See what our Experts say about this Rhino Rack Roof Rack

• Does Rhino-Rack HD Roof Rack for 2020 Toyota Corolla Sedan Have Static Load Rating
  I checked with Rhino-Rack and they specifically mention they only have dynamic (moving) load ratings, and that is exactly what the 165 lb capacity is with the rack that fits your 2020 Toyota Corolla sedan. Rooftop tents generally only call for a rack to have a certain dynamic capacity so I recommend checking out your tent's manual to find out. As for the roof rack for your 2020 Toyota Corolla, here are the parts you need: - Rhino-Rack Heavy-Duty Roof Rack Crossbars # # RB1250B-2 (Black)...
  view full answer...
  
• Dimensions of Rhino-Rack Heavy-Duty Roof Rack Crossbars
  The Rhino-Rack Heavy-Duty 50-Inch Roof Rack Crossbar # RB1250S has cross-section dimensions of 1-7/8-inches tall and 1-5/8-inches wide, as shown in the photo I prepared for you. We also offer two bars as a set # RB1250. The vehicle known as the Mitsubishi Pajero in other countries is called the Montero in the North American market. If you happen to have a 2006 model year with factory installed roof rails that run front-to-back this crossbar can be installed using leg kit part # CXB.
  view full answer...
  
• Can I Carry Two Kayaks Side by Side on My Roof Rack?
  The roof rack you're asking about is a Rhino-Rack System with parts # RB1250, # RRRLKHD, # DK376 which has 50" long crossbars. As for if you can carry two kayaks lying down side by side, it's unlikely, but depends on your kayaks. Kayak widths can range from 22" to 30". If you have saddle-style kayak carriers like the Malone SaddleUp Pro # MPG110MD and your kayaks are less than 24" in width, then you can set them up side by side. If your kayaks are too wide though, you can get two J-style...
  view full answer...
• Can I Use The Batwing Awning # RR33200 With My Factory Crossbars?
  The Rhino Rack Batwing Awning # RR33200 is a bolt on installation so it won't be able to work with your factory crossbars. You'll need to add another roof rack system with tracks to be able to use the batwing awning. You can use something like these legs # CXB and these bars # RB1250. These have a channel which will work with the hardware on the Batwing. You will need this mounting kit # RR31102. I personally have not used the XTM 270 Batwing Awning before. So I think that the batwing...
  view full answer...
• Sturdy Roof Rack Recommendation for 2008 Chevy Cobalt
  For a vehicle like your 2008 Chevy Cobalt I would not want to recommend a track style of rack as the best option. The tracks aren't going to flex enough to fit well and the clamp style racks are much sturdier than one might think so even though that's not the option you listed wanting it would be your overall best option still. Rhino Rack does offer a heavy duty roof rack that fits your vehicle with the # RB1250, # RRRLKHD, and # DK181 if you have a sedan or part # DK182 for a coupe but...
  view full answer...
• Is Rhino-Rack 2500-Series Roof Rack Compatible with Thule Force Cargo Box # TH624
  The Rhino-Rack 2500-Series roof racks can include either square Euro crossbars, their Vortex Aero bars or their heavy-duty rectangular bars. The Euro square bars and the Vortex Aero bars both are fully compatible with the Thule Force XT Cargo Box # TH6356B. The heavy-duty cross bars # RB1250 are not. The Thule Force XT requires that the spread between the crossbars be at least 23-5/8-inches. As long as the rack has this minimum spread and uses one of the two compatible bar types it will...
  view full answer...
• Crossbar Pads to Carry a Surf Board on Rhino-Rack Heavy Duty Crossbars
  Yes, we do have foam pads that will fit around your Rhino-Rack Heavy-Duty Roof Rack Crossbars # RB1250 and allow you to carry your surf board. You can use the Rhino-Rack Crossbar Pads w/ Tie-Downs # RRRWP04. These pads will fit your HD crossbars. I have included a picture from the instructions manual that shows this as a fit.
  view full answer...
  
• 2017 Hyundai Tucson Heavy Duty Roof Rack Recommendation
  Thank you for all of the info! I definitely have a roof rack solution so you can carry some ladders with your 2017 Hyundai Tucson but at this time (February 2022) Rhino-Rack doesn't have a roof rack fitment for your Tucson so we won't be able to install a roof rack using the Rhino-Rack Heavy-Duty Roof Rack Crossbars # RB1250. As an alternative option I recommend going with the Yakima HD Crossbar roof rack system. The crossbars won't increase the weight capacity of the roof rack since your...
  view full answer...
• Weight Capacity Of The Rhino Rack RLTF Roof Rack System.
  If you used these # RLTF feet with the tracks # RRRTV188 and use the Heavy Duty Crossbars # RB1250 you will have 220 lbs of capacity on your roof. This is a bit more than the average roof rack system so you will be able to really fill up your bar space! You should verify that the vehicle's roof can handl that weight too though.
  view full answer...
• How Do Roof Racks Attach to a 2012 Hyundai Elantra
  Rhino-Rack 2500 Series Leg Kit # RRRLKHD is just the legs but for them to actually fit your 2012 Hyundai Elantra you need the proper clamp kit. If you have a 4-door sedan with no rails or crossbars already on the roof you would use clamp kit # DK301 and bars # RB1250. If you have a Touring model with no rails or crossbars you would use clamp kit # DK010 and bars # RB1250. Clamp kits have what is basically a hook that attaches to the roof right above the doors in the door jamb. If you...
  view full answer...
• How to Determine if Rhino-Rack CXB Leg Kit Fits a 2022 Subaru Forester for HD Bars & Roof Top Tent
  The Rhino-Rack CXB Leg Kit for Raised, Factory Roof Rack Side Rails # CXB will fit the factory rails on your 2022 Subaru Forester as long as those rails are not more than 1-1/2" tall and not more than 2-1/4" wide. This would allow you to use Rhino Rack HD cross bars like the Rhino-Rack Heavy-Duty Roof Rack Crossbars # RB1250. It is also important to note that since these use the Rhino Rack HD bars, you may have a difficult time finding a rooftop tent that fits. That is because the HD bars...
  view full answer...
• Will the Inno Shadow 16 Fit on Rhino-Rack Crossbars on My 2013 Toyota Prius?
  As far as the fitment of the Inno Shadow 16 Cargo Box # INBRA1210BK being able to clamp around a Rhino-Rack roof rack, it depends on what type of Rhino-Rack crossbars you have on your 2013 Toyota Prius. If you have an aero crossbar system that involves the Rhino-Rack Vortex crossbars like the ROC25 # RR44SR, the Shadow 16 will clamp around those as well. The only caution is that the Shadow 16 will not fit Rhino-Rack Heavy Duty Crossbars like the # RB1250. I am happy to say that all 4...
  view full answer...
  
• What are the Dimensions of the Hi-Lift Jack Mounting Brackets # RJHB
  I went out to the warehouse and found that the internal dimension of the Hi-Lift Jack Mounting Brackets # RJHB would allow a post that is about 1" thick and about 2-3/4" high. These come with T-bolts that let you mount them on Rhino-Rack Heavy-Duty roof-rack crossbars like part # RB1250.
  view full answer...
  
• Heavy Duty Roof Rack Recommendation for 2013 Hyundai Sonata
  For stuff like lumber from a home center type store I would recommend the Rhino Rack HD roof rack part numbers # RB1250, # RRRLKHD, and # DK250 as it is confirmed as a fit and has large square bars that are great for what you are looking for. For load stops you would then want the pat # RRRLH1. Then for cinch straps part # RRRTD35P. This rack has a capacity of 110 lbs but you would also need to check the roof capacity of your vehicle in the owners manual.
  view full answer...
• Will the 65" Rhino-Rack HD Crossbars # RB1650 Fit on My 2010 Mazda 3 Hatchback?
  I have an answer for you. Unfortunately, the 65 inch Rhino-Rack Heavy-Duty Roof Rack Crossbars # RB1650 are too long for your 2010 Mazda 3 Hatchback with fixed mounting points. With that being said, you can still have shorter Rhino-Rack Heavy-Duty crossbars on your vehicle. Our installation team here at etrailer has tested these shorter bars with your vehicle so that they will fall within the required dimensions of local traffic laws. For this system, you will need the following parts:...
  view full answer...
• Roof Rack Recommendation to Carry 2 Kayaks on 2014 Toyota Prius C and 2010 Toyota Prius
  There is a Rhino Rack roof rack that will fit both vehicles if you switch out the Custom DK Clamps and Pads. For the 2010 Toyota Prius, you will want the following parts: Crossbars # RB1250 Leg Kit # RRRLKHD Custom DK Clamps and Pads # DK195 For your 2014 Toyota Prius C you will want to add Custom DK Clamps and Pads # DK351. Before you attempt to carry 2 kayaks on the roof of your Prius you will need to consult your owner's manual to determine if you have the carrying capacity for...
  view full answer...
• Leg Spacers for the Rhino-Rack RCH Legs
  If you're looking for the leg spacers to mount Heavy-Duty crossbars to your RCH Legs, part # RRRCH6, then the correct part number for those are # RRQMHD05. With these, you'll be able to mount Rhino-Rack HD Bars, part # RB1250. This may seem confusing at first because the fit-guide states that these are not compatible with your 2007 Lexus GX 470. However, in this particular (and very rare) case, the specific vehicle does not matter because these are attaching to the legs. In other words,...
  view full answer...
• Will the Rhino-Rack RTC-Style Roof Rack Tracks # RTC95JW Fit a 1998 Jeep Wrangler with Hardtop
  The 37-1/2" long Rhino-Rack RTC-Style Roof Rack Tracks # RTC95JW are a universal fit so as long as your 1998 Jeep Wrangler Sahara has a naked roof that is flat then they will fit. The tracks provide mounting points for the Rhino-Rack # RLTP, # RLTF, and # RLT500 track-mounted legs. These are compatible with the Heavy-Duty Rhino-Rack Bars like the 50" long # RB1250.
  view full answer...
• Will the Rhino-Rack HD Crossbars Allow Me to Transport 2 Kayaks on My 2014 Kia Sorrento LX?
  Yes, the Rhino-Rack Heavy-Duty Roof Rack Crossbars - Black - 50" Long - Qty 2 # RB1250B-2 (black) and # RB1250 (silver) are compatible with the bare roof on your 2014 Kia Sorrento LX without a vista roof. For a complete roof rack system, you will need the following parts: - Rhino-Rack 2500 Series Legs for Heavy-Duty Crossbars - Naked Roofs or Fixed Mounting Points - Qty 4 # RRRLKHD - Custom DK Fit Kit for 4 Rhino-Rack 2500 Series Roof Rack Legs - Naked Roof # DK179 For a J-style carrier...
  view full answer...
• Parts Needed to Move Rhino-Rack 2500 Series Roof Rack to 2014 Toyota Prius C
  A vehicle-specific portion of the Rhino-Rack roof racks for your 2014 Toyota Prius C is the Custom DK Clamps and Pad kit # DK351 that you referenced and this kit is used for a number of their 2500-series racks. You may also need a leg kit; which one will depend on the crossbars you have (the 2500 series includes several types). If you have the heavy-duty crossbar # RB1250 you will use leg kit # RRRLKHD; if you have Aero crossbars you'll instead use # RRRLKVA. The link provided will show...
  view full answer...
• Rhino-Rack Heavy Duty Roof Rack for 2018 Volkswagen Passat
  The Rhino-Rack # Y01-140B-NT is designed to fit roof mounted tracks such as what would be found on a camper shell, it's not typically used on a vehicle roof. You can install a similar rack using the following parts: • Rhino-Rack Heavy Duty 50 inch crossbars, part # RB1250B-2 for black or # RB1250 for silver • Series 2500 Legs, part # RRRLKHD • Vehicle-Specific fit clips, part # DK323 This rack has a 165 lb capacity and is custom designed to fit your vehicle.
  view full answer...
• Recommendations for Rhino-Rack HD Roof Rack on a 2013 Volkswagen Jetta Sedan
  I am happy to help you find a roof rack for your 2013 Volkswagen Jetta Sedan. For naked roofs, the roof rack will mount to the door frame of your vehicle using a custom fit hook. The Rhino-Rack HD # RB1650 does not have a confirmed fit custom mount for your Jetta, but the # RB1250 does. You will need the legs # RRRLKHD and custom fit kit # DK055 to complete your roof rack system. Check out the video below for a detailed explanation on how these racks are installed and why the custom...
  view full answer...
• Availability of Rhino-Rack Heavy Duty Roof Rack Option for 1997 Nissan Pathfinder w/ Roof Tracks
  We do indeed have a system that would work on your Pathfinder. In order to use the Rhino Rack Heavy Duty 50 inch long crossbars on your 1997 Pathfinder, you would use the leg system Rhino Rack specifically designed for the recessed roof tracks, part # RLTFMV. The rack has a 220 lb capacity, which could be limited by the roof's actual capacity if it's lower than that of the rack.
  view full answer...
• Which Rhino Rack Pioneer Platform Can Attach to Vortex Aero Crossbars
  I have a solution for you, but the Rhino Rack Pioneer Platform # RR25TB is designed to mount directly to either a Rhino Rack fit kit or Rhino Rack HD bars so you'll need a Pioneer platform that mounts to crossbars. There are 2 different sizes of the Pioneer platform that can be attached to Rhino Rack Vortex Aero bars: - Rhino-Rack Universal Pioneer Platform Rack for Crossbars - Aluminum - 48" Long x 38" Wide # RR42114BF - Rhino-Rack Universal Pioneer Platform Rack for Crossbars - Aluminum...
  view full answer...
• What Roof Rack Do You Recommend for a Camper Shell with Tracks?
  For a great roof rack system for your A.R.E. Mx truck cap, I recommend the Rhino-Rack Roof Rack for Factory Tracks - 59" # Y02-490B-NT. The Rhino-Rack Roof Rack includes 2 Vortex Aero black, elliptical crossbars that you can use to hold ladder racks, conduit cases, and other work accessories. In addition, the Rhino-Rack Roof Rack crossbars come with a 220 pound weight capacity. I recommend checking the user's manual on your camper shell to make sure it can accommodate that much weight. If...
  view full answer...
  
