See what our Experts say about this Rhino Rack Roof Rack

• Higher Weight Capacity Ladder Rack that Fits 2019 Ford F-250
  Since your plan is to install the Retrax PowerTrax Pro XR # RTT-80384 if you have a long bed or # RTT-80383 for if you have a short bed all you'd need to install a Yakima OverHaul HD part # Y01151-58 ladder rack which has a 500 lb capacity would be the adapter # Y01155 and that would be covered. Now if you do need more weight capacity the TracRac sliding ladder racks like the # TH43003XT-785 for short bed or # TH43003XT-000 for a long bed and these do have a weight capacity of 1,250 lbs....
  view full answer...
• Rhino-Rack Roof Rack Recommendation for a 1989 Mitsubishi Montero with a Naked Roof
  You are correct, the Rhino-Rack Roof Rack Legs that you need for your 1989 Mitsubishi Montero are part # RL280S4. These are the gutter mount feet and they are 11 inches tall. For crossbars, you can use their Heavy-Duty Crossbars, # RB1375B-2 for black or # RB1375 for silver. I have attached the installation instructions for you to check out.
  view full answer...
  
• Comparison of Rhino-Rack Heavy-Duty and Rhino-Rack Vortex Aero Roof Racks
  The Rhino-Rack Heavy-Duty Roof Rack Roof Rack have specific C-channels that are designed to fit specific Rhino-Rack Heavy-Duty accessories, like the Rhino-Rack Hi-Lift Jack and Shovel-Holder Brackets # RRRCB-RSHB-RJHB as an example. That's the purpose of the name, and the advantage of the rack. This rack is made up of the following parts: Rhino-Rack Heavy-Duty Roof Rack Crossbars: # RB1375 Qty 2 Rhino-Rack Quick Mount Legs: # RRRLT600 Qty 4 Roof Rack Leg Spacer Blocks: # RRQMHD05-2 Qty...
  view full answer...
• Roof Rack Recommendation for 2019 Hyundai Elantra and iKamper
  For a 2019 Hyundai Elantra with a naked roof, I suggest the Thule SquareBar Evo Crossbars, 53" Long, # TH712400. These will mount to a GT model with or without a glass roof using using the Evo clamp feet, # TH710501 and the fit kit, # TH145112. Or, if you have a sedan, use the Evo clamp feet, # TH710501 and the fit kit, # TH145069. These crossbars have a weight capacity of 220 lbs. The weight a roof rack can support is also limited by the roof capacity for the vehicle, this is outlined...
  view full answer...
• Carrying Plywood Sheets on a 2011 Subaru Forester
  I have a solution for you, but we do not carry large enough roof baskets for this application. Instead, I'd choose a rack that is at least a little wider than the lumber you're intending to carry. This will give you ample room to support the sheet itself, and give you additional room for the tiedowns you'll need in order to keep the panels secure. I've included a link to the range of 54 inch and wider bar kits that fit a 2011 Subaru Forester, but I have a recommendation based on compatibility...
  view full answer...
• Tonneau Cover and Rack Options for 2007 Honda Ridgeline
  The tonneau cover manufacturers do offer some covers for other trucks that have the T-slots in the side rails that can be used tor installing a ladder rack like the Yakima OverHaul HD, but unfortunately they don't offer anything like this for your 2007 Honda Ridgeline. If the 165 lb capacity of a standard roof rack would work for you, your best bet would be to go with a tonneau cover like the BAK BAKFlip F1 you'd looked at, part # BAK72601 and use a roof rack on the vehicle. I'd recommend...
  view full answer...
• Weight Capacity and Comparison of Rhino Roof Racks for a 2011 Acura RDX
  I spoke with my contact for Rhino Rack and he said the weight capacity for all Rhino-Rack roof racks for your 2011 Acura RDX is 110 lbs. I think you were looking at the Rhino-Rack Heavy-Duty roof rack with the Heavy-Duty crossbars, # RB1375, the leg kit, # RRRLKHD, and Custom DK Clamps and Pads, # DK177. The Heavy-Duty crossbars will have a higher weight capacity, but once they are installed on a 2011 Acura RDX, the entire roof rack capacity drops to 110 lbs due to the limitations on the...
  view full answer...
• Roof Rack and 2-Kayak Carrier for 2016 Honda Accord Sport Sedan
  The Rhino-Rack ROC25 Series Heavy-Duty roof rack for your 2016 Honda Accord Sport Sedan that is made of parts # RB1375, # RRRLKHD and # DK359 is indeed a confirmed fit for your car. But note that this rack's unusual bar profile means reduced compatibility of accessory items like kayak carriers. You will have fewer kayak carrier choices with this rack. Instead I suggest their Vortex Aero rack # RR32SR which features quieter aerodynamic crossbars that will generate much less wind noise than...
  view full answer...
• Roof Rack Recommendation For 2005 Scion xB
  I understand how it can be a bit confusing so I will do what I can to help out. We do offer several different roof racks that are designed to fit your 2005 Scion xB. The main differences you will find are due to the design of the crossbars. Square crossbars can be quite a lot noisier than some of the more aerodynamic crossbars we offer. For a nice roof rack for your vehicle, I recommend the Rhino-Rack RS 2500 Roof Rack for Naked Roofs, part # RRRS434B. This system has aerodynamic aluminum...
  view full answer...
• Would Two Sets of Rhino Rack Heavy Duty Bars Double Roof Rack Capacity
  You would be doubling the weight capacity of the roof rack components of the setup but most likely you'd be limited by the roof capacity as the HD Rhino Rack roof rack components do have a capacity of 220 lbs. You'd need a set of tracks like the part # RTC16, four sets of the feet part # RLT500, and two sets of the 65 inch Rhino Rack bars part # RB1650B-2.
  view full answer...
• Roof Rack / Crossbar Options For 2020 Ford Escape With Or Without Existing Rails
  I have a solution for you, however, my contact at Rhino-Rack confirmed that the Rhino-Rack Heavy-Duty Roof Rack Crossbar # RB1375 is not compatible with your 2020 Ford Escape. It looks like you have a naked/bare roof, in which case you will want to use Rhino-Rack # RR86TB. This kit comes with everything necessary for installation and is going to be your best option for your vehicle with the naked roof and no factory rails of any kind. This setup has a weight capacity of 165lbs and comes...
  view full answer...
• 2017 Hyundai Santa Fe Sport with Panoramic Sunroof and Flush Rails
  Rhino Rack does offer roof racks that fit the low profile flush rails you have on the roof of your 2017 Hyundai Santa Fe Sport with the part numbers # RRVA137B-2 and # RRSX032 but the HD bar kit you mentioned would only fit the versions of your vehicle without the flush rails. This is an aero bar style rack too which means you'd have minimal wind noise as well as better fuel mileage. The sunroof you have won't be an issue for sure when it's closed, but Rhino Rack recommends checking for...
  view full answer...
• Roof Rack, Canoe Carrier and Bike Carrier for 2007 Ford Edge w/ Panoramic Roof
  The Rhino Rack Heavy Duty Crossbar Roof Rack, which consists of the # RB1375 crossbars, the # RRRLKHD roof rack legs and the # DK228 clamp kit would be a fit for a 2007 Ford Edge. You'll want to be careful about opening the sunroof with the roof rack in place. The rack or accessories mounted on it might interfere with the operation of the sunroof. Although the crossbars themselves have a 140 lb weight capacity, you might be limited by the roof capacity of the vehicle if it's capacity...
  view full answer...
• Recommended Roof Rack For A 2012 GMC Sierra W/ Extended Cab On A Naked Roof
  I do have a roof rack option that will fit your 2012 GMC Sierra Extended Cab. Unfortunately, it will not be a Thule Rack because the fit kit has been discontinued. I do have a Rhino-Rack alternative that has a maximum weight capacity of 130 lbs with their heavy duty crossbar. This rack will consist of the following items: Rhino-Rack Heavy-Duty Roof Rack Crossbars - Silver - 54" Long - Qty 2, part # RB1375 Rhino-Rack 2500 Series Legs for Heavy-Duty Crossbars - Naked Roofs or Fixed Mounting...
  view full answer...
• Roof Rack Recommendation for a 2007 Chevy Avalanche for Transporting Ladder
  For your 2004 Chevy Avalanche the Rhino Rack roof rack part numbers # RRVA137B-2, # RRRLKVA, and # DK227 has been confirmed as a fit and would work well. Your sunroof wouldn't be an issue either. I would recommend keeping it closed since it will be very loud transporting a ladder up there from the wind noise. However, I have a better solution for you in terms of a roof rack for securing a ladder. Instead I would recommend the Rhino Rack HD bar roof rack part numbers # RB1375, # RRRLKHD,...
  view full answer...
• Can Low Rider Towers Fit on Truck Cap Tracks for 2007 Chevrolet Silverado
  Yakima's discontinued Low Rider towers hooked onto raised side rails and then clamped onto crossbars. If you already have these towers, they do not fit the Yakima 60" Tracks for Roof Racks # Y01135 as these are horizontal track systems and not raised side rails. If you're looking for tracks for your truck, I can recommend the Rhino-Rack RTC-Style Roof Rack Tracks - Channel Mount - 71" Long # RTC18 along with Track Mount RLTP Legs # RLTP and Rhino-Rack Heavy-Duty Roof Rack Crossbars -...
  view full answer...
• Recommended Heavy Duty Roof Rack for 2011 GMC Sierra 3500 Crew Cab with Naked Roof
  For your 2011 GMC Sierra 3500 Crew Cab with a naked roof, the Rhino-Rack Heavy-Duty Roof Rack referenced in your question is indeed confirmed to fit the roof of your truck. This system consists of # RB1375 for the two 54 inch Heavy-Duty Crossbars, # RRRLKHD for the 2500 Series Legs, and # DK227 for the Custom DK Fit Kit. This system will provide you with extremely durable aluminum crossbars with built-in C-channels for mounting Rhino-Rack, contractor-grade accessories. The bars themselves...
  view full answer...
• What Parts do I Need with My Rhino-Rack 54" HD Crossbars to Fit on My 2012 Ford Edge with Bare Roof?
  According to my research of your Rhino-Rack part number 1375, I think you are most likely referring to the Rhino-Rack Heavy Duty Crossbars -54" Long # RB1375B-2 (black) or # RB1375 (silver) which are confirmed to fit a bare-roof 2012 Ford Edge. If this is what you have, you need the Rhino-Rack 2500 Series Legs # RRRLKHD and the Custom DK Fit Kit for 4 Rhino-Rack 2500 Series Roof Rack Legs - Naked Roof # DK228. With both of these components, you will have a full roof rack system on your...
  view full answer...
• Rhino Rack Roof Rack Fit for 2013 Ford Escape
  To install the Rhino Rack Heavy Duty Crossbars on your 2013 Ford Escape you will want to use crossbars # RB1375, leg kit # RRRLKHD, and custom clamps and pads # DK375. If you are interested in the Rhino Rack Aero Crossbars, use # RRVA137B-2, # RRRLKVA, and # DK375. I have attached an installation video of the Rhino Rack aero crossbars on a 2013 Ford Escape for you.
  view full answer...
• Roof Rack Mounted Fork Mount Bike Rack Recommendations for a 2016 Toyota Highlander
  A popular roof rack mounted bike rack, fork mount, that is very stable is the Rhino-Rack MountainTrail # RBC035. This carrier is also compatible with disc brakes, accommodates bike wheels up to 3" in diameter, and uses a 9mm skewer. I have linked a video review of this carrier for you. If your bike has a through-axle then I recommend the Yakima HighSpeed, # Y02115. It is designed to hold a bike with a 12-mm, 15-mm, or 20-mm thru-axle fork without an adapter. I have linked a video review...
  view full answer...
• Does the Rhino-Rack HD Crossbars # RB1375 Fit a 2021 Nissan Sentra?
  I have a great alternative for you. Unfortunately, the Rhino-Rack Heavy Duty Crossbars # RB1375 will not fit your 2021 Nissan Sentra. For heavy-duty bars that are confirmed to fit your 2021 Nissan Sentra with a bare roof, I recommend the following parts: - Yakima HD Crossbars - Aluminum - Black - 55" Long - Qty 2 # Y01156 - BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 # Y28TR - HD Bar SL Adapter for Yakima BaseLine, SkyLine, TimberLine, and RidgeLine Towers - Qty 4 # Y03541 -...
  view full answer...
• Will Rhino Rack HD Roof Rack Fit 2012 Honda CR-V with Moon Roof
  The Rhino Rack HD Roof Rack part numbers # RB1375, # RRRLKHD, and # DK284 is a confirmed fit for your 2012 Honda CR-V. It will fit your vehicle with the moonroof, but if your moonroof angles up when opening it could potentially interfere with the bars. You should note that crossbars typically add quite a bit of wind noise. You won't end up wanting to have the moonroof open with the bars installed as it will be quite noisy.
  view full answer...
• Recommended Roof Rack For 2012 Silverado LTZ 4-Door To Carry Small Aluminum Boat
  We do have roof racks that will work great on your 2012 Silverado. I recommend the Rhino-Rack heavy-duty roof rack. This roof rack has a 130-lb weight capacity. To order this roof rack you need part # RB1375, part # RRRLKHD, and part # DK227. I recommend securing the boat to the crossbars and to the vehicle for added security. For bow and stern tie-downs you may want to check out part # SR0704.
  view full answer...
• Roof Rack Recommendation for a 2015 Hyundai Santa Fe Sport with Naked Roof
  The factory side rails on vehicles usually can't be installed on models that did not originally come with them but that would be a question best handled by a Hyundai dealer who will then probably steer you towards an aftermarket roof rack. So we can cut out the middle man and go right to an aftermarket roof rack. The addition of the clamps on a roof rack does not add any extra wind noise compare to models that don't have a clamp style roof rack. In fact, it is entirely possible, even likely,...
  view full answer...
• Which Rhino Rack Pioneer Platform Can Attach to Vortex Aero Crossbars
  I have a solution for you, but the Rhino Rack Pioneer Platform # RR25TB is designed to mount directly to either a Rhino Rack fit kit or Rhino Rack HD bars so you'll need a Pioneer platform that mounts to crossbars. There are 2 different sizes of the Pioneer platform that can be attached to Rhino Rack Vortex Aero bars: - Rhino-Rack Universal Pioneer Platform Rack for Crossbars - Aluminum - 48" Long x 38" Wide # RR42114BF - Rhino-Rack Universal Pioneer Platform Rack for Crossbars - Aluminum...
  view full answer...
• What Roof Rack Do You Recommend for a Camper Shell with Tracks?
  For a great roof rack system for your A.R.E. Mx truck cap, I recommend the Rhino-Rack Roof Rack for Factory Tracks - 59" # Y02-490B-NT. The Rhino-Rack Roof Rack includes 2 Vortex Aero black, elliptical crossbars that you can use to hold ladder racks, conduit cases, and other work accessories. In addition, the Rhino-Rack Roof Rack crossbars come with a 220 pound weight capacity. I recommend checking the user's manual on your camper shell to make sure it can accommodate that much weight. If...
  view full answer...
  
• Will the Rhino-Rack RLTP Legs Fit on My Retrax XR Cover on My 2018 Ford F-150?
  I have a great solution for a rack that works with the rails on your Retrax XR tonneau cover on your 2018 Ford F-150. Unfortunately, the Track Mount RLTP Legs for Rhino-Rack RTC- and RT-Style Roof Rack Tracks - 2" Tall # RLTP-2 will not fit the Retrax XR rails. However, Rhino-Rack does make legs that are designed to fit the Retrax XR rails. Those are the Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars - RTC and RT Roof Rack Tracks # RRRLT600. Sadly, with these legs, you will not...
  view full answer...
• Can I Fit A Rhino Rack Pioneer Platform To My Retrax XR Series Tonneau Cover
  You have two options; The first option is to install the Rhino-Rack Vortex Crossbar System for Retrax XR Series Tonneau Covers - Black - 65" Long, part # RRVA165B and part # RRRLT600. The feet attach directly to the RetraxPrO XR Hard Tonneau Cover - Retractable - Aluminum - Matte Black - Accessory T-Slots, part # RTT-80852. The Vortex Aero crossbars will attach to the the legs. With this fit you will be limited to Rhino-Rack Universal Pioneer Platform Rack for Crossbars - Aluminum - 48"...
  view full answer...
• Roof Rack or Ladder Rack for Trailer For Roof Top Tent
  There are a couple options to add a rack system to your trailer, depending on what type of trailer you have. For an enclosed trailer with rain gutters you can install the Rack'em Fitz-All Enclosed Trailer Ladder Rack # RA-28. Another option is to use a track-mounted system from Rhino-Rack. You will need the Rhino-Rack RT-Style Roof Rack Tracks - Rivet Mount - 50" Long # RRRTV128, Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars - RTC and RT Roof Rack Tracks # RRRLT600 and crossbars,...
  view full answer...
• What Adapter Will Fit My Retrax Tonneau Cover to Let Me Use the Yakima OverHaul HD on My 2019 Tacoma
  If you have a Retrax tonneau cover on your 2019 Toyota Tacoma (5-ft. bed) like the RetraxONE XR # RTT-60851 or the RetraxPRO XR # RTT-80851, the adapter that you need to use the Yamkima OverHaul HD # Y01151-58 is the Tonneau Cover Adapter Kit for Yakima OverHaul HD # Y01155. As far as mounting a Rhino-Rack pioneer platform on the OverHaul HD, the only platforms that will fit are the Rhino-Rack Universal Pioneer Platform Rack part # RR42114BF which is 48" long x 38" wide and part # RR42115BF...
  view full answer...
• Parts Needed To Mount A Rhino-Rack Platform To The Roof Of A Ford E-350
  Hey William, What is the year of your Ford E-350? There might be a naked roof fit kit that can fit. If not you would need to go with the Rhino-Rack RTC-Style Roof Rack Tracks - 55" Long # RTC14 and rivet it to the roof. If needed you can cut the length down from the side without the opening in the channel for accessories to better fit your roof. From there you can then install the Rhino-Rack Quick Mount Legs # RRRLT600 and some spacers blocks # RRQMHD05 to connect the platform directly...
  view full answer...
• Best Way To Carry Cargo on a 2016 Honda Odyssey
  I would love to help but none of the roof bags for a bare roof will work with a sliding rear door. Therefore, the Rightline Gear Sport 3 Rooftop Cargo Bag part # RL100S30 will not fit your 2016 Honda Odyssey unless you first install a roof rack like the Rhino-Rack Vortex Aero Crossbar System which consists of part # RRVA126B-2, part # RRQMVA10, part # RRRTV168, and part # RRRLT600. The next best option which is also more cost effective would be to install a trailer hitch like the etrailer.com...
  view full answer...
