Inno Truck Bed Bike Racks
- INRT201
- Frame Mount
- Compact Trucks
- Full Size Trucks
- Mid Size Trucks
- 1 Bike
- Inno
- Clamp-On
- 15mm Thru-Axle
- 20mm Thru-Axle
- 9mm Axle
- Locks Not Included
Space-saving carrier lets you transport 1 bike in your truck bed. Adjustable, ratcheting straps hold your bike firmly by the fork and seat stay. Clamp-on installation onto truck bed side rails. Built-in D-rings provide cable lock tie-down points.
Features:
- Space-saving carrier lets you transport 1 bike in your truck bed with standard side rails
- Ratcheting straps with adjustable rods hold your bike firmly by its fork and seat stay
- No front wheel removal necessary
- Built-in D-rings provide tie-down points for a cable lock
- Easy, clamp-on installation to truck bed side rails
- Hardware included
- No drilling required
- Steel clamps with silver powder coat are strong, durable, and rust resistant
Specs:
- Application: truck beds with standard side rails
- Weight capacity: 33 lbs
- Clamp dimensions: 2-13/16" long x 1-5/8" wide
- Length of rods: 6-3/8"
- Length of ratcheting straps: 8-3/4"
- D-ring weight capacity: 66 lbs
- Limited lifetime warranty
![Inno Velo Gripper Truck Bed]()
The space-saving Velo Gripper bike carrier lets you transport 1 bike in your truck bed. Because your bike sits along the side of your truck bed, you'll have plenty of room for everything else you need to haul. This carrier mounts easily onto the side rail of your truck bed, and ratcheting straps hold a bike of any shape or size by the seat stay and fork. Built-in D-rings act as tie-down spots so that you can secure your bike with a cable lock or secure other cargo with a bungee cord or tie-down strap.
Hassle-Free Bike Mounting
![Inno Bike Mounting]()
Two ratcheting straps on adjustable rods hold one bike of any shape or size by the fork and seat stay - no need to remove your front wheel to mount your bike. The rods rotate so the holders can grab your bike from any angle. Rotating the rods also allows you to adjust the amount of space between your bike frame and the side of your truck bed. That way, you can position your bike close enough to the side of your truck bed to save space but not so close that your bike and truck bed make contact.
Simple Truck-Bed Installation
![Inno Bike Mounting]()
The Velo Gripper installs without drilling onto your truck bed. To install, place the included protective plates on top of your truck bed rail to prevent the mounting brackets from scuffing or scratching the paint. Then, position the mounting brackets over the protective plates. Tighten the clamps down with the eye bolts to complete installation.
Space-Saving Design
![Inno Space Saving]()
Your bike will rest on both wheels in its normal upright position on the inside of your truck bed. This mounting style leaves most of your truck bed open to carry other gear. You can position your bike at the front or the rear of your truck bed to help reduce the potential for the bike to roll. This not only reduces pressure on the Velo Gripper but also saves space in your truck bed.
D-Ring Attachments
![Inno D Ring]()
Each clamp has an attached D-ring that enables you to use tie-down straps with or without your bike mounted. Loop a a cable lock with a maximum diameter of 3/4" (sold separately) through the D-rings or the eye bolts and through your bike frame to lock the carrier to your truck and your bike to the carrier. A 5' - 6' long cable is recommended for locking your bike and both clamps. When you're not transporting a bike, these D-rings make great tie-down spots for securing other gear in your truck.
RT201 Velo Gripper Clamp-On Truck Bed Bike Carrier for Standard Bed Rails
Installation Details 
This Product Fits The Following Vehicles
Robert
7/29/2023
Still working well, weve had no issues on multiple long distance trips.