• Will the Rhino-Rack RLTP Legs Fit on My Retrax XR Cover on My 2018 Ford F-150?
  I have a great solution for a rack that works with the rails on your Retrax XR tonneau cover on your 2018 Ford F-150. Unfortunately, the Track Mount RLTP Legs for Rhino-Rack RTC- and RT-Style Roof Rack Tracks - 2" Tall # RLTP-2 will not fit the Retrax XR rails. However, Rhino-Rack does make legs that are designed to fit the Retrax XR rails. Those are the Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars - RTC and RT Roof Rack Tracks # RRRLT600. Sadly, with these legs, you will not...
  view full answer...
• Can I Fit A Rhino Rack Pioneer Platform To My Retrax XR Series Tonneau Cover
  You have two options; The first option is to install the Rhino-Rack Vortex Crossbar System for Retrax XR Series Tonneau Covers - Black - 65" Long, part # RRVA165B and part # RRRLT600. The feet attach directly to the RetraxPrO XR Hard Tonneau Cover - Retractable - Aluminum - Matte Black - Accessory T-Slots, part # RTT-80852. The Vortex Aero crossbars will attach to the the legs. With this fit you will be limited to Rhino-Rack Universal Pioneer Platform Rack for Crossbars - Aluminum - 48"...
  view full answer...
• How to Use Yakima Round Crossbars with a Set of Rhino-Rack RTC-Style Roof Rack Tracks
  There are adapters for the Rhino-Rack Quick Mount Legs part # RRRLT600 that will allow you to use square crossbars but not round crossbars. If you can tell me what you are trying to do or what you have/need I would be happy to see if we have any other options for you.
  view full answer...
• Roof Rack or Ladder Rack for Trailer For Roof Top Tent
  There are a couple options to add a rack system to your trailer, depending on what type of trailer you have. For an enclosed trailer with rain gutters you can install the Rack'em Fitz-All Enclosed Trailer Ladder Rack # RA-28. Another option is to use a track-mounted system from Rhino-Rack. You will need the Rhino-Rack RT-Style Roof Rack Tracks - Rivet Mount - 50" Long # RRRTV128, Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars - RTC and RT Roof Rack Tracks # RRRLT600 and crossbars,...
  view full answer...
• Parts Needed To Mount A Rhino-Rack Platform To The Roof Of A Ford E-350
  Hey William, What is the year of your Ford E-350? There might be a naked roof fit kit that can fit. If not you would need to go with the Rhino-Rack RTC-Style Roof Rack Tracks - 55" Long # RTC14 and rivet it to the roof. If needed you can cut the length down from the side without the opening in the channel for accessories to better fit your roof. From there you can then install the Rhino-Rack Quick Mount Legs # RRRLT600 and some spacers blocks # RRQMHD05 to connect the platform directly...
  view full answer...
• What Adapter Will Fit My Retrax Tonneau Cover to Let Me Use the Yakima OverHaul HD on My 2019 Tacoma
  If you have a Retrax tonneau cover on your 2019 Toyota Tacoma (5-ft. bed) like the RetraxONE XR # RTT-60851 or the RetraxPRO XR # RTT-80851, the adapter that you need to use the Yamkima OverHaul HD # Y01151-58 is the Tonneau Cover Adapter Kit for Yakima OverHaul HD # Y01155. As far as mounting a Rhino-Rack pioneer platform on the OverHaul HD, the only platforms that will fit are the Rhino-Rack Universal Pioneer Platform Rack part # RR42114BF which is 48" long x 38" wide and part # RR42115BF...
  view full answer...
• Roof Rack For A 2004 Acura TSX
  Hi Manny! We do have a couple options for custom fit roof racks that will fit your 2004 Acura TSX, but Rhino Rack does not have one available, unfortunately. That doesn't mean you are completely out of luck, but you would need to install a Rhino Rack set up a different way. I have the parts needed to do this listed below: Rhino-Rack RTC-Style Roof Rack Tracks - Channel Mount - 55" Long - Qty 2 # RTC14 Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars - RTC and RT Roof Rack Tracks...
  view full answer...
• Can the Pioneer Platform Rack Fit the Rebel Off Road Xplor Rack?
  Hey Dave, thanks for reaching out! Your best bet is going to be a combination of the Rhino-Rack Quick Mount Legs # RRRLT600. These mount directly to the Pioneer Platform Rack and then mount to a track system using the T-Bolts that are spaced 2-5/8" apart on center (see attached). I reached out to Rebel Off Road and they suggested checking out their Tent Standoff Brackets and/or their Cross Bar Mounting System, but none of this has been tested together so I can't confirm any of this will...
  view full answer...
• Availability of Rhino-Rack Crossbars for BAKFlip MX4 With Rails on 2023 Chevy Colorado