• Recommended Truck Bed Crossbar Kit for a 2024 GMC Sierra 1500
  Tony, the only way I understand you'd be able to use your Rhino-Rack bars # RR63ZE with your 2024 GMC Sierra is by installing a tonneau cover with T-slots so you can then use the Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars # RRRLT600. If you didn't want to also install a tonneau cover, then your only other option would be a new system in which you could use the Yakima BedRock HD Truck Bed Rack # Y01160-59, which would not require a tonneau cover, simply just clamps onto your...
  view full answer...
• Can Rhino Rack Sportz Aero Crossbars be Used in ARE Cap Channels
  Hey Ken, yes you can use the Rhino Rack crossbar set part # RR25AG in the tracks of your ARE cap with the feet kit part # RRRLT600 and you'd be set. What are you planning on carrying with the rack?
  view full answer...
• Can the Pioneer Platform Rack Fit the Rebel Off Road Xplor Rack?
  Hey Dave, thanks for reaching out! Your best bet is going to be a combination of the Rhino-Rack Quick Mount Legs # RRRLT600. These mount directly to the Pioneer Platform Rack and then mount to a track system using the T-Bolts that are spaced 2-5/8" apart on center (see attached). I reached out to Rebel Off Road and they suggested checking out their Tent Standoff Brackets and/or their Cross Bar Mounting System, but none of this has been tested together so I can't confirm any of this will...
  view full answer...
• Recommended Crossbars and Feet for a LEER Camper Shell with Thule Tracks
  Ok Sean, so I was able to track down some info about your LEER camper shell and it looks like you ordered it with the Thule tracks already installed. So, if that's the case, you can then use either the Thule Tracker II feet with the Thule WingBar Crossbars # TH711520, or you can use the Rhino-Rack Vortex Aero Crossbars # RRVA165B-2 with the Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars # RRRLT600 for a more cost-effective non-Thule setup.
  view full answer...
• Roof Kayak Carrier Recommendation for a 2014 Honda Odyssey EX-L with Moon Roof
  Foam block carriers such as Malone Deluxe Kayak Carrier - Foam Block Style Item # MPG152 are designed as a temporary, short-distance solution to carry a kayak. On a van that has sliding side doors they wouldn't work because on a naked roof it would require running straps through the interior of the vehicle. You would instead need a roof rack for your van. I can make some recommendations if you can tell me the year, make, and model of the van.
  view full answer...
• Will the Heavy Duty Rhino-Rack Roof Rack Fit a 2015 Nissan NV 3500?
  I have a great alternative for your crossbar setup. Unfortunately, the Rhino-Rack Roof Rack for Thule and Yakima Tracks # Y01-140B-NT is not confirmed to fit your 2015 Nissan NV 3500. However, we do carry a similar heavy duty bar setup by Rhino-Rack that does fit your 2015 Nissan NV 3500. For this setup, I recommend the following parts: - Rhino-Rack Heavy-Duty Roof Rack Crossbars # RB1375B-2 - Rhino-Rack 2500 Series Legs for Heavy-Duty Crossbars # RRRLKHD - Custom DK Fit Kit for 4 Rhino-Rack...
  view full answer...
  
• How to Use Yakima Round Crossbars with a Set of Rhino-Rack RTC-Style Roof Rack Tracks
  There are adapters for the Rhino-Rack Quick Mount Legs part # RRRLT600 that will allow you to use square crossbars but not round crossbars. If you can tell me what you are trying to do or what you have/need I would be happy to see if we have any other options for you.
  view full answer...
• Rhino-Rack Roof Rack for Truck Cap Track System
  For your truck topper with existing track system, I recommend the Track Mount RLTP Legs for Rhino-Rack RTC- and RT-Style Roof Rack Tracks - 2" Tall - Qty 2 # RLTP along with the Rhino-Rack Heavy-Duty Roof Rack Crossbars - Black - 65" Long # RB1650B-2. If you prefer the vortex style bars then use Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars - RTC and RT Roof Rack Tracks - Qty 4 # RRRLT600 and # RRVA165B-2.
  view full answer...
• Will 65" Rhino-Rack Crossbars Fit RetraxPRO XR Tonneau Cover T-Slots On A Ford F-150
  Hey Zach, Rhino-Rack crossbars have an 11-3/4" mounting track on the both sides of the bottom of the crossbar. At 65" this would mean that the spacing of the t-slots in your cover would need to sit roughly 55" to 64" apart in order to fit. To mount the 65" crossbars # RRVA165B-2 in the track you'll need their quick-mount legs # RRRLT600.
  view full answer...
  
• What Mounting System Do I Need to Use for the Pioneer Platform # RR42108BF on My Leer 100XR Shell?
