Will Yakima T-Bolts Fit in Rhino Rack Roof Rack Crossbar Channels

Question

Question:

I recently purchased the Rhino-Rack Roof Rack System w/ 2 Vortex Aero Crossbars - Track Mount for my Tacoma. I’m looking for t-bolts to mount and secure my arb awning. Will the Yakima t-bolts work on my rhino roof rack vortex aero crossbar?

asked by: David

0

Expert Reply:

Yes, the track/channel dimensions between the Rhino Rack and Yakima roof racks are the same dimensions so the Yakima T-bolts part # Y8880184 that you referenced will fit and work well.

expert reply by: Jameson C

0

Answer 1

Hello Justin, The channel nut is 35mm long x 19mm wide x 8mm tall in the Pioneer Platform Mounting Kit for Rhino-Rack Heavy-Duty Crossbars #RR43105.

view full answer...

Answer 2

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 3

The 60" Yakima HD Crossbars #Y01157 are going to be 60" from end to end including the caps. As you need 60" of T-slot you would need to step up to the 68" Crossbars #Y01158.

view full answer...

Answer 4

Yes, the TrackTowers for Yakima Crossbars and Platforms #Y52AV that you referenced do fit the Rhino-Rack RTC-Style Roof Rack Tracks #RTC18.

view full answer...

Answer 5

Yes, the TrackTowers part #Y52AV does fit into Yakima HD tracks like what you have installed on your trailer.

view full answer...

Answer 6

The thickness of the T-bolt head of the part #Y8880184 you referenced is 5/32 of an inch. I attached a picture that has all of the other dimensions as well. These T-bolts are M10 x 1.5 x 25

view full answer...

Answer 7

The Yakima HD Crossbars #Y01159 have a 3/8" opening on the top of the bar which is 1/4" tall and 13/16" wide inside the slot opening. This will accept both the Replacement T-Bolt with Nut for Yakima Rack and Roll Trailers #Y8880184 and…

view full answer...

Answer 8

We can get what you need depending on exactly what you're doing the Thule Xadapt12 part #THXADAPT12 could work. It uses barrel nuts that thread down on the bolts for security. You can use the Replacement M8 T-Bolt part #853-0782 this will allow…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Will Yakima T-Bolts Fit in Rhino Rack Roof Rack Crossbar Channels

Product Page this Question was Asked From

Continue Researching