  Hey Dustin! It is possible to add a Rhino-Rack crossbars to the BAKFlip MX4 Hard Tonneau Cover # BAK83AV. The Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars # RRRLT600 will fit in the tracks on the rails and then you can choose your crossbars. A ladder rack like the Yakima OutPost HD # Y01152-5855 uses 68" crossbars which are a pretty good fit on the Colorado. You might be able to use 65" bars like # RR85AG but I think the 71" Rhino-Rack Sportz Aero # RR25AG would be the best fit....
  view full answer...
• Best Way To Carry Cargo on a 2016 Honda Odyssey
  I would love to help but none of the roof bags for a bare roof will work with a sliding rear door. Therefore, the Rightline Gear Sport 3 Rooftop Cargo Bag part # RL100S30 will not fit your 2016 Honda Odyssey unless you first install a roof rack like the Rhino-Rack Vortex Aero Crossbar System which consists of part # RRVA126B-2, part # RRQMVA10, part # RRRTV168, and part # RRRLT600. The next best option which is also more cost effective would be to install a trailer hitch like the etrailer.com...
  view full answer...
• Can Rhino Rack Sportz Aero Crossbars be Used in ARE Cap Channels
  Hey Ken, yes you can use the Rhino Rack crossbar set part # RR25AG in the tracks of your ARE cap with the feet kit part # RRRLT600 and you'd be set. What are you planning on carrying with the rack?
  view full answer...
• Recommended Truck Bed Crossbar Kit for a 2024 GMC Sierra 1500
  Tony, the only way I understand you'd be able to use your Rhino-Rack bars # RR63ZE with your 2024 GMC Sierra is by installing a tonneau cover with T-slots so you can then use the Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars # RRRLT600. If you didn't want to also install a tonneau cover, then your only other option would be a new system in which you could use the Yakima BedRock HD Truck Bed Rack # Y01160-59, which would not require a tonneau cover, simply just clamps onto your...
  view full answer...
• Length of Rhino-Rack RT-Style Roof Rack Tracks RRRTS547 on 2017 Toyota Tacoma Double Cab
  The tracks included in the Rhino-Rack RT-Style Roof Rack kit # RRRTS547 (same as RTS547) are each 47" inches long. These are not the crossbars but the rivet-mount tracks that mount permanently to a vehicle or camper shell roof to allow installation of track-mount legs such as # RRRLT600. These legs in turn accept crossbars like # RRVA150B-2 which are 59-inches long; other lengths are available. It sounds like you may prefer a custom-fit cab roof rack rather than a general-purpose track-based...
  view full answer...
• Will Rhino-Rack Pioneer Platform Fit Westin EXP Truck Topper on 2019 Chevy Colorado
  Hey Ash! It is possible to add a Rhino-Rack Pioneer Platform to the Westin EXP Truck Topper # W76PT. The topper is 75.6" long and 63.3" wide. The distance between the mounting rails is 38.78" and the rails are 54" long. The Rhino-Rack Quick Mount Legs # RRRLT600 will fit the rails and are compatible with the Pioneer Platform. These can slide along the crossmember to match the width of the rails on the topper for installation. For the platform I recommend using the # RR59AP which is 75"...
  view full answer...
• Roof Kayak Carrier Recommendation for a 2014 Honda Odyssey EX-L with Moon Roof
  Foam block carriers such as Malone Deluxe Kayak Carrier - Foam Block Style Item # MPG152 are designed as a temporary, short-distance solution to carry a kayak. On a van that has sliding side doors they wouldn't work because on a naked roof it would require running straps through the interior of the vehicle. You would instead need a roof rack for your van. I can make some recommendations if you can tell me the year, make, and model of the van.
  view full answer...
• Recommended Crossbars and Feet for a LEER Camper Shell with Thule Tracks
  Ok Sean, so I was able to track down some info about your LEER camper shell and it looks like you ordered it with the Thule tracks already installed. So, if that's the case, you can then use either the Thule Tracker II feet with the Thule WingBar Crossbars # TH711520, or you can use the Rhino-Rack Vortex Aero Crossbars # RRVA165B-2 with the Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars # RRRLT600 for a more cost-effective non-Thule setup.
  view full answer...
• Will the Heavy Duty Rhino-Rack Roof Rack Fit a 2015 Nissan NV 3500?
  I have a great alternative for your crossbar setup. Unfortunately, the Rhino-Rack Roof Rack for Thule and Yakima Tracks # Y01-140B-NT is not confirmed to fit your 2015 Nissan NV 3500. However, we do carry a similar heavy duty bar setup by Rhino-Rack that does fit your 2015 Nissan NV 3500. For this setup, I recommend the following parts: - Rhino-Rack Heavy-Duty Roof Rack Crossbars # RB1375B-2 - Rhino-Rack 2500 Series Legs for Heavy-Duty Crossbars # RRRLKHD - Custom DK Fit Kit for 4 Rhino-Rack...
  view full answer...
  
• Will 65" Rhino-Rack Crossbars Fit RetraxPRO XR Tonneau Cover T-Slots On A Ford F-150
  Hey Zach, Rhino-Rack crossbars have an 11-3/4" mounting track on the both sides of the bottom of the crossbar. At 65" this would mean that the spacing of the t-slots in your cover would need to sit roughly 55" to 64" apart in order to fit. To mount the 65" crossbars # RRVA165B-2 in the track you'll need their quick-mount legs # RRRLT600.
  view full answer...
  
• What Mounting System Do I Need to Use for the Pioneer Platform # RR42108BF on My Leer 100XR Shell?
  I have a great platform solution for you. Unfortunately, the Rhino-Rack Pioneer Platform 72" Long x 56" Wide RR42108BF is discontinued. However, with the recommended fit of the Rhino-Rack Pioneer Platform Rack for Short Camper Shells - Backbone - 60" Long x 56" Wide # RR63ZW, you will have both the platform and the mounting hardware available for installation with the modular Backbone. The Modular Backbone is designed to fit the track on the 100XR.
  view full answer...
• Rhino-Rack Roof Rack for Truck Cap Track System
  For your truck topper with existing track system, I recommend the Track Mount RLTP Legs for Rhino-Rack RTC- and RT-Style Roof Rack Tracks - 2" Tall - Qty 2 # RLTP along with the Rhino-Rack Heavy-Duty Roof Rack Crossbars - Black - 65" Long # RB1650B-2. If you prefer the vortex style bars then use Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars - RTC and RT Roof Rack Tracks - Qty 4 # RRRLT600 and # RRVA165B-2.
  view full answer...
• What Feet and Rhino Rack Sportz Bars do I Need for My 2023 F-150 With Retrax Tonneau Cover?
  Hello Raymond, Thanks so much for laying all of that out. That definitely helps make sure we get you the right setup. For your Retrax EQ with T-slots, the Rhino-Rack Quick Mount Legs # RRRLT600 are designed to slide directly into those integrated tracks. Because of that, you will not need the adapter kit # RRT-FK1 or the rubber bases # RRQMFK06 for this application. Those parts are intended for surface-mounted track systems, and your Retrax already has the built-in channel system. The...
  view full answer...
• Will 59" Crossbars Work on a 2003 Chevrolet TrailBlazer EXT?
  Yes, they will Justin. The 59" Rhino-Rack Vortex Aero Crossbars item # RRVA150B-2 will attach to the roof of your 2003 Chevrolet TrailBlazer EXT using the Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars item # RRRLT600. You are correct they are going to over hang quite a bit. The 46" Long Rhino-Rack Vortex Aero Crossbar item # RRVA118B are what's recommended for your Trailblazer. The Yakima ForkLift Roof Mounted Bike Carrier item # Y02098 will definitely work with Rhino-Rack crossbars....
  view full answer...
• Parts Needed To Mount A Rhino-Rack Platform To The Roof Of A Ford E-350
  Hey William, What is the year of your Ford E-350? There might be a naked roof fit kit that can fit. If not you would need to go with the Rhino-Rack RTC-Style Roof Rack Tracks - 55" Long # RTC14 and rivet it to the roof. If needed you can cut the length down from the side without the opening in the channel for accessories to better fit your roof. From there you can then install the Rhino-Rack Quick Mount Legs # RRRLT600 and some spacers blocks # RRQMHD05 to connect the platform directly...
  view full answer...
• Is it Possible to Have a Single Crossbar on my Camper with Tracks and a Crossbar Mounted on My Cab?
  For having one 65-inch Rhino-Rack heavy Duty Crossbar on your camper shell's factory tracks and having one mounted on the cab of your 2018 Ford F-150, you need the following parts: For the single HD crossbar on the shell: - 65" Rhino-Rack Heavy-Duty Roof Rack Crossbars part # RB1650B-2 - Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars - RTC and RT Roof Rack Tracks - Qty 2 # RRRLT600H - Roof Rack Leg Spacer Blocks for Rhino-Rack Heavy-Duty Crossbars part # RRQMHD05 For the single...
  view full answer...
• How to Carry Three Kayaks on the Roof of a 2018 Chevrolet Equinox
  In order to fit three kayaks on the roof of your 2018 Chevrolet Equinox, you will first need a roof rack. In order to recommend one I would need to know if you have a bare roof with fixed mounting points or factory raised side rails. If you have the bare roof with fixed mounting points then I recommend the Rhino-Rack Vortex Aero Crossbar System which is composed of crossbars part # RRVA118B-2, mounting feet part # RRRCL4 , and fit kit part # RRRCP62-BK. If you have factory raised side...
  view full answer...
• Rhino-Rack Pioneer Platform Rack for a 2009 Lexus GX 470
  The 60" x 49" Rhino-Rack Pioneer Platform Rack # RR35TB requires specific fit kits and is only compatible with certain vehicles. We do have a Pioneer platform rack that will fit the factory crossbars on your 2009 Lexus GX 470 but unfortunately this is not the correct part number. Instead you need to use the 58" x 47" Rhino-Rack Pioneer Platform Rack # RR42115BF which is a universal fit that is compatible with round, square, elliptical, and most factory crossbars. This rack features mounting...
  view full answer...
• Compatibility of Rhino Rack Antenna Mount with Jeep E Group Package
  The Custom RCP Fit Kit for 4 Rhino-Rack RC and RV Series Roof Rack Legs - Fixed Mounting Points # RRRCP27-BK is a confirmed fit for your 2012 Jeep Grand Cherokee with E Group package. This is designed to fit Rhino-Rack RCL Legs # RRRCL4 or half set # RRRCL2. and then use # RRVA126B-2 or # RRVA126B. The Antenna Mounting Bracket # RR43196 is intended for use on the channel of the crossbars or platforms but could be mounted to one of the RCL legs with some basic hardware adjustments. It...
  view full answer...
• Parts Needed for Single 54" Rhino-Rack HD Crossbar for Track Mounting
  Hey Brian, thanks for reaching out! It sounds like you're needing the 54" Rhino-Rack Heavy-Duty Roof Rack Crossbar # RB1375B, the Quick Mount Legs # RRRLT600H, and the Leg Spacer Blocks # RRQMHD05. This gets you the 54" Rhino-Rack HD crossbar with the parts needed to secure it to the tracks that install on a roof. Let me know if you're needing anything else!
  view full answer...
• Will Yakima HD Crossbars Work With Rhino-Rack Mounting Legs RRRLT600
  The Yakima HD Crossbars won't work with Rhino-Rack Mounting Legs part # RRRLT600 but they do offer the very similar Rhino-Rack Heavy-Duty Roof Rack Crossbars part # RB1650B-2 which will work if used with the Roof Rack Leg Spacer Blocks part # RRQMHD05.
  view full answer...
• Rhino-Rack Crossbars For a Roll-N-Lock Cover On a 2022 Jeep Gladiator
  The legs of the Rhino-Rack Roof Rack for Thule and Yakima Tracks # Y01-140B-NT will fit the t-tracks of your Roll-N-Lock XT cover. We have had customers in the past use this in that fashion. The issues would come from the length of the crossbars. We have not fit the Rhino-Rack Roof Rack for Thule and Yakima Tracks # Y01-140B-NT (65" crossbars) on a Jeep Gladiator, they are typically more for full size trucks. However, we have fit the Rhino-Rack Heavy-Duty Roof Rack Crossbars # RB1500B-2...
  view full answer...
  
• Rhino Rack Tower and Crossbar Compatibility with Thule Factory Installed Tracks on Truck Cap
  Yes. The Thule tracks will accept the Rhino-Rack feet and crossbars. The kits like the Rhino-Rack Roof Rack for Factory Tracks - 2 Vortex Aero Crossbars - Black - 54" Long # Y02-480B-NT will work well, or you can piece together the parts you desire. The really nice aspect of Rhino-Rack towers is they come with the included locks and are great quality at a really good price point. To piece together your kit, you will use the Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars - RTC...
  view full answer...
  
• How Can I Attach A Pioneer Platform To My 2021 Ram 2500 With A Retrax Pro Tonneau Cover
  I can definitely get you pointed in the right direction, but without knowing the specific Pioneer Platform you recently purchased, there will be a few different ways you will have to install the platform to your Retrax Pro. I did speak with a Rhino-Rack representative, so I will be covering all of the installation options. If you do not have a universal fit Pioneer Platform, you can have one of two platform series, the 4200 or the 5200. If your Pioneer Platform does not have a ruler...
  view full answer...
• How to Mount a Rhino-Rack Pioneer Platform Rack to Roof Tracks
  In order to mount the Rhino-Rack Pioneer Platform Rack part # RR42101BF on your SnugTop Camper Shell with Rhino Rack Tracks you will need two of the Roof Rack Leg Spacers part # RRQMHD05 and one of the Rhino-Rack Quick Mount Legs part # RRRLT600. That will be all you need. The legs also come with keys for security. I was able to confirm the above with Rhino Rack.
  view full answer...
• Parts Needed to Install Rhino Rack Pioneer Platform on Vehicle with Roof Tracks
  If you were looking for a 6 pack of feet that can attach to the Rhino Rack Pioneer Platform part # RR45TB you'd want the # RRRCL6 and then 3 sets of the spacer kit part # RRQMHD05 for a way to attach the setup to roof tracks or "channels" like it sounds like you are looking to do. The parts you mentioned are not going to work ideally which is why I would not recommend them for you.
  view full answer...
• Mounting Rhino-Rack Pioneer Platform 52113F to 2022 Ford F-150 Raptor With PowertraxPRO XR Tonneau
  Hey John! Rhino-Rack used to have a version of the Pioneer Platform with a universal mount but it is no longer around and neither are those clamps. However, you can still add crossbars and install the platform on your PowertraxPRO XR # RTX32SR. You will need the Rhino-Rack Quick Mount Legs # RRRLT600, Rhino-Rack Heavy-Duty Roof Rack Crossbars # RB1500B-2, and the Roof Rack Leg Spacer Blocks # RRQMHD05. Then you will need the Pioneer Platform Mounting Kit for Rhino-Rack Heavy-Duty Crossbars...
  view full answer...
• How To Level Rhino-Rack Heavy Duty Crossbars For Rooftop Tent
  If the tent is not level on your roof rack then your only solution is to install leg spacers to the side that is lower so that you tent will have a more leveled mounting surface. You can go with Roof Rack Leg Spacer Blocks for Rhino-Rack Heavy-Duty Crossbars - 5 mm Thick - Qty 2 # RRQMHD05 which comes with two 5mm spacers, or 1/5". Or you can go with the larger Roof Rack Leg Spacer Blocks for Rhino-Rack Heavy-Duty Crossbars - 20 mm Thick - Qty 2 # RRQMHD20 with are two 20mm spacers, or...
  view full answer...
• How To Use Rhino-Rack Heavy Duty Crossbars On a Pace Edwards Tonneau Cover with Thule/Yakima Tracks
  Yes, you can use a Rhino-Rack Roof Rack with the Thule/Yakima tracks on the Pace Edwards Metal Ultragroove Retractable Tonneau Cover. I have listed the parts you need below: Rhino-Rack Quick Mount Legs part # RRRLT600 Adapter Kit for Rhino-Rack RTL600 Legs part # RRT-FK3 (Yakima) part # RRT-FK1 (Thule) Rhino-Rack Heavy-Duty Roof Rack Crossbars part # RB1800B-2 Roof Rack Leg Spacer Blocks for Rhino-Rack Heavy-Duty Crossbars part # RRQMHD05 (2).
  view full answer...
• Rhino Rack Pioneer Platform that Fits 2018 Jeep Wrangler Unlimited
  The mounting kit needed to fit a Rhino Rack Pioneer Platform to the roof of a 2018 Jeep Wrangler Unlimited is the part # RRRJLB1 which you could potentially be used with the smaller Pioneer Platform # JA8688 but you are going to end up having to get the # RRQMHD05, the leg kit # RRRLT600 and the # RRRLT600H. I'd go with the larger # JB0893 though as it will fit and is the most cost effective solution. The picture I attached shows what the # JB0893 looks like installed.
  view full answer...
  
