To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
The Thule TracRac SR Sliding Truck Bed Ladder Rack w/ Cantilever can handle serious work and weekend hauls alike. It carries up to 1,250 lbs, with a cantilever extension that adds 32" of over-cab support so you can safely carry long materials like ladders, lumber, or pipes. The crossbars sit at full over-cab height, giving you the space to haul oversized gear without it hanging off the back. The cantilever also removes easily when you don’t need the extra reach.
The rack slides smoothly along unique T-track base rails mounted in your truck bed, so you can position the uprights anywhere along the rails. Move the crossbars close together for short gear or spread them out for long loads. When you’re not hauling, slide both uprights together at the front of the bed for full rear access and better aerodynamics. The integrated quick-release clamping knobs make adjustments easy—loosen, slide, and tighten back down, no tools needed.
Built from 6000-series aluminum, this rack is both strong and lightweight. The material won’t rust, and the dual-stage powder coat—an e-coat followed by a clear coat—adds extra protection against scratches and corrosion. That means you get the strength of a heavy-duty system without loading down your truck or worrying about rust eating into it over time. The wide base design adds stability, so it holds steady even under full load.
The elliptical crossbars are shaped to cut through the wind instead of catching it, keeping the ride quiet even at highway speeds. Built-in airfoil trip strips stop air from whistling through the slots, so you don’t get that high-pitch noise that some racks make. You can focus on the drive instead of the wind noise behind you.
Eight tie-downs come standard—four load stops that slide in the crossbar tracks and four side cleats that mount to the uprights. The load stops lock in place to keep ladders, lumber, or pipes from shifting, while the cleats give you extra anchor points for straps. Together they make it easy to tie down just about anything quickly and securely.
Installation is simple with the no-drill design. The base rails mount right into the stake pockets of your truck bed, so you don’t have to make any permanent changes. Once mounted, you’ve got a rock-solid foundation for every job or adventure ahead.
Alternate Instructions
Ratings & Reviews
Great transaction and shipping was earl y.
Its an excellent rack system. The only complaint I have that keeps it from 5 stars is the knobs to lock the slides in place are difficult to use due to the shape, I'd prefer a wind nut style for leverage and the hardware corroded substantially within 6 months and everything had to be removed and cleaned and reinstalled with antisieze to keep everything operational. Other than that it is an awesome set up and gets the job done.
Great product, super easy install. No drill application is wonderful and fast so I can put it to work to pay for itself, less than 2 hr installation.
Shipping was quick As described Easy to assemble. Wish the kit had one set of directions so I wouldn't have had to take the front rack apart after the fact. The final bolts for the canteleaver seem to be a damage/ scratch hazard.
Looks pretty slick though.
The parts came in on time and Lauren stayed in contact with me throughout the whole process. She is incredible at what she does and my racks look great and function perfectly for my construction needs! Thanks etrailer!
Product is great and installed easily once I figured out that for my Ram 1500 Laramie, the pocket stakes are too big for the rubber blocks and won't work and I did have to drill thru the plastic molding. Once I figured out the stake holes wouldn't work I looked at the drawing again and the holes where Tundra is listed gave me the idea to try those. Those holes worked on the Ram and I ended up drilling out the "spikes" that hold the molding onto the sheet metal. No drilling thru the sheet metal was required, only the plastic.
Maybe I missed an install video for the Ram, it would have made the install much quicker and I wouldn't have to buy covers for my now cut out front stake pocket holes which weren't covered by the rails as I hoped they would.
I haven't installed the cantilever as I don't need it yet.
The rack system is very well put together. I only had a couple of issues with the instalation.
There wasn't any directions with the base rails, so it took a bit to figure out how it went together and what holes to use for my truck.
The canteilever kit, The top bolt that holds the cross bar should be a button screw and square nut, not a square head bolt and nut. with the square head bolt and nut it could interfere with a long load since it sticks up and could catch on anything being loaded . All and all a nice rack.
I got this type of rack hoping that I could slide the rear post forward as to not interfere with my 5th wheel when towing it.
That part is yet to be dedurmined.
I purchased the front rack with the cantilever over hang, toolbox track kit and rear rack and locking knobs.
Very happy with the final product.
Thanks.
The product was super easy to install and it’s very stout even though it’s technically a ladder rack. I am in the water well business and use it for hauling my pipe galvanized, PVC you name it. I did have a little issue with two of the uprights but nothing that couldn’t stop me from installing it, I reached out to the support team and Joshua B was extremely helpful. They sent out replacement parts with a few days to make it right with me. I greatly appreciate all of their help.
