Product Experts Available Now!
Call 1-800-940-8924
Replacement Foot Pad for Stromberg Carlson Electric Trailer Jacks
(27 reviews)
Price: $20.35
In Stock
Stromberg Carlson
Replacement Foot Pad for Stromberg Carlson Electric Trailer Jacks
Part Number: 2500-3755G
In Stock
$20.35
Retail:$29.20
You Save: 30%
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (27)
- Q & A (0)
- Videos (1)
- Photos
Stromberg Carlson Accessories and Parts - 2500-3755G
- Camper Jacks
- Trailer Jack
- Legs
- Drop Leg
- Stromberg Carlson
- 2 Inch Diameter Tubing
Replaces the foot pad on your Stromberg Carlson electric jack (JET-3500, JET3555, and JET-3755). Cage pin (2500-26) sold separately.
Features:
- Replaces the foot pad on your Stromberg Carlson electric jack
- Round, zinc-plated steel footplate provides stability
- Attaches to outer tube with cage pin (2500-26 - sold separately)
Specs:
- Applications: Stromberg Carlson electric trailer jack - drop leg - A-frame - 18" lift - 3,500 lbs (JET-3500, JET3555, and JET-3755)
- Total travel: 5"
- Overall dimensions:
- Footplate diameter: 5-1/2"
- Height: 7-5/16"
- Distance between pin holes (center to center): 1-7/16"
- Inner tube diameter: 1-1/2"
2500-3755G Replacement Foot Pad for Stromberg Carlson Powered Trailer Jacks
Video of Replacement Foot Pad for Stromberg Carlson Electric Trailer Jacks
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Review of the Replacement Foot Pad for Stromberg Carlson Electric Trailer Jacks
Speaker 1: Today, we're taking a look at the replacement drop leg for Stromberg Carlson electric trailer jacks. This drop leg is a direct replacement for part number JET-3500, JET-3555, and JET-3755. This is a round zinc plated steel footplate that provides stability. Also, that zinc plated finish really helps keep it safe and protected from rust and corrosion. It attaches at the bottom of the trailer jack, and you'd slide it in to the inner tube. Then, line up your pinholes and secure it in place with a pin and clip or a cage pin.Those items are not included.
So if you need a pin and clip or a cage pin, you can check out those options here at etrailer.com. These holes right here, these are your adjustment holes. These are separated apart from one another all in center about an inch and half. The tube diameter is one and three-quarters of an inch. That's the outer edge to outer edge so tube diameter.
Then the footplate diameter, measuring edge to edge that's going to give us a measurement of five and half inches. That's going to do it for today's look at the replacement drop leg for Stromberg Carlson electric trailer jack.
Customer Satisfaction Score:
95% were satisfied with this product
5% of customers were not satisfied
- etrailer mistake
- Wrong item was ordered
Ratings & Reviews
4.7
27 reviews
by:
Matt
08/02/2025
I purchased this after having a very difficult time finding a replacement footpad for my FIC3500 ETJ on my Jayco hybrid. The FIC dealer will not have any in the states for another 3-6weeks and I needed one ASAP. This Stromberg-Carlson replacement was a direct fit. The only difference was the tube length (approximately 4-6in shorter), but this did not matter as it has plenty of drop length to it. This footpad looks and feels more durable than the FIC3500 part as well. Very satisfied with the purchase. Thanks etrailer!
by:
William
05/14/2024
It looks like it would fit on the Weize 3500lb Electric A frame jack but it does not so I need to return it and get a refund please. How do I do that?
by:
James
10/11/2025
Perfect fit, very helpful service.
by:
Bruce
10/21/2019
I was pleased that etrailer had an exact replacement foot for my Stromberg Carlson Trailer jack. Works perfectly Speedy shipping and a fair price made me very happy. Thanks!
by:
Christopher
07/15/2020
My new unit was delivered with out the foot pad. A quick search led me to etrailer.com. I placed my order and it was shipped quickly and correctly. It took seconds to get this installed and set. Thanks for the service!
by:
Keith
10/16/2017
They seem to be very well made. I'm not using them in their originally designed use but for custom made ramp support legs for my trailer, so I can't comment on how well they would work as replacement parts.
by:
John
09/30/2022
Excellent customer and quick shipping. They’re my go to for RV parts.
by:
Jack
02/22/2019
Very happy with my order. The price was right and it was the correct piece I ordered. It was delivered to my front door the day it was suppose to get here.
Very satisfied,
Thank you
Jack
Very satisfied,
Thank you
Jack
by:
Debbie J.
09/08/2017
Very satisfied with the product. Wish the shipping was not so expensive.
by:
Glenn
10/05/2021
Product arrived when was told it would. Fit perfectly like the original and I am totally satisfied. If I need parts, I will go to etrailer.
by:
Jeff
04/17/2021
Awesome delivery exactly what I needed.
