Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Replaces 1 rear left leg for your Lippert Ground Control 3.0 automatic leveling system (LC358590 or LC675817). Leg includes the mounting bracket needed for installation. Snapper pin to attach footpad (LC225598) is sold separately.
Features:
Specs:
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to be taking a look at Lippert's replacement rear leg for the ground control three leveling system. These are available for either the left or the right for either your four point or six point leveling system. These jacks are going to be a direct replacement for your factory originals. So whether your jacks are worn out and no longer functioning from age, or if you had some sort of collision that's damaged them, these are a nice easy replacement. And you don't have to replace your entire system, just that particular damaged jack.The replacement jack only includes the jack, so you want to make sure that you save all of your mounting hardware to get your new one installed. On the six point replacement jack, the foot pad is made onto the jack.
However on the four point system replacement jack, the foot pad is removable, and the pin that holds it on does not come included. So you want to make sure that you maintained your pin from your original jack. If need be, you can purchase additional replacement pins here at etrailer.com.With these replacement jacks, you can have the comfort of knowing that they are factory original replacements, and they're going to bolt right up guaranteed. Our motor's burnt out on this one here, so we're going to need to replace it. We'll begin the replacement by disconnecting the electrical connectors.
So you're going to want to follow the leads from the motor, pull those down. You'll disconnect them by pressing on the release tab, and pulling them apart.Next you'll simply need to remove all the bolts that are holding it in place. On our particular unit here, we're going to be using a 19 millimeter socket and wrench to remove those. To get to the top ones, I recommend only removing them partially, leaving some of the nuts still threaded on to hold it in place because it is quite heavy.Now we've got them most of the way removed, you can support your jack and remove the rest of the hardware by hand. I like to just leave the bolts in there and just remove those with the jack.
We'll now set it down and get our replacement. An exact replacement for the factory originals, and it installs just in the reverse order of how we removed it. Now when you removed your old one, you want to remember which holes that you used because it does have a height adjustment with these holes. If you're questioning it, you can always take a peak at the other side because the other side is going to have the same distance as this side.With all of our bolts in place, we can tighten them back down using that 19 millimeter socket and wrench. Then torque it to the manufacturer's specifications.
Now we can plug in our electrical connectors. And you're all set, ready to go on your adventures again. And that completes our look at Lippert's replacement rear leg for the ground control three leveling system.
The leveling jack was an exact OEM replacement and arrived in just 3 days after ordering. Packaging was excellent and precluded any damage during shipping. The jack installed very easily (6 bolts and 2 plug-in electrical connections). While the jack operated on startup, I did need to synchronize the leveling jacks by retracting all 4 and then had to recalibrate the leveling system. These are simple operations that are explained on the Ground Control system display panel in the first case, and in You Tube videos in the second case.
Very easy install. User friendly and easy to put together.
Tiffany was very helpful with all my questions. She is a great worker. Appreciated all your help.
Brittany was not only knowledgeable but so pleasant that it was like talking to someone that I’ve known my whole life. Great experience. Love Lake of the Ozarks!!!
Hannah was better than I expected. She got me to the right product quickly. She did a great job job!
Exact replacement. Unplug and unbolt the old one and bolt this one right back on, plug it up and it goes to work. If you have auto level you may have to reset the level point, other than that, it's plug and play.
Paul was outstanding. His clear communication and willingness to help my problem was the reason I purchased from etrailer.
OEM replacement part for my Lippert sys tem.
I had to replace one of these on my camper after a small backing incident that bent the jack housing. I called etrailer and the folks there helped me identify the correct version of the jack and then got it shipped to me quickly. It was direct replacement, so the install was quick and easy. Now I have a spare motor!
Sirs,
I wanted to let you know that I replaced the damaged leveling leg of my trailer with the one I received from you. It took a little work because I ordered the wrong side. After installing and connecting it, I tried performing an automatic leveling. And guess what, it worked perfectly. I did download the procedure to accomplish it.
Thank you very much for your quick delivery and correspondence.
Tony Gutierrez
Bent the original leg on a concrete curb while traveling with our Jayco Pinnacle 5er to Ark. Etrailer promptly delivered the replacement to our favorite RV campground. Easy to put on. Worked right out of box. No error codes, so didn't even have to re-program the Lippert Level Controls. Used a dozen times this last year with no problems.
They work great! They fit perfectly and they both went on easy and fast as our replacements. We were able to auto level within a few min after installing.
Elda 
11/24/2022
Great and still easy to self level our trailer
Mike L.
12/2/2022
This replacement jack was an easy install. My first. Plug and play, if you will. After homing the jacks and running a zero calibration, I was good to go.
Perfect fit and works as it should. Direct replacement for left rear jack for LCI on 2016 Montana high country leveling system 3.0
Thank you for the help
Fast shipping! A perfect replacement. Auto-leveling works again. I did have to use the hardware from the damaged jack, but it worked fine.
Part arrived very fast, even with the pandemic going on! I have ordered from etrailer many times and have been extremely satisfied each time. This is a company you can trust for quality RV parts!
The product appears to be right and showed up very timely. It is missing the pin that holds the foot plate on but I will try to reuse the one off the old unit. I have yet to install it but am assuming at this point (since it is new) that it will work just fine.
The box arrived torn and the UPS driver said it happens all the time. Luckily the parts I need are OK.
I would like to have been reminded that the "snapper pin" is NOT included with this kit.
Otherwise this will correct our situation.
Perfect fit. Plug and play. The best customer service I have ever received. Super fast shipping.
Fast shipping. Parts exactly what we needed. Order woman was extremely patient, helpful and efficient in assisting me in figuring out what parts I needed.
Thanks so much!
perfect replacement to my original jack.
The product worked great out of the box, fast shipping. eTrailer is easy to work with.
big fan of etrailer they always ship faster than expected!
Everything was as expected except the manufacturer did not send the pin to attach the bottom plate. Other than that, it’s perfect. Good customer service and shipped when expected.
Had to replace one. Order came in fast. Plugged it in and worked great
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.
Brooke M.
5/13/2025
Thanks for sharing your experience with install and set up. It's nice to have a real-life perspective and know what to expect and how to do it along with resources if needed. I appreciate that, Keith! Is this a replacement for your RV?