See what our Experts say about this Buyers Products Hitch Fabrication Parts

• Solution for Hitch Plate for 2015 International Prostar
  For your 2015 International Prostar I recommend the Buyers Products Weld-On Pintle Hitch Plate # 3371809027A. The plate dimensions are 25-1/2" tall x 34-1/2" wide x 3/4" thick. It is a fabricators hitch plate so you will need to take it to a certified welder or fabricator for installation. This is the best option since there are no custom fit hitch plates for your truck.
  view full answer...
• Will Buyers Products Hitch Plate Fit 1990 Ford F-Super Duty
  Hi Cody; Buyers Products was unable to confirm if the # 3371809060A could fit your 1990 Ford F-Superduty. What you can do is look at the measurements below to see if they line up with what you have. If not, you could use one of the following universal options: Buyers Products Fabricators Hitch Plate - 3/4" x 34-1/2" x 22-1/2" # 3371809027A Buyers Products Fabricators Hitch Plate - 5/8" x 34-1/2" x 15-1/2" # 3371809042 Buyers Products Fabricators Hitch Plate - 1/2" x 34-5/8" x 15-5/8" #...
  view full answer...
• Is There a Hitch Plate Available For a 2008 Ford F-650?
  While we do not have a custom fit hitch plate for your 2008 Ford F-650 you are able to use one of the universal kits from the list below. I listed the dimensions of the main plate so you can verify which will fit your frame rails best on your F-650. 3/4" Thick x 34-1/2" Wide x 23-1/2" Tall # 3371809027A 1/2" Thick x 34-5/8" Wide x 15-5/8" Tall # 3371809040 5/8" Thick x 34-1/2" Wide x 15-1/2" Tall # 3371809042 5/8" Thick x 34-1/2" Wide x 22-1/2" Tall # 3371809043
  view full answer...
• Heavy Duty Hitch Plate For a 2023 Mack MD7 Truck
  For your 2023 Mack MD7 you will need to use one of the Buyers Products Weld-On Pintle Hitch Plates. You will need to select the best plate for your truck based on the dimensions of the plate below. 34-1/2" Wide x 15-1/2" Tall # 3371809042 34-1/2" Wide x 25-1/2" Tall # 3371809027A 34-5/8" Wide x 15-5/8" Tall # 3371809040 34-1/2" Wide x 22-1/2" Tall # 3371809043
  view full answer...
• Which Pintle Hook is Compatible With the Buyers Products Hitch Plate 3371809027A?
  The Buyers Products Fabricators Hitch Plate # 3371809027A will work with the 40,000 pound Pintle Hook # 33710042. This will be the highest capacity pintle that can be used in unison. Both the # 337PH50 and # 337PH55 have odd bolt hole spacing and will not fit together with the # 3371809027A, unfortunately.
  view full answer...
• What Is The Weight Rating For the Buyers Products Fabricators Hitch Plate # 3371809027A?
  While the Buyers Products Fabricators Hitch Plate # 3371809027A does not carry a weight rating, their custom fit hitch plates are only rated for 20,000lbs. Since this is a fabrication kit you will be able to add more steel and additional mounting points to increase the hitch strength and be able to bolt on the Buyers Products 30 Ton Pintle Hook # 337PH30. I recommend having the plate fabricated and strengthened at a shop experienced in this work.
  view full answer...
• Recommended Hitch Plate for a 1999 International 4700
  I think the best option we have for you is a universal weld-on hitch plate like one of the following that I have attached for you. We do not really have any direct fit hitch plates for you so I think this will be the best option we can offer. If you are not an experienced welder then I recommend taking both the hitch plate and your truck to one for installation. The hitch plates below all come with d-rings for the safety chains as well as gussets for added strength. Buyers Products Fabricators...
  view full answer...
  
