basket Recommendation for 2015 Honda CR-V with Naked Roof
  You came to the right place! We can help you with selecting both a roof rack and a rooftop cargo carrier for your new 2015 Honda CR-V. Good luck with the new car. Since you will be using a cargo carrier, and since these too generate some wind noise, I suggest you go for the Rhino-Rack 2500 Series rack referenced above. This aero bar system will work just fine for either an open metal cargo basket or an enclosed plastic cargo box. it consists of parts # RRVA137B-2, # RRRLKVA, and # DK284....
  view full answer...
• Recommended Roof Rack for 2019 Honda CR-V to Carry a Canoe
  The roof rack I strongly recommend for your 2019 Honda CR-V is the Rhino-Rack Roof Rack because it gives your CR-V a rack that is highly functional with a refined look. The Rhino-Rack Roof Rack is made up of: - Crossbars # RRVA137B-2 - Rhino-Rack 2500 Series Legs # RRRLKVA - Fit Kit # DK284. This roof rack uses aerodynamic bars that have rubber vortex strips in its top channels which greatly minimize the amount of wind noise and drag you might encounter. The design of the bars, as well...
  view full answer...
  
• 2020 Honda CRV Roof Rack Capacity Options
  Certain manufactures give lower capacities to make sure the customers are being safe when using their products. That being said, always go by the lowest rated component. Your 2020 Honda CRV roof is rated for 165 so I would suggest not getting a Thule rack. I recommend getting the Rhino-Rack Vortex Aero Crossbars # RRVA137B-2, Rhino-Rack 2500 Series Legs # RRRLKVA, Custom DK Fit Kit # DK284. Rhino Rack rates this system for 165 lbs. I like the looks of this flat black roof box # TH6357B....
  view full answer...
• Where Does Rhino Rack Fit Kit Install on 2019 Honda CR-V
  I looked up your order and found out you have the Custom DK Fit Kit for 4 Rhino-Rack 2500 Series Roof Rack Legs part # DK284. I have then attached for you below a photo that shows where to install said fit kit on a 2019 Honda CR-V.
  view full answer...
  
• Can Roof Rack Bars be Spaced Farther Apart on 2018 Honda CR-V With Naked Roof
  The Rhino-Rack Vortex Aero Crossbars # RRVA137B-2 you referenced having are a fit for a 2018 Honda CR-V using Rhino-Rack 2500 Series Legs # RRRLKVA and Custom DK Fit Kit # DK284 so long as you have a naked roof. Since this is a clamp-on rack, you may be able to technically move the bars to a larger spread to use the Yakima MegaWarrior Extra Large Roof Rack Cargo Basket # Y07080-82 (which requires a crossbar spread of between 36" and 60") but I cannot recommend it. The spread of the bars...
  view full answer...
• Will A Roof Rack And Rooftop Cargo Box Fit On My 2019 Honda CR-V And NOT Exceed 84" In Height
  Your 2019 Honda CR-V has a height between 66.1" and 66.5". This gives you up to 17.5" for a roof rack and a rooftop cargo box on the top of your vehicle. The lowest profile rooftop cargo boxes we offer are 11" in height. Unfortunately, they will only offer up to 11 cu ft of space, which is half of the 22 cu ft rooftop cargo box you attached to your question. You will need a roof rack for your 2019 Honda CR-V, but there are different roof types. Here are my roof rack recommendations. Flush...
  view full answer...
• Roof Rack to Mount a Thule SnowPack Ski Carrier to a 2012 Honda CR-V
  In order to use the Thule SnowPack ski carrier # TH7325 your 2012 Honda CR-V will need to have a roof rack. If your CR-V has a naked roof with no side rails that run front to back then the most cost-effective compatible roof rack is from Rhino-Rack using the following parts: Crossbars # RRVA137B-2 Feet # RRRLKVA Custom clamp kit # DK284 If the CR-V has the flush side rails that run front to back then you can use Rhino-Rack roof rack # RRRVP33 which attaches to the side rails without...
  view full answer...
• How to Carry a Kayak on a 2014 Honda CR-V without a Roof Rack
  You have a couple of options to carry the kayak on the roof of your 2014 Honda CR-V. First, if you don't want to spend a lot of money I recommend a foam block kit, # RL100K10. The blocks set on the vehicle roof and the kayak will rest on the blocks. You will use the included straps to tie down the bow and stern and to secure everything to the vehicle by routing 2 of the straps through the interior of the vehicle. The other option is to install a roof rack and use a carrier on the new rack....
  view full answer...