Jeff
4/18/2022
Still working like brand new no issues
by:
Phil
10/25/2020
It looks nice and it appears that it will fit. I won't know for a day or two yet when I am able to put it on.
by:
Marvin
10/10/2022
beyond excellent
by:
Daniel
08/06/2026
by:
Donnie
12/23/2025
by:
David
02/19/2026
by:
Eric
11/01/2020
Right part delivered promptly
by:
Matthew
03/23/2026
by:
Jerry
10/03/2025
by:
Ronald
11/24/2025
by:
John
07/24/2026
by:
Becky
10/20/2022
by:
Robbi
04/29/2024
by:
Brandon
12/22/2021
by:
Paul
07/16/2024
25
27
true
Show More Reviews
See what our Experts say about this Stromberg Carlson Accessories and Parts
- Replacement Drop Leg For Jack On A 1967 Airstream TrailerHi Mike, sweet camper! ^___^ I may have an option for you, but the Replacement Foot Pad for Stromberg Carlson Electric Trailer Jacks # 2500-3755G you were looking at has a 1-3/4" outer diameter and will not work for your jack, unfortunately. With that said, check out the Roadmaster Quick Foot Assembly Tongue Jack Extender - 6" Extension - 5,000 lbs # RO84FR. This would actually install over that inner tube (see included image) and would give you up to 6" of additional drop. But, it would...
view full answer... - Replacement Foot for FIC 3500 Power Jack on Keystone Passport TrailerThe outer diameter of this tube is 1-3/4 inches, if that matches the diameter of your old foot, this should work well for you. A snapper pin like # 2500-26 is typically used to hold the foot in place.
view full answer... - Outer Tube Diameter of the Stromberg Carlson Replacement Foot Pad # 2500-3755GThe tube outer diameter for the Replacement Foot Pad # 2500-3755G is 1-3/4". I have attached a photo for you to reference. A review video is also linked where this information is addressed as well.
view full answer...
- Replacement Foot Pad For Stromberg Carlson 2500 Electric Tongue JackYou will need the Replacement Foot Pad # 2500-25 for your Stromberg Carlson Electric A-Frame Tongue Jack # JET-2500. You can see this foot mounts on the outside of the inner tube while the Replacement Foot Pad # 2500-3755G you found fits inside the larger tube on the Jack # JET-3755. We do have the Pin # 2500-26 for this as well. If your concern is with the amount of time waiting on the jack to raise and lower we do have the Stand # A10-0900 which is 8-3/8" tall and will greatly reduce...
view full answer... - Possible Option to Replace FIC Jack FootThe closest thing we have which may work is a jack foot for a Stromberg Carlson jack, and it has a 1-3/4" tube diameter: - Replacement Foot Pad for Stromberg Carlson Electric Trailer Jacks # 2500-3755G This is otherwise similar, with a total height of 7-5/16", a 5-1/2" foot, and a distance between the pin holes of 1-7/16". For a pin you can use the Replacement Cage Pin # 2500-26.
view full answer... - Option for Needing Extension with Stromberg Carlson JackThe best option we have would be something like the Camco Trailer Tongue Jack Stand # CAM44635 or FloTool Wheel Chock and Jack Stand # FT11933MI if you are wanting a way to get more height of your jack since Stromberg does not make an extension foot like you are wanting.
view full answer...
- Replacement Foot Pad for Buyers Products 12V Trailer Jack # 3370093500 I do have a solution for you, however the Replacement Foot Pad # 2500-3755G referenced in your question is designed specifically for certain electric jacks made by Stromberg Carlson so I cannot confirm if it will work well for your existing jack. For your 12V Electric Jack # 3370093500 (part 0093500 from Buyers Products) you will need the Replacement Foot Pad # 3373013261. This will work perfectly for your jack and is exactly what the jack would have originally been equipped with.
view full answer... - Replacement Drop Leg Recommendation for Stromberg Carlson Electric Trailer JackStromberg has a replacement foot pad for their trailer jack part # JET-3555 as part # 2500-3755G but the Bulldog foot you mentioned would not work.
view full answer... - What Replacement Jack Foot and Manual Crank Handle do I Need for My Atwood Electric Jack?For considering a jack foot/sand foot for your Atwood electric jack on your 2013 Trail Manor Elkmont travel trailer, the foot needs to be compatible with the jack's outer diameter. For example, if you have a outer diameter on your jack of 1-3/4 inches, a great option is the Replacement Foot Pad for Stromberg Carlson Electric Trailer Jacks # 2500-3755G. As far as the crank handle, we do need to know the particular model of Atwood jack you own. Also, if you do not know the model you have,...
view full answer... - Replacement Drop Leg/Foot Plate for Stromberg Carlson Powered Jack JET-3555For just the drop leg with the foot for the Stromberg Carlson # JET-3555 you would want the part # 2500-3755G and then if you need the pin you would want the part # 2500-26.
view full answer... - Is The Bottom Leg Of Stromberg Carlson Electric Trailer Jack JET-5000 Available As Replacement Part?If the bottom leg you are referencing on your Stromberg Carlson Electric Trailer Jack # JET-5000 is the foot pad, # 2500-3755G, then we do have a replacement. If the bent leg is the tube that the jack foot goes into, that is not an available replacement part and the entire jack will need to be replaced with another # JET-5000. I included videos of the products mentioned for you to take a look at.
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Jameson C
Written by:
Laura H
Installed by:
Cole B
Updated by:
Hannah L
Updated by:
Mike S
Updated by:
Michael B
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Jenny N.
5/15/2024
I can take care of that for you. Watch your email for return instructions. I checked and I do not have a drop leg that I can for certain will fit with a Weize 3500lb Electric A frame jack.