• Hitch Plate that Could Fit 2016 International 4300
  While we don't have any custom fit hitch plates that fit your 2016 International 4300 we do have some universal mounts that would potentially work. You'd need to have a qualified welder install the kit. The hitch plates below all come with d-rings for the safety chains as well as gussets for added strength. Buyers Products Fabricators Hitch Plate: part # 3371809040 (1/2" thick x 34-5/8" wide x 15-5/8" tall) Buyers Products Fabricators Hitch Plate: part # 3371809042 (5/8" thick x 34-1/2"...
  view full answer...
• How To Add a 2" Trailer Hitch Receiver to Semi Tractor
  The best option we offer for installing standard trailer hitches on semi-tractors is with the Buyers Products Fabricators Hitch Plates which will be welded to the back of the frame with extra bracing and gussets. This will require professional installation from a metal fabricator. There are many sizes for these plates such as part # 3371809027A which is 34-1/2" wide x 25-1/2" tall. I have attached the other size options below. The standard 2" can be had using the Buyers Products Black...
  view full answer...
• Solution for Bolt-On Hitch Plate for 2001 International Trucks 4700
  The best option we have for your 2001 International 4700 is going to be a weld-on hitch plate. Unfortunately there are no bolt on options available for your truck. Make sure to use an experienced welder for installation of the hitch plate. We have the following hitch plates available: Buyers Products Fabricators Hitch Plate - 5/8" x 34-1/2" x 22-1/2" # 3371809043 Buyers Products Fabricators Hitch Plate - 1/2" x 34-5/8" x 15-5/8" # 3371809040 Buyers Products Fabricators Hitch Plate -...
  view full answer...
• Is Mounting Hardware Needed for Buyers Products Fabricators Hitch Plate & Tow Ready Pintle Hook
  There actually won't be any bolts needed at all for the hitch plate and pintle hook you mentioned. The reason is that you will weld on the Buyers Products Fabricators Hitch Plate # 3371809027A, and the mounting bolts actually come with the Pintle Hook # C48215.
  view full answer...
• Recommended Trailer Hitch for International 4700 Series Truck
  The best trailer hitch option we'll have for an International 4700 Series Truck is the Buyers Products Fabricators Hitch Plate part # 3371809027A. This is a hitch plate that will be used for custom fabrication. It can then be outfitted with a receiver tube, pintle hook, etc. I have attached some other plate size options for you in a list below.
  view full answer...
• Mounting Options for Buyers Products 30 Ton Pintle Hook
  Although we do offer the mounting kit # 3378530, there are no specific plates we carry capable of handling the same capacity as the # 337PH30. The only option would be the Buyers Products Weld-On Pintle Hitch Plate # 3371809027A. However, this would require custom fabrication to be compatible with the pintle hook. It would also take additional reinforcement to be able to handle the same weight as the hook. It does not have a specific weight rating, but similar custom-fit Buyers hitch...
  view full answer...
• Highest Capacity Pintle Hook that Can Fit Buyers Products Hitch Plates
  The highest capacity pintle hook that can fit on the Buyers Products Fabricators Hitch Plate - 3/4inch x 34-1/2inch x 22-1/2 Item # 3371809027A you referenced is the part # 33710042 which has the non-offset mounting bolts like you mentioned and has a 40k capacity.
  view full answer...
• Is There a Buyers Products Hitch Plate that Could Fit 1997 Freightliner FLD112
  The Buyers Products Fabricators Hitch Plate # 3371809027A that you referenced is a universal fit hitch plate that has dimensions of 34-1/2" wide x 25-1/2" tall. If this would work well on your 1997 Freightliner FLD112 dimension-wise it would be a great choice. The # 3371809060A is for Ford trucks and most likely wouldn't be what you'd need. We have quite a few different hitch plates with different dimensions that could work for you as well. I attached a link to a page that has all of...
  view full answer...
• Pintle Hitch Plate For GMC Brigadier
  For a pintle hitch plate for your GMC Brigadier you'll have to get something that is a weld-on option, the Buyers Products Weld-On Pintle Hitch Plate - 34-1/2" Wide x 23-1/2" Tall # 3371809027A.
  view full answer...
• Recommended Hitch Plate for 2021 Interational CV515
  For your 2021 International CV515 you will need to use a universal weld-on hitch plate. There are no custom hitch plates available that will fit your truck. We have three different options. Buyers Products Fabricators Hitch Plate - 3/4" x 34-1/2" x 22-1/2" # 3371809027A Buyers Products Fabricators Hitch Plate - 5/8" x 34-1/2" x 15-1/2" # 3371809042 Buyers Products Fabricators Hitch Plate - 1/2" x 34-5/8" x 15-5/8" # 3371809040 You would need to have a professional welder perform the installation....
  view full answer...
• Buyers Products Fabricators Hitch Plate Kits For a 2006 GMC Topkick 7500
  I recommend one of the Buyers Products Fabricators Hitch Plate Kits for your 2006 GMC Topkick 7500 as there is not a hitch plate specific to your vehicle. Here are the ones we carry. Buyers Products Fabricators Hitch Plate - 3/4" x 34-1/2" x 22-1/2" # 3371809027A Buyers Products Fabricators Hitch Plate - 5/8" x 34-1/2" x 22-1/2" # 3371809043 Buyers Products Fabricators Hitch Plate - 1/2" x 34-5/8" x 15-5/8" # 3371809040 Buyers Products Fabricators Hitch Plate - 5/8" x 34-1/2" x 15-1/2"...
  view full answer...
• Solution for Hitch Plate for 1996 International 4700 LPX
  According to Buyers Products, the # 3371809065 is designed to fit the Chevy/GMC model 3500 cab and chassis. For your 1996 International 4700 LPX you will need to use a universal weld-on hitch plate. Unfortunately, there are no custom hitch plates available that will fit your truck. We have the following options. Buyers Products Fabricators Hitch Plate - 3/4" x 34-1/2" x 22-1/2" # 3371809027A Buyers Products Fabricators Hitch Plate - 5/8" x 34-1/2" x 15-1/2" # 3371809042 Buyers Products...
  view full answer...
• Can etrailer Modify Buyers Products Pintle Hitch Plate to Fit Buyers Products 50 Ton Pintle Hook
  Hello Craig; you are correct that the holes for the # 337PH55AC and # 3371809027A do not line up. All of the hitch plates come as is, we do not have a way to add holes to match specific attachments. If you want to use the hitch plate with this pintle hook you will need to modify it yourself or take it to someone else who can.
  view full answer...
• Pintle Hook Recommendation for Buyers Products Fabricators Hitch Plate
  The Buyers Products Fabricators Hitch Plate part # 3371809027A is designed to work with pintle hooks that have a 1-3/4" x 3-3/8" wide bolt pattern like the Bolt-On Pintle Hook part # C48231. This is a standard pattern that most pintle hooks use so if you have a few already they should fit.
  view full answer...

Do you have a question about this Hitch Fabrication Part?