• How To Use 71" Heavy Duty Rhino-Rack Crossbars on Tonneau Cover Tracks
  In order to use the 71" Rhino-Rack Heavy-Duty Roof Rack Crossbars part # RB1800B-2 with the channel mounting system on your tonneau cover you'll need the following: Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars part # RRRLT600 Roof Rack Leg Spacer Blocks for Rhino-Rack Heavy-Duty Crossbars part # RRQMHD05 Adapter Kit for Rhino-Rack RTL600 Legs part # RRT-FK1
  view full answer...
• Installing Rhino Rack Pioneer Platform on Travel Trailer
  Since your 2020 No Boundaries 16.2 travel trailer came with Rhino Rack roof channels the parts you'd need to install a larger Rhino Rack Pioneer Platform tray are # RR42113BF, # RRQMHD05 (3 sets), and # RRRCL6 and you'd be set.
  view full answer...
• Recommended Rhino-Rack Pioneer Platform Compatible with Yakima Tracks on 2017 GMC Canyon 5 ft Topper
  The Rhino-Rack Pioneer Platform # RR42115BF is one of the correct size for your 5 foot bed and topper. The platform will attach to your Yakima Aero bars without any problem. I reached out to my contact at Rhino Rack and you can absolutely install a platform directly to your tracks using Rhino-Rack Pioneer Platform Rack - 60" Long x 49" Wide # RR35TB, Legs # RRRLT600, 2 sets of spacer blocks # RRQMHD05, and adapter kit # RRT-FK3. This will be a clean look.
  view full answer...
• Parts Needed To Install Rhino-Rack Pioneer Platform Roof Tray on a Truck Bed Camper
  In order to install a Rhino-Rack Pioneer Platform Roof Tray on a truck bed camper you will need the following: Rhino-Rack Pioneer Platform Roof Tray part # RR42109BF Rhino-Rack Quick Mount Legs part # RRRLT600 Roof Rack Leg Spacer Blocks part # RRQMHD05 (2) Rhino-Rack RT-Style Roof Rack Tracks part # RTC14 Unfortunately, there is no Backbone Mounting System for a truck bed camper. The reason for this is that you will be limited in regards to weight by that of the camper and there is no...
  view full answer...
• Can 71" Rhino Rack Heavy Duty Crossbars Be Used with Thule or Yakima Tracks
  Yes, the Rhino-Rack Heavy-Duty Roof Rack Crossbars are offered in lengths up to 71" using part # RB1800B-2. In order to use these with Yakima or Thule tracks you'll also need the Rhino-Rack Quick Mount Legs part # RRRLT600, Roof Rack Leg Spacer Blocks part # RRQMHD05, and the Adapter Kit for Rhino-Rack RTL600 Legs part # RRT-FK3. In regards to the Rhino-Rack Roof Rack for Thule and Yakima Tracks part # Y01-140B-NT, the max length is 65" so if you need longer you'll need to piece together...
  view full answer...
• Leg Spacers for the Rhino-Rack RCH Legs
  If you're looking for the leg spacers to mount Heavy-Duty crossbars to your RCH Legs, part # RRRCH6, then the correct part number for those are # RRQMHD05. With these, you'll be able to mount Rhino-Rack HD Bars, part # RB1250. This may seem confusing at first because the fit-guide states that these are not compatible with your 2007 Lexus GX 470. However, in this particular (and very rare) case, the specific vehicle does not matter because these are attaching to the legs. In other words,...
  view full answer...
• Parts Needed to Add Single Rhino-Rack HD Roof Rack to 2006 GMC Sierra to Match Camper Shell Rack
  We can get your 2006 GMC Sierra extended cab set up with the matching 65 inch HD crossbar that come with the # Y01-140B system for your camper shell. To make it work the parts will need to be pieced out, but by adding each of them it will allow you to add the track-mounted rack system for your camper shell and a single-bar rack with a matching HD crossbar. The exact parts you will need to make this work for your '06 Sierra are the following: - Rhino-Rack Heavy-Duty Roof Rack Crossbars...
  view full answer...
• Availability of Longer Rhino-Rack Crossbars to Work with RT-Style Roof Rack Tracks
  The Rhino-Rack RT-Style Roof Rack Tracks # RRRTV148 that you referenced are compatible with a few different style mounting legs. For example, you can use the Track Mount RTC Legs # RRRLT600 with either the aero bars or the Rhino-Rack Heavy-Duty square bars using spacer # RRQMHD05. The aero-style bars from Rhino-Rack are available in lengths of up to 79 inches like with the Aluminum Aero Crossbar # RRVA200S. The Yakima towers will not be compatible with the Rhino-Rack tracks, but if...
  view full answer...
• Parts Needed To Mount A Rhino-Rack Platform To The Roof Of A Ford E-350
  Hey William, What is the year of your Ford E-350? There might be a naked roof fit kit that can fit. If not you would need to go with the Rhino-Rack RTC-Style Roof Rack Tracks - 55" Long # RTC14 and rivet it to the roof. If needed you can cut the length down from the side without the opening in the channel for accessories to better fit your roof. From there you can then install the Rhino-Rack Quick Mount Legs # RRRLT600 and some spacers blocks # RRQMHD05 to connect the platform directly...
  view full answer...
• Is it Possible to Have a Single Crossbar on my Camper with Tracks and a Crossbar Mounted on My Cab?
  For having one 65-inch Rhino-Rack heavy Duty Crossbar on your camper shell's factory tracks and having one mounted on the cab of your 2018 Ford F-150, you need the following parts: For the single HD crossbar on the shell: - 65" Rhino-Rack Heavy-Duty Roof Rack Crossbars part # RB1650B-2 - Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars - RTC and RT Roof Rack Tracks - Qty 2 # RRRLT600H - Roof Rack Leg Spacer Blocks for Rhino-Rack Heavy-Duty Crossbars part # RRQMHD05 For the single...
  view full answer...
• How to Carry Three Kayaks on the Roof of a 2018 Chevrolet Equinox
  In order to fit three kayaks on the roof of your 2018 Chevrolet Equinox, you will first need a roof rack. In order to recommend one I would need to know if you have a bare roof with fixed mounting points or factory raised side rails. If you have the bare roof with fixed mounting points then I recommend the Rhino-Rack Vortex Aero Crossbar System which is composed of crossbars part # RRVA118B-2, mounting feet part # RRRCL4 , and fit kit part # RRRCP62-BK. If you have factory raised side...
  view full answer...
• Rhino-Rack Pioneer Platform Rack for a 2009 Lexus GX 470
  The 60" x 49" Rhino-Rack Pioneer Platform Rack # RR35TB requires specific fit kits and is only compatible with certain vehicles. We do have a Pioneer platform rack that will fit the factory crossbars on your 2009 Lexus GX 470 but unfortunately this is not the correct part number. Instead you need to use the 58" x 47" Rhino-Rack Pioneer Platform Rack # RR42115BF which is a universal fit that is compatible with round, square, elliptical, and most factory crossbars. This rack features mounting...
  view full answer...
• Compatibility of Rhino Rack Antenna Mount with Jeep E Group Package
  The Custom RCP Fit Kit for 4 Rhino-Rack RC and RV Series Roof Rack Legs - Fixed Mounting Points # RRRCP27-BK is a confirmed fit for your 2012 Jeep Grand Cherokee with E Group package. This is designed to fit Rhino-Rack RCL Legs # RRRCL4 or half set # RRRCL2. and then use # RRVA126B-2 or # RRVA126B. The Antenna Mounting Bracket # RR43196 is intended for use on the channel of the crossbars or platforms but could be mounted to one of the RCL legs with some basic hardware adjustments. It...
  view full answer...
• Parts Needed for Single 54" Rhino-Rack HD Crossbar for Track Mounting
  Hey Brian, thanks for reaching out! It sounds like you're needing the 54" Rhino-Rack Heavy-Duty Roof Rack Crossbar # RB1375B, the Quick Mount Legs # RRRLT600H, and the Leg Spacer Blocks # RRQMHD05. This gets you the 54" Rhino-Rack HD crossbar with the parts needed to secure it to the tracks that install on a roof. Let me know if you're needing anything else!
  view full answer...
• Will Yakima HD Crossbars Work With Rhino-Rack Mounting Legs RRRLT600
  The Yakima HD Crossbars won't work with Rhino-Rack Mounting Legs part # RRRLT600 but they do offer the very similar Rhino-Rack Heavy-Duty Roof Rack Crossbars part # RB1650B-2 which will work if used with the Roof Rack Leg Spacer Blocks part # RRQMHD05.
  view full answer...
• Rhino-Rack Crossbars For a Roll-N-Lock Cover On a 2022 Jeep Gladiator
  The legs of the Rhino-Rack Roof Rack for Thule and Yakima Tracks # Y01-140B-NT will fit the t-tracks of your Roll-N-Lock XT cover. We have had customers in the past use this in that fashion. The issues would come from the length of the crossbars. We have not fit the Rhino-Rack Roof Rack for Thule and Yakima Tracks # Y01-140B-NT (65" crossbars) on a Jeep Gladiator, they are typically more for full size trucks. However, we have fit the Rhino-Rack Heavy-Duty Roof Rack Crossbars # RB1500B-2...
  view full answer...
  
• Rhino Rack Tower and Crossbar Compatibility with Thule Factory Installed Tracks on Truck Cap
  Yes. The Thule tracks will accept the Rhino-Rack feet and crossbars. The kits like the Rhino-Rack Roof Rack for Factory Tracks - 2 Vortex Aero Crossbars - Black - 54" Long # Y02-480B-NT will work well, or you can piece together the parts you desire. The really nice aspect of Rhino-Rack towers is they come with the included locks and are great quality at a really good price point. To piece together your kit, you will use the Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars - RTC...
  view full answer...
  
• How Can I Attach A Pioneer Platform To My 2021 Ram 2500 With A Retrax Pro Tonneau Cover
  I can definitely get you pointed in the right direction, but without knowing the specific Pioneer Platform you recently purchased, there will be a few different ways you will have to install the platform to your Retrax Pro. I did speak with a Rhino-Rack representative, so I will be covering all of the installation options. If you do not have a universal fit Pioneer Platform, you can have one of two platform series, the 4200 or the 5200. If your Pioneer Platform does not have a ruler...
  view full answer...
• How to Mount a Rhino-Rack Pioneer Platform Rack to Roof Tracks
  In order to mount the Rhino-Rack Pioneer Platform Rack part # RR42101BF on your SnugTop Camper Shell with Rhino Rack Tracks you will need two of the Roof Rack Leg Spacers part # RRQMHD05 and one of the Rhino-Rack Quick Mount Legs part # RRRLT600. That will be all you need. The legs also come with keys for security. I was able to confirm the above with Rhino Rack.
  view full answer...
• Parts Needed to Install Rhino Rack Pioneer Platform on Vehicle with Roof Tracks
  If you were looking for a 6 pack of feet that can attach to the Rhino Rack Pioneer Platform part # RR45TB you'd want the # RRRCL6 and then 3 sets of the spacer kit part # RRQMHD05 for a way to attach the setup to roof tracks or "channels" like it sounds like you are looking to do. The parts you mentioned are not going to work ideally which is why I would not recommend them for you.
  view full answer...
• Mounting Rhino-Rack Pioneer Platform 52113F to 2022 Ford F-150 Raptor With PowertraxPRO XR Tonneau
  Hey John! Rhino-Rack used to have a version of the Pioneer Platform with a universal mount but it is no longer around and neither are those clamps. However, you can still add crossbars and install the platform on your PowertraxPRO XR # RTX32SR. You will need the Rhino-Rack Quick Mount Legs # RRRLT600, Rhino-Rack Heavy-Duty Roof Rack Crossbars # RB1500B-2, and the Roof Rack Leg Spacer Blocks # RRQMHD05. Then you will need the Pioneer Platform Mounting Kit for Rhino-Rack Heavy-Duty Crossbars...
  view full answer...
• How To Level Rhino-Rack Heavy Duty Crossbars For Rooftop Tent
  If the tent is not level on your roof rack then your only solution is to install leg spacers to the side that is lower so that you tent will have a more leveled mounting surface. You can go with Roof Rack Leg Spacer Blocks for Rhino-Rack Heavy-Duty Crossbars - 5 mm Thick - Qty 2 # RRQMHD05 which comes with two 5mm spacers, or 1/5". Or you can go with the larger Roof Rack Leg Spacer Blocks for Rhino-Rack Heavy-Duty Crossbars - 20 mm Thick - Qty 2 # RRQMHD20 with are two 20mm spacers, or...
  view full answer...
• How To Use Rhino-Rack Heavy Duty Crossbars On a Pace Edwards Tonneau Cover with Thule/Yakima Tracks
  Yes, you can use a Rhino-Rack Roof Rack with the Thule/Yakima tracks on the Pace Edwards Metal Ultragroove Retractable Tonneau Cover. I have listed the parts you need below: Rhino-Rack Quick Mount Legs part # RRRLT600 Adapter Kit for Rhino-Rack RTL600 Legs part # RRT-FK3 (Yakima) part # RRT-FK1 (Thule) Rhino-Rack Heavy-Duty Roof Rack Crossbars part # RB1800B-2 Roof Rack Leg Spacer Blocks for Rhino-Rack Heavy-Duty Crossbars part # RRQMHD05 (2).
  view full answer...
• Rhino Rack Pioneer Platform that Fits 2018 Jeep Wrangler Unlimited
  The mounting kit needed to fit a Rhino Rack Pioneer Platform to the roof of a 2018 Jeep Wrangler Unlimited is the part # RRRJLB1 which you could potentially be used with the smaller Pioneer Platform # JA8688 but you are going to end up having to get the # RRQMHD05, the leg kit # RRRLT600 and the # RRRLT600H. I'd go with the larger # JB0893 though as it will fit and is the most cost effective solution. The picture I attached shows what the # JB0893 looks like installed.
  view full answer...
  
• How To Use 71" Heavy Duty Rhino-Rack Crossbars on Tonneau Cover Tracks
  In order to use the 71" Rhino-Rack Heavy-Duty Roof Rack Crossbars part # RB1800B-2 with the channel mounting system on your tonneau cover you'll need the following: Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars part # RRRLT600 Roof Rack Leg Spacer Blocks for Rhino-Rack Heavy-Duty Crossbars part # RRQMHD05 Adapter Kit for Rhino-Rack RTL600 Legs part # RRT-FK1
  view full answer...
• Installing Rhino Rack Pioneer Platform on Travel Trailer
  Since your 2020 No Boundaries 16.2 travel trailer came with Rhino Rack roof channels the parts you'd need to install a larger Rhino Rack Pioneer Platform tray are # RR42113BF, # RRQMHD05 (3 sets), and # RRRCL6 and you'd be set.
  view full answer...
• Recommended Rhino-Rack Pioneer Platform Compatible with Yakima Tracks on 2017 GMC Canyon 5 ft Topper
  The Rhino-Rack Pioneer Platform # RR42115BF is one of the correct size for your 5 foot bed and topper. The platform will attach to your Yakima Aero bars without any problem. I reached out to my contact at Rhino Rack and you can absolutely install a platform directly to your tracks using Rhino-Rack Pioneer Platform Rack - 60" Long x 49" Wide # RR35TB, Legs # RRRLT600, 2 sets of spacer blocks # RRQMHD05, and adapter kit # RRT-FK3. This will be a clean look.
  view full answer...
• Parts Needed To Install Rhino-Rack Pioneer Platform Roof Tray on a Truck Bed Camper
  In order to install a Rhino-Rack Pioneer Platform Roof Tray on a truck bed camper you will need the following: Rhino-Rack Pioneer Platform Roof Tray part # RR42109BF Rhino-Rack Quick Mount Legs part # RRRLT600 Roof Rack Leg Spacer Blocks part # RRQMHD05 (2) Rhino-Rack RT-Style Roof Rack Tracks part # RTC14 Unfortunately, there is no Backbone Mounting System for a truck bed camper. The reason for this is that you will be limited in regards to weight by that of the camper and there is no...
  view full answer...
• Can 71" Rhino Rack Heavy Duty Crossbars Be Used with Thule or Yakima Tracks
  Yes, the Rhino-Rack Heavy-Duty Roof Rack Crossbars are offered in lengths up to 71" using part # RB1800B-2. In order to use these with Yakima or Thule tracks you'll also need the Rhino-Rack Quick Mount Legs part # RRRLT600, Roof Rack Leg Spacer Blocks part # RRQMHD05, and the Adapter Kit for Rhino-Rack RTL600 Legs part # RRT-FK3. In regards to the Rhino-Rack Roof Rack for Thule and Yakima Tracks part # Y01-140B-NT, the max length is 65" so if you need longer you'll need to piece together...
  view full answer...
• Leg Spacers for the Rhino-Rack RCH Legs
  If you're looking for the leg spacers to mount Heavy-Duty crossbars to your RCH Legs, part # RRRCH6, then the correct part number for those are # RRQMHD05. With these, you'll be able to mount Rhino-Rack HD Bars, part # RB1250. This may seem confusing at first because the fit-guide states that these are not compatible with your 2007 Lexus GX 470. However, in this particular (and very rare) case, the specific vehicle does not matter because these are attaching to the legs. In other words,...
  view full answer...
• Parts Needed to Add Single Rhino-Rack HD Roof Rack to 2006 GMC Sierra to Match Camper Shell Rack
  We can get your 2006 GMC Sierra extended cab set up with the matching 65 inch HD crossbar that come with the # Y01-140B system for your camper shell. To make it work the parts will need to be pieced out, but by adding each of them it will allow you to add the track-mounted rack system for your camper shell and a single-bar rack with a matching HD crossbar. The exact parts you will need to make this work for your '06 Sierra are the following: - Rhino-Rack Heavy-Duty Roof Rack Crossbars...
  view full answer...
• Availability of Longer Rhino-Rack Crossbars to Work with RT-Style Roof Rack Tracks
  The Rhino-Rack RT-Style Roof Rack Tracks # RRRTV148 that you referenced are compatible with a few different style mounting legs. For example, you can use the Track Mount RTC Legs # RRRLT600 with either the aero bars or the Rhino-Rack Heavy-Duty square bars using spacer # RRQMHD05. The aero-style bars from Rhino-Rack are available in lengths of up to 79 inches like with the Aluminum Aero Crossbar # RRVA200S. The Yakima towers will not be compatible with the Rhino-Rack tracks, but if...
  view full answer...

Do you have a question about this Roof Rack?