This is an awesome system, and in my opinion, the best option to pair with the Retrax ProMX bed cover. The sliding rails for adjustable distance is awesome. Can't beat the versatility of this rack, and after adding additional load stops for cantilever rail, bolt on ratchet straps, and base rail tie down points (which will actually allow me to haul things on top of my bed cover, which is rated to carry 500lbs) this system completely changes my ability to haul whatever I need in my truck.
Great system
Fast shipping very res ponsive
Love it! kayaks, ladders anything too long to fit in a five and three-quarter bed go on the ladder rack. It slides out of the way when I have big bulky things like refrigerator to put in the back of the truck. And I got to keep the tonneau cover that came with the truck.
I ordered the TracRac SR (sliding rack) for my 2019 Ram 3500. It took a while to get here, probably due to the current situation weall in. It came in 3 boxes on 2 days. (Just so you know what you'll be looking for) everything was packaged very secure in the boxes. I order the Cantilever with mine, so I had to swap out a couple parts. No big deal. Everything was explained in the instructions. It took me about 3 hours to install. The hardest part was getting the bed rails to align. I got them within 1/16th of an inch. Good enough.
The rack is a great addition to the truck. I stepped down from an 8ft bed to this 6ft 4in bed. So this was a necessity. The rack is solid. I'll be putting it to work right away
The TH43002XT-781EX installed onto my 2016 GMC 2500 HD Sierra 6-1/2 bed Denali pickup truck without drilling any holes. Total install time including the cantilever took about 2 1/2 hours with two people. The tools we used included a wide range of metric hex keys, a crescent and some metric open-endeds.
The base rails mounted to the bed rails using a threaded aluminum insert for the rear stake pockets (which align with a thru-hole already present in the bed) and an expanding rubber bushing for the front stake pockets (since the front pockets don't have a thru-hole). Evidently some pickup rails cant to one side or another so the base rail install kit includes shims but my truck did not require them.
Once installed the rails are rock solid and subsequently the racks are also rock solid. The cantilever comes with replacement saddles that mount up to the rack with a total of 12 bolts making the ensemble nearly missile proof. Almost all bolts are pre-treated with thread locker.
My truck already has knobby tires so I did not notice any particular additional wind noise.
My plan for the TracRac is to attach a custom mounted Rhino-Rack, which we'll be doing ourselves.
I like this product because the fitment on etrailer was reliable and I did not have to drill any holes or use any special tools. The rack is also ridiculously heavy duty, which is more than up to the job of holding the Rhino-Rack I'm going to custom fit to it. We'll be doing some off-roading so this heavy equipment gives me a lot of confidence.
Thule always makes great products and I am delighted with the TracRac and I'm very happy with etrailer's site.
Pretty good ladder rack. I like having the ability to slide the racks if needed. The install is doable. If you are installing the cantilever, make sure you swap out the top mount before assembling the top bar. The legs come pre-assembled with the regular top mount from the factory. The regular top mount has to be removed and the cantilever top mount installed to assemble the cantilever part of the ladder rack. Also, the bolts that hold the top mount on have loctite on them from the factory and are really hard to remove. I ended up stripping the bolts out. etrailer was very helpful and sent me a replacement hardware kit with all the bolts needed to finish the install. Between the directions provided and a few YouTube videos, the install was pretty straightforward. I am very happy with the product overall.
I just received the Thule rack, so have not installed them yet. The service from etrailer was outstanding!
Good quality material.
Fast shippi ng
I bought these for my 2018 Ford F 150 5.5foot bed.
These are definitely one of the more expensive ladder racks you can buy but totally worth it. Very high quality and easy to install. I bought these for the ease of removal.
I use etrailer.com for all my vehicle needs.
The movable rack let's it be mostly out of the way when not in use without removing from truck. The high load rating plus cantilever let's me haul long semi flexible objects (the flexing puts a significant strain on the rack)even with a shorter bed.
The ladder rack is awesome +
It took 3 times to get the right parts -
Special thank you to Tiffini S. from customer support center, she was very professional and helpfull.
Just installed this rack by myself. Fairly easy and took less then 2 hours to do. Looks really great on the truck
Delivery in three days. Three boxes. Exactly what I wanted to carry our Kayaks and ladders across the country to our new home.
Does the trick. Benefits from occasional tightening and adjustment. The sliding vertical brackets on top are finicky. Very handy attachment points for bungees and straps.
Do you have a question about this Ladder Rack?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.