How To Use 71" Heavy Duty Rhino-Rack Crossbars on Tonneau Cover Tracks

Question

Question:

Looking for the Rhino Rack 71inch black heavy duty that fits the T rail system I have a full size chevy truck with Roll N Lock tonneau

asked by: Mark

0

Expert Reply:

In order to use the 71" Rhino-Rack Heavy-Duty Roof Rack Crossbars part # RB1800B-2 with the channel mounting system on your tonneau cover you'll need the following:

Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars part # RRRLT600
Roof Rack Leg Spacer Blocks for Rhino-Rack Heavy-Duty Crossbars part # RRQMHD05
Adapter Kit for Rhino-Rack RTL600 Legs part # RRT-FK1

expert reply by: Conner L

0

Answer 1

The Rhino-Rack Heavy-Duty Roof Rack Roof Rack have specific C-channels that are designed to fit specific Rhino-Rack Heavy-Duty accessories, like the Rhino-Rack Hi-Lift Jack and Shovel-Holder Brackets #RRRCB-RSHB-RJHB as an example. That's the…

view full answer...

Answer 2

The Rhino-Rack RTC-Style Roof Rack Tracks - Channel Mount like #RTC16 will work with the Thule Tracker II feet. The Rhino-Rack Tracks are the same size as the Thule tracks.

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

Hello again Monty; I would get the black SumoSprings Custom Helper Springs #SS66PV. These have a capacity of 1,800 lbs so it gives you a bit over the blue without overdoing it. SumoSprings are a great choice if you don't want to go with the air…

view full answer...

Answer 6

Hello Barry, Since you already have a weight distribution (WD) hitch and are only experiencing a little rear sag, I recommend going with SumoSprings. I typically only suggest Timbrens for those who are towing heavy loads regularly, as they can create…

view full answer...

Answer 7

Hey Scott, congrats on the new truck. I checked with Timbren's website and they do not go into specifics on how many spacers or what size you're going to need. The instructions for the Timbren Suspension Enhancement System item #T45MR say to…

view full answer...

Answer 8

Hey Eric, the K-Source Tow Mirrors part #KS48NQ that you referenced will fit your 2025 Toyota Tundra Platinum as long as it doesn't have extendable or telescoping mirrors. What are you towing?

view full answer...

Answer 9

Hey Chad, Good question and you will need spacers for your 2024 Toyota Tundra with the factory lift when installing the Air Lift LoadLifter 5000 Ultimate Air Helper Springs with Internal Jounce Bumpers #AL24JQ. The rear lift on the Tundra is 2 inches…

view full answer...

Answer 10

I checked with Timbren, and the overall height (from the top of the bracket that bolts to the frame to the bottom of the spring) is 6 inches for the Timbren Suspension Enhancement System #T45MR.

view full answer...

Answer 11

Hello David, thanks for reaching out. Between the TImbrens and the SumoSprings for your 2024 Toyota Tundra I definitely recommend the Sumos. They have a progressive spring rate so you don't get as rough of a ride when you are unloaded. Since your…

view full answer...

Answer 12

Hey David, I would test fit everything and see which orientation works best. With the spacer or without. Ideally when the kit is installed there will be 1 inch of space between the Timbren and the frame so whichever orientation gets closest to that…

view full answer...

How To Use 71" Heavy Duty Rhino-Rack Crossbars on Tonneau Cover Tracks

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching