The 8 holes in this pintle plate provide 3 different mounting positions for your pintle hitch so that you can match your trailer height. The shank slides inside your 2-1/2" x 2-1/2" hitch receiver. Durable carbide black powder coat finish.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to be taking a look at the Curt Pintle Hook Mounting Plate for a 2-1/2" by 2-1/2" trailer hitch receiver. This hitch mounted adapter plate provides a mounting point for a pintle hook, accessories for the front of the plate are going to be sold separately, so if you're in need you can check out some options here at etrailer.com. This unit's going to feature a three-position mount. It's going to let you customize the height of the pintle. The plate can be used in the drop position or it can be flipped over and used in the rise position as well. The unit's made from a sturdy steel construction. You'll notice that it does feature a solid steel shank.
It's going to feature a durable carbide black powder coated finish, so it's going to do a great job at resisting rust and corrosion. Now to get it secured in your hitch it will require a hitch pin and clip or a hitch lock. Those items are sold separately. The pin holes on this unit will accept a standard 5/8" diameter pin. The product's made right here in the USA. Again it is designed for a 2-1/2" by 2-1/2" trailer hitch receiver.
It's going to offer a weight capacity of 18,000 pounds. A few measurements to go over with real quick starting here at the mounting plate. Edge to edge this direction is going to measure 5". Overall height, so bottom to top, is going to measure 7-1/2". The overall length of the unit from very back of the shank to very front of the unit measures 12-3/16". From the center of the hitch pin hole to the front of the unit, so from this point here to this point here, that's going to give us a measurement of about 8-1/16".
From the center of the hitch pin hole to the back of the shank measures right at 4". Then when it comes to the mount hole separations, so center on center going up and down and side to side, so we'll do side to side first. That's going to give us a measurement, side to side, of about 3-3/8". Then going this direction, those holes are going to be separated apart from one another on center by about 1-3/4". Then the diameter of those is going to be about 9/16". That's going to do it for today's look at the Curt Pentil Hook Mounting Plate for a 2-1/2" hitch..
Average Customer Rating: 4.9 out of 5 stars (133 Customer Reviews)
The 8 holes in this pintle plate provide 3 different mounting positions for your pintle hitch so that you can match your trailer height. The shank slides inside your 2-1/2" x 2-1/2" hitch receiver. Durable carbide black powder coat finish.Well built and very heavy. Exact replacement for my 2 inch assembly from my old truck's pintle plate.
Previous customer, I purchase all the towing equipment for my sons demolition company.
etrailer is always my first stop when I am tasked with finding needed equipment.....this because the site is easy to navigate and provides excellent information relative to capacity and fitment.
Whether I am in need of electrical repair parts or hard towing components, etrailer has the right stuff at fair prices.
A really great source for all my equipment needs.
Great product, looks great and very heavy duty.
Great Job and quick service
This is a very good quality pintle hitch. The cost is very reasonable.
This product is quality made. Couldn't of made it better myself and,reasonably priced too
Very heavy duty, works really well in my Duramax
The product was as advertised and your costumer service staff is GREAT!
Easy purchasing. Fast delivery. Good quality fit like a glove.
Was what I was looking for at a good pr ice.
Product as described. Well made.
Great
very stout
Excellent product and customer service!
Review from a similar Curt Adjustable Pintle Mount in Pintle Hitch
Robust! This pintle mount plate is a monster! Fitment to my 2013 Toyota 4Runner 2” hitch is great, and precisely the size I was looking for, given rear hatch access,(The rear hatch swings free and clear) and pintle hook rise requirements. I easily went from 17” to 26” off the pavement! Photos will show the additional reflective tape I applied to necessitate a safe night’s drive. Photos show the really nice locking pin that secures the mount plate. Special kudos to Jessie at etrailer customer service to expertly assist me in the selection discussion- what a joy! Delivery was ahead of schedule and the product met my specifications! Now let’s get on the road and see how she runs!
Review from a similar Curt Adjustable Pintle Mount in Pintle Hitch
The 30,000Lb pintle hitch bolted on this plate with ease...This plate has just the right amount of adjustments to suit different trailer/tow vehicle heights.
Review from a similar Curt Adjustable Pintle Mount in Pintle Hitch
Solid and heavy built product. Lined up perfectly with the 3” down to 2.5” sleeve I previously ordered for my F250 3” receiver. Awaiting the pintle ball combo I ordered to bolt up to this plate. Thanks for the speedy service.
Review from a similar Curt Adjustable Pintle Mount in Pintle Hitch
Allowed me to really get my trailer at right level
Review from a similar Curt Adjustable Pintle Mount in Pintle Hitch
Awesome hitch, would pull the frame out from under the truck before this hitch would fail….
Review from a similar Curt Adjustable Pintle Mount in Pintle Hitch
The pintle hitch mounting plate is just what I needed and better than I expected.
Thanks
Review from a similar Curt Adjustable Pintle Mount in Pintle Hitch
This 2 1/2” Curt Pintle Hook Mounting Plate is as described. Very well made. Have not used it, but I have mounted it to a Curt pintle hook.
Very pleased with my purchase.
Review from a similar Curt Adjustable Pintle Mount in Pintle Hitch
Very fast at delivering and decent hitch
Review from a similar Curt Adjustable Pintle Mount in Pintle Hitch
mounting plante has worked perfectly. it is the only one that i could find that was rated for the weight when mounted upright or down when using a 2" reciever. shows no signs of fatigue after a year of towing a 3500lb trailer with a 13,000lb escavator several times a week. very satisfied with purchase
Review from a similar Curt Adjustable Pintle Mount in Pintle Hitch
As I stated with the pintle hitch everything is ruggerder than I had imagined it would be. This set up is going to help me out like no tomorrow. Thanks for your quality of products & speedy delivery!
Review from a similar Curt Adjustable Pintle Mount in Pintle Hitch
Exactly what I needed to level pulling my military trailer. The pintle hitch bolted to the mounting plate within a few minutes. Now I can get into the back country with my FJ pulling a trailer made possible by the your pintle hitch/mounting plate Combination.
Thanks
Do you have a question about this Pintle Hitch?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.