• Can a Roof Rack Be Installed on a 2015 Honda CR-V with Sunroof
  You can certainly install a roof rack on your 2015 Honda CR-V however, it is not advised to open the sunroof due to both wind noise and the potential for interference. The correct roof rack for you would depend on the roof configuration of your vehicle. If you have a bare roof then I recommend the Rhino-Rack Vortex Aero Crossbar System which is composed of the crossbars part # RRVA137B-2, mounting feet part # RRRLKVA, and fit kit part # DK284.
  view full answer...
• Recommended Roof Rack For 2013 Honda CR-V With Sunroof To Carry Thule Evolution Cargo Box
  The Rhino-Rack 2500 Series Roof Rack with Vortex Crossbars would work well with your 2013 Honda CR-V and your Evolution Cargo Box. I called my contact at Thule and the Evolution is designed to fit square crossbars only. The roof rack has 54 inch long crossbars that measure 1-1/4 x 7/8 inches and have a weight capacity of 165 lbs. For this roof rack you would need parts # RRVA137B-2, # RRRLKVA, and part # DK284. The clamps for the roof rack are designed to fit the curves of door jambs on...
  view full answer...
• Roof Rack Recommendation for 2013 Honda CR-V with Naked Roof
  Thule and Yakima make the nicest aftermarket roof racks you can get. But you get what you pay for with them and the prices reflect that. What I really like about Rhino Rack is that they offer you a very high quality roof rack at a much lower price. Basically you wouldn't know the difference between a Rhino Rack or a Thule/Yakima so I like to recommend them the most as it's just the best deal and what I would buy. The Rhino Rack bar kit part # RRVA137B-2, # RRRLKVA, and # DK284 is a fit...
  view full answer...
• Will Malone Axis Truck Bed and Roof Load Extender Work for Kayak in Back Hatch on 2015 Honda CR-V
  It's probably not the best way to transport a kayak on a 2015 Honda CR-V but it's also not the worst. The Malone Axis Truck Bed and Roof Load Extender with Load Roller part # MAL32VR should work fine for what you're wanting although there's going to be more wear and tear on your vehicle sliding the kayak in and out each time. If you can budget a bit more you can get a much better setup hauling the kayak on the roof using a combo of the Rhino-Rack Vortex Aero Crossbars System composed...
  view full answer...
• Does Thule SUP Shuttle Carrier Fit 2016 Honda CR-V with Naked Roof
  Yes, I checked with Thule just now and the Thule SUP Shuttle part # TH811XT is a confirmed fit for your 2016 Honda CR-V but you will need a roof rack installed like the Rhino Rack roof rack part numbers # RRVA137B-2, # RRRLKVA, and # DK284.
  view full answer...
• Roof Rack for 2019 Honda CR-V To Carry Kayak and Paddle Board
  You'll first need to install a roof rack on your 2019 Honda CR-V to carry a kayak and a stand up paddleboard. For that the Rhino Rack roof rack part numbers # RRVA137B-2, # RRRLKVA, and # DK284 is a really great choice. It will give you an aero shaped (quieter) roof rack with longer bars at 54 inches to give you the room needed for the kayak carrier and board carrier. For carriers you'd then want the SUP Taxi part # TH810001 to carry the paddle board and then for the kayak carrier you'd...
  view full answer...
• Height Difference Between Front And Rear Crossbars For Roof Rack On 2013 Honda CR-V
  I am glad the roof rack seems to be working great on your CR-V. The difference in the height of the legs on the roof rack from the front to the back may be due to the contour of the roof on your CR-V but you may want to check the installation instructions again to make certain you have them placed in the right position and at the correct distance.
  view full answer...
• Roof Rack Recommendation for 2017 Honda CR-V With Naked Roof
  There is a really good option for a roof rack that is not difficult to install and will fit perfectly on your 2017 Honda CR-V with a naked roof, and I highly recommend going with Rhino-Rack. I really like the Rhino-Rack option because not only is it strong, quiet, and durable, it offers a better value because it is more economical than similar brand roof racks while not sacrificing anything in terms of quality. The parts that make up the Rhino-Rack Roof Rack for your 2017 CR-V with a...
  view full answer...