  I have a great platform solution for you. Unfortunately, the Rhino-Rack Pioneer Platform 72" Long x 56" Wide RR42108BF is discontinued. However, with the recommended fit of the Rhino-Rack Pioneer Platform Rack for Short Camper Shells - Backbone - 60" Long x 56" Wide # RR63ZW, you will have both the platform and the mounting hardware available for installation with the modular Backbone. The Modular Backbone is designed to fit the track on the 100XR.
  view full answer...
• Will 59" Crossbars Work on a 2003 Chevrolet TrailBlazer EXT?
  Yes, they will Justin. The 59" Rhino-Rack Vortex Aero Crossbars item # RRVA150B-2 will attach to the roof of your 2003 Chevrolet TrailBlazer EXT using the Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars item # RRRLT600. You are correct they are going to over hang quite a bit. The 46" Long Rhino-Rack Vortex Aero Crossbar item # RRVA118B are what's recommended for your Trailblazer. The Yakima ForkLift Roof Mounted Bike Carrier item # Y02098 will definitely work with Rhino-Rack crossbars....
  view full answer...
• Length of Rhino-Rack RT-Style Roof Rack Tracks RRRTS547 on 2017 Toyota Tacoma Double Cab
  The tracks included in the Rhino-Rack RT-Style Roof Rack kit # RRRTS547 (same as RTS547) are each 47" inches long. These are not the crossbars but the rivet-mount tracks that mount permanently to a vehicle or camper shell roof to allow installation of track-mount legs such as # RRRLT600. These legs in turn accept crossbars like # RRVA150B-2 which are 59-inches long; other lengths are available. It sounds like you may prefer a custom-fit cab roof rack rather than a general-purpose track-based...
  view full answer...
• Replacement Leg Tower and Foot for a Rhino Rack RTL600
  Hey Steve! I do not have an individual set of the Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars item # RRRLT600 but I have a two pack item # RRRLT600H.
  view full answer...
• Best Roof Rack Options for a 2016 Land Rover Discovery/LR4
  Absolutely! A Land Rover Discovery is referred to as the Land Rover LR4 here in North America. This is not to be confused with the Land Rover Discovery Sport which is an entirely different vehicle altogether. The Discovery/LR4 came with two different roof options which were a bare roof and roof with factory installed tracks. If you have the factory installed track system then you can use the Rhino-Rack Vortex Aero Crossbar System which is composed of the the crossbars part # RRVA137B-2,...
  view full answer...
• Roof Rack Tracks & Basket That is Heavy Duty
  Hi Morris, While there isn't anything specific to your 2022 Roxor, there are rivet-mounted tracks you can add. I'm not sure the length you need, but the shortest available is the 36-1/4" long Rhino-Rack RT-Style Roof Rack Tracks # RRRTS540. Then you'd need a roof rack that fits the tracks, and for that you would add the Rhino-Rack Quick Mount Legs # RRRLT600. To complete the rack set up you'd need crossbars, with the right length depending on the width of your roof/cab enclosure. You...
  view full answer...
• Recommended Tonneau Cover and Bike Rack for a 2024 Ford Ranger
  Hey John, welcome back and thanks for the email! I was able to track down all of the parts in the pictures you provided and find the same model tonneau cover that fits your 2024 Ford Ranger XLT with a 5' bed. I have listed all of the parts below: Pace Edwards UltraGroove Metal Retractable Hard Tonneau Cover - Aluminum - Matte Black item # PE94NJ Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars - RTC and RT Roof Rack Tracks - Qty 4 item # RRRLT600 Rhino-Rack Vortex Aero Crossbars...
  view full answer...
• Will the Heavy Duty Rhino-Rack Roof Rack Fit a 2015 Nissan NV 3500?
  I have a great alternative for your crossbar setup. Unfortunately, the Rhino-Rack Roof Rack for Thule and Yakima Tracks # Y01-140B-NT is not confirmed to fit your 2015 Nissan NV 3500. However, we do carry a similar heavy duty bar setup by Rhino-Rack that does fit your 2015 Nissan NV 3500. For this setup, I recommend the following parts: - Rhino-Rack Heavy-Duty Roof Rack Crossbars # RB1375B-2 - Rhino-Rack 2500 Series Legs for Heavy-Duty Crossbars # RRRLKHD - Custom DK Fit Kit for 4 Rhino-Rack...
  view full answer...
  
• What is the Weight Rating of the Rhino-Rack Gutter Mount Roof Rack on a 2022 Jeep Wrangler Unlimited
  The weight rating for the gutter mount system from Rhino-Rack is really 88 lbs for your 2022 Jeep Wrangler Unlimited with the hard top. Since there are many other options out there with a higher rating I recommend going a different direction. For your application I recommend the Rhino-Rack Backbone roof rack system which consists of the following: 59" HD Crossbars - # RB1500B-2 Quick Mount Legs - # RRRLT600 Backbone System - # RRRJLB1 Rubber Bases - # RRQMFK06 Spacer Blocks - # RRQMHD05-2 This...
  view full answer...
  
• Weight Rating for the Rhino-Rack Gutter Mount Roof Rack on a 2022 Jeep Wrangler Unlimited
  You are correct, the Rhino-Rack SG Roof Rack for Rain Gutters with Vortex Aero Crossbars, # RRSG59 that you linked to is 88 lbs. But don't worry, we have other options. I suggest you consider the Rhino-Rack Backbone roof rack system that starts with the, Backbone System, # RRRJLB1 using Rubber Bases, # RRQMFK06, Spacer Blocks, # RRQMHD05-2 and Quick Mount Legs, # RRRLT600 along with 59" HD Crossbars, # RB1500B-2. This will provide you a heavier rating of 175 lbs. however, please check...
  view full answer...
  
• What Backbone System Works w/ a 2023 Jeep Wrangler 4xe?
  There are tons of options for Jeep's so I would be happy to point you in the right direction. The correct back bone system with a pioneer platform for your 2023 Jeep Wrangler 4xe hard top is the item # JB0893 you were looking at. The Rhino-Rack Pioneer Platform Rack with Backbone Mounting System item # JB0893 measures 72" long x 56" wide. It has a 264 lbs capacity and weighs 94 lbs. If you are wanting a back bone system that mounts traditional crossbars you will need the following...
  view full answer...
• Comparison of Rhino-Rack Heavy-Duty and Rhino-Rack Vortex Aero Roof Racks
  The Rhino-Rack Heavy-Duty Roof Rack Roof Rack have specific C-channels that are designed to fit specific Rhino-Rack Heavy-Duty accessories, like the Rhino-Rack Hi-Lift Jack and Shovel-Holder Brackets # RRRCB-RSHB-RJHB as an example. That's the purpose of the name, and the advantage of the rack. This rack is made up of the following parts: Rhino-Rack Heavy-Duty Roof Rack Crossbars: # RB1375 Qty 2 Rhino-Rack Quick Mount Legs: # RRRLT600 Qty 4 Roof Rack Leg Spacer Blocks: # RRQMHD05-2 Qty...
  view full answer...
• Will Rhino-Rack Roof Rack Fit 2006 Jeep Wrangler Rubicon
  The Rhino-Rack Roof Rack Legs # RL150S2 are designed to fit factory rain gutters on certain models of the Jeep Cherokee and Liberty. Unfortunately, there is not a rain gutter mount for your Rubicon. If you want to add the Rhino-Rack square bars shown with these legs to your 2006 Jeep Wrangler Rubicon you will need the following: -Rhino-Rack Heavy-Duty Roof Rack Crossbars # RB1500B-2 -Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars # RRRLT600 -Rhino-Rack RT-Style Roof Rack Tracks...
  view full answer...
• Will a Paddleboard Fit a Rhino-Rack Roof Rack on a 2015 Jeep Wrangler with a Hard Top
  Rhino-Rack SG Roof Rack # RRSG60 for rain gutters has a capacity of 88 pounds so provided that your 11 foot paddleboard is under 88 pounds then it can support the board. However, this roof rack has a narrow bar spread of 19 inches from the center of one bar to the center of the other bar meaning you would need to make certain that the board is tied down at the bow and stern and placed so that the weight is evenly distributed to both bars. Also since the crossbars are basically positioned...
  view full answer...
• Can Tracks of Rhino-Rack # Y02-490B Be Cut To Desired Length?
  The Rhino-Rack Roof Rack System w/ 2 Vortex Aero Crossbars - Track Mount - Black - 54" Long # Y02-480B can in theory be used on your 2010 Jeep JKU Wrangler hard top but it is not a confirmed fit. The tracks can be cut to your desired length. Because this system is not a confirmed fit, the rated capacity will most likely be more similar to the 99 lbs of the similar Rhino-Rack Track fit confirmed for your vehicle. That rack consists of # RB1500B-2, # RRRLT600, # RTC12JWMY11,and # RRQMHD05-2.
  view full answer...
• What Heavy-Duty Crossbar Setup do You Recommend for My 2018 Jeep Wrangler Unlimited with Hard Top?
  For mounting a heavy duty crossbar setup on your 2018 Jeep Wrangler Unlimited JK, I recommend the following components: - Rhino-Rack Heavy-Duty Roof Rack Crossbars - Black - 59" # RB1500B-2 - Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars - RTC and RT Roof Rack Tracks # RRRLT600 - Rhino-Rack Backbone Roof Rack Mounting System # RRRJLB1 - Rubber Bases for Rhino-Rack RRRLT600 Quick Mount Legs # RRQMFK06 - Roof Rack Leg Spacer Blocks for Rhino-Rack Heavy-Duty Crossbars - 5 mm Thick...
  view full answer...
• What Parts Do I Need To Install Rhino-Rack Roof Rack On 2020 Mercedes Benz Sprinter 2500 High Roof?
  Since your 2020 Mercedes-Benz Sprinter 2500 High Roof has factory roof rails running front to back then you can go with the Rhino-Rack Vortex Aero Crossbars or the Rhino-Rack Heavy Duty Square Bars. For the aero bars you need Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 71" Long # RRVA180B-2, Legs # RRRLT600, and Nuts # RRQMFK11-2. For the heavy duty square bars you need Rhino-Rack Heavy-Duty Roof Rack Crossbars - Silver - 71" Long # RB1800, Legs # RRRLT600, Nuts # RRQMFK11-2,...
  view full answer...
• Can I Upgrade To 71" Rhino-Rack Heavy Duty Crossbars Instead Of 59" Crossbars On 2012 Jeep Wrangler?
  For your 2012 Jeep Wrangler Unlimited with hard top, Rhino-Rack recommends using Rhino-Rack Heavy-Duty Roof Rack Crossbars - Black - 59" # RB1500B-2 along with Legs # RRRLT600, Backbone Mounting System # RRRJKB1, and Leg Spacers # RRQMHD05-2. While Rhino-Rack does not suggest using the 71" Heavy-Duty Crossbars # RB1800B-2 that you were looking at, you can certainly use them as long as they are not longer than the widest point of your vehicle which is usually the mirrors. My research tells...
  view full answer...
• Recommended Rhino-Rack Roof Rack For a 2017 Mercedes-Benz Sprinter 2500 With Factory Side Rails
  For your 2017 Mercedes-Benz Sprinter 2500 with the factory rails I recommend the Rhino-Rack Heavy-Duty Roof Rack Crossbars # RB1800B-2 with Rhino-Rack Quick Mount Legs # RRRLT600, Quick Mount Nuts # RRQMFK11-2 and Roof Rack Leg Spacer Blocks # RRQMHD05-2. You will need to replace the channel nuts that come on the legs for the larger M6 30 mm x 25 mm x 5 mm Zinc Nuts # RR96TB. The Rhino-Rack Roof Rack for Thule and Yakima Tracks # Y01-140B-NT only uses 65" long crossbars and the only recommended...
  view full answer...
• Front & Back Hitches With Accessories For Ultimate Mercedez-Benz Sprinter Van 3500
  The Swagman Skaha 2 Plus Bike Rack with Cargo Carrier # S69SR is definitely the move for you, but if you plan on putting it in the front of your 2017 Mercedes-Benz Sprinter 3500, you'll need a front hitch # 306-X7352. For the back if you have a factory step bumper you'll need this hitch # 75601 and if you have a Standard bumper you'll need this one # 75549. In order to use the Yakima EXO Swing Away Enclosed Cargo Carrier # Y62VR you'll need a class III hitch or higher. If you wanted to...
  view full answer...
• Lockable Roof Rack and Snowboard Carrier for 2016 Jeep Wrangler Unlimited
  The Rhino-Rack Roof Rack # RRSG59 mentioned in your question for your 2016 Jeep Wrangler Unlimited is not compatible with any key lock system. However, they do have built-in security hardware because the legs can only be loosened by the special tool that comes with the roof rack. This roof rack has a weight capacity of 88 pounds, though you will want to check your vehicle owner's manual for its roof weight capacity. If you would like a roof rack that can be locked to your Jeep with a...
  view full answer...
• Recommended Roof Rack Compatible with 2007 Jeep Wrangler JK with Hard Top
  The # Y02-490B is not a fit for your Jeep. Instead you will want the following for the similar system: Rhino-Rack Heavy-Duty Roof Rack Crossbars - Black - 59" Long # RB1500B-2 Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars # RRRLT600 Rhino-Rack RTC-Style Roof Rack Tracks # RTC12JWMY11 Roof Rack Leg Spacer Blocks for Rhino-Rack Heavy-Duty Crossbars # RRQMHD05-2 An alternative option to consider is the Rhino-Rack SG Roof Rack for Rain Gutters - Vortex Aero Crossbars - Aluminum -...
  view full answer...
• Is Drilling Required to Install Rhino-Rack Roof Rack on 2015 Ford Transit Connect Long Wheelbase
  I'm not 100 percent certain what you mean by "threaded sleeves" but if your have a 2015 Ford Transit Connect with a long wheelbase, you will need to drill holes in your roof in order to attach the Rhino-Rack RT-Style Roof Rack Tracks # RRRTS547, which is what you will mount the rest of the roof rack system to; there are no threaded holes with which to install this rack. Once the tracks are in place you will complete the installation by adding the Roof Rack Leg Spacer Blocks # RRQMHD05-2,...
  view full answer...
  

Do you have a question about this